Synthesis and memory characteristics of novel soluble polyimides based on asymmetrical diamines containing carbazole

Investigation of thermal, antibacterial and heavy metal ion removal behavior of polyamide/polyimide iron oxide nanocomposites

In this study, a newly-designed diamine (DA) containing pyridine and carbazole groups was synthesized and the relevant polyamides (PAs) and polyimides (PIs) were prepared by polymerization reaction between the DA monomer and terephthalic acid, adipic acid, and pyromellitic dianhydride. In addition, polymer nanocomposites were prepared through a combination of the synthesized polymers with modified magnetite iron oxide nanoparticles. The synthesized compounds were fully characterized by hydrogen nuclear magnetic resonance (1HNMR), fourier-transform infrared (FTIR), field emitting scanning electron microscopy (FESEM), energy dispersive X-Ray (EDX), Transmission electron microscopy (TEM), Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TGA) analyses. All of the synthesized properties of compounds such as thermal stability, viscosity, elimination capability of heavy metals ions adsorption, and antibacterial activity were investigated. Polyamides and PI showed good solubility in aprotic solvents and the viscosity was in the range of 0.72–0.89 dL/g. Also, the glass-transition temperature (Tg) of synthetic polymers was in the range of 214–273°C and 10% weight loss temperatures (T10%) for the synthesized compounds were in the temperature range of 280–492°C in N2, and the percentage of residual ash between 61 and 74%. The adsorption rate of Hg2+, Co2+, Pb2+, Cr2+, and Cd2+ metal ions by PA containing terephthalic acid (PAT) and its nanocomposite (NCPAT) showed that nanocomposite has a better performance compared to PAT. The highest and lowest removal efficiency was related to Hg2+ and Pb2+ ion, respectively. Finally, antibacterial test results against Gram-positive and Gram-negative bacteria showed favorable inhibitory effects of all the synthesized polymers.

Effect of a "Zn Bridge" on the Consecutively Tunable Retention Characteristics of Volatile Random Access Memory Materials

Polyimide memory materials with a donor-acceptor structure based on a charge-transfer mechanism exhibit great potential for next-generation information storage technology due to their outstanding high-temperature resistance and good dimensional and chemical stability. Precisely controlling memory performance by limited chemical decoration is one of core challenges in this field. Most reported work mainly focuses on designing novel and elaborate electron donors or acceptors for the expected memory behavior of polyimides; this takes a lot of time and is not always efficacious. Herein, we report a series of porphyrinated copolyimides coPI-Znx (x=5, 10, 20, 50, 80), where x represents the mole percentage of Zn ion in the central core of the porphyrin. Experimental and theoretical analysis indicate that the Zn ion could play a vital bridge role in promoting the formation and stabilization of a charge-transfer complex by enhancing the hybridization of local and charge transfer (HLCT) excitations of porphyrinated polyimides, endowing coPI-Znx with volatile random access memory performance and continuously tunable retention time. This work could provide one simple strategy to precisely regulate memory performance merely by altering the metal content in porphyrinated polyimides.

New transparent and thermally stable cardo poly(ether imide)s derived from 10,10-bis[4-(4-amino-2-pyridinoxy)phenyl]-9(10H)-anthrone

A new diamine bearing flexible ether, rigid pyridine, and bulky anthrone pendent group, 10,10-bis[4-(4-amino-2-pyridinoxy)phenyl]-9(10 H)-anthrone (BAPPA), was prepared in three steps from anthrone. BAPPA was reacted with six conventional aromatic dianhydrides in N, N-dimethylacetamide (DMAc) to form the corresponding new poly(ether imide)s (PEIs) via the poly(ether amic acid) (PEAA) precursors with inherent viscosities ranging from 0.85 dL g−1 to 1.26 dL g−1 and thermal imidization. All the PEAAs could be cast from DMAc solution and thermally converted into transparent, flexible, and tough PEI films with tensile strength of 72.2–112.4 MPa, tensile modulus of 1.8–2.1 GPa, and elongation at break of 10–18%. These PEIs were predominantly amorphous and displayed excellent thermal stability with the glass transition temperature of 290–388°C, the 5% weight loss temperature of 480–514°C, and the residue of 68–43% at 800°C in nitrogen. The PEIs derived from 1,4-bis(3,4-dicarboxyphenoxy)benzene dianhydride and 4,4′-hexafluoroisopropylidenediphathalic anhydride exhibited excellent solubility in organic solvents such as N-methyl-2-pyrrolidinone, DMAc, N, N-dimethylformamide, pyridine, and even in tetrahydrofuran. Meanwhile, these PEIs also exhibited high optical transparency with the ultraviolet cutoff wavelength in the 374–427 nm range and the wavelength of 80% transparency in the range of 468–493 nm.

