Acetals moiety contained pH-sensitive amphiphilic copolymer self-assembly used for drug carrier

ATRP-based synthesis of a pH-sensitive amphiphilic block polymer and its self-assembled micelles with hollow mesoporous silica as DOX carriers for controlled drug release

The atom transfer radical polymerization (ATRP)-based synthesis of a pH-sensitive fluorescent polymer (PSDMA-b-POEGMA) was successfully prepared using 3,6-dibromo-isobutyramide acridine (DIA), an initiator with a fluorescent chromophore, to initiate a lipophilic monomer 2-styryl-1,3-dioxan-5-yl methacrylate (SDMA) and a hydrophilic monomer oligo(ethylene glycol) methyl ether (OEGMA), which contained a cinnamic aldehyde acetal structure. With the addition of hollow mesoporous silicon (HMS@C18), the pH-sensitive core–shell nanoparticles (HMS@C18@PSDMA-b-POEGMA) were developed via a self-assembly process as carriers for the anticancer drug doxorubicin (DOX) for drug loading and controlled release. The nanocomposites showed a higher drug loading capacity which was much higher than that observed using common micelles. At the same time, the polymer coated on the surface of the nanoparticles contains the fluorescent segment of an initiator, which can be used for fluorescence contrast of the cells. The nanocomposite carrier selectively inhibits human melanoma cell A375 relative to human normal fibroblasts GM. The in vitro results suggested that a smart pH sensitive nanoparticles drug delivery system was successfully prepared for potential applications in cancer diagnosis and therapy.

A pH-sensitive core–shell nanoparticle (HMS@C18@PSDMA-b-POEGMA) was developed via a self-assembly process as the carrier of anticancer drug doxorubicin (DOX) for drug loading and controlled release.

Bioresponsive drug delivery systems for the treatment of inflammatory diseases

Inflammation is intimately related to the pathogenesis of numerous acute and chronic diseases like cardiovascular disease, inflammatory bowel disease, rheumatoid arthritis, and neurodegenerative diseases. Therefore anti-inflammatory therapy is a very promising strategy for the prevention and treatment of these inflammatory diseases. To overcome the shortcomings of existing anti-inflammatory agents and their traditional formulations, such as nonspecific tissue distribution and uncontrolled drug release, bioresponsive drug delivery systems have received much attention in recent years. In this review, we first provide a brief introduction of the pathogenesis of inflammation, with an emphasis on representative inflammatory cells and mediators in inflammatory microenvironments that serve as pathological fundamentals for rational design of bioresponsive carriers. Then we discuss different materials and delivery systems responsive to inflammation-associated biochemical signals, such as pH, reactive oxygen species, and specific enzymes. Also, applications of various bioresponsive drug delivery systems in the treatment of typical acute and chronic inflammatory diseases are described. Finally, crucial challenges in the future development and clinical translation of bioresponsive anti-inflammatory drug delivery systems are highlighted.

Self-assembly of fluorinated gradient copolymer in three-dimensional co-flow focusing microfluidic

HYPOTHESIS

The microfluidic technology can drive molecules to organize into aggregates with nano-structures, and gives a possibility to control aggregate morphologies by adjusting hydrodynamic parameters of microfluidics. COMSOL Multiphysics is a useful software to simulate the mixing situation of solutions in microfluidic. Here, experiments and simulation are combined to study the self-assembly of gradient copolymers in the microfluidic device.

EXPERIMENTS

Fluorinated gradient copolymers self-assembled in a three-dimensional co-flow focusing microfluidic device (3D CFMD). Hydrodynamic parameters of 3D CFMD were adjusted to control morphologies and the sizes of copolymer aggregates. A simulation software, COMSOL Multiphysics, was used to simulate the mixing and diffusion of outer phase stream and inner phase stream to explore the mixing kinetics of two streams in the microchannels.

FINDINGS

3D CFMD offered a novel platform for the continuous and controllable self-assembly of fluorinated gradient copolymer. Various morphologies of copolymer aggregates were obtained in 3D CFMD, but just spherical micelles were formed by a traditional solvent-inducing method. The flow velocity, initial water content of outer-phase stream, and the copolymer concentration of inner-phase stream had great effects on the morphology and size of copolymer aggregates. The simulation results made us a better understanding on the microfluidic self-assembly.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Acid-labile poly(ethylene glycol) shell of hydrazone-containing biodegradable polymeric micelles facilitating anticancer drug delivery

