Facile synthesis of novel HTPBs and EHTPBs with high cis-1,4 content and extremely low glass transition temperature

Fabrication of Hydroxy-Terminated Polybutadiene with Piezoelectric Property by Functionalized Branch Chain Modification

Hydroxyl-terminated polybutadiene (HTPB)-based piezoelectric polymer (m-HTPB) is prepared for the first time by functionalized branch chain modification strategy. In the presence of HTPB with >98.8% cis-1,4 content, the C=C bond partly breaks down, and functionalized acetylferrocene groups are introduced to the cis-1,4 polybutadiene branch chain, retaining the high cis-1,4 content of HTPB. The whole process is conducted under mild conditions, without complicated manipulations. The microstructure and molecular weight of m-HTPB are characterized by Fourier-transform infrared (FTIR) spectra, ¹H or ¹³C nuclear magnetic resonance spectrum (NMR), and gel permeation chromatography (GPC). The thermal properties of HTPB and m-HTPB are determined by differential scanning calorimetry (DSC). Electrochemical investigations reveal that m-HTPB exhibits higher conductance compared with HTPB. The m-HTPB flexible piezoelectric polymer is further used for in situ and real-time pressure monitoring. This simple and effective strategy provides a promising polymeric material for flexible piezoelectric sensors.

N-Doped Graphene Quantum Dot Nanoparticle Synthesis of Optical Active Thermal Stable Polyurea Nanocomposites Using Polybutadiene Chain Modification

Geminate thermal stability with optical characteristics is a moving forward achievement in the preparation of polybutadiene-based polyurea nanocomposites. In this regard, nitrogen-doped graphene quantum dots were synthesized from a one-pot hydrothermal reaction of citric acid with urea in an aqueous solution. An in situ polymerization approach was used for the synthesis of polyurea from the reaction of telechelic amine functionalized polybutadiene and toluene diisocyanate (TDI) in the presence of the DBTDL catalyst. Nanocomposites were prepared using 1–3 weight percent of graphene N-quantum dot nanoparticles in the polymer matrix. 1H-NMR and FT-IR spectroscopy techniques elaborated successful synthesis of primary polymer binder, polyurea and nanocomposites. Thermal degradation and characteristics were investigated using the TGA/DTG and DSC methods; lower degradation rates with progressed thermal stabilities as well as proportionate thermal characteristics with wider thermal service range were obtained especially in 3 wt% nanocomposite. Optical behavior information of samples was studied using UV-vis absorption and photoluminescence (PL) spectrometers. EDX, SEM, and AFM techniques confirmed successful nanoparticle and nanocomposite synthesis with improved morphologic and topographic properties.

Room-Temperature Solid-State UV Cross-Linkable Vitrimer-like Polymers for Additive Manufacturing

In this paper, a UV cross-linkable vitrimer-like polymer, ureidopyrimidinone functionalized telechelic polybutadiene, is reported. It is synthesized in two steps. First, 2(6-isocyanatohexylaminocarbonylamino)-6-methyl-4[1H]-pyrimidinone (UPy-NCO) reacts with hydroxy-functionalized polybutadiene (HTPB) to obtain UPy-HTPB-UPy, and then the resulted UPy-HTPB-UPy is cross-linked under 365 nm UV light (photo-initiator: bimethoxy-2-phenylacetophenone, DMPA). Further investigation reveals that the density of cross-linking and mechanical properties of the resulting polymers can be tailored via varying the amount of photo-initiator and UV exposure time. Before UV cross-linking, UPy-HTPB-UPy is found to be vitrimer-like due to the quadruple hydrogen-bonding interactions. The UPy groups at the end of the chain also enable for rapid solidification upon the evaporation of the solvent. The unsaturated double bonds in the HTPB chains enable UPy-HTPB-UPy to be UV cross-linkable in the solid state at room temperature. After cross-linking, the polymers have good shape memory effect (SME). Here, we demonstrate that this type of polymer can have many potential applications in additive manufacturing. In the cases of fused deposition modelling (FDM) and direct ink writing (DIW), not only the strength of the interlayer bonding but also the strength of the polymer itself can be enhanced via UV exposure (from thermoplastic to thermoset) either during printing or after printing. The SME after cross-linking further helps to achieve rapid volumetric additive manufacturing anytime and anywhere.

