Network structure and compositional effects on tensile mechanical properties of hydrophobic association hydrogels with high mechanical strength

Rational Design of a Multifunctional Hydrogel Trap for Water and Fertilizer Capture: A Review

Water scarcity and land infertility pose significant challenges to agricultural development, particularly in arid and semiarid regions. Improving soil-water-retention capacity and fertilizer utilization efficiency through the application of soil additives has become a pivotal approach in agricultural practices. Hydrogels exhibit exceptional water absorption and fertilizer retention capabilities, making them extensively utilized in the fields of agriculture, forestry, and desert control. Currently, most reviews primarily focus on the raw materials, classification, synthesis methods, and application prospects of hydrogels, with limited attention given to strategies for enhancing water-retention performance, mechanisms underlying fertilizer absorption, and environmental risks. This review covers the commonly used cross-linking methods in hydrogel synthesis and the structure-activity relationship between hydrogels and water as well as fertilizer. Additionally, a thorough analysis of the ecological benefits and risks associated with hydrogels is presented. Finally, future prospects and challenges are delineated from the perspectives of material design and engineering applications.

Hydrogels with high sacrifice efficiency of sacrificial bonds and with high strength and toughness due to dense entanglements of polymer chains

Introducing sacrificial bonds is a common method for increasing the toughness of hydrogels. Many sacrificial bonds have been extensively investigated, but the sacrifice efficiency has never been studied. In this study, polyacrylamide hydrogels with highly entangled polymer chains containing carboxyl-zirconium (-COO--Zr4+) sacrificial bonds are prepared to study the effect of polymer chain entanglement on the sacrificial bond efficiency. Unlike chemical crosslinking points, the dense physical entanglements do not affect the toughness (∼43 MJ/m3) of hydrogels but significantly improve the tensile strength (by two times) and Young's modulus (by six times). Physical entanglements enable the chains to slide and adjust the network structure under stress, which enables more polymer chains and sacrificial bonds to participate in the deformation process. Therefore, dense entanglements will greatly improve the sacrifice efficiency. However, a high density of chemical crosslinking points will limit the improvement in the sacrifice efficiency, which is attributed to the sliding limitations because of physical entanglement. The highly entangled polyacrylamide hydrogels toughened by -COO--Zr4+ have an excellent load-bearing capacity. This study provides a novel strategy for designing hydrogels with ultra-high strength and toughness, which paves the way for the development of many hydrogels used in engineering materials.

Natural Polymer-Based Hydrogel Dressings for Wound Healing

Significance: Acute wounds such as severe burns and chronic wounds like diabetic ulcers present a significant threat to human health. Wound dressings made from natural polymers offer inherent properties that effectively enhance wound healing outcomes and reduce healing time. Recent Advances: Numerous innovative hydrogels are being developed and translated to the clinic to successfully treat various wound types. This underscores the substantial potential of hydrogels in the future wound care market. Economically, annual sales of wound care products are projected to reach $15-22 billion by 2024. Critical Issues: While chitosan-, cellulose-, and collagen-based hydrogel dressings are currently commercially available, scaling-up and manufacturing hydrogels for commercial products remain a challenging process. In addition, ensuring the sterility and stability of the chemical or biological components comprising the hydrogel is a critical consideration. Future Directions: In light of the persistent increase in wound fatalities and the resulting economic and social impacts, as well as the importance of educating the public about dietary health and disease, there should be increased investment in new wound care dressings, particularly hydrogels derived from natural products. With numerous researchers dedicated to advancing preclinical hydrogels, the future holds promise for more innovative and more personalized hydrogel wound dressings.