Biodegradable pH-sensitive amphiphilic block polymer (mPEG-Hyde-PLGA) was synthesized via ring-opening polymerization, initiated from a hydrazone-containing macro-initiator. In this way, a pH-sensitive hydrazone bond was inserted into the backbone of block copolymer, linking hydrophilic poly(ethylene glycol) segment and hydrophobic poly(lactic-co-glycolic acid) segment. The copolymer self-assembled to form stable micelles with mean diameters below 100 nm and served as a drug delivery system for doxorubicin, with drug loading content of 5.3%. pH sensitivity of the hydrazone-containing micelles was investigated by changes in diameter and size distribution observed by dynamic light scattering measurements when the micelles were encountered to acidic medium. Small pieces and larger aggregates were found by transmission electron microscopy resulting from the disassociation of the micelles in acidic conditions. It was also noted that doxorubicin release from the pH-sensitive micelles is significantly faster at pH 4.0 and pH 5.0 compared to pH 7.4, while almost no difference was detected in the case of pH non-sensitive micelles. MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assays on HepG-2 and MCF-7 cells revealed that doxorubicin-loaded pH-sensitive micelles had higher antitumor activity than pH-insensitive ones. This pH-sensitive drug delivery system based on hydrazone-containing block copolymer has been proved as a promising drug formulation for cancer therapy.

Hydrazone-Containing Triblock Copolymeric Micelles for pH-Controlled Drug Delivery

In this study, the structure-activity relationship of amphiphilic block copolymer micelles as nanosized drug delivery system was revealed. Firstly, a biodegradable triblock polymers PEG-DiHyd-PLA containing hydrazone bond was synthesized through the ring-opening polymerization. In this method, PEG-DiHyd-Phenol was used as the initiator and L-lactide as the monomer. Then, the polymeric micelles were formed and used as nano-drug carriers with pH sensitivity. The structure and composition of the polymer were characterized by infrared (IR), nuclear magnetic resonance (1H-NMR), and gel permeation chromatography (GPC), we characterized the self-assembling process of the triblock polymers and the pH sensitivity of the micelles by the means of transmission electron microscopy (TEM), dynamic light scattering method (DLS). Doxorubicin (DOX) acts as the model drug, and we researched the capacities of drug loading and release in vitro of the micelles. MTT experiments showed that the blank micelles of PEG-DiHyd-PLA were not cytotoxic to tumor cells (HepG-2, MCF-7) and normal cell (L-02 cells), but the DOX loaded ones displayed more toxicity than the ones without hydrazone, which was consistent to the further confocal laser scanning microscopy and flow cytometry study.

Multifunctional Poly(amine-co-ester-co-ortho ester) for Efficient and Safe Gene Delivery

Cationic polymers are used for non-viral gene delivery, but current materials lack the functionality to address the multiple barriers involved in gene delivery. Here we describe the rational design and synthesis of a new family of quaterpolymers with unprecedented multifunctionality: acid sensitivity, low cationic charge, high hydrophobicity, and biodegradability, all of which are essential for efficient and safe gene delivery. The polymers were synthesized via lipase-catalyzed polymerization of ortho ester diester, lactone, dialkyl diester, and amino diol monomers. Polymers containing ortho ester groups exhibited acid-sensitive degradation at endosomal pH (4~5), facilitated efficient endosomal escape and unpackaging of the genes, and were efficient in delivering genetic materials to HEK293 cells, human glioma cells, primary mouse melanoma cells, and human umbilical vein endothelial cells (HUVECs). We also developed a highly efficient lyophilized formulation of the nanoparticles, which could be stored for a month without loss of efficiency.

Low Molecular Weight PEI-Based Vectors via Acid-Labile Ortho Ester Linkage for Improved Gene Delivery

A series of novel pH-sensitive gene delivery vectors (POEI 1, 2, and 3) are synthesized through Michael addition from low molecular weight PEI (LMW PEI) via acid-labile ortho ester linkage with terminal acrylates (OEAc) by various feed molar ratios. The obtained POEI 1 and POEI 2 can efficiently condense plasmid DNA into nanoparticles with size range of 200-300 nm and zeta-potentials of about +15 mV while protecting DNA from enzymatic digestion compared with POEI 3. Significantly, ortho ester groups of POEI main-chains can make an instantaneous degradation-response to acidic endosomal pH (≈5.0), resulting in accelerated disruption of polyplexes and intracellular DNA release. MTT assay reveals that all POEIs exhibit much lower cytotoxicity in different cells than branched PEI (25 KDa). As expected, POEI 1 and POEI 2 perform improved gene transfection in vitro, suggesting that such polycations might be promising gene vectors based on overcoming toxicity-efficiency contradiction.

Stimuli-induced multiple dissociation and micellization transitions of random copolymers

Upon UV irradiation, random copolymer P(NBMA-co-MEO₂MA-co-OEGMA) was converted into P(MAA-co-MEO₂MA-co-OEGMA) with disruption of the initial micelles. Further increasing the temperature or decreasing the pH induced the reformation of micelles.

Self-assembly of random copolymers

Self-assembly of random copolymers has attracted considerable attention recently. In this feature article, we highlight the use of random copolymers to prepare nanostructures with different morphologies and to prepare nanomaterials that are responsive to single or multiple stimuli. The synthesis of single-chain nanoparticles from random copolymers and their potential applications are also discussed in some detail. We aim to draw more attention to these easily accessible copolymers, which are likely to play an important role in translational polymer research.

