Hierarchical porous structures in cellulose: NMR relaxometry approach

A fast and effective way to measure the inner pore size distributions of wetted cotton fibers and their pretreatment performance using time-domain nuclear magnetic resonance

This study reports the findings from using time-domain nuclear magnetic resonance (TD-NMR) to analyze the pore structures of cotton fibers. Cotton fibers, which swell and soften in water, present challenges for conventional pore measurement techniques. TD-NMR overcomes these by measuring the transverse relaxation time (T2) of water protons within the fibers, indicative of internal pore sizes. We established a T2-to-pore size conversion equation using mixed cellulose ester membranes. This enabled differentiation between strongly bound, loosely bound, and free water within the fibers, and detailed the water distribution. A method for measuring the pore size distribution of wet cotton fiber was developed using TD-NMR. We then examined how various pretreatments affect the fibers' internal pores by comparing their pore size distribution and porosity. Specifically, caustic mercerization primarily enlarges the porosity and size of larger pores, while liquid ammonia treatment increases porosity but reduces the size of smaller pores. This research confirms TD-NMR's utility in assessing cotton fabrics' wet processing performance.

Low-field, not low quality: 1D simplification, selective detection, and heteronuclear 2D experiments for improving low-field NMR spectroscopy of environmental and biological samples

Understanding environmental change is challenging and requires molecular-level tools to explain the physicochemical phenomena behind complex processes. Nuclear magnetic resonance (NMR) spectroscopy is a key tool that provides information on both molecular structures and interactions but is underutilized in environmental research because standard "high-field" NMR is financially and physically inaccessible for many and can be overwhelming to those outside of disciplines that routinely use NMR. "Low-field" NMR is an accessible alternative but has reduced sensitivity and increased spectral overlap, which is especially problematic for natural, heterogeneous samples. Therefore, the goal of this study is to investigate and apply innovative experiments that could minimize these challenges and improve low-field NMR analysis of environmental and biological samples. Spectral simplification (JRES, PSYCHE, singlet-only, multiple quantum filters), selective detection (GEMSTONE, DREAMTIME), and heteronuclear (reverse and CH3/CH2/CH-only HSQCs) NMR experiments are tested on samples of increasing complexity (amino acids, spruce resin, and intact water fleas) at-high field (500 MHz) and at low-field (80 MHz). A novel experiment called Doubly Selective HSQC is also introduced, wherein 1H signals are selectively detected based on the 1H and 13C chemical shifts of 1H-13C J-coupled pairs. The most promising approaches identified are the selective techniques (namely for monitoring), and the reverse and CH3-only HSQCs. Findings ultimately demonstrate that low-field NMR holds great potential for biological and environmental research. The multitude of NMR experiments available makes NMR tailorable to nearly any research need, and low-field NMR is therefore anticipated to become a valuable and widely used analytical tool moving forward.

Hydrolysis of lignocellulose to succinic acid: a review of treatment methods and succinic acid applications

Succinic acid (SA) is an intermediate product of the tricarboxylic acid cycle (TCA) and is one of the most significant platform chemicals for the production of various derivatives with high added value. Due to the depletion of fossil raw materials and the demand for eco-friendly energy sources, SA biosynthesis from renewable energy sources is gaining attention for its environmental friendliness. This review comprehensively analyzes strategies for the bioconversion of lignocellulose to SA based on the lignocellulose pretreatment processes and cellulose hydrolysis and fermentation principles and highlights the research progress on acid production and SA utilization under different microbial culture conditions. In addition, the fermentation efficiency of different microbial strains for the production of SA and the main challenges were analyzed. The future application directions of SA derivatives were pointed out. It is expected that this research will provide a reference for the optimization of SA production from lignocellulose.

Topochemical Engineering of Cellulose-Carboxymethyl Cellulose Beads: A Low-Field NMR Relaxometry Study

The demand for more ecological, highly engineered hydrogel beads is driven by a multitude of applications such as enzyme immobilization, tissue engineering and superabsorbent materials. Despite great interest in hydrogel fabrication and utilization, the interaction of hydrogels with water is not fully understood. In this work, NMR relaxometry experiments were performed to study bead-water interactions, by probing the changes in bead morphology and surface energy resulting from the incorporation of carboxymethyl cellulose (CMC) into a cellulose matrix. The results show that CMC improves the swelling capacity of the beads, from 1.99 to 17.49, for pure cellulose beads and beads prepared with 30% CMC, respectively. Changes in water mobility and interaction energy were evaluated by NMR relaxometry. Our findings indicate a 2-fold effect arising from the CMC incorporation: bead/water interactions were enhanced by the addition of CMC, with minor additions having a greater effect on the surface energy parameter. At the same time, bead swelling was recorded, leading to a reduction in surface-bound water, enhancing water mobility inside the hydrogels. These findings suggest that topochemical engineering by adjusting the carboxymethyl cellulose content allows the tuning of water mobility and porosity in hybrid beads and potentially opens up new areas of application for this biomaterial.