Effects of concentration of hydrophobic component and swelling in saline solutions on mechanical properties of a stretchable hydrogel

An elastic biopolymer, resilin possesses exceptional qualities such as high stretchability and resilience. Such attributes are utilized in nature by many species for mechanical energy storage to facilitate movement. The properties of resilin are attributed to the balanced combination of hydrophilic and hydrophobic segments. To mimic the properties of resilin, we developed a hydrogel system composed of hydrophilic acrylic acid (AAc) and methacrylamide (MAM) chains and hydrophobic poly(propylene glycol diacrylate) (PPGDA) chains. The gel was produced through free-radical polymerization in 0.8 M NaCl solutions using KPS as an initiator. In these gels, AAc and MAM can form hydrogen bonds, whereas the association between PPGDA chains can lead to hydrophobic domains. The PPGDA concentration affects the level of hydrogen bonding and gel mechanical properties. Tensile experiments revealed that the elastic modulus increased with a higher PPGDA concentration. Retraction experiments demonstrated increased velocity and acceleration when released from a stretched state with increasing PPGDA concentration. Swelling and deswelling of gels in saline solutions led to a change in mechanical properties and retraction behavior. This study shows that the stretchability and resilience of these hydrogels can be adjusted by changing the concentration of hydrophobic components.

Recent advances in composite hydrogels: synthesis, classification, and application in the treatment of bone defects

Bone defects are often difficult to treat due to their complexity and specificity, and therefore pose a serious threat to human life and health. Currently, the clinical treatment of bone defects is mainly surgical. However, this treatment is often more harmful to patients and there is a potential risk of rejection and infection. Hydrogels have a unique three-dimensional structure that can accommodate a variety of materials, including particles, polymers and small molecules, making them ideal for treating bone defects. Therefore, emerging composite hydrogels are considered one of the most promising candidates for the treatment of bone defects. This review describes the use of different types of composite hydrogel in the treatment of bone defects. We present the basic concepts of hydrogels, different preparation techniques (including chemical and physical crosslinking), and the clinical requirements for hydrogels used to treat bone defects. In addition, a review of numerous promising designs of different types of hydrogel doped with different materials (e.g., nanoparticles, polymers, carbon materials, drugs, and active factors) is also highlighted. Finally, the current challenges and prospects of composite hydrogels for the treatment of bone defects are presented. This review will stimulate research efforts in this field and promote the application of new methods and innovative ideas in the clinical field of composite hydrogels.

Plant-based Biomass/Polyvinyl Alcohol Gels for Flexible Sensors

Flexible sensors show great application potential in wearable electronics, human-computer interaction, medical health, bionic electronic skin and other fields. Compared with rigid sensors, hydrogel-based devices are more flexible and biocompatible and can easily fit the skin or be implanted into the body, making them more advantageous in the field of flexible electronics. In all designs, polyvinyl alcohol (PVA) series hydrogels exhibit high mechanical strength, excellent sensitivity and fatigue resistance, which make them promising candidates for flexible electronic sensing devices. This paper has reviewed the latest progress of PVA/plant-based biomass hydrogels in the construction of flexible sensor applications. We first briefly introduced representative plant biomass materials, including sodium alginate, phytic acid, starch, cellulose and lignin, and summarized their unique physical and chemical properties. After that, the design principles and performance indicators of hydrogel sensors are highlighted, and representative examples of PVA/plant-based biomass hydrogel applications in wearable electronics are illustrated. Finally, the future research is briefly prospected. We hope it can promote the research of novel green flexible sensors based on PVA/biomass hydrogel.

Self-Healing Hydrogels: Development, Biomedical Applications, and Challenges

Polymeric hydrogels have drawn considerable attention as a biomedical material for their unique mechanical and chemical properties, which are very similar to natural tissues. Among the conventional hydrogel materials, self-healing hydrogels (SHH) are showing their promise in biomedical applications in tissue engineering, wound healing, and drug delivery. Additionally, their responses can be controlled via external stimuli (e.g., pH, temperature, pressure, or radiation). Identifying a suitable combination of viscous and elastic materials, lipophilicity and biocompatibility are crucial challenges in the development of SHH. Furthermore, the trade-off relation between the healing performance and the mechanical toughness also limits their real-time applications. Additionally, short-term and long-term effects of many SHH in the in vivo model are yet to be reported. This review will discuss the mechanism of various SHH, their recent advancements, and their challenges in tissue engineering, wound healing, and drug delivery.