Dual Stimuli - Dual Response Nanoassemblies Prepared from a Simple Homopolymer

A dual stimuli responsive nanogel-polyelectrolyte complex based on electrostatic coating has been developed. The nanoassembly is designed to elicit two disparate responses (viz. surface property change and guest encapsulation stability) from two different stimuli (viz. pH and redox variations). The components of the nanogel and the polyelectrolyte have been conveniently achieved from a simple homopolymer, poly(pentafluorophenylacrylate).

Amphiphilic oligomer-based micelles as cisplatin nanocarriers for cancer therapy

Polymeric micelles (∼10 nm) have been prepared from the amphiphilic oligomer comprising oligomeric polystyrene as the hydrophobic inner core and half of EDTA (-N(CH₂COOH)₂) as the hydrophilic outermost shell. After chelating cisplatin with -N(CH₂COOH)₂ in water, polymeric micelles containing Pt on the spherical surface have been easily obtained. Since the chelate group is introduced into the amphiphilic oligomer as the terminal group by a RAFT agent, the chelation of cisplatin with PS(COOH)₂ is almost stoichiometric. The drug carrier based on PS(COOH)₂ showed a high loading efficiency (>70%) towards cisplatin. The release of the therapeutic Pt from the cisplatin-loaded composites (PS(COOH)₂-Pt) triggered under weak acidic conditions resulted in good Pt-release and accumulation in tumor cells. Both in vitro and in vivo, the chelated cisplatin inhibited Sk-Br3 cancer more effectively than the intact cisplatin does. Furthermore, neither PS(COOH)₂ nor PS(COOH)₂-Pt showed obvious systematic toxicity.

Mesoscopic simulations on the aggregation behavior of pH-responsive polymeric micelles for drug delivery

Computer simulations, dissipative particle dynamics (DPD) and mesoscopic dynamics (MesoDyn), are performed to study the aggregation behavior of pH-sensitive micelles self-assembled from amphiphilic polymer poly(methyl methacrylate-co-methacrylic acid)-b-poly(poly-(ethylene glycol) methyl ether monomethacrylate), P(MMA-co-MAA)-b-PPEGMA. Ibuprofen (IBU) is selected as the model drug. It can be seen from DPD simulations that P(MMA-co-MAA)-b-PPEGMA and IBU form spherical core-shell micelles at certain compositions, and IBU molecules distribute inside the core formed by hydrophobic MMA. The polymer molecules aggregate first, and then IBU diffuses into the aggregate, forming drug-loaded nanoparticles. With different compositions of polymer and IBU, aggregate morphologies in water are observed as sphere, column and lamella. From MesoDyn results, with less hydrophobic MMA beads, the polymer chains are more difficult to form ordered aggregates, and the order parameters get equilibrated in a longer time. The pH value also affects the aggregate process. At pH<5, the polymer could form traditional core-shell micelles. But at pH>5, the morphology of micelles is found to be anomalous and loose for releasing drug. MAA aggregates on the surface, instead of the inside. The simulation results are qualitatively consistent with the experimental results.

Synthesis and characterization of new poly(ortho ester amidine) copolymers for nonviral gene delivery

A new type of pH-labile cationic polymers, poly(ortho ester amidine) (POEAmd) copolymers, has been synthesized and characterized with potential future application as gene delivery carriers. The acid-labile POEAmd copolymer was synthesized by polycondensation of a new ortho ester diamine monomer with dimethylaliphatimidates, and a non-acid-labile polyamidine (PAmd) copolymer was also synthesized for comparison using a triethylene glycol diamine monomer. Both copolymers were easily dissolved in water, and can efficiently bind and condense plasmid DNA at neutral pH, forming nano-scale polyplexes. The physico-chemical properties of the polyplexes have been studied using dynamic light scattering, gel electrophoresis, ethidium bromide exclusion, and heparin competition. The average size of the polyplexes was dependent on the amidine: phosphate (N:P) ratio of the polymers to DNA. Polyplexes containing the acid-labile POEAmd or the non-acid-labile PAmd showed similar average particle size, comparable strength of condensing DNA, and resistance to electrostatic destabilization. They also share similar metabolic toxicity to cells as measured by MTT assay. Importantly, the acid-labile polyplexes undergo accelerated polymer degradation at mildly-acid-pHs, resulting in increasing particle size and the release of intact DNA plasmid. Polyplexes from both types of polyamidines caused distinct changes in the scattering properties of Baby Hamster Kidney (BHK-21) cells, showing swelling and increasing intracellular granularity. These cellular responses are uniquely different from other cationic polymers such as polyethylenimine and point to stress-related mechanisms specific to the polyamidines. Gene transfection of BHK-21 cells was evaluated by flow cytometry. The positive yet modest transfection efficiency by the polyamidines (acid-labile and non-acid-labile alike) underscores the importance of balancing polymer degradation and DNA release with endosomal escape. Insights gained from studying such acid-labile polyamidine-based DNA carriers and their interaction with cells may contribute to improved design of practically useful gene delivery systems.