Synergistic fire retardant effect between expandable graphite and ferrocene-based non-phosphorus polymer on polypropylene

Research on Thermal Stability and Flammability of Wood Scob-Based Loose-Fill Thermal Insulation Impregnated with Multicomponent Suspensions

Loose-fill thermal composite insulation produced from surface-modified wood scobs has been explored as a potential fire-resistant material for building envelopes. This work involves fire resistance behavior comparisons between four coating systems consisting of liquid glass, liquid glass-tung oil, liquid glass-expandable graphite, and liquid glass-tung oil-expandable graphite. The techniques of thermogravimetric and differential thermogravimetric analyses, gross heat combustion via a calorimetric bomb, cone calorimetry, SEM imaging of char residues, and energy dispersive spectrometry for elemental analysis, as well as propensity to undergo continuous smoldering, were implemented. The coating technique resulted in greater thermal stability at a higher temperature range (500-650 °C) of the resulting loose-fill thermal composite insulation, reduced flame-damaged area heights after the exposure of samples at 45° for 15 s and 30 s, with a maximum of 49% decreased gross heat combustion, reduced heat release and total smoke release rates, improved char residue layer formation during combustion and changed smoldering behavior due to the formation of homogeneous and dense carbon layers. The results showed that the highest positive impact was obtained using the liquid glass and liquid glass-expandable graphite system because of the ability of the liquid glass to cover the wood scob particle surface and form a stable and strong expanding carbon layer.

Mechanical, Flame-Retardant and Dielectric Properties of Intumescent Flame Retardant/Glass Fiber-Reinforced Polypropylene through a Novel Dispersed Distribution Mode

The application of continuous glass fiber-reinforced polypropylene thermoplastic composites (GF/PP) is limited due to the inadequate flame retardancy of the polypropylene (PP) matrix. Apart from altering the composition of the flame retardants, the distribution modes of flame retardants also impact material performance. In this study, an alternative approach involving non-uniform distribution is proposed, namely, dispersed distribution, in which non-flame-retardant-content layers (NFRLs) and/or low-flame-retardant-content layers (LFRLs) are dispersed among high-flame-retardant-content layers (HFRLs). The mechanical, flame retardant and dielectric properties of GF/PP with intumescent flame retardant (IFR/GF/PP) are investigated comparatively under uniform, gradient, and dispersed distributions of the flame retardants. The results demonstrate that non-uniform distribution exhibits superior flame retardant performance compared to uniform distribution. Dispersed distribution enables IFR/GF/PP to attain enhanced mechanical properties and reduced dielectric constants while maintaining excellent flame-retardant properties.

Analyzing Temperature Distribution Patterns on the Facing and Backside Surface: Investigating Combustion Performance of Flame-Retardant Particle Boards Using Aluminum Hypophosphite, Intumescent, and Magnesium Hydroxide Flame Retardants

Particle boards are manufactured through a hot pressing process using wood materials (natural polymer materials) and adhesive, which find common usage in indoor decorative finishing materials. Flame-retardant particleboard, crucial for fire safety in such applications, undergoes performance analysis that includes assessing temperature distribution across its facing surface and temperature increase on the backside surface during facade combustion, yielding critical insights into fire scenario development. In this study, a compact flame spread apparatus is utilized to examine the flame retardancy and combustion behavior of particle boards, with a specific emphasis on the application of cost-effective flame retardants, encompassing aluminum hypophosphite (ALHP), an intumescent flame retardant (IFR) comprising ammonium polyphosphate (APP), melamine (MEL), and Dipentaerythritol (DPE), alongside magnesium hydroxide (MDH), and their associated combustion characteristics. The D300°C values, representing the vertical distance from the ignition point (IP) to P300°C (the temperature point at 300 °C farthest from IP), are measured using a compact temperature distribution measurement platform. For MDH/PB, APP + MEL + DPE/PB, and ALHP/PB samples, the respective D300°C values of 145.79 mm, 117.81 mm, and 118.57 mm indicate reductions of 11.11%, 28.17%, and 27.71%, compared to the untreated sample's value of 164.02 mm. The particle boards treated with ALHP, IFR, and MDH demonstrated distinct flame-retardant mechanisms. MDH/PB relied on the thermal decomposition of MDH to produce MgO and H2O for flame retardancy, while APP + MEL + DPE/PB achieved flame retardancy through a cross-linked structure with char expansion, polyphosphate, and pyrophosphate during combustion. On the other hand, ALHP/PB attained flame retardancy by reacting with wood materials and adhesives, forming a stable condensed P-N-C structure. This study serves as a performance reference for the production of cost-effective flame-resistant particleboards and offers a practical method for assessing its fire-resistant properties when used as a decorative finishing material on facades in real fire situations.

Emerging trends in flame retardancy of rigid polyurethane foam and its composites: A review

Owing to the superior thermal insulating attributes of rigid polyurethane foam (RPUF) compared to other insulating materials (expanded and extruded polystyrene, mineral wool), it remains the most dominant insulating material and most studied polymer foam. Like other polyurethane foam, RPUF is highly flammable, necessitating the incorporation of flame retardants (FR) during production to lower combustibility, promoting its continuous use as insulation material in construction, transportation, and others. The popular approaches for correcting the high flammability of RPUF are copolymerization and blending (with FR). The second method has proven to be most effective as there are limited trade-offs in RPUF properties. Meanwhile, the high flammability of RPUF is still a significant hindrance in emerging applications (sensors, space travel, and others), and this has continuously inspired research in the flame retardancy of RPUF. In this study, properties, and preparation methods of RPUF are described, factors responsible for the high flammability of PUF are discussed, and flame retardancy of RPUF is thoroughly reviewed. Notably, most FR for RPUF are inorganic nanoparticles, lignin, intumescent FR systems of expandable graphite (EG), ammonium polyphosphate (APP), and hybridized APP or EG with other FR. These could be due to their ease of processing, low cost, and being environmentally benign. Elaborate discussion on RPUF FR mechanisms were also highlighted. Lastly, a summary and future perspectives in fireproofing RPUF are provided, which could inspire the design of new FR for RPUF.

