NMR and FT Raman characterisation of regioselectively sulfated chitosan regarding the distribution of sulfate groups and the degree of substitution

Chemically modified galactans of Grateloupia indica: From production to in vitro antiviral activity

Herpes simplex viruses (HSVs) have an affinity for heparan sulfate proteoglycans on cell surfaces, which is a determinant for virus entry. Herein, several sulfated galactans that mimic the active domain of the entry receptor were employed to prevent HSV infection. They were produced from Grateloupia indica using chlorosulfonic acid-pyridine (ClSO3H.Py)/N,N-dimethylformamide reagent (fraction G-402), SO3.Py/DMF reagent (G-403), or by aqueous extraction (G-401). These galactans contained varied molecular masses (33-55 kDa), and sulfate contents (12-20 %), and have different antiviral activities. Especially, the galactan (G-402) generated by using ClSO3H.Py/DMF, a novel reagent, exhibited the highest level of antiviral activity (EC50 = 0.36 μg/mL) compared to G-403 (EC50 = 15.6 μg/mL) and G-401 (EC50 = 17.9 μg/mL). This most active sulfated galactan possessed a linear chain containing β-(1 → 3)- and α-(1 → 4)-linked Galp units with sulfate group at the O-2/4/6 and O-2/3/6 positions, respectively. The HSV-1 and HSV-2 strains were specifically inhibited by this novel 33 ± 15 kDa galactan, which also blocked the virus from entering the host cell. These results highlight the significant potential of this sulfated galactan for antiviral research and drug development. Additionally, the reagent used for the effective conversion of galactan hydroxy groups to sulfate during extraction may also be useful for the chemical transformation of other natural products.

Agar and Chitosan Hydrogels' Design for Metal-Uptaking Treatments

In the field of cultural heritage, the use of natural gels is rising for the application of active agents. Here, two natural polymers are assessed: agar, a pioneer hydrogel for conservation treatments, and chitosan, a rather novel and metal-binding gel. For chitosan, a state-of-the-art based formulation (CS-ItA-LCys) is evaluated as it was reported for silver-complexing properties. It is evaluated whether these polymers can withstand the addition of the chelating compound deferoxamine, which is a bacterial siderophore. This allows for the obtainment of completely bio-sourced gel systems. A Fourier-transformed (FT) infrared spectroscopy characterization is performed, completed with rheological measurements and Cryo-Scanning Electron Microscopy (cryo-SEM) to investigate the physico-chemical properties of the gels, as well as their interaction with deferoxamine. Both polymers are also tested for their inherent complexing ability on silver ions using FT-Raman spectroscopy. A multi-analytical comparison shows different microstructures, in particular, the presence of a thick membrane for chitosan and different mechanical behaviors, with agar being more brittle. Neither hydrogel seems affected by the addition of deferoxamine; this is shown by similar rheological behavior and molecular structures in the presence or absence of the chelator. The intrinsic abilities of the chitosan formulation to make silver complex are demonstrated with the observation of two peaks characteristic of Ag-S and Ag-O bonds. Agar and chitosan are both proven to be reliable gels to act as carriers for bio-based active agents. This paper confirms the potential asset of the chitosan formulation CS-ItA-LCys as a promising gel for the complexation of soluble silver.

Fabrication of affinity-based drug delivery systems based on electrospun chitosan sulfate/poly(vinyl alcohol) nanofibrous mats

Benign electrospinning of chitosan in aqueous medium is an open challenge mainly due to its insolubility in neutral pH and inter- and intramolecular hydrogen bonding interactions. Here, we developed a simple and widely-used methodology to improve the chitosan electrospinnability through the sulfation of chitosan and its further mixing with poly(vinyl alcohol) for the first time. The FTIR, 1H NMR and elemental analyses showed the successful sulfation of chitosan. Furthermore, the viscosity and electrical conductivity measurements revealed the high solubility of chitosan sulfate (CS) in aqueous media. In the next step, a uniform electrospun nanofibrous mat of CS/PVA was fabricated with a fiber diameter ranging from 90 to 340 nm. The crosslinked CS/PVA (50/50) nanofibrous mat as the optimum sample showed a swelling ratio of 290 ± 4 % and a high Young's modulus of 3.75 ± 0.10 GPa. Finally, malachite green (MG) as a cationic drug model was loaded into different samples of chitosan film, CS film, and CS/PVA (50/50) nanofibrous mat and its release behavior was studied. The results of these analyses revealed that the CS/PVA (50/50) nanofibrous mat can successfully load higher contents of the MG and also release it in a sustained manner.

