Effect of graphene oxide (GO) on Poly(vinylidene fluoride-hexafluoropropylene) (PVDF- HFP) polymer electrolyte membrane

Designing Compatible Ceramic/Polymer Composite Solid-State Electrolyte for Stable Silicon Nanosheet Anodes

The commercialization of silicon anode for lithium-ion batteries has been hindered by severe structure fracture and continuous interfacial reaction against liquid electrolytes, which can be mitigated by solid-state electrolytes. However, rigid ceramic electrolyte suffers from large electrolyte/electrode interfacial resistance, and polymer electrolyte undergoes poor ionic conductivity, both of which are worsened by volume expansion of silicon. Herein, by dispersing Li1.3Al0.3Ti1.7(PO4)3 (LATP) into poly(vinylidene fluoride)-hexafluoropropylene (PVDF-HFP) and poly(ethylene oxide) (PEO) matrix, the PVDF-HFP/PEO/LATP (PHP-L) solid-state electrolyte with high ionic conductivity (1.40 × 10-3 S cm-1), high tensile strength and flexibility is designed, achieving brilliant compatibility with silicon nanosheets. The chemical interactions between PVDF-HFP and PEO, LATP increase amorphous degree of polymer, accelerating Li+ transfer. Good flexibility of the PHP-L contributes to adaptive structure variation of electrolyte with silicon expansion/shrinkage, ensuring swift interfacial ions transfer. Moreover, the solid membrane with high tensile limits electrode structural degradation and eliminates continuous interfacial growth to form stable 2D solid electrolyte interface (SEI) film, achieving superior cyclic performance to liquid electrolytes. The Si//PHP-L15//LiFePO4 solid-state full-cell exhibits stable lithium storage with 81% capacity retention after 100 cycles. This work demonstrates the effectiveness of composite solid electrolyte in addressing fundamental interfacial and performance challenges of silicon anodes.

Performance investigation of poly(vinylidene fluoride-cohexafluoropropylene) membranes containing SiO2 nanoparticles in a newly designed single vacuum membrane distillation system

The current study focuses on the development of a superhydrophobic poly(vinylidene fluoride-cohexafluoropropylene) nanocomposite membrane suitable for vacuum membrane distillation by incorporating SiO2 nanoparticles. At loading hydrophobic nano-SiO2 particle concentration (0.50-1.50 wt.%), the developed nanocomposite membranes are optimized in terms of vacuum membrane distillation performance. The influence of temperature, vacuum pressure, and feed water flow is studied for desalinating high-salinity brine. The results show that the developed vacuum distillation membrane is capable of 95% salt rejection during the treatment of a highly saline feed (65,000 ppm) at fixed flow rates of 120 L/h saline feed and different operating conditions consisting of feed inlet temperatures ranging from 40°C to 70°C and distillate inlet temperatures of 7-15°C. The vacuum membrane distillation process achieves 0.38-1.66% water recovery with increasing concentration factor, meaning that recovery is increased, and shows a specific electrical energy consumption of 5.16-23.90 kWh/m3 for product water. Overall, the newly designed membrane demonstrates suitability for a vacuum membrane distillation system. PRACTITIONER POINTS: Desalinate high-salinity brine (TDS > 35,000 ppm) using a vacuum membrane distillation system. A hydrophobic PVDF-HFP/SiO2 nanocomposite membrane development for vacuum membrane distillation. A newly designed single vacuum membrane distillation system for RO brine treatment.