Chitosan-based double cross-linked ionic hydrogels as a strain and pressure sensor with broad strain-range and high sensitivity

A conductive hydrogel P(AAm-co-AA)/CS-Fe³⁺ with double cross-linked networks was fabricated using a one-step polymerization by UV irradiation and a soaking process in Fe(NO₃)₃ solution. In this hydrogel, the rigid chain of chitosan (CS) and the soft chain of copolymer P(AAm-co-AA) with acrylic acid (AA) and acrylamide (AAm) act as the backbone, among which large amounts of hydrogen bonds are formed by the amino, hydroxyl, and carboxyl groups on the two polymers. Ferric irons (Fe³⁺) are introduced and form coordination interactions with carboxyl and amino groups of the polymers. The double cross-linked interactions in the system can enhance the tensile strength and toughness of the hydrogel. Thus, the prepared P(AAm-co-AA)/CS-Fe³⁺ hybrid network hydrogel shows excellent mechanical properties in many aspects: a strength of up to 550 kPa, a broad strain-range up to 800%, fast self-recovery ability (30 min), and low hysteresis strain (<100%). The conductive hydrogel demonstrates high strain sensitivity (gauge factor (GF) = 6.6 at a strain of 700%) as a flexible sensor. Human movements (for example, finger bending, vocal cord vibration, and other human activities) can be sensitively detected using the P(AAm-co-AA)/CS-Fe³⁺ hydrogel sensor.

A Review on Microfluidic Platforms Applied to Nerve Regeneration

In recent decades, microfluidics have significantly advanced nerve regeneration research. Microfluidic devices can provide an accurate simulation of in vivo microenvironment for different research purposes such as analyzing myelin growth inhibitory factors, screening drugs, assessing nerve growth factors, and exploring mechanisms of neural injury and regeneration. The microfluidic platform offers technical supports for nerve regeneration that enable precise spatio-temporal control of cells, such as neuron isolation, single-cell manipulation, neural patterning, and axon guidance. In this paper, we review the development and recent advances of microfluidic platforms for nerve regeneration research.

Mussel-inspired ultra-stretchable, universally sticky, and highly conductive nanocomposite hydrogels

Developing ultra-stretchable, universally sticky, and highly conductive nanocomposite hydrogels without doping agents and nanoparticle-aggregation is still a challenge. Herein, doping-free and nanoparticle-aggregation-inhibited hydrogels composed of Fe3+, dopamine (DA), pyrrole (Py) and polyacrylic acid (PAA) were prepared. Polypyrrole-polydopamine (PPy-PDA)/PAA hydrogels were quickly formed due to the abundant ionic bonds and physical cross-linking under the addition of Fe3+. Moreover, the H+ ions of the carboxylic acid groups on the PAA polymer chain helped to improve the conductivity of the hydrogels. Surprisingly, the multi-functional hydrogels received a high stretchability of 1900%, a tissue-like elastic modulus of 22 kPa, an adhesive strength of 2125.9 J m-2, and a high conductivity of 0.39 S m-1. Besides, the PPy-PDA/PAA hydrogels showed good antioxidant activity, biocompatibility and tissue repairing behavior. In short, the prepared multi-functional hydrogels have potential to address the human clinical problem of tissue repair and regeneration.