Development and Characterization of High Environmentally Friendly Composites of Bio-Based Polyamide 1010 with Enhanced Fire Retardancy Properties by Expandable Graphite

Bio-based polyamide 1010 was melt-compounded with different percentages (2.5 to 10.0 wt.%) of expandable graphite (EGr) as an environmentally friendly solution to improve the flame retardancy properties. The mechanical, morphological, thermal and fire retardancy properties (among others) are analysed. The novelty of the article lies in the use of fully removable polyamide. The effect of the incorporation of EGr in the properties of this polymer was analysed and characterised. The incorporation of EGr into the PA1010 matrix led to very promising results. Mechanically, the EGr provided increased stiffness and a tensile strength up to 7.5 wt.%, verifying good mechanical performance. The DMTA results also show how the incorporation of EGr in the PA1010 matrix clearly increases the stiffness of the composites over the entire temperature range analysed. In terms of physical properties, water absorption of PA1010 was reduced particularly in the 10% EGr, which reduces the water absorption of PA1010 by 20%. In terms of flame retardant properties, with the incorporation of EGr, a significant reduction in the heat release rate (HRR) values as the concentration of the additive increases and a reduction in the maximum peak heat release rate (pHRR) can be observed for all compounds. In particular, it goes from 934 kW/m2 for neat polyamide to a value of 374 kW/m2 with 10% EGr. Finally, an improvement in the UL-94 rating of the 7.5 and 10% EGr composites was also observed, going from V-2 in the PA to V-1 in these composites.

Preparation of Mn2+ Doped Piperazine Phosphate as a Char-Forming Agent for Improving the Fire Safety of Polypropylene/Ammonium Polyphosphate Composites

A piperazine phosphate doped with Mn2+ (HP-Mn), as a new char-forming agent for intumescent flame retardant systems (IFR), was designed and synthesized using 1-hydroxy ethylidene-1,1-diphosphonic acid, piperazine, and manganese acetate tetrahydrate as raw materials. The effect of HP-Mn and ammonium polyphosphate (APP) on the fire safety and thermal stability of polypropylene (PP) was investigated. The results showed that the combined incorporation of 25 wt.% APP/HP-Mn at a ratio of 1:1 endowed the flame retardant PP (PP6) composite with the limiting oxygen index (LOI) of 30.7% and UL-94 V-0 rating. In comparison with the pure PP, the peak heat release rate (PHRR), the total heat release (THR), and the smoke production rate (PSPR) of the PP6 were reduced by 74%, 30%, and 70%, respectively. SEM and Raman analysis of the char residues demonstrated that the Mn2+ displayed a catalytic cross-linking charring ability to form a continuous and compact carbon layer with a high degree of graphitization, which can effectively improve the flame retardancy of PP/APP composites. A possible flame-retardant mechanism was proposed to reveal the synergistic effect between APP and HP-Mn.

Flame retardancy effects between expandable graphite and halloysite nanotubes in silicone rubber foam

The effect of expandable graphite (EG) and modified halloysite nanotubes (HNTs) on the flame retardant properties of silicone rubber foam (SiF) was studied in this paper. Modified HNTs were obtained by surface modification of the silane-coupling agent A-171. The flame retardancy of SiF was studied by limiting oxygen index (LOI), vertical combustion and cone calorimeter tests. The mechanical properties of SiF were analyzed by a universal mechanical testing machine. The LOI results showed that EG/HNTS@A-171 could enhance the LOI of SiF. The cone calorimeter test results showed that EG/HNTS@A-171 effectively reduced the peak heat release rate, the total heat release rate, the smoke production rate, the total smoke production rate, the CO production rate and the CO2 production rate and increased the carbon residue rate. TGA shows that main chain pyrolysis temperature of the SiF is delayed by 123 °C. The mechanical properties test results showed that EG/HNTS@A-171 improved the tensile strength of SiF. These results indicated that EG/HNTS@A-171 can significantly improve the flame retardant performance of SiF.

Flame Retardancy of Biobased Composites-Research Development

Due to the thermal and fire sensitivity of polymer bio-composite materials, especially in the case of plant-based fillers applied for them, next to intensive research on the better mechanical performance of composites, it is extremely important to improve their reaction to fire. This is necessary due to the current widespread practical use of bio-based composites. The first part of this work relates to an overview of the most commonly used techniques and different approaches towards the increasing the fire resistance of petrochemical-based polymeric materials. The next few sections present commonly used methods of reducing the flammability of polymers and characterize the most frequently used compounds. It is highlighted that despite adverse health effects in animals and humans, some of mentioned fire retardants (such as halogenated organic derivatives e.g., hexabromocyclododecane, polybrominated diphenyl ether) are unfortunately also still in use, even for bio-composite materials. The most recent studies related to the development of the flame retardation of polymeric materials are then summarized. Particular attention is paid to the issue of flame retardation of bio-based polymer composites and the specifics of reducing the flammability of these materials. Strategies for retarding composites are discussed on examples of particular bio-polymers (such as: polylactide, polyhydroxyalkanoates or polyamide-11), as well as polymers obtained on the basis of natural raw materials (e.g., bio-based polyurethanes or bio-based epoxies). The advantages and disadvantages of these strategies, as well as the flame retardants used in them, are highlighted.