Microscopically-viewed relationship between the chain conformation and ultimate Young's modulus of a series of arylate polyesters with long methylene segments

From Polyester Plastics to Diverse Monomers via Low-Energy Upcycling

Polyester plastics, constituting over 10% of the total plastic production, are widely used in packaging, fiber, single-use beverage bottles, etc. However, their current depolymerization processes face challenges such as non-broad spectrum recyclability, lack of diversified high-value-added depolymerization products, and crucially high energy consumption. Herein, an efficient strategy is developed for dismantling the compact structure of polyester plastics to achieve diverse monomer recovery. Polyester plastics undergo swelling and decrystallization with a low depolymerization energy barrier via synergistic effects of polyfluorine/hydrogen bonding, which is further demonstrated via density functional theory calculations. The swelling process is elucidated through scanning electron microscopy analysis. Obvious destruction of the crystalline region is demonstrated through X-ray crystal diffractometry curves. PET undergoes different aminolysis efficiently, yielding nine corresponding high-value-added monomers via low-energy upcycling. Furthermore, four types of polyester plastics and five types of blended polyester plastics are closed-loop recycled, affording diverse monomers with exceeding 90% yields. Kilogram-scale depolymerization of real polyethylene terephthalate (PET) waste plastics is successfully achieved with a 96% yield.

Effect of molar mass and alkyl chain length on the surface properties and biocompatibility of poly(alkylene terephthalate)s for potential cardiovascular applications

Cardiovascular diseases are the leading cause of death worldwide. Treatments for occluded arteries include balloon angioplasty with or without stenting and bypass grafting surgery. Poly(ethylene terephthalate) is frequently used as a vascular graft material, but its high stiffness leads to compliance mismatch with the human blood vessels, resulting in altered hemodynamics, thrombus formation and graft failure. Poly(alkylene terephthalate)s (PATs) with longer alkyl chain lengths hold great potential for improving the compliance. In this work, the effect of the polymer molar mass and the alkyl chain length on the surface roughness and wettability of spin-coated PAT films was investigated, as well as the endothelial cell adhesion and proliferation on these samples. We found that surface roughness generally increases with increasing molar mass and alkyl chain length, while no trend for the wettability could be observed. All investigated PATs are non-cytotoxic and support endothelial cell adhesion and growth. For some PATs, the endothelial cells even reorganized into a tubular-like structure, suggesting angiogenic maturation. In conclusion, this research demonstrates the biocompatibility of PATs and their potential to be applied as materials serving cardiovascular applications.

From Nano-Crystals to Periodically Aggregated Assembly in Arylate Polyesters-Continuous Helicoid or Discrete Cross-Hatch Grating?

This work used several model arylate polymers with the number of methylene segment n = 3, 9, 10, and 12, which all crystallized to display similar types of periodically banded spherulites at various T_c and kinetic factors. Universal mechanisms of nano- to microscale crystal-by-crystal self-assembly to final periodic aggregates showing alternate birefringence rings were probed via 3D dissection. The fractured interiors of the birefringent-banded poly(decamethylene terephthalate) (PDT) spherulites at T_c = 90 °C revealed multi-shell spheroid bands composed of perpendicularly intersecting lamellae bundles, where each shell (measuring 4 μm) was composed of the interior tangential and radial lamellae, as revealed in the SEM results, and its shell thickness was equal to the optical inter-band spacing (4 μm). The radial-oriented lamellae were at a roughly 90° angle perpendicularly intersecting with the tangential ones; therefore, the top-surface valley band region appeared to be a submerged "U-shape", where the interior radial lamellae were located directly underneath. Furthermore, the universal self-assembly was proved by collective analyses on the three arylate polymers.

Potential of poly(alkylene terephthalate)s to control endothelial cell adhesion and viability

Poly(ethylene terephthalate) (PET) is known for its various useful characteristics, including its applicability in cardiovascular applications, more precisely as synthetic bypass grafts for large diameter (≥ 6 mm) blood vessels. Although it is widely used, PET is not an optimal material as it is not interactive with endothelial cells, which is required for bypasses to form a complete endothelium. Therefore, in this study, poly(alkylene terephthalate)s (PATs) have been studied. They were synthesized via a single-step solution polycondensation reaction, which requires mild reaction conditions and avoids the use of a catalyst or additives like heat stabilizers. A homologous series was realized in which the alkyl chain length varied from 5 to 12 methylene groups (n = 5-12). Molar masses up to 28,000 g/mol were obtained, while various odd-even trends were observed with modulated differential scanning calorimetry (mDSC) and rapid heat-cool calorimetry (RHC) to access the thermal properties within the homologous series. The synthesized PATs have been subjected to in vitro cell viability assays using Human Umbilical Vein Endothelial Cells (HUVECs) and Human Dermal Microvascular Endothelial Cells (HDMECs). The results showed that HUVECs adhere and proliferate most pronounced onto PAT_(n=9) surfaces, which could be attributed to the surface roughness and morphology as determined by atomic force microscopy (AFM) (i.e. R_q = 204.7 nm). HDMECs were investigated in the context of small diameter vessels and showed superior adhesion and proliferation after seeding onto PAT_(n=6) substrates. These preliminary results already pave the way towards the use of PAT materials as substrates to support endothelial cell adhesion and growth. Indeed, as superior endothelial cell interactivity compared to PET was observed, time-consuming and costly surface modifications of PET grafts could be avoided by exploiting this novel material class.

Vitamin C Loaded Polyethylene: Synthesis and Properties of Precise Polyethylene with Vitamin C Defects via Acyclic Diene Metathesis Polycondensation

A polyethylene-like polymer with an in-chain vitamin C group was synthesized by olefin metathesis polymerization. Here, we describe both the synthesis and a comprehensive physical characterization. Because of the olefin metathesis synthesis, the vitamin C groups are equidistantly arranged in the polyethylene (PE) main chain. Their separation was adjusted to 20 CH₂ units. After hydrogenation, a semicrystalline polymer is obtained that is soluble in polar solvents. Because of its size and steric effect, the vitamin C acts as a chain defect, which is expelled from the crystal lattice, yielding a lamellar crystal with a homogeneous thickness corresponding to the interdefect distance. The physical properties were examined by various methods including differential scanning calorimetry, X-ray scattering, and transmission electron microscopy. We show that vitamin C retains its radical scavenger properties despite being incorporated into a polyethylene chain. Furthermore, we demonstrate that it is degrading in alkaline conditions. To complete its suitability as a biocompatible material, cytotoxicity and cell uptake experiments were performed. We show that the polymer is nontoxic and that it is taken up in nanoparticular form via endocytosis processes into the cytoplasm of cells.

Structural Evolution Mechanism of Crystalline Polymers in the Isothermal Melt-Crystallization Process: A Proposition Based on Simultaneous WAXD/SAXS/FTIR Measurements

Time-resolved simultaneous measurements of wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) (and FTIR spectra) were performed for various kinds of crystalline polymers in isothermal melt-crystallization processes, from which the common features of the structural evolution process as well as the different behaviors intrinsic to the individual polymer species were extracted. The polymers targeted here were polyethylene, isotactic polypropylene, polyoxymethylene, aliphatic nylon, vinylidene fluoride copolymer, trans-polyisoprene, and poly(alkylene terephthalate). A universal concept of the microscopically viewed structural evolution process in isothermal crystallization may be described as follows: (i) the small domains composed of locally regular but more or less disordered helical chain segments are created in the melt (this important information was obtained by the IR spectral data analysis); (ii) these domains grow larger as the length and number of more regular helical segments increase with time; (iii) the correlation among the domains becomes stronger and they approach each other; and (iv) they merge into the stacked lamellar structure consisting of the regularly arranged crystalline lattices. The inner structure of the domains is different depending on the polymer species, as known from the IR spectral data.

Three-dimensional interior analyses on periodically banded spherulites of poly(dodecamethylene terephthalate)

Polarized optical, atomic force, and scanning electron microscopy images showing the correlations of three-dimensional crystal arrangements with optical properties exhibited by poly(dodecamethylene terephthalate).