Self-Cleaning and Spectral Selective Membrane for Sustainable Radiative Cooling

Radiative cooling materials have attracted great attention due to their superiority in energy-free cooling, especially for outdoor applications. However, outdoor cooling performance is threatened by surface pollution. Herein, we demonstrate a ternary compound system, including polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP), boron nitride nanosheets (BNNS), and hydrophobic silicon dioxide (SiO2), to synchronously achieve self-cooling and self-cleaning properties through biomimetically building a lotus-like papillomatous structure. The optimized membrane has a high infrared emissivity of 0.93, a sunlight reflectivity of 97.2%, and a water contact angle of 150.5°and not only efficiently cools the object to a suitable temperature but also protects the membrane from polluting and keeps cooling for a long time. The result shows that the membrane can cool a nonfebrile object by 30.5 and 1.7 °C for noon and night, respectively, and the noon and night-time temperature drops are 10.8 and 13.5 °C for the self-heating object, compared to the bare state. Meanwhile, the membrane always keeps self-cleaning if slurry is splashed onto its surface or it is exposed to slurry. Importantly, the integration of superhydrophobic and radiative cooling properties ensures that the membrane has permanent cooling performance by protecting it from being contaminated, which is significant for outdoor applications.

Synthesis and Characterization of Core-Double-Shell-Structured PVDF-grafted-BaTiO3/P(VDF-co-HFP) Nanocomposite Films

Core-double-shell-structured nanocomposite films consisting of polyvinylidene fluoride-grafted-barium titanate (PVDF-g-BT) incorporated into a P(VDF-co-hexafluoropropylene (HFP)) copolymer matrix were produced via a solution mixing method for energy storage applications. The resulting films were thoroughly investigated via spectroscopic, thermal, and morphological analyses. Thermogravimetric data provided an enhancement of the thermal stability, while differential scanning calorimetry indicated an increase in the crystallinity of the films after the addition of PVDF-g-BT. Moreover, broadband dielectric spectroscopy revealed three dielectric processes, namely, glass-rubber relaxation (α_a), relaxation associated with the polymer crystalline phase (α_c), and slower relaxation in the nanocomposites resulting from the accumulation of charge on the interface between the PVDF-g-BT filler and the P(VDF-co-HFP) matrix. The dependence of the dielectric constant from the composition was analyzed, and we found that the highest permittivity enhancement was obtained by the highest concentration filler added to the largest concentration of P(VDF-co-HFP). Mechanical analysis revealed an improvement in Young's modulus for all nanocomposites versus pristine P(VDF-co-HFP), confirming the uniformity of the distribution of the PVDF-g-BT nanocomposite with a strong interaction with the copolymer matrix, as also evidenced via scanning electron microscopy. The suggested system is promising for use in high-energy-density storage devices as supercapacitors.

Using Pegylated Graphene Oxide to Achieve High Performance Solid Polymer Electrolyte Based on Poly(ethylene oxide)/Polyvinyl Alcohol Blend (PEO/PVA)

Solid polymer electrolytes (SPEs) have emerged as a promising avenue for developing flexible lithium-ion batteries. However, the low ionic conductivity of polymers remains a primary challenge that has been the subject of intensive research efforts in recent years. In this work, polyethylene oxide (PEO), polyvinyl alcohol, lithium perchlorate (LiClO₄), and graphene functionalized with polyethylene glycol (FGO) have been used to prepare SPE/FGO electrolytes by casting solution technique. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) confirmed the reduction of SPE crystals and the increase of amorphous phases. The results demonstrated that the presence of functionalized graphene had an effective role in reducing crystallinity. Furthermore, the thermal and mechanical stability of the samples were corroborated through thermogravimetric analysis (TGA) and tensile tests, respectively. Notably, the samples exhibited adequate ionic conductivity at room temperature, with the highest ionic conductivity of 5.2 × 10^-5 S·cm^-1 observed for 2%wt of FGO in SPE (SPE/FGO(2)).

Assessment of graphene-based polymers for sustainable wastewater treatment: Development of a soft computing approach

Since graphene possesses distinct electrical and material properties that could improve material performance, there is currently a growing demand for graphene-based electronics and applications. Numerous potential applications for graphene include lightweight and high-strength polymeric composite materials. Due to its structural qualities, which include low thickness and compact 2D dimensions, it has also been recognized as a promising nanomaterial for water-barrier applications. For barrier polymer applications, it is usually applied using two main strategies. The first is the application of graphene, graphene oxide (GO), and reduced graphene oxide (rGO) to polymeric substrates through transfer or coating. In the second method, fully exfoliated GO or rGO is integrated into the material. This study provides an overview of the most recent findings from research on the use of graphene in the context of water-barrier applications. The advantages and current limits of graphene-based composites are compared with those of other nanomaterials utilized for barrier purposes in order to emphasize difficult challenges for future study and prospective applications.

