Effect of altering photocrosslinking conditions on the physical properties of alginate gels and the survival of photoencapsulated cells

Evaluation of Various Types of Alginate Inks for Light-Mediated Extrusion 3D Printing

Naturally derived biopolymers modifying or combining with other components are excellent candidates to promote the full potential of additive manufacturing in biomedicine, cosmetics, and the food industry. This work aims to develop new photo-cross-linkable alginate-based inks for extrusion 3D printing. Specifically, this work is focused on the effect of the addition of cross-linkers with different chemical structures (polyethylene glycol diacrylate (PEGDA), N,N'-methylenebisacrylamide (NMBA), and acrylic acid (AA)) in the potential printability and physical properties of methacrylated alginate (AlgMe) hydrogels. Although all inks showed maximum photo-curing conversions and gelation times less than 2 min, only those structures printed with the inks incorporating cross-linking agents with flexible and long chain structure (PEGDA and AA) displayed acceptable size accuracy (~0.4-0.5) and printing index (Pr ~1.00). The addition of these cross-linking agents leads to higher Young's moduli (from 1.6 to 2.0-2.6 KPa) in the hydrogels, and their different chemical structures results in variations in their mechanical and rheological properties. However, similar swelling ability (~15 swelling factor), degradability (~45 days 100% weight loss), and cytocompatibility (~100%) were assessed in all the systems, which is of great importance for the final applicability of these hydrogels.

Photo-cross-linked Hydrogels for Cartilage and Osteochondral Repair

Photo-cross-linked hydrogels, which respond to light and induce structural or morphological transitions, form a microenvironment that mimics the extracellular matrix of native tissue. In the last decades, photo-cross-linked hydrogels have been widely used in cartilage and osteochondral tissue engineering due to their good biocompatibility, ease of fabrication, rapid in situ gel-forming ability, and tunable mechanical and degradable properties. In this review, we systemically summarize the different types and physicochemical properties of photo-cross-linked hydrogels (including the materials and photoinitiators) and explore the biological properties modulated through the incorporation of additives, including cells, biomolecules, genes, and nanomaterials, into photo-cross-linked hydrogels. Subsequently, we compile the applications of photo-cross-linked hydrogels with a specific focus on cartilage and osteochondral repair. Finally, current limitations and future perspectives of photo-cross-linked hydrogels are also discussed.

Three-Dimensional Bioprinting of Biocompatible Photosensitive Polymers for Tissue Engineering Application

Three-dimensional (3D) bioprinting, or additive manufacturing, is a rapid fabrication technique with the foremost objective of creating biomimetic tissue and organ replacements in hopes of restoring normal tissue function and structure. Generating the engineered organs with an infrastructure that is similar to that of the real organs can be beneficial to simulate the functional organs that work inside our bodies. Photopolymerization-based 3D bioprinting, or photocuring, has emerged as a promising method in engineering biomimetic tissues due to its simplicity, and noninvasive and spatially controllable approach. In this review, we investigated types of 3D printers, mainstream materials, photoinitiators, phototoxicity, and selected tissue engineering applications of 3D photopolymerization bioprinting.

Design of an imaging magnetic microsphere based on photopolymerization for magnetic hyperthermia in tumor therapy

Magnetic hyperthermia therapy has been widely used in the nonsurgical treatment of patients with advanced stage cancers that cannot be treated by surgery. It is minimally invasive, precise, and highly efficient and has a good curative effect. In this paper, a magnetic microsphere with Fe3O4 was prepared for thermal therapy and imaging based on a photoinitiated suspension polymerization method from biallelic monomers. The preparation method clearly minimized the degradative chain transfer of allyl polymerization reactions. The microspheres were characterized by microscope observation, spectral analysis, thermal analysis, and magnetic testing. The magnetothermal effect was detected by an infrared thermal imager in vitro and in vivo under a high-frequency alternating magnetic field (AMF). The antitumor effect was verified by testing the viability of H22 cells and observing a tumor-bearing mouse model under high-frequency AMF. Biocompatibility was evaluated by cell viability assay, tissue section observation, and blood biochemical analysis. The imaging capacity was tested by X-ray, MRI, and CT imaging experiments. The results show that the product has good dispersibility, thermal stability, superparamagnetism, and biocompatibility. Under the action of an AMF, the magnetic hyperthermia effect in tumor-bearing mice was better, and an antitumor effect could be achieved.

