Degradation controllable biomaterials constructed from lysozyme-loaded Ca-alginate microparticle/chitosan composites

Development of double crosslinked sodium alginate/chitosan based hydrogels for controlled release of metronidazole and its antibacterial activity

Double network sodium alginate/chitosan hydrogels were prepared using calcium chloride (CaCl2) and glutaraldehyde as the crosslinking agents by the ionotropic interaction method for controlled metronidazole release. The effect of polymer ratios and CaCl2 amount is investigated by the developing porosity, gel fraction, and extent of swelling in simulated physiological fluids. Interaction between the polymers with the formation of crosslinked structures, good stability, phase nature, and morphology of the hydrogels is revealed by Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy. A sodium alginate/chitosan hydrogel (weight ratio of 75:25) crosslinked with two percent CaCl2 is chosen for the in-situ loading of 200 mg of metronidazole. The drug release kinetics using different models show that the best-fit Korsmeyer-Peppas model suggests metronidazole release from the matrix follows diffusion and swelling-controlled time-dependent non-Fickian transport related to hydrogel erosion. This composition displays enhanced antimicrobial activity against Staphylococcus aureus and Escherichia coli.

The controlled degradation of bacterial cellulose in simulated physiological environment by immobilization and release of cellulase

Bacterial cellulose (BC) has good network structure, biocompatibility, and excellent mechanical properties, and is widely used in the field of biomaterials. The controllable degradation of BC can further broaden its application. Oxidative modification and cellulases may endow BC with degradability, but these methods inevitably lead to the obvious reduction of its initial mechanical properties and uncontrolled degradation. In this paper, the controllable degradation of BC was realized for the first time by using a new controlled release structure that combines the immobilization and release of cellulase. The immobilized enzyme has higher stability and is gradually released in the simulated physiological environment, and its load can control the hydrolysis rate of BC well. Furthermore, the BC-based membrane prepared by this method retains the favorable physicochemical performance of the original BC, including flexibility and great biocompatibility, and holds good application prospects in drug control release or tissue repair.

Recent Advancement of Molecular Structure and Biomaterial Function of Chitosan from Marine Organisms for Pharmaceutical and Nutraceutical Application

Chitosan is an innate cationic biological polysaccharide polymer, naturally obtained from chitin deacetylation, that possesses broad-spectrum properties such as antibacterial, biodegradability, biocompatibility, non-toxic, non-immunogenicity, and so on. Chitosan can be easily modified owing to its molecular chain that contains abundant active amino and hydroxyl groups, through various modifications. Not only does it possess excellent properties but it also greatly accelerates its solubility and endows it with additional special properties. It can be developed into bioactive materials with innovative properties, functions, and multiple uses, especially in the biomedical fields. In this paper, the unique properties and the relationship between the molecular structure of chitosan and its derivatives are emphasized, an overview of various excellent biomedical properties of chitosan and its current progress in the pharmaceutical and nutraceutical field have prospected, to provide the theoretical basis for better development and utilization of new biomedical materials of chitosan and its derivatives.

Diclofenac sustained release from sterilised soft contact lens materials using an optimised layer-by-layer coating

A layer-by-layer (LbL) coating was designed using ionic polysaccharides (chitosan, sodium alginate, sodium hyaluronate) and genipin (crosslinker), to sustain the release of diclofenac sodium salt (DCF) from soft contact lens (SCL) materials. The coating was hydrophilic, biocompatible, non-toxic, reduced bacterial growth and had minor effects on the physical properties of the material, such as wettability, ionic permeability, refractive index and transmittance, which remained within the recommended values for SCLs. The coating was applied on a silicone-based hydrogel and on commercial SofLens and Purevision SCLs. The coating attenuated the initial drug burst and extended the therapeutic period for, at least, two weeks. Relevantly, the problems of sterilizing drug loaded SCLs coated with biopolymers, using classic methods that involve high temperature or radiation, were successfully solved through high hydrostatic pressure (HHP) sterilization.