A highly sensitive strain sensor based on a silica@polyaniline core-shell particle reinforced hydrogel with excellent flexibility, stretchability, toughness and conductivity

Hydrogel-based flexible strain sensors for personal health monitoring and human-machine interaction have attracted wide interest among researchers. In this paper, hydrophobic association and nanocomposite conductive hydrogels were successfully prepared by introducing polyaniline coated silica (SiO2@PANI) core-shell particles into an acrylamide-lauryl methacrylate (P(AM/LMA)) copolymer matrix. The hydrophobic interaction between the SiO2@PANI core-shell particles and the hydrophobic LMA in the P(AM/LMA) chains induced the hydrogels with outstanding mechanical properties. Furthermore, the polyaniline on the SiO2 surface and the inorganic salt formed a conductive network, which synergistically enhanced the conductivity of the hydrogels. The obtained hydrogels integrate high tensile strength (1398 kPa), ultra-stretchability (>1000%), wonderful strain sensitivity (gauge factor = 10.407 at 100-1100% strain), quick response (300 ms), and excellent durability (>300 cycles) due to the hydrophobic association and nanocomposite effect. The prepared SiO2@PANI-P(AM/LMA) hydrogel shows high stress sensitivity to detect human movements and displays a broad application prospect in flexible strain-sensor field.

Progress on Preparation of pH/Temperature-Sensitive Intelligent Hydrogels and Applications in Target Transport and Controlled Release of Drugs

Hydrogels with three-dimensional network structure, hydrophilic, and insoluble in water which are ideal carrier materials for intelligent drug delivery systems. Intelligent hydrogel has become a research frontier and hotspot because of its intelligence, high efficiency, safety, and convenience in drug controlled and prolonged release. It has a broad application prospect in the medicine and biomedicine fields and can lead the medicine fields into a new era of “precise treatment.” Based on the latest research progress, the main preparation methods of hydrogel and the development of the drug delivery system are briefly introduced. The most promising three intelligent hydrogels in the human physiological environment, namely, pH responsiveness, temperature responsiveness, and pH/temperature dual responsiveness, are emphatically reviewed. Their release mechanisms, targeting transport, and controlled-prolonged release of drug are also discussed. In addition, some suggestions for the main problems and future development were given.

Preparation of a hydrophobically associated cationic polyacrylamide and its regulation of the sludge dewatering performance

A hydrophobically associating cationic polyacrylamide (HACPAM) was prepared by using a micellar polymerization method with V-50 (azobisisobutyramidine hydrochloride) as the initiator and acrylamide, acryloyloxyethyl trimethylammonium chloride and butyl methacrylate as substrates under ultraviolet light irradiation. Structural analysis using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and X-ray photoelectron spectroscopy analyses showed that the substrates were successfully polymerized. HACPAM was used to condition sludge to improve its dewatering performance, and the results showed that as the amount of HACPAM increases, the sludge dewatering performance is significantly improved, and 3.532 kg/t dry solids of HACPAM is regarded as the optimal amount. Compared with the commercially available cationic polyacrylamide (CPAM), HACPAM has a stronger hydrophobic group association effect, with better promotion of the conversion of bound water in sludge flocs into free water, thereby improving the sewage dewatering performance. The 3D spatial structure of dewatered sludge cakes analyzed by computed tomography technology showed that the number of pores of the dewatered sludge cake treated by HACPAM 3 was smaller than that of the cake treated by CPAM, with a reduction in the porosity of 68.8%, resulting in a better hydrophobic effect. In addition, the mechanism of HACPAM improving the dewatering performance is discussed.

Caudicles in vandoid orchids: A carotenoid-based soft material with unique properties