Advances in Antiviral Delivery Systems and Chitosan-Based Polymeric and Nanoparticulate Antivirals and Antiviral Carriers

Current antiviral therapy research is focused on developing dosage forms that enable highly effective drug delivery, providing a selective effect in the organism, lower risk of adverse effects, a lower dose of active pharmaceutical ingredients, and minimal toxicity. In this article, antiviral drugs and the mechanisms of their action are summarized at the beginning as a prerequisite background to develop relevant drug delivery/carrier systems for them, classified and briefly discussed subsequently. Many of the recent studies aim at different types of synthetic, semisynthetic, and natural polymers serving as a favorable matrix for the antiviral drug carrier. Besides a wider view of different antiviral delivery systems, this review focuses on advances in antiviral drug delivery systems based on chitosan (CS) and derivatized CS carriers. CS and its derivatives are evaluated concerning methods of their preparation, their basic characteristics and properties, approaches to the incorporation of an antiviral drug in the CS polymer as well as CS nanoparticulate systems, and their recent biomedical applications in the context of actual antiviral therapy. The degree of development (i.e., research study, in vitro/ex vivo/in vivo preclinical testing), as well as benefits and limitations of CS polymer and CS nanoparticulate drug delivery systems, are reported for particular viral diseases and corresponding antivirotics.

Regioselective sulfated chitosan produces a biocompatible and antibacterial wound dressing with low inflammatory response

The aim of current study is to tailor chitosan derivate which is water-soluble while presents original biological features of chitosan. For this purpose, the 6-O chitosan sulfate (CS) with naked amine groups was synthesized via regioselective modification of chitosan (C) during which both crosslinking capacity and antibacterial properties of the C were remained intact. This was achieved by sulfation the C under controlled acidic conditions using chlorosulfonic acid/sulfuric acid mixture. Subsequently, a chemically crosslinked hydrogel of the CS was used as a wound dressing substrate. The modified sulfate groups retained the biocompatibility of C and showed antibacterial effects against gram-positive and gram-negative bacteria. In addition, the presence of sulfate groups in the CS chemical structure improved its anticoagulant activity compared to the unmodified C. Both in vitro and in vivo enzyme-linked immunosorbent assay (ELISA) measurements showed that CS had a higher potential to bind and scavenger anti-inflammatory cytokines, including IL-6 and transforming growth factor-β (TGF-β), both of which play critical roles in the early stage of the wound healing process. After treatment of full-thickness wounds with CS hydrogels, the macrophage cells (c.a. 6 × 10⁴ cells) expressed significantly more M2 phenotype markers compared to the C group (4.2 × 10⁴ cells). Furthermore, the CS hydrogel induced better re-epithelialization and vascularization of full-thickness wounds in mice compared to the C hydrogel during 30 days.

Impact of Degree of Ionization and PEGylation on the Stability of Nanoparticles of Chitosan Derivatives at Physiological Conditions