Polysaccharide-Based Lotus Seedpod Surface-Like Porous Microsphere with Precise and Controllable Micromorphology for Ultrarapid Hemostasis

Rapid water absorption rate has become a bottleneck that limits ultrarapid hemostatic performance of hemostatic microspheres. Herein, we reported a "lotus seedpod surface-like" polysaccharide hemostatic microsphere (PHM) with "macropits on surface" morphology and "micropores in macropits" structure. Unique macropits on surface can promote the water absorption rate because they are advantageous to quickly guide blood into the micropores. Special micropores are internally connected with each other, which endows PHM₄ with high water absorption ratio. During the process of blood entering the micropores from micropits, the pore size decreases gradually. In this way, blood clotting factors could be rapidly concentrated. PHM₄ showed the highest water absorption rate (40.7 mL/s/cm²) and rapid hemostatic property in vivo (hemostatic time shortened from 210 to 45 s). Lotus seedpod surface-like PHMs are believed to have further clinical application as an effective hemostasis.

Adhesion, proliferation and differentiation of human mesenchymal stem cell on chitosan/collagen composite scaffold

In vitro tissue engineering requires a progenitor cell source and a porous scaffold providing three dimensional (3D) supports for growth and differentiation to attain tissue architectures. This research focused on fabrication and characterization of 3D porous scaffolds using chitosan (CS), collagen (CG) and chitosan-collagen (CS-CG) composite to investigate their influence on human mesenchymal stem cell (hMSC) adhesion, proliferation and differentiation. Material dependent variations in porous morphology and mechanical behavior of the fabricated CS, CG and CS-CG scaffold showed significant impact on hMSC adhesion, proliferation and differentiation. The maximum hMSC adhesion and proliferation was reported on CS-CG scaffold among all fabricated scaffold groups. Interconnectivity of pores structure in CS-CG scaffold was considered as preferable attribute for such enhanced growth and distribution throughout the scaffold. Besides, CS scaffold with well interconnected pores showed poor adhesion and proliferation because of inadequate adhesion motifs. In case of CG scaffold, optimum growth and distribution of hMSC occurs only at the surface because of the absence of interconnectivity in their pore structures. Likewise, osteogenic differentiation of hMSC occurs most preferably in CS-CG composite scaffold among all scaffold groups. Such enhanced hMSC proliferation and differentiation in CS-CG scaffold significantly influenced on mechanical behavior of scaffold which is essential for in vivo application of a bone tissue implant. Thus CS-CG composite scaffold holds promise to be a suitable platform for in vitro engineering of bone tissue implant.

Agarose-chitosan hydrogel-immobilized horseradish peroxidase with sustainable bio-catalytic and dye degradation properties

Herein, we developed and characterized robust agarose-chitosan hydrogel using N‑hydroxysuccinimide (NHS) as a mild chemical cross-linker. The hydrogel offered a simple, effective and eco-friendlier support material with >90% of immobilization efficiency of horseradish peroxidase. The surface morphology and functional properties of the agarose-chitosan hydrogel with and without immobilized horseradish peroxidase were investigated by scanning electron microscopy and Fourier-transform infrared, respectively. The agarose-chitosan hydrogel-immobilized horseradish peroxidase (ACH-HRP) exhibited wide-working pH and temperature stability, and promising reusability for its substrate oxidation. The ACH-HRP preserved a better activity under acidic environments, pH 4.0 (38 vs. 5.9%), and well stabilized under alkaline conditions, retaining a 3.9-folds greater activity than a free counterpart at pH 10. With reference to a free enzyme, 1.6- and 4-fold greater catalytic activity was achieved at 50 and 70 °C, respectively, by the immobilized HRP. Further, the hydrogel displayed insignificant loss in enzyme functionality sustaining above 90% and 60% of original activity after 5 and 10 continuous cycles of use. HPLC profile corroborated the enzyme-assisted Reactive Blue 19 (RB-19) degradation, whereas UPLC/MS analysis scrutinized the dye degradation intermediates and a tentative mechanistic degradation pathway was proposed. In conclusion, the results demonstrate that ACH-HRP is a promising option for use as industrial biocatalyst in diverse biotechnological applications.