130 years ago, Darwin observed that caudicles in vandoid orchids possess considerable elasticity and further hypothesized that their elasticity serves to improve pollination efficiency. However, there has been no study that seeks to either quantitatively backup Darwin's hypothesis or characterize this natural material for practical use. Here we show that vandoid caudicles are a novel kind of soft material with extremely high extensibility (1190%), low modulus (160 kPa) and density lower than that of water. Vandoid caudicles contain carotenoids that attach to basal polymers through noncovalent interactions. Inspired by the chemical structure of caudicles, we synthesize calcium-alginate/polyacrylamide hydrogels supplemented with carotenoids and demonstrate that their strength as well as stretchability are enhanced two-fold. Our findings identify a new carotenoid-based material system with unique properties that approach the current boundaries of the Ashby chart, demonstrating potential application of carotenoids as biocompatible reinforcing agent for hydrogels. STATEMENT OF SIGNIFICANCE: We have investigated the microstructure, mechanical properties and chemical components of vandoid caudicles as an elastic plant tissue and demonstrated a bio-inspired design that can enhance the elasticity of hydrogels. Existing research on vandoid caudicles are very few and mainly focus on their phylogenetics and developmental process, and the potential application of caudicles in the field of material sciences remains unexplored. Our results showed that caudicles are more stretchable than most natural and synthetic elastomers and have a modulus similar to hydrogels. Carotenoids, an important chemical component of caudicles, can be used as supplements to hydrogels to improve their strength and stretchability.

The advances of organic chromium based polymer gels and their application in improved oil recovery

In recent years, with the further development of old oilfields, in order to further improve the oil recovery, they must be conformance controlled. Among various types of conformance control methods, polymer gels composed of polymers and crosslinkers have attracted widespread attention because of their efficiency and low costs. Among them, organic chromium gels with their good formation adaptability and high stability have been fully developed in recent decades. This review introduces the different types of polymers and crosslinkers used in the preparation of organic chromium gels, and the mechanisms of affecting their performance are analyzed. On this basis, the organic chromium gels for different formation conditions are introduced, including nanoparticle-reinforced and compound organic chromium gels. At the same time, evaluation methods of organic chromium gels are introduced, while the focus is on the in-situ measurement method (mirco-rheology) of gel formation time developed in recent decades. Based on the currently developed organic chromium gel and the analysis of the development status in oilfields, future directions like the use of supramolecular organic chromium gel and shear organic chromium gel are suggested.

Synthesis and Performance of a Novel High-Efficiency Coal Dust Suppressant Based on Self-Healing Gel

During transportation and storage, coal produces a lot of dust, which pollutes the environment and threatens the occupational health of workers. Although many dust suppressants have been developed for dust prevention at work, the implementation of current dust suppressants does not meet the requirements due to various factors such as the hydrophobic nature of coal dust and a harsh external environment. In this study, hydroxyethyl cellulose, acrylamide, and stearyl methyl acrylate were used for micelle polymerization to prepare an environmental protection dust suppressant for preventing dust during coal storage and transportation. The microstructure of the reactants and the products was analyzed by Fourier transform infrared as well as scanning electron microscopy. The strength and self-healing tensile properties of binder coal were taken as indicators to determine the best synthesis dosage and conditions. The dust suppressant particles are applied to the dust accumulation area, contact each other after water absorption, and swell to complete the healing, to achieve the purpose of dust control. The evaluation of the relevant properties of the dust suppressant reveals that the dust suppressant has a good covering effect, an excellent dust suppressant performance, and a significant dust suppression action.

Unraveling the gallol-driven assembly mechanism of thermoreversible supramolecular hydrogels inspired by ascidians

Gallic acid, a small polyphenolic compound with strong hydrogen-bonding ability, is studied as a dynamic crosslinker of poly(vinyl alcohol) for preparing thermosensitive hydrogels. Furthermore, insights about the involved mechanism are shown.

On the Race for More Stretchable and Tough Hydrogels

Hydrogels are tridimensional networks that are able to retain important amounts of water. These soft materials can be obtained through self-assembling processes involving either hydrophilic molecules or polymers, allowing the formation of the corresponding covalently and physically cross-linked networks. Although the applicability of hydrogels in biomedicine has been exponentially growing due to their biocompatibility and different responses to stimuli, these materials have exhibited the particular feature of poor mechanical strength, and consequently, are brittle materials with low deformation. Due to this reason, a race has started to obtain more stretchable and tough hydrogels through different approaches. Within this context, this review article describes the most representative strategies and examples involving synthetic polymers with potential for biomedical applications.