Alginate: Microbial production, functionalization, and biomedical applications

Alginates are natural polysaccharides widely participating in food, pharmaceutical, and environmental applications due to their excellent gelling capacity. Their excellent biocompatibility and biodegradability further extend their application to biomedical fields. The low consistency in molecular weight and composition of algae-based alginates may limit their performance in advanced biomedical applications. It makes microbial alginate production more attractive due to its potential for customizing alginate molecules with stable characteristics. Production costs remain the primary factor limiting the commercialization of microbial alginates. However, carbon-rich wastes from sugar, dairy, and biodiesel industries may serve as potential substitutes for pure sugars for microbial alginate production to reduce substrate costs. Fermentation parameter control and genetic engineering strategies may further improve the production efficiency and customize the molecular composition of microbial alginates. To meet the specific needs of biomedical applications, alginates may need functionalization, such as functional group modifications and crosslinking treatments, to achieve enhanced mechanical properties and biochemical activities. The development of alginate-based composites incorporated with other polysaccharides, gelatin, and bioactive factors can integrate the advantages of each component to meet multiple requirements in wound healing, drug delivery, and tissue engineering applications. This review provided a comprehensive insight into the sustainable production of high-value microbial alginates. It also discussed recent advances in alginate modification strategies and alginate-based composites for representative biomedical applications.

Minimally invasive bone augmentation through subperiosteal injectable hydroxylapatite/laponite/alginate nanocomposite hydrogels

Bone augmentation has an enormous demand in oral clinical treatment. Although there are various options available for clinical management to address it, these approaches could increase patient suffering due to surgical trauma and even cause psychological trauma to the patients. Moreover, presently, there is still a lack of well-considered microinvasive bone augmentation systems to deal with this challenge. Herein, we newly developed a subperiosteal injectable and osteogenesis-promoting hydroxylapatite/laponite/alginate nanocomposite hydrogels to address the insufficient microinvasive bone augmentation strategies. The physical performances (like swelling profiles, degradation behaviors, mechanical properties, and surface morphologies) of the gels were determined, and can be slightly tuned through altering concentrations of laponite. The cytocompatibility test results show outstanding biocompatibility of the hydrogels. Furthermore, the in vitro testing for bone-inducing activity and in vivo determination of bone-augmentation in the rat cranial subperiosteum exhibit that the hydrogels significantly promoted rat periosteum-derived mesenchymal stromal cells (P-MSCs) osteogenic differentiation in vitro and bone augmentation in vivo. Therefore, the research reveals that the nanocomposite hydrogels possessing subperiosteal microinvasive injectability, osteogenesis-enhancing capability, and clinical applicability have extremely great potential application in subperiosteal microinvasive bone augmentation.

Modeling a Dynamic Printability Window on Polysaccharide Blend Inks for Extrusion Bioprinting

Extrusion-based bioprinting is one of the most widespread technologies due to its affordability, wide range of processable materials, and ease of use. However, the formulation of new inks for this technique is based on time-consuming trial-and-error processes to establish the optimal ink composition and printing parameters. Here, a dynamic printability window was modeled for the assessment of the printability of polysaccharide blend inks of alginate and hyaluronic acid with the intent to build a versatile predictive tool to speed up the testing procedures. The model considers both the rheological properties of the blends (viscosity, shear thinning behavior, and viscoelasticity) and their printability (in terms of extrudability and the ability of forming a well-defined filament and detailed geometries). By imposing some conditions on the model equations, it was possible to define empirical bands in which the printability is ensured. The predictive capability of the built model was successfully verified on an untested blend of alginate and hyaluronic acid chosen to simultaneously optimize the printability index and minimize the size of the deposited filament.