Nowadays, the therapeutic efficiency of small interfering RNAs (siRNA) is still limited by the efficiency of gene therapy vectors capable of carrying them inside the target cells. In this study, siRNA nanocarriers based on low molecular weight chitosan grafted with increasing proportions (5 to 55%) of diisopropylethylamine (DIPEA) groups were developed, which allowed precise control of the degree of ionization of the polycations at pH 7.4. This approach made obtaining siRNA nanocarriers with small sizes (100–200 nm), positive surface charge and enhanced colloidal stability (up to 24 h) at physiological conditions of pH (7.4) and ionic strength (150 mmol L⁻¹) possible. Moreover, the PEGylation improved the stability of the nanoparticles, which maintained their colloidal stability and nanometric sizes even in an albumin-containing medium. The chitosan-derivatives displayed non-cytotoxic effects in both fibroblasts (NIH/3T3) and macrophages (RAW 264.7) at high N/P ratios and polymer concentrations (up to 0.5 g L⁻¹). Confocal microscopy showed a successful uptake of nanocarriers by RAW 264.7 macrophages and a promising ability to silence green fluorescent protein (GFP) in HeLa cells. These results were confirmed by a high level of tumor necrosis factor-α (TNFα) knockdown (higher than 60%) in LPS-stimulated macrophages treated with the siRNA-loaded nanoparticles even in the FBS-containing medium, findings that reveal a good correlation between the degree of ionization of the polycations and the physicochemical properties of nanocarriers. Overall, this study provides an approach to enhance siRNA condensation by chitosan-based carriers and highlights the potential of these nanocarriers for in vivo studies.

Low molecular weight sulfated chitosan isolation, characterization and anti-tuberculosis activity derived from Sepioteuthis lessoniana

The research focused on tuberculosis as it is one of the world's most serious health problems. The extracted chitin from the gladius of Sepioteuthis lessoniana converted into Chitosan (CH). The purified and freeze-dried CH was refined as Sulfated Chitosan (SCH). The SCH was converted into low molecular weight of SCH with various doses of Gamma Irradiation (GIR). Fluorescence characteristics of GIR-SCH and elemental analysis were confirmed. The structure and molecular weights of GIR-SCH were determined with FT-IR, NMR and MALDI-TOF/Mass Spectroscopy. 100 Gy of GIR-SCH significantly showed the minimum inhibitory concentration (MIC) against Mycobacterium smegmatis. The MIC against M. smegmatis was not affected by the varied sulfate levels in the identical molecular weight GIR-SCH. However, the lowest molecular weight GIR-SCH displayed a significantly MIC against M. smegmatis. In docking analysis, the 6ZT3 ligand had the lowest binding energy of -1.57 kcal/Mol indicating a superior binding interaction with GIR-SCH. The effect of molecular weight reduction by GIR on the anti-tuberculosis capacity of GIR SCH was investigated in this study which had antimicrobial implications.

Heparanized chitosans: towards the third generation of chitinous biomaterials

The functionalization of chitosans is an emerging research area in the design of solutions for a wide range of biomedical applications. In particular, the modification of chitosans to incorporate sulfate groups has generated great interest since they show structural similarity to heparin and heparan sulfates. Most of the biomedical applications of heparan sulfates are derived from their ability to bind different growth factors and other proteins, as through these interactions they can modulate the cellular response. This review aims to summarize the most recent advances in the synthesis, and structural and physicochemical characterization of heparanized chitosan, a remarkably interesting family of polysaccharides that have demonstrated the ability to mimic heparan sulfates as ligands for different proteins, thereby exerting their biological activity by mimicking the function of these glycosaminoglycans.

Evaluation of antibacterial, teratogenicity and antibiofilm effect of sulfated chitosans extracted from marine waste against microorganism

Biofilms play a key role in infectious diseases, as they may form on the surface and persist after treatment with various antimicrobial agents. The Staphylococcus aureus, Klebsiella pneumoniae, S. typhimurium, P. aeruginosa, and Escherichia coli most frequently associated with medical devices. Chitosan sulphate from marine litter (SCH-MW) was extracted and the mineral components were determined using atomic absorption spectroscopy (AAS). The degree of deacetylation (DA) of SCH was predicted 50% and 33.3% in crab and shrimp waste respectively. The elucidation of the structure of the SCH-MW was portrayed using FT-IR and 1H-NMR spectroscopy. The molecular mass of SCH-MW was determined with Matrix-Assisted Laser Desorption/Ionization-Time of Flight (MALDI-TOF). The teratogenicity of SCH-MW was characterized by the zebrafish embryo (ZFE) model. Antimicrobial activity of SCH-MW was tested with the agar well diffusion method; the inhibitory effect of SCH-MW on biofilm formation was assessed in 96 flat well polystyrene plates. The result revealed that a low concentration of crab-sulfated chitosan inhibited bacterial growth and significantly reduced the anti-biofilm activity of gram-negative and gram-positive bacteria relatively to shrimp. It is potentially against the biofilm formation of pathogenic bacteria.