Development and Performance of Bioactive Compounds-Loaded Cellulose/Collagen/Polyurethane Materials

Here we present a new biomaterial based on cellulose, collagen and polyurethane, obtained by dissolving in butyl imidazole chloride. This material served as a matrix for the incorporation of tannin and lipoic acid, as well as bioactive substances with antioxidant properties. The introduction of these bioactive principles into the base matrix led to an increase of the compressive strength in the range 105-139 kPa. An increase of 29.85% of the mucoadhesiveness of the film containing tannin, as compared to the reference, prolongs the bioavailability of the active substance; a fact also demonstrated by the controlled release studies. The presence of bioactive principles, as well as tannins and lipoic acid, gives biomaterials an antioxidant capacity on average 40%-50% higher compared to the base matrix. The results of the tests of the mechanical resistance, mucoadhesiveness, bioadhesiveness, water absorption and antioxidant capacity of active principles recommend these biomaterials for the manufacture of cosmetic masks or patches.

Solid-state NMR studies of solvent-mediated, acid-catalyzed woody biomass pre-treatment for enzymatic conversion of residual cellulose

Enzymes selectively hydrolyze the carbohydrate fractions of lignocellulosic biomass into corresponding sugars, but these processes are limited by low yields and slow catalytic turnovers. Under certain conditions, the rates and yields of enzymatic sugar production can be increased by pretreating biomass using solvents, heat and dilute acid catalysts. However, the mechanistic details underlying this behavior are not fully elucidated, and designing effective pretreatment strategies remains an empirical challenge. Herein, using a combination of solid-state and high-resolution magic-angle-spinning NMR, infrared spectroscopy and X-ray diffractometry, we show that the extent to which cellulase enzymes are able to hydrolyze solvent-pretreated biomass can be understood in terms of the ability of the solvent to break the chemical linkages between cellulose and non-cellulosic materials in the cell wall. This finding is of general significance to enzymatic biomass conversion research, and implications for designing improved biomass conversion strategies are discussed. These findings demonstrate the utility of solid-state NMR as a tool to elucidate the key chemical and physical changes that occur during the liquid-phase conversion of real biomass.

Synthesis and application of sugarcane bagasse cellulose mixed esters. Part II: Removal of Co2+ and Ni2+ from single spiked aqueous solutions in batch and continuous mode

Sugarcane bagasse cellulose succinate trimellitate (SBST) was prepared by a one-pot synthesis method. The synthesis of this novel mixed ester was investigated by a 2³-factorial design. The parameters investigated were time, temperature, and succinic anhydride mole fraction (χ_SA). The responses evaluated were the adsorption capacity (q_Co2+ and q_Ni2+), weight gain (wg), and number of carboxylic acid groups (n_T,COOH). ¹³C Multiple Cross-Polarization solid-state NMR spectroscopy, ¹H NMR relaxometry, and Fourier-transform infrared spectroscopy were used to elucidate the SBST structure. The best SBST reaction conditions were 100 °C, 660 min, and χ_SA of 0.2, which yielded SBST with a wg of 57.1%, n_T,COOH of 4.48 mmol g^-1, and q_Co2+ and q_Ni2+ of 0.900 and 0.963 mmol g^-1, respectively. The maximum adsorption capacities (Q_max) (pH 5.75, 25 °C) estimated by the Redlich-Peterson model for Co²⁺ and Ni²⁺ were 1.16 and 1.29 mmol g^-1. The Δ_adsH° values for Co²⁺ and Ni²⁺ adsorption obtained by isothermal titration calorimetry were 8.03 and 6.94 kJ mol^-1. Regeneration and reuse of SBST were investigated and the best conditions applied for fixed-bed column adsorption in five consecutive cycles. SBST was fully desorbed and Q_max values for Co²⁺ (0.95 mmol g^-1) and Ni²⁺ (1.02 mmol g^-1) were estimated using the Bohart-Adams model.

NMR Relaxometry and IR Thermography to Study Ancient Cotton Paper Bookbinding

Defects related to degradation were observed in an ancient book paperboard cover through nuclear magnetic resonance relaxometry and infrared thermography. Data collected with this combined method allowed identifying areas with moisture content and thermal diffusivity anomalies within the front board, corresponding to the different conservation status of the cellulose-based material. Non-destructive testing analytical procedures provide comprehensive knowledge for preserving precious library archives.