Bioinspired modified graphene oxide/polyurethane composites with rapid self-healing performance and excellent mechanical properties

Self-healing efficiency and mechanical strength are always a pair of mechanical contradictions of a polymer. Herein, a series of novel mussel-inspired modified graphene oxide/polyurethane composites were successfully fabricated via rational molecular design and introducing hyperbranched polymer-modified graphene oxide. The composites exhibit outstanding self-healing performances with a self-healing efficiency of 87.9%. Especially, their self-healing properties possess exceptional water-insensitivity, which presents a high self-healing efficiency of 92.5% under 60 °C water for 2 h and 74.6% under 25 °C water for 6 h. Furthermore, the tensile strength of the composites increased by 107.7% with a high strain of 2170%. In addition, the composites show a remarkable recovery capability of 76.3% and 83.7% under tensile and compression loading, respectively, after 20 cycles. This strategy shows prominent application potential in high-performance solid propellants, protective coating, electronic skin, soft sensors and other water-insensitive devices.

We successfully modified graphene oxide with amino-terminated hyperbranched polyamide(MGO), and obtained novel mussel-inspired MGO/polyurethane composites with outstanding self-healing and mechanical performances via rational molecular design.

Hyperbranched polyamide modified graphene oxide-reinforced polyurethane nanocomposites with enhanced mechanical properties

As is well known, it is difficult to simultaneously improve both the strength and elongation at break of polymers filled with nanomaterials. This work obtained high-performance composites with enhanced strength and elongation at break via cross-linking hydroxyl-terminated polybutadiene (HTPB) chains with hyperbranched-polyamide-modified graphene oxide (HGO), and the preparation, characterization, and mechanical properties of the composites serving as a composite solid-propellant binder have been described in detail. Compared with pure HTPB polyurethane (P-HTPB), the tensile strength and elastic modulus of the composite containing 0.1 wt% HGO (H-0.1/HTPB) increase by 57.8% and 65.3%, respectively. Notably, the elongation at break of the H-0.1/HTPB composite can reach up to 1292.6%, which is even higher than that of P-HTPB. Moreover, the capabilities of the composites to resist deformation have also been enhanced significantly. The glass transition temperatures of the composites are still extremely low (∼-73 °C), which is beneficial for their applications. It can be expected that this study can provide an effective fabrication approach and strategy for preparing high-performance polyurethane composites.

Mussel-inspired and aromatic disulfide-mediated polyurea-urethane with rapid self-healing performance and water-resistance

Although lots of methods have been developed for self-healing materials, it remains a formidable challenge to achieve a thermosetting material with water-insensitive and self-healing properties at room temperature. Nature always provides intelligent strategies for developing advanced materials with superior properties. Herein, a novel self-healable polyurea-urethane was rationally designed by combining mussel adhesive protein-mimetic structure and dynamic aromatic disulfide bonds. It achieves high self-healing efficiency of 98.4% at room temperature for only 6 h and 90% at 60℃ for only 30 min without any external stimuli. Impressively, this self-healing capability possesses exceptional water-resistance, which presents high self-healing efficiency of 98.1% for 2 h and 82.1% for 6 h in 60℃ and 25℃ water, respectively. Besides, the designed polyurea-urethane exhibits excellent mechanical properties such as high elongation at break of 2400%, notch-insensitive stretching elongation of 1500% and notable recovery capability. This strategy shows promising application potential in solid propellants, protective coating, electronic skin, soft sensors and other water-resistant devices.

Using Epoxidized Solution Polymerized Styrene-Butadiene Rubbers (ESSBRs) as Coupling Agents to Modify Silica without Volatile Organic Compounds

Rubber used in tire is usually strengthened by nanofiller, and the most popular nanofiller for tire tread rubber is nano silica, which can not only strengthen rubber but also lower the tire rolling resistance to reduce fuel consumption. However, silica particles are difficult to disperse in the rubber matrix because of the abundant silicon hydroxyl on their surface. Silane coupling agents are always used to modify silica and improve their dispersion, but a large number of volatile organic compounds (VOCs) are emitted during the manufacturing of the nanosilica/rubber composites because of the condensation reaction between silane coupling agents and silicon hydroxyl on the surface of silica. Those VOCs will do great harm to the environment and the workers’ health. In this work, epoxidized solution polymerized styrene-butadiene rubbers (ESSBR) with different epoxy degrees were prepared and used as macromolecular coupling agents aimed at fully eliminating VOCs. Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) analyses verified that the different ESSBRs were successfully synthesized from solution polymerized styrene-butadiene rubbers (SSBR). With the help of the reaction between epoxy groups and silicon hydroxyl without any VOC emission, nanosilica can be well dispersed in the rubber matrix when SSBR partially replaced by ESSBR which was proved by Payne effect and TEM analysis. Dynamic and static mechanical testing demonstrated that silica/ESSBR/SSBR/BR nanocomposites have better performance and no VOC emission compared with Bis-(γ-triethoxysilylpropyl)-disulfide (TESPD) modified silica/rubber nanocomposites. ESSBR is very hopeful to replace traditional coupling agent TESPD to get high properties silica/rubber nanocomposites with no VOCs emission.