Synthesis, characterization and antifungal efficacy of chitosan derivatives with triple quaternary ammonium groups

A novel type of water soluble chitosan derivatives (TQCSPX) were synthesized including 3-aminopyridine (TQCSP1) and 3-Amino-4-methylpyridine (TQCSP2). The theoretical structures of TQCSPX were calculated by Gaussian 09 and confirmed by FT-IR, ¹H NMR, ¹³C NMR, elemental analysis and XRD. The antifungal properties of TQCSPX against Phytophthora capsici (P. capsici), Rhizoctonia solani (R. solani), Fusarium oxysporum (F. oxysporum) and Fusarium solani (F. solani) were evaluated at concentrations ranging from 0.2mg/mL to 0.8mg/mL. Antifungal results indicated that the derivatives have significantly enhanced antifungal activity after quaternized compared with the original chitosan (CS). Moreover, TQCSP1 inhibited the growth of P. capsici with inhibitory indices of 91.94% at 0.8mg/mL. The experimental results demonstrated that the increasing number of the positive charge would improve the antifungal efficiency of chitosan, which may provide a novel direction for the development of fungicides.

Antioxidant Activity and Antifungal Activity of Chitosan Derivatives with Propane Sulfonate Groups

We successfully synthesized the water-soluble chitosan derivatives propane sulfonated chitosan (PSCS) and dipropane sulfonated chitosan (DPSCS) in this paper. These derivatives were characterized by FTIR, ¹H NMR, and 13C NMR. Moreover, the antioxidant activity of the chitosan derivatives was evaluated by free radical scavenging ability (against DPPH-radical, hydroxyl-radical, and superoxide-radical) and ferric reducing power. Meanwhile, inhibitory effects against two fungi were also tested. Our results suggested antioxidant abilities and antifungal properties were in order of DPSCS > PSCS > CS, which were consistent with the number of propane sulfonated groups. The scavenging activity of DPSCS against superoxide-radical and DPPH-radical were 94.1% and 100% at 1.6 mg/mL, respectively. The inhibitory indices of DPSCS against P. asparagi and F. oxysporum were up to 82.2% and 94% at 1.0 mg/mL, respectively. Obviously, the number of propane sulfonated groups of chitosan derivatives not only contributes to antioxidant activity, but also to antifungal activity. Therefore, DPSCS with more propane sulfonated groups endowed with antioxidant and antifungal activity that can be used as a candidate material in the food and pharmaceutical industries.

Synthesis of C-coordinated O-carboxymethyl chitosan metal complexes and evaluation of their antifungal activity

Based on a condensation reaction, a chitosan-derivative-bearing amino pyridine group was prepared and subsequently followed by coordination with cupric ions, zinc ions and nickel ions to synthesize chitosan metal complexes. The calculations using the density functional theory (DFT) show that the copper ions and nickel ions underwent dsp² hybridization, the zinc ions underwent sp³ hybridization, and they all formed a coordination bond with the carbon atom in the p-π conjugate group. The antifungal properties of O-CSPX-M against Phytophthora capsici (P. capsici), Verticillium alboatrum (V. alboatrum), Botrytis cinerea (B. cinerea) and Rhizoctonia solani (R. solani) were also assayed. Apparently, chitosan metal complexes showed enhanced antifungal activity against four fungi at the tested concentrations compared to that of chitosan. It was shown that Cu complexes can inhibit the growth of P. capsici 100%, and Ni complexes can inhibit the growth of B. cinerea 77.1% at a concentration of 0.4 mg/mL and 0.2 mg/mL, respectively. The pot experiment also verified the result. In addition, the phytotoxicity experiment showed that O-CSPX-M had no obvious toxicity on wheat leaves. This kind of complexes may represent as an attractive direction for chemical modifications of metal fungicides.