Mechanically robust cationic cellulose nanofibril 3D scaffolds with tuneable biomimetic porosity for cell culture

Robust 3D modified cellulose scaffolds, with exquisite tuneable structure, in the form of foams, with meso and macro scale pores were prepared by a “bottom-up” approach.

Hemocyanin facilitates lignocellulose digestion by wood-boring marine crustaceans

Woody (lignocellulosic) plant biomass is an abundant renewable feedstock, rich in polysaccharides that are bound into an insoluble fiber composite with lignin. Marine crustacean woodborers of the genus Limnoria are among the few animals that can survive on a diet of this recalcitrant material without relying on gut resident microbiota. Analysis of fecal pellets revealed that Limnoria targets hexose-containing polysaccharides (mainly cellulose, and also glucomannans), corresponding with the abundance of cellulases in their digestive system, but xylans and lignin are largely unconsumed. We show that the limnoriid respiratory protein, hemocyanin, is abundant in the hindgut where wood is digested, that incubation of wood with hemocyanin markedly enhances its digestibility by cellulases, and that it modifies lignin. We propose that this activity of hemocyanins is instrumental to the ability of Limnoria to feed on wood in the absence of gut symbionts. These findings may hold potential for innovations in lignocellulose biorefining.

The role of water in the degradation process of paper using 1H HR-MAS NMR spectroscopy

The thermodynamic properties of water are essential for determining the corresponding properties of every biosystem it interacts with. Indeed, the comprehension of hydration mechanisms is fundamental for the understanding and the control of paper degradation pathways induced by natural or artificial aging. In fact, the interactions between water and cellulose at the accessible sites within the fibres' complex structure are responsible for the rupture of hydrogen bonds and the consequent swelling of the cellulose fibres and consumption of the amorphous regions. In this paper we study the hydration process of cellulose in naturally and artificially aged paper samples by measuring the proton spin-lattice (T₁) and spin-spin (T₂) relaxation times of the macroscopic magnetization through nuclear magnetic resonance (NMR) experiments. The observed behaviour of T₁ and T₂ is quite complex and strictly dependent on the water content of paper samples. This has been interpreted as due to the occurrence of different mechanisms regulating the water-cellulose interaction within the fibres. Furthermore, we have measured T₁ as a function of the artificial aging time comparing the results with those measured on three paper samples dated back to the 15th century. We found that the evolution of T₁ in model papers artificially aged is correlated with that of ancient paper, providing therefore a way for estimating the degradation of cellulosic materials in terms of an equivalent time of artificial aging. These results provide fundamental information for industrial applications and for the preservation and restoration of cultural heritage materials based on cellulose such as ancient paper or textiles.

Dynamical assessment of fluorescent probes mobility in poplar cell walls reveals nanopores govern saccharification

BACKGROUND

Improving lignocellulolytic enzymes' diffusion and accessibility to their substrate in the plant cell walls is recognised as a critical issue for optimising saccharification. Although many chemical features are considered as detrimental to saccharification, enzymes' dynamics within the cell walls remains poorly explored and understood. To address this issue, poplar fragments were submitted to hot water and ionic liquid pretreatments selected for their contrasted effects on both the structure and composition of lignocellulose. In addition to chemical composition and porosity analyses, the diffusion of polyethylene glycol probes of different sizes was measured at three different time points during the saccharification.

RESULTS

Probes' diffusion was mainly affected by probes size and pretreatments but only slightly by saccharification time. This means that, despite the removal of polysaccharides during saccharification, diffusion of probes was not improved since they became hindered by changes in lignin conformation, whose relative amount increased over time. Porosity measurements showed that probes' diffusion was highly correlated with the amount of pores having a diameter at least five times the size of the probes. Testing the relationship with saccharification demonstrated that accessibility of 1.3-1.7-nm radius probes measured by FRAP on non-hydrolysed samples was highly correlated with poplar digestibility together with the measurement of initial porosity on the range 5-20 nm.

CONCLUSION

Mobility measurements performed before hydrolysis can serve to explain and even predict saccharification with accuracy. The discrepancy observed between probes' size and pores' diameters to explain accessibility is likely due to biomass features such as lignin content and composition that prevent probes' diffusion through non-specific interactions probably leading to pores' entanglements.

On the subtle tuneability of cellulose hydrogels: implications for binding of biomolecules demonstrated for CBM 1

Choice of molecular probe for determining porosity, surface area, or binding in never-dried cellulose hydrogels is critical to discern differences in structure.