Nanoceria-loaded injectable hydrogels for potential age-related macular degeneration treatment

The major purpose of this article is to evaluate oligochitosan coated cerium oxide nanoparticles (OCCNPs) alginate laden injectable hydrogels and their potential treatment for age-related macular degeneration (AMD). The water soluble OCCNPs were loaded within injectable hydrogels as antioxidative agents. The release of OCCNPs from hydrogel, radical scavenging properties, and biocompatibility were evaluated and calculated in vitro. The effects of OCCNP laden hydrogel downregulating expression of angiogenic proteins and proinflammatory cytokines were quantified in human retinal pigment epithlium-19 (ARPE-19) and umbilical endothelium cell lines. The hydrogels behaved with moderate swelling and controllable degradation. The laden OCCNPs were released in a controlled manner in vitro during two months of testing. The OCCNP loaded hydrogels exhibited robust antioxidative properties in oxygen radical absorbance capacity tests and reduced apoptosis in H2 O2 -induced ARPE-19 cells. Furthermore, OCCNP loaded injectable hydrogels are biocompatible and suppressed the ipopolysaccharides-induced inflammation response in ARPE-19 cells, and inhibited expression of vascular endothelium growth factor in human ARPE-19 and umbilical endothelium cell lines. The alginate-gelatin injectable hydrogel loaded OCCNPs are biocompatible and have high potential in protecting cells from apoptosis, angiogenesis, and production of proinflammatory cytokines in AMD cellular models. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2795-2804, 2018.

Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers

Advances in design and fabrication of functional micro/nanomaterials have sparked growing interest in creating new mobile microswimmers for various healthcare applications, including local drug and other cargo ( e. g., gene, stem cell, and imaging agent) delivery. Such microswimmer-based cargo delivery is typically passive by diffusion of the cargo material from the swimmer body; however, controlled active release of the cargo material is essential for on-demand, precise, and effective delivery. Here, we propose a magnetically powered, double-helical microswimmer of 6 μm diameter and 20 μm length that can on-demand actively release a chemotherapeutic drug, doxorubicin, using an external light stimulus. We fabricate the microswimmers by two-photon-based 3D printing of a natural polymer derivative of chitosan in the form of a magnetic polymer nanocomposite. Amino groups presented on the microswimmers are modified with doxorubicin by means of a photocleavable linker. Chitosan imparts the microswimmers with biocompatibility and biodegradability for use in a biological setting. Controlled steerability of the microswimmers is shown under a 10 mT rotating magnetic field. With light induction at 365 nm wavelength and 3.4 × 10^-1 W/cm² intensity, 60% of doxorubicin is released from the microswimmers within 5 min. Drug release is ceased by controlled patterns of light induction, so as to adjust the desired release doses in the temporal domain. Under physiologically relevant conditions, substantial degradation of the microswimmers is shown in 204 h to nontoxic degradation products. This study presents the combination of light-triggered drug delivery with magnetically powered microswimmer mobility. This approach could be extended to similar systems where multiple control schemes are needed for on-demand medical tasks with high precision and efficiency.

Biodegradable, pH-sensitive chitosan beads obtained under microwave radiation for advanced cell culture

A new type of promising chitosan beads with advanced properties were obtained under microwave radiation according to Green Chemistry principles. Biomaterials were prepared using chitosan as raw material and glutamic acid/1,5-pentanodiol mixture as crosslinking agents. Additionally beads were modified with Tilia platyphyllos extract to enhance their antioxidant properties. Beads were investigated over their chemical structure by FT-IR analysis. Also their morphology has been investigated by SEM method. Additionally swelling capacity of the obtained hydrogels was determined. Lack of cytotoxicity has been confirmed by MTT assay. Proliferation studies were carried out on L929 mouse fibroblasts. Advanced properties of the obtained beads were investigated by studying pH sensitivity and antioxidant properties by DPPH method. Also susceptibility to degradation and biodegradation by Sturm Test method was evaluated. Results shows that proposed chitosan beads and their eco-friendly synthesis method can be applied in cell therapy and tissue engineering.