C-coordinated O-carboxymethyl chitosan metal complexes: Synthesis, characterization and antifungal efficacy

A novel type of O-carboxymethyl chitosan Schiff bases (O-CSPX) was synthesized via a condensation reaction. After the coordination reaction of cupric ions, zinc ions and nickel ions, metal complexes (O-CSPX-M) were achieved. The theoretical structure of O-CSPX-M calculated by Gaussian 09 reveals that the copper ions and nickel ions underwent dsp² hybridization, the zinc ions underwent sp³ hybridization, and they all coordinated by the carbon atom in the p-π conjugate group. Then, the structures were confirmed by FT-IR, ¹H NMR, CP-MAS ¹³C NMR, elemental analysis, DSC and XRD. The antifungal properties of O-CSPX-M against Phytophthora capsici (P. capsici), Gibberella zeae (G. zeae), Fusarium oxysporum (F. oxysporum) and Botrytis cinerea (B. cinerea) were evaluated at concentrations ranging from 0.05mg/mL to 0.40mg/mL. The experiments indicated that the derivatives have significantly enhanced antifungal activity after metal ions complexation compared with the original chitosan. Moreover, it was shown that 0.20mg/mL of O-CSPX-Cu can 100% inhibit the growth of P. capsici and 0.20mg/mL of O-CSPX-Ni can 87.5% inhibit the growth of B. cinerea. In addition, the phytotoxicity assay and cell viability assay were also evaluated. The experimental results may provide a novel direction for the development of metal fungicides.

In vivo study on the biocompatibility of chitosan-hydroxyapatite film depending on degree of deacetylation

Chitosan, produced from chitin, is one of the polymers with promising applications in various fields. However, despite diverse research studies conducted on its biocompatibility, its uses are still limited. The main reason is the degree of deacetylation (DOD), which represents the proportion of deacetylated units in the polymer and is directly correlated with its biocompatibility property. In this article, the in vivo biocompatibility of three chitosan-hydroxyapatite composite films composed of chitosan with different DOD values was investigated by traditional biological protocols and novel optical spectroscopic analyses. The DOD of the chitosan obtained from three different manufacturers was estimated and calculated by Raman spectroscopy, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The chitosan with the higher DOD induced a higher incidence of inflammation in skin cells. The amino group density, biodegradability, and crystallinity of chitosan are the three possible factors that need to be considered when determining the biocompatibility of the films for in vivo application, as they led to complicated biological results, resulting in either better or worse inflammation even when using chitosan products with the same DOD. This basic study on the relationship between the DOD and inflammation is valuable for the development of further chitosan-based researches. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1637-1645, 2017.

Synthesis, characterization and antifungal efficacy of C-coordinated O-carboxymethyl chitosan Cu(II) complexes

A novel type of O-carboxymethyl chitosan Schiff bases (O-CSPX) was synthesized via a condensation reaction. After the coordination reaction of cupric ions, Cu(II) complexes (O-CSPX-Cu) were achieved. The theoretical structure of O-CSPX-Cu calculated by Gaussian 09 reveals that the copper ions underwent dsp² hybridization, coordinated by the carbon atom in the p-π conjugate group and the oxygen atoms in the acetate ion. Then, the structures were confirmed by FT-IR, ¹H NMR, CP-MAS ¹³C NMR, elemental analysis, DSC and XRD. The antifungal properties of O-CSPX-Cu against Phytophthora capsici (P. capsici), Gibberella zeae (G. zeae) and Glomerella cingulata (G. cingulata) were evaluated at concentrations ranging from 0.05mg/mL to 0.20mg/mL. The experiments indicated that the derivatives have significantly enhanced antifungal activity after copper ion complexation compared with the original chitosan. Moreover, it was shown that 0.20mg/mL of O-CSP3-Cu and O-CSP4-Cu can 100% inhibit the growth of P. capsici. The experimental results reveal that the antifungal efficiency is related to the space steric hindrance on the benzene ring, which may provide a novel direction for the development of copper fungicides.