Electrospun Co Nanoparticles@PVDF-HFP Nanofibers as Efficient Catalyst for Dehydrogenation of Sodium Borohydride

Metallic Co NPs@poly(vinylidene fluoride-co- hexafluoropropylene) nanofibers (PVFH NFs) were successfully synthesized with the help of electrospinning and in situ reduction of Co²⁺ ions onto the surface of PVFH membrane. Synthesis of PVFH NFs containing 10, 20, 30, and 40 wt% of cobalt acetate tetrahydrate was achieved. Physiochemical techniques were used to confirm the formation of metallic Co@PVFH NFs. High catalytic activity of Co@PVFH NFs in the dehydrogenation sodium borohydride (SBH) was demonstrated. The formulation with 40 wt% Co proved to have the greatest performance in comparison to the others. Using 1 mmol of SBH and 100 mg of Co@PVFH NFs, 110 mL of H₂ was produced in 19 min at a temperature of 25 °C, but only 56, 73, and 89 mL were produced using 10, 20, and 30 wt% Co, respectively. With the rise of catalyst concentration and reaction temperature, the amount of hydrogen generated increased. By raising the temperature from 25 to 55 °C, the activation energy was lowered to be 35.21 kJ mol^-1 and the yield of H₂ generation was raised to 100% in only 6 min. The kinetic study demonstrated that the reaction was pseudo-first order in terms of the amount of catalyst utilized and pseudo-zero order in terms of the SBH concentration. In addition, after six cycles of hydrolysis, the catalyst showed outstanding stability. The suggested catalyst has potential applications in H₂ generation through hydrolysis of sodium borohydride due to its high catalytic activity and flexibility of recycling.

Fluoropolymer Membranes for Membrane Distillation and Membrane Crystallization

Fluoropolymer membranes are applied in membrane operations such as membrane distillation and membrane crystallization where hydrophobic porous membranes act as a physical barrier separating two phases. Due to their hydrophobic nature, only gaseous molecules are allowed to pass through the membrane and are collected on the permeate side, while the aqueous solution cannot penetrate. However, these two processes suffer problems such as membrane wetting, fouling or scaling. Membrane wetting is a common and undesired phenomenon, which is caused by the loss of hydrophobicity of the porous membrane employed. This greatly affects the mass transfer efficiency and separation efficiency. Simultaneously, membrane fouling occurs, along with membrane wetting and scaling, which greatly reduces the lifespan of the membranes. Therefore, strategies to improve the hydrophobicity of membranes have been widely investigated by researchers. In this direction, hydrophobic fluoropolymer membrane materials are employed more and more for membrane distillation and membrane crystallization thanks to their high chemical and thermal resistance. This paper summarizes different preparation methods of these fluoropolymer membrane, such as non-solvent-induced phase separation (NIPS), thermally-induced phase separation (TIPS), vapor-induced phase separation (VIPS), etc. Hydrophobic modification methods, including surface coating, surface grafting and blending, etc., are also introduced. Moreover, the research advances on the application of less toxic solvents for preparing these membranes are herein reviewed. This review aims to provide guidance to researchers for their future membrane development in membrane distillation and membrane crystallization, using fluoropolymer materials.

Effect of Graphene Oxide on the Properties of Polymer Inclusion Membranes for Gold Extraction from Acidic Solution