Novel carbazole-based donor-isoindolo[2,1-a]benzimidazol-11-one acceptor polymers for ternary flash memory and light-emission

Three novel donor-acceptor polymers (PCz0, PCz2 and PCz4) based on 9-(9-heptadecanyl)-9H-carbazole and isoindolo[2,1-a]benzimidazol-11-one with fluorine substituents (0, 2 and 4) on the acceptor unit were prepared by Suzuki polymerization. The synthesized polymers were studied by theoretical calculation, and optical and electrochemical characterizations to further investigate the performance of memory storage and light-emission. The memory devices of the three polymers all exhibited obvious ternary flash behavior with total ON/OFF state current ratio around 104 and threshold voltages below 3.0 V, with no other blending or doping. Bright emissions of an electroluminescence device based on PCz0 was obtained at 556 nm, the maximum brightness was 2006 cd m-2 with EQE of 0.21%. The results suggested that polymers with the structure of carbazole-based donor as backbone and isoindolo[2,1-a]benzimidazol-11-one segment as acceptor could be excellent materials for memory storage and light-emitting applications with further investigation and could be used for further design of other new polymer systems.

Preparation and properties of polyimide-based nanocomposites containing functionalized Fe3O4 nanoparticles

Polyimide (PI)/Fe3O4 nanocomposites were successfully prepared via the thermal curing of different amounts of Fe3O4 nanoparticles (2, 4, 6 and 8 wt%) functionalized by 3-aminopropyltriethoxy silane as a coupling agent, containing the poly(amic acid) derived from 5-diamino- N-(4-(4,5-diphenyl-1H-imidazol)phenyl)benzamide and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride. The effect of Fe3O4 nanoparticles on the structural, thermal and magnetic properties of nanocomposites was investigated. The Fourier transform infrared spectroscopy and scanning electron microscopy (SEM) results reveal that the surface of Fe3O4 nanoparticles is sufficiently compatible with PI through linkage of the coupling agent between Fe3O4 and the polymer. Also, the SEM image shows that Fe3O4 nanoparticles are dispersed uniformly in the polymer matrix, with a particle size of around 78 nm. The nanocomposites of 2 and 8 wt% exhibit the saturation magnetization values of 0.055 and 0.170 emu g− 1, respectively. The thermogravimetric analysis data show that the thermal stability of the nanocomposites is improved as compared to the pure PI.

Colorless Semi-Alicyclic Copolyimides with High Thermal Stability and Solubility

A series of colorless copolyimide films with high thermal stability and good solubility are synthesized from (trifluoromethyl)biphenyl-4,4’-diamine (TFMB) with different 1,2,4,5-cyclohexanetetracarboxylic dianhydride (HPMDA) to 2,2-bis(3,4-dicarboxyphenyl)-hexafluoropropane (6FDA) dianhydride mole ratios through one-pot solution polycondensation. These copolyimide films exhibit excellent optical transparency (T₄₀₀ > 90% and λ₀ ~305–333 nm) with a thickness of 15 μm and good solubility in most organic solvents. The excellent optical properties are mainly attributed to the low inter- and intra-molecular charge transfer interactions due to the alicyclic structure and the strong electronegative CF₃ groups. The glass transition temperature increases from 332 to 352 °C with increasing HPMDA content in the copolymers, while the thermal decomposition temperature is improved with increasing 6FDA content. These results indicate that the copolyimide films can be successfully utilized in the development of novel heat-resistant plastic substrates for the optoelectronic engineering applications.