Hyaluronic acid based next generation bioink for 3D bioprinting of human stem cell derived corneal stromal model with innervation

Corneal transplantation remains gold standard for the treatment of severe cornea diseases, however, scarcity of donor cornea is a serious bottleneck. 3D bioprinting holds tremendous potential for cornea tissue engineering (TE). One of the key technological challenges is to design bioink compositions with ideal printability and cytocompatibility. Photo-crosslinking and ionic crosslinking are often used for the stabilization of 3D bioprinted structures, which can possess limitations on biological functionality of the printed cells. Here, we developed a hyaluronic acid-based dopamine containing bioink using hydrazone crosslinking chemistry for the 3D bioprinting of corneal equivalents. First, the shear thinning property, viscosity, and mechanical stability of the bioink were optimized before extrusion-based 3D bioprinting for the shape fidelity and self-healing property characterizations. Subsequently, human adipose stem cells (hASCs) and hASC-derived corneal stromal keratocytes were used for bioprinting corneal stroma structures and their cell viability, proliferation, microstructure and expression of key proteins (lumican, vimentin, connexin 43,α-smooth muscle actin) were evaluated. Moreover, 3D bioprinted stromal structures were implanted intoex vivoporcine cornea to explore tissue integration. Finally, human pluripotent stem cell derived neurons (hPSC-neurons), were 3D bioprinted to the periphery of the corneal structures to analyze innervation. The bioink showed excellent shear thinning property, viscosity, printability, shape fidelity and self-healing properties with high cytocompatibility. Cells in the printed structures displayed good tissue formation and 3D bioprinted cornea structures demonstrated excellentex vivointegration to host tissue as well asin vitroinnervation. The developed bioink and the printed cornea stromal equivalents hold great potential for cornea TE applications.

FRESH Bioprinting of Dynamic Hydrazone-Cross-Linked Synthetic Hydrogels

Dynamic covalent chemistry is an attractive cross-linking strategy for hydrogel bioinks due to its ability to mimic the dynamic interactions that are natively present in the extracellular matrix. However, the inherent challenges in mixing the reactive precursor polymers during printing and the tendency of the soft printed hydrogels to collapse during free-form printing have limited the use of such chemistry in 3D bioprinting cell scaffolds. Herein, we demonstrate 3D printing of hydrazone-cross-linked poly(oligoethylene glycol methacrylate) (POEGMA) hydrogels using the freeform reversible embedding of suspended hydrogels (FRESH) technique coupled with a customized low-cost extrusion bioprinter. The dynamic nature and reversibility of hydrazone cross-links enables reconfiguration of the initially more heterogeneous gel structure to form a more homogeneous internal gel structure, even for more highly cross-linked hydrogels, over a relatively short time (<3 days) while preserving the degradability of the scaffold over longer time frames. POEGMA hydrogels can successfully print NIH/3T3 fibroblasts and human umbilical vein endothelial cells while maintaining high cell viability (>80%) and supporting F-actin-mediated adhesion to the scaffold over a 14-day in vitro incubation period, demonstrating their potential use in practical tissue engineering applications.

Degradation-Kinetics-Controllable and Tissue-Regeneration-Matchable Photocross-linked Alginate Hydrogels for Bone Repair

Photocross-linked alginate hydrogels, due to their biodegradability, biocompatibility, strong control for gelling kinetics in space and time, and admirable adaptability for in situ polymerization with a minimally invasive approach in surgical procedures, have created great expectations in bone regeneration. However, hydrogels with suitable degradation kinetics that can match the tissue regeneration process have not been designed, which limits their further application in bone tissue engineering. Herein, we finely developed an oxidation strategy for alginate to obtain hydrogels with more suitable degradation rates and comprehensively explored their physical and biological performances in vitro and in vivo to further advance the clinical application for the hydrogels in bone repair. The physical properties of the gels can be tuned via tailoring the degree of alginate oxidation. In particular, in vivo degradation studies showed that the degradation rates of the gels were significantly increased by oxidizing alginate. The activity, proliferation, initial adhesion, and osteogenic differentiation of rat and rabbit bone marrow stromal cells (BMSCs) cultured with/in the hydrogels were explored, and the results demonstrated that the gels possessed excellent biocompatibility and that the encapsulated BMSCs were capable of osteogenic differentiation. Furthermore, in vivo implantation of rabbit BMSC-loaded gels into tibial plateau defects of rabbits demonstrated the feasibility of hydrogels with appropriate degradation rates for bone repair. This study indicated that hydrogels with increasingly controllable and matchable degradation kinetics and satisfactory bioproperties demonstrate great clinical potential in bone tissue engineering and regenerative medicine and could also provide references for drug/growth-factor delivery therapeutic strategies for diseases requiring specific drug/growth-factor durations of action.

Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities

The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.