The cyanidation leaching method is hazardous to the environment, but it is widely applied in the gold mining process because it is effective for gold extraction. This study fabricates polymer inclusion membranes (PIMs), which have environment-friendly properties, with graphene oxide (GO) as an alternative to the cyanidation leaching method for gold extraction. Poly(vinylidenefluoride-co-hexa-fluoropropylene)-based PIMs with different GO concentrations in five membranes (i.e., M1 (0 wt.%), M2 (0.5 wt.%), M3 (1.0 wt.%), M4 (1.5 wt.%), and M5 (2.0 wt.%)) are studied for their potential to extract gold from a hydrochloric acid solution. The membranes are prepared using di-(2-ethylhexyl) phosphoric acid as the extractant and dioctyl phthalate as the plasticizer. Scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, ion exchange capacity, and water uptake are used to characterize the physical and chemical properties of the fabricated PIMs. The results show that the optimized membrane for gold extraction is M4 (1.5 wt.% GO), which yields a better performance on thermal stability, ion exchange capacity (IEC), and water uptake. M4 (1.5 wt.% GO) also exhibits a smooth and dense structure, with the maximum extraction efficiency obtained at 84.71% of extracted gold. In conclusion, PIMs can be used as an alternative for extracting gold with a better performance by the presence of 1.5 wt.% GO in membrane composition.

Eu3+-Doped Electrospun Polyvinylidene Fluoride-Hexafluoropropylene/Graphene Oxide Multilayer Composite Nanofiber for the Fabrication of Flexible Pressure Sensors

The development of flexible materials with higher piezoelectric properties and electrostrictive response is of great significance in many applications such as wearable functional devices, flexible sensors, and actuators. In this study, we report an efficient fabrication strategy to construct a highly sensitive (0.72 kPa^-1), red light-emitting flexible pressure sensor using electrospun Eu³⁺-doped polyvinylidene fluoride-hexafluoropropylene/graphene oxide composite nanofibers using a layer-by-layer technology. The high β-phase concentration (96.3%) was achieved from the Eu³⁺-doped P(VDF-HFP)/GO nanofibers, leading to a high piezoelectricity of the composite nanofibers. We observed that a pressure sensor is enabled to generate an output voltage of 4.5 V. Furthermore, Eu³⁺-doped P(VDF-HFP)/GO composite nanofiber-based pressure sensors can also be used as an actuator as it has a good electrostrictive effect. At the same time, the nanofiber membrane has excellent ferroelectric properties and good fluorescence properties. These results indicate that this material has great application potential in the fields of photoluminescent fabrics, flexible sensors, soft actuators, and energy storage devices.

High-Performance Poly(vinylidene fluoride-hexafluoropropylene)-Based Composite Electrolytes with Excellent Interfacial Compatibility for Room-Temperature All-Solid-State Lithium Metal Batteries

Composite solid-state electrolytes (CSEs) have been developed rapidly in recent years owing to their high electrochemical stability, low cost, and easy processing characteristics. Most CSEs, however, require high temperatures or flammable liquid solvents to exhibit their acceptable electrochemical performance. Room-temperature all-solid-state batteries without liquid electrolytes are still unsatisfactory and under development. Herein, we have prepared a composite solid electrolyte with excellent performance using a polymer electrolyte poly(vinylidene fluoride-hexafluoropropylene) and an inorganic electrolyte Li_6.4La₃Zr_1.4Ta_0.6O₁₂. With the assistance of lithium salts and plasticizers, the prepared CSE achieves a high ionic conductivity of 4.05 × 10^-4 S·cm^-1 at room temperature. The Li/CSE/Li symmetric cell can be stably cycled for more than 1000 h at 0.1 mA/cm² without short circuits. The all-solid-state lithium metal battery using a LiFePO₄ cathode displays a high discharge capacity of 148.1 mAh·g^-1 and a capacity retention of 90.21% after 100 cycles. Moreover, the high electrochemical window up to 4.7 V of the CSE makes it suitable for high-voltage service environments. The all-solid-state battery using a lithium nickel-manganate cathode shows a high discharge specific capacity of 197.85 mAh·g^-1 with good cycle performance. This work might guide the improvement of future CSEs and the exploration of flexible all-solid-state lithium metal batteries.