High-performance polyimide nanofiber membranes prepared by electrospinning

Polyimide (PI) nanofiber membranes were successfully prepared from a PI/N-methyl-2-pyrrolidone (NMP) solution via electrospinning. This technique simply and facilely produced efficient high-performance PI fibers. The morphology, surface wettability, thermal stability, mechanical properties, and filtration performance of the as-prepared PI nanofiber membranes were characterized in detail. The membranes exhibited smooth and hydrophobic surfaces. The nanofibers were well distributed in the membranes with fiber diameters in the range of 140–400 nm. All the PI nanofiber membranes showed excellent thermostability, and their initial decomposition temperature ( Td) and heat resistance temperature ( THRI) exceeded 544.4°C and 198.8°C, respectively. The PI nanofiber membranes also possessed reasonable mechanical properties with a tensile strength and a Young’s modulus reaching 10.5 and 927.6 MPa, respectively. Regarding the filtration performance, the developed nanofiber membranes achieved the best filtration efficiency of 90.4%. Such electrospun PI nanofiber membranes can be a promising candidate for hot gas filtration.

Design and synthesis of high heat-resistant, soluble, and hydrophobic fluorinated polyimides containing pyridine and trifluoromethylthiophenyl units

In this study, a novel diamine monomer, 4-(4-trifluoromethylthiophenyl)-2,6-bis(4-aminophenyl)pyridine (FTPAP) was synthesized through two-step reaction from 4-trifluoromethylthiobenzaldehyde and 4-nitroacetophenone as raw materials, and then the structure of FTPAP was characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance, and mass spectrometry. A series of fluorinated polyimides were prepared from FTPAP with five commercial dianhydrides, namely, pyromellitic dianhydride, biphenyl tetracarboxylic dianhydride, oxydiphtahalic anhydride, benzophenone tetracarboxylic dianhydride, and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride. The structure and performance of the fluorinated polymers were fully characterized by FTIR, differential scanning calorimetry, thermogravimetric analysis, and wide-angle X-ray diffraction (WAXD). The inherent viscosity of polymers ranged from 0.41 to 1.45 dL g−1. These polymers displayed good solubility in polar aprotic solvents, such as N, N-dimethylformamide, N, N-dimethylacetamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone, at room temperature or on heating. Furthermore, they exhibited outstanding thermal stability with glass transition temperatures beyond 305°C, and the temperature of 10% weight loss was in the range of 514–573°C with more than 56% residue at 800°C under nitrogen. Moreover, they showed high optical transparency with the cutoff wavelengths in the range of 385–457 nm and excellent hydrophobic property with contact angle in the range of 82.8–97.6°. In addition, the results of WAXD indicated that all of the polymers presented amorphous structure.

Synthesis of organosoluble copolyimide and preparation of fibers by dry-spinning process on a large scale

An organosoluble copolyimide (co-PI) was synthesized from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 1,4-bis-(4-aimino-2-triflupromethyl-phenoxy)-benzene ( p-6FAPB), and 2-(4-aminophenyl)-5-aminobenzimidazole (BIA) via the one-step polymerization using N-methyl-2-pyrrolidone (NMP) as the solvent, and high-performance co-PI fibers were directly prepared by the dry-spinning process on a large scale. Scanning electron microscopic images show that all formulations of as-spun fibers exhibit elliptical cross sections as well as dense morphologies. The structural evolution of the co-PI fiber induced by the high rolling speed and post-heat-drawing treatment was studied by means of thermogravimetric analysis, dynamic thermomechanical analysis, and two-dimensional wide-angle X-ray diffraction (2D WAXD). With increasing rolling speeds, glass transition temperatures ( Tgs) and thermal stabilities of as-spun fibers slightly decrease, which may be resulted from the disentanglement of entangled molecular chains under the large deformation and high-temperature heating atmosphere in the spinning column. 2D WAXD data indicate that both increasing rolling speeds and post-heat-drawing treatment are beneficial for getting a highly ordered structure along the meridian direction of the fibers. The fibers treated at 430°C exhibit outstanding mechanical properties, and the tensile strength and modulus reach 1.44 GPa and 48.69 GPa, respectively, at a drawing ratio of 2.8.