Water soluble EDTA-linked chitosan as a zwitterionic flocculant for pH sensitive removal of Cu(ii) ion

Water soluble EDTA-linked chitosan was synthesized and applied to remove Cu(ii) utilizing its property of chelation and pH sensitive precipitation.

Dispersive and FT-Raman spectroscopic methods in food analysis

Raman spectroscopy is a powerful technique for molecular analysis of food samples.

Modulation of osteogenic activity of BMP-2 by cellulose and chitosan derivatives

Polysaccharides with structure and potential bioactivity similar to heparin were synthesized based on cellulose which was regioselectively sulfated, carboxylated or carboxymethylated, and chitosan that was sulfated only. Osteogenic activity of these derivatives was studied in cooperation with BMP-2 using C2C12 myoblast cells as a model system measuring alkaline phosphatase (ALP) activity and the expression of the genes Osterix, Noggin and Runx-2. It was found that highly sulfated chitosan showed the strongest osteogenic activity of all polysaccharides, but only at lower concentrations, while higher concentrations were inhibitory. By contrast, cellulose with a low or intermediate degree of sulfation showed increasing ALP activity and expression of Osterix and Noggin with rising concentrations. Lower sulfated cellulose with a high degree of carboxylation was less osteogenic, but had a positive effect on cell viability, while carboxymethylated cellulose had almost no osteogenic activity. The results indicate that regioselectively sulfated as well as carboxylated cellulose and chitosan possess an osteogenic activity, which makes them interesting candidates for application in tissue engineering of bone.

Synthesis and anticoagulant activity of the quaternary ammonium chitosan sulfates

Quaternary ammonium chitosan sulfates with diverse degrees of substitution (DS) ascribed to sulfate groups between 0.52 and 1.55 were synthesized by reacting quaternary ammonium chitosan with an uncommon sulfating agent (N(SO(3)Na)(3)) that was prepared from sodium bisulfite (NaHSO(3)) through reaction with sodium nitrite (NaNO(2)) in the aqueous system homogeneous. The structures of the derivatives were characterized by FTIR, (1)H NMR and (13)C NMR. The factors affecting DS of quaternary ammonium chitosan sulfates which included the molar ratio of NaNO(2) to quaternary ammonium chitosan, sulfated temperature, sulfated time and pH of sulfated reaction solution were investigated in detail. Its anticoagulation activity in vitro was determined by an activated partial thromboplastin time (APTT) assay, a thrombin time (TT) assay and a prothrombin time (PT) assay. Results of anticoagulation assays showed quaternary ammonium chitosan sulfates significantly prolonged APTT and TT, but not PT, and demonstrated that the introduction of sulfate groups into the quaternary ammonium chitosan structure improved its anticoagulant activity obviously. The study showed its anticoagulant properties strongly depended on its DS, concentration and molecular weight.

Interplay between structure and dynamics in chitosan films investigated with solid-state NMR, dynamic mechanical analysis, and X-ray diffraction

Modern solid-state NMR techniques, combined with X-ray diffraction, revealed the molecular origin of the difference in mechanical properties of self-associated chitosan films. Films cast from acidic aqueous solutions were compared before and after neutralization, and the role of the counterion (acetate vs Cl(-)) was investigated. There is a competition between local structure and long-range order. Hydrogen bonding gives good mechanical strength to neutralized films, which lack long-range organization. The long-range structure is better defined in films cast from acidic solutions in which strong electrostatic interactions cause rotational distortion around the chitosan chains. Plasticization by acetate counterions enhances long-range molecular organization and film flexibility. In contrast, Cl(-) counterions act as a defect and impair the long-range organization by immobilizing hydration water. Molecular motion and proton exchange are restricted, resulting in brittle films despite the high moisture content.