Porosity Tunable Poly(Lactic Acid)-Based Composite Gel Polymer Electrolyte with High Electrolyte Uptake for Quasi-Solid-State Supercapacitors

The growing popularity of quasi-solid-state supercapacitors inevitably leads to the unrestricted consumption of commonly used petroleum-derived polymer electrolytes, causing excessive carbon emissions and resulting in global warming. Also, the porosity and liquid electrolyte uptake of existing polymer membranes are insufficient for well-performed supercapacitors under high current and long cycles. To address these issues, poly(lactic acid) (PLA), a widely applied polymers in biodegradable plastics is employed to fabricate a renewable biocomposite membrane with tunable pores with the help of non-solvent phase inversion method, and a small amount of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is introduced as a modifier to interconnect with PLA skeleton for stabilizing the porous structure and optimizing the aperture of the membrane. Owing to easy film-forming and tunable non-solvent ratio, the porous membrane possesses high porosity (ca. 71%), liquid electrolyte uptake (366%), and preferable flexibility endowing the GPE with satisfactory electrochemical stability in coin and flexible supercapacitors after long cycles. This work effectively relieves the environmental stress resulted from undegradable polymers and reveals the promising potential and prospects of the environmentally friendly membrane in the application of wearable devices.

Lithium Nafion-Modified Li6.05Ga0.25La3Zr2O11.8F0.2 Trilayer Hybrid Solid Electrolyte for High-Voltage Cathodes in All-Solid-State Lithium-Metal Batteries

All-solid-state batteries containing ceramic-polymer solid electrolytes are possible alternatives to lithium-metal batteries containing liquid electrolytes in terms of their safety, energy storage, and stability at elevated temperatures. In this study we prepared a garnet-type Li_6.05Ga_0.25La₃Zr₂O_11.8F_0.2 (LGLZOF) solid electrolyte modified with lithium Nafion (LiNf) and incorporated it into poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) matrixes. We used a solution-casting method to obtain bilayer (Bi-HSE) and trilayer (Tri-HSE) hybrid solid electrolytes. A layer of functionalized multiwalled carbon nanotubes (f-MWCNTs) coated with LiNf (LiNf@f-MWCNT) in the Tri-HSE led to good compatibility with the polymer slurry and adhered well to the Li anode, thereby improving the interfacial contact at the electrode-solid electrolyte interface and suppressing dendrite growth. The Tri-HSE membrane displayed high ionic conductivity (5.6 × 10^-4 S cm^-1 at 30 °C), a superior Li⁺ transference number (0.87), and a wide electrochemical window (0-5.0 V vs Li/Li⁺). In addition, Li symmetrical cells incorporating this hybrid electrolyte possessed excellent interfacial stability over 600 h at 0.1 mA cm^-2 and a high critical current density (1.5 mA cm^-2). Solid-state lithium batteries having the structure LiNf@LiNi_0.8Co_0.1Mn_0.1O₂/Tri-HSE/Li delivered excellent room-temperature stable cycling performance at 0.5C, with a capacity retention of 85.1% after 450 cycles.

Electrospinning SA@PVDF-HFP Core-Shell Nanofibers Based on a Visual Light Transmission Response to Alcohol for Intelligent Packaging

A naked-eye detector based on a rapid transmittance response to alcohol was designed to offer real-time and reusable detection of fruit freshness. To ensure the hydrophobicity of the fibrous membrane and high light transmission response to alcohol, fluorine-rich poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) with a low refractive index was selected as the shell layer, while sodium alginate (SA) and polyvinyl alcohol (PVA) were selected as the core layer for coaxial electrospinning. The core-shell fibrous detector was obtained by treatment with CaCl₂ to form a stable hydrogel and by water flushing to remove PVA. The interior structure of the fiber and its evolution were investigated with increasing SA concentration, which changed from a nonconcentric structure to a core-shell structure. Without SA, nonconcentric structured fibers were obtained due to high flowability and incompatibility between the organic solvent phase of PVDF-HFP and the aqueous phase of PVA. As the SA concentration increased, the enhanced viscosity and surface tension decreased the asymmetric mobility significantly, which competed with the charge attractive forces from the Taylor cone surface, leading to a core-shell structure. The as-spun membranes were opaque due to light scattering at the interface between air and fiber and became light transparent after immersion in a rotten fruit-containing alcohol and acetic acid due to a decreased light