Synthesis and Characterization of Organosoluble, Thermal Stable and Hydrophobic Polyimides Derived from 4-(4-(1-pyrrolidinyl)phenyl)-2,6-bis(4-(4-aminophenoxy)phenyl)pyridine

A novel aromatic diamine monomer, 4-(4-(1-pyrrolidinyl)phenyl)-2,6-bis(4-(4-aminophenoxy)phenyl)pyridine (PPAPP) containing pyridine rings, pyrrolidine groups, and ether linkages, was successfully synthesized using 4-hydroxyacetophenone and 1-chloro-4-nitrobenzene as starting materials by three-step reactions, and then used to synthesize a series of polyimides by polycondensation with various aromatic dianhydrides via a two-step method. The structure of PPAPP was characterized by NMR, FT-IR, and mass spectrometry analysis methods. These polymers showed good solubility in common organic solvents (e.g., NMP, DMF, DMSO, and DMAc) at room temperature or on heating. Moreover, they presented a high thermal stability with the glass transition temperature (Tgs) exceeding 316 °C, as well as the temperature of 10% weight loss ranged from 552⁻580 °C with more than 67% residue at 800 °C under nitrogen. Furthermore, they also exhibited excellent hydrophobicity with a contact angle in the range of 85.6°⁻97.7°, and the results of Wide-Angle X-ray Diffraction (WAXD) indicated that all of the polymers revealed an amorphous structure.

Colorless polyimides derived from 2R,5R,7S,10S-naphthanetetracarboxylic dianhydride

Colorless polyimides with excellent thermal and mechanical properties were developed from 2R,5R,7S,10S-naphthanetetracarboxylic dianhydride, and their properties were systematically compared with those based on 1S,2R,4S,5R-cyclohexanetetracarboxylic dianhydride.

Synthesis and properties of fluorinated polyimides with multi-bulky pendant groups

A new family of fluorinated polyimides with four pendant trifluoromethylphenyl groups was prepared. The incorporation of multi-bulky pendant fluorinated groups and large noncoplanar structures brought about great improvement for their properties.

Synthesis and characterization of novel polyimides derived from 4,4'-bis(5-amino-2-pyridinoxy)benzophenone: effect of pyridine and ketone units in the main

A diamine monomer, 4,4’-bis(5-amino-2-pyridinoxy)benzophenone, was designed and synthesized, and used to react with commercially different kinds of aromatic dianhydrides to prepare a series of polyimides containing pyridine and ketone units via the classical two-step procedure. Glass transition temperatures (T_g) of the resultant polyimides PI-(1–5) derived from 4,4’-bis(5-amino-2-pyridinoxy) benzophenone with various dianhydrides ranged from 201 to 310 °C measured by differential scanning calorimetry. The temperatures for 5%wt loss of the resultant polyimides in nitrogen atmosphere obtained from the thermogravimetric analysis curves fell in the range of 472–501 °C. The temperatures for 10%wt loss of the resultant polyimides in nitrogen atmosphere fell in the range of 491–537 °C. Meanwhile, the char yields at 800 °C were in the range of 55.3–60.8%. Moreover, the moisture absorption of polyimide films was measured in the range of 0.37–2.09%. The thin films showed outstanding mechanical properties with tensile strengths of 103–145 MPa, an elongation at break of 12.9–15.2%, and a tensile modulus of 1.20–1.88 Gpa, respectively. The coefficients of thermal expansion of the resultant polyimides were obtained among 26–62 ppm °C⁻¹. To sum up, this series of polyimides had a good combination of properties applied for high-performance materials and showed promising potential applications in the fields of optoelectronic devices.

Design and synthesis of hyperbranched polyimide containing multi-triphenylamine moieties for memory devices

A hyperbranched polyimide (HBPI) was synthesized from a designed triamine monomer and the HBPI based memory device presented SRAM (static random access memory) behavior with a low switch voltage and high ON/OFF current ratio.