Chitosan/alginate based multilayers to control drug release from ophthalmic lens

In this study we investigated the possibility of using layer-by-layer deposition, based in natural polymers (chitosan and alginate), to control the release of different ophthalmic drugs from three types of lens materials: a silicone-based hydrogel recently proposed by our group as drug releasing soft contact lens (SCL) material and two commercially available materials: CI26Y for intraocular lens (IOLs) and Definitive 50 for SCLs. The optimised coating, consisting in one double layer of (alginate - CaCl2)/(chitosan+glyoxal) topped with a final alginate-CaCl2 layer to avoid chitosan degradation by tear fluid proteins, proved to have excellent features to control the release of the anti-inflammatory, diclofenac, while keeping or improving the physical properties of the lenses. The coating leads to a controlled release of diclofenac from SCL and IOL materials for, at least, one week. Due to its high hydrophilicity (water contact angle≈0) and biocompatibility, it should avoid the use of further surface treatments to enhance the useŕs comfort. However, the barrier effect of this coating is specific for diclofenac, giving evidence to the need of optimizing the chemical composition of the layers in view of the desired drug.

Composite Chitosan/Agarose Ferrogels for Potential Applications in Magnetic Hyperthermia

Composite ferrogels were obtained by encapsulation of magnetic nanoparticles at two different concentrations (2.0 and 5.0 % w/v) within mixed agarose/chitosan hydrogels having different concentrations of agarose (1.0, 1.5 and 2.0% (w/v)) and a fixed concentration of chitosan (0.5% (w/v)). The morphological characterization carried out by scanning electron microscopy showed that dried composite ferrogels present pore sizes in the micrometer range. Thermogravimetric measurements showed that ferrogels present higher degradation temperatures than blank chitosan/agarose hydrogels without magnetic nanoparticles. In addition, measurements of the elastic moduli of the composite ferrogels evidenced that the presence of magnetic nanoparticles in the starting aqueous solutions prevents to some extent the agarose gelation achieved by simply cooling chitosan/agarose aqueous solutions. Finally, it is shown that composite chitosan/agarose ferrogels are able to heat in response to the application of an alternating magnetic field so that they can be considered as potential biomaterials to be employed in magnetic hyperthermia treatments.

Chitosan/agarose hydrogels: cooperative properties and microfluidic preparation

The preparation of composite biopolymer hydrogels offers the capability to produce biocompatible and biodegradable materials with cooperative properties. In this paper, two natural polymers, namely, chitosan and agarose were employed to prepare composite hydrogels with dual pH and temperature properties. The elastic modulus of the composite hydrogels increased with agarose concentration reaching the value of 1 kPa for the chitosan/agarose gel with a 2% (w/v) concentration of agarose. In addition, composite gels exhibited a higher stability in acidic aqueous solutions, in comparison with agarose gels. The drug release properties of the composite hydrogels were tested by loading a model anticancer drug, 5-Fluorouracil, in the hydrogel interior. At pH=7.4, the cumulative release of 5-FU was ∼ 50% within 96 h and decreased to ∼ 33% at pH = 5.2, which was attributed to the different solubility of 5-FU as a function of pH. The preparation of composite microgels with controllable dimensions in the range from 42 to 18 μm and with narrow size distribution (polidispersity not exceeding 1.5%) was achieved by the microfluidic emulsification of an aqueous mixture of chitosan and agarose and subsequent gelation of the precursor droplets by cooling.