Effects of amphiphilic monomers and their hydrophilic spacers on polyacrylamide hydrogels

Hydrogels based on physical interactions have been extensively studied due to their special network structure and excellent mechanical properties. In this paper, a series of hydrogels based on hydrophobic interactions were prepared via the free-radical copolymerization of acrylamide and polymerizable amphiphilic monomers dodecanol polyoxyethylene (n) acrylates (AEO-n-AC, n = 3, 7, 9, 15, 23) by a simple and facile method. The prepared single-network hydrogels cross-linked by the self-assemble AEO-n-AC micelles acting as cross-linkers exhibited great tensile strength of 0.45 MPa and excellent compression strength of 4.5 MPa. Transmission electron microscopy tests reflected that the morphologies of the self-associated micelles were determined by the hydrophilic segment of the amphiphilic monomers, which further affected the mechanical properties of the hydrogel. Amphiphilic monomer with appropriate length of hydrophilic spacers could significantly enhance the tensile strength of the hydrogel. Meanwhile, amphiphilic monomers with long hydrophilic segment were advantageous for the compression properties of the hydrogel. Furthermore, the hydrogels exhibited excellent micro self-repair ability during the cycling tensile and loading-unloading test even at the strain and compression were 400%, 0.95, respectively. This discover of hydrophilic spacer effect is of great significance for the design of physical interaction-based hydrogels with high strength and compression properties.

High-Strength Nanocomposite Hydrogels with Swelling-Resistant and Anti-Dehydration Properties

Hydrogels with excellent mechanical properties have potential for use in various fields. However, the swelling of hydrogels under water and the dehydration of hydrogels in air severely limits the practical applications of high-strength hydrogels due to the influence of air and water on the mechanical performance of hydrogels. In this study, we report on a kind of tough and strong nanocomposite hydrogels (NC-G gels) with both swelling-resistant and anti-dehydration properties via in situ free radical copolymerization of acrylic acid (AA) and N-vinyl-2-pyrrolidone (VP) in the water-glycerol bi-solvent solutions containing small amounts of alumina nanoparticles (Al₂O₃ NPs) as the inorganic cross-linking agents. The topotactic chelation reactions between Al₂O₃ NPs and polymer matrix are thought to contribute to the cross-linking structure, outstanding mechanical performance, and swelling-resistant property of NC-G gels, whereas the strong hydrogen bonds between water and glycerol endow them with anti-dehydration capacity. As a result, the NC-G gels could maintain mechanical properties comparable to other as-prepared high-strength hydrogels when utilized both under water and in air environments. Thus, this novel type of hydrogel would considerably enlarge the application range of hydrogel materials.

Preparation and Characterization of Hydrophobic-Associated Microspheres for Deep Profile Control in Offshore Oilfields

Microspheres have excellent sealing performances such as injectivity, bridging-off, deep migration, and deformation performances, but their plugging effects are limited by the fast swelling rate and poor viscoelasticity. In this study, we synthesized a novel modified microsphere with polymerizable surfactant monomers and cationic monomers. We investigated the influence factors on the swelling performance and rheological properties of the microspheres and explored the ways to improve the plugging performance of hydrophobic-associating microspheres. The association behaviors in aqueous media of poly(acrylamide-co-methacry loyloxyethyl trimethyl ammonium chloride-co-n-dodecyl poly(etheroxy acrylate) P(AM-DMC-DEA) are proven to be mediated by the DEA content. Moreover, the hydrophobic association interaction has a strong effect on the performance of microspheres such as swelling properties, the rheological performance, and plugging properties. The swelling properties of microsphere studies exhibited the slow swelling rate. The rheological performance measurements showed significant improvements; yield stress, and creep compliance increased rapidly from 404 to 2060 Pa and 3.89 × 10−4 to 1.41 × 10−2 1/Pa, respectively, with DEA content in microspheres rising from 0.0% to 0.22%. The plugging properties of microspheres were enhanced by the slow swelling performance and good viscoelasticity.