Preparation, Characterization of Propargyl Terminal Polybutadiene and Its Crosslinked Elastomers Properties

Propargyl terminal Polybutadiene (PTPB) was successfully prepared through hydroxyl terminal polybutadiene (HTPB) end-capping modification. The FTIR and ¹³C NMR results indicated that the HTPB terminal hydroxyl was thoroughly replaced and yielded the target product, PTPB, with a theoretical propargyl content of 0.66 mmol g⁻¹. In comparison with HTPB, PTPB has a lower viscosity. Using 1,6-diazide hexane as a curing agent, polytriazole crosslinked polybutadiene (PT_riPB) elastomers with various functional molar ratios (R) were prepared by CuAAC reaction, and the glass transition temperatures of the resultant PT_riPB elastomers were approximately −75 °C, measured by differential scanning calorimetry (DSC), nearly independent of elastomer R values. Mechanical tests indicated, that with the increase in R, the mechanical properties of PT_riPB elastomers exhibit a parabolic dependence on R. In addition, the thermal stability of PT_riPB elastomers were also studied. The findings revealed some fundamental features of polytriazole crosslinking elastomer prepared by CuAAC reaction.

Flexible epoxy composite coatings modified by reactive rubber with improvements in water and corrosive resistances

Epoxy composites were modified by reactive polybutadiene, and their resistance to T-bend and liquid permeation was evaluated to develop flexible epoxy composite coatings with good resistance to corrosive media. The composites’ resistance to bending on galvanic sheets was improved with the addition of up to around 15 wt.% amino liquid polybutadiene (ALPB) as reflected by the cross-section images after bending tests and bending times at break. The initial impedance increased with the addition of up to 15 wt.% ALPB in the composites, whereas the resistance reduced in a much slow rate with immersion time for the sample containing ALPB at around 10 wt.%. This result suggested that their resisting ability depended on the amount and dispersion of ALPB. The Rc and Cc parameters from the electrochemical impedance spectroscopy measurements revealed that the improvement in resistance to electrolyte resulted from the compactness increment at certain range of ALPB additions, which was also supported by their water uptake trends. Moreover, the addition of ALPB above 20% resulted in severe aggregations and phase separations. The resulting reduced compactness reflects the fact that the excessive reactive rubber addition leads to the negative effects on their resisting ability upon both T-bend and liquid permeation.

Preparation, film fabrication and gas-sensitive responsive properties of MWCNTs@PS-b-HTPB5-b-PS conductive polymer nanocomposites

Novel nanocomposites consisting of polystyrene-block-polybutadienyl polyhexamethylene dicarbamate-block-polystyrene (PS-b-HTPB5-b-PS) and multiwalled carbon nanotubes (MWCNTs) were designed and prepared via noncovalent interactions. Scanning electron microscopy and transmission electron microscopy observations showed that segregated networks of MWCNTs were formed due to the cladding of PS-b-HTPB5-b-PS, presenting a parallel-arranged topology of the MWCNTs in a continuous PS-b-HTPB5-b-PS phase, which improved the dispersibility of the MWCNTs. The nanocomposites were fabricated into vapor sensing elements to detect CH2Cl2 vapor in the environment, exhibiting excellent responsive sensitivity, reproducibility and a low limit of detection (LOD) of 1 ppm when exposed to CH2Cl2 vapor. The chain extension of HTPB overcame the fragility and improved the tenacity of the thin films, and the responsivity was optimized by adjusting the content of the MWCNTs and the length of the PS chains. The newly developed conductive composites can be applied as a promising vapor sensor to accurately monitor CH2Cl2 vapor in the environment.

Study on Epoxy Resin Toughened by Epoxidized Hydroxy-Terminated Polybutadiene

Epoxy resin (EP) was toughened by epoxidized hydroxy-terminated polybutadiene (EHTPB), with the corresponding modified epoxy resin being prepared. In this paper, the microstructure of EHTPB-modified epoxy resin was characterized, while the influence of different contents of EHTPB on curing kinetics, mechanical properties, morphology, thermal properties, dynamic thermomechanical (DMA) properties and crosslink density of the modified epoxy resin were also discussed. The results showed that the EHTPB-modified epoxy resin was successfully prepared and cured completely. The activation energy (Ea) of the modified epoxy resin decreased after the addition of EHTPB. With an increase in the EHTPB content, the tensile strength (σm) of the modified epoxy resin decreased and the breaking elongation (εb) increased gradually. The initial decomposition temperature (T5%) and glass transition temperature (Tg) of the modified epoxy resin decreased with an increase in the EHTPB content. The modified epoxy resin had a rough fractured surface and the interface was blurred, presenting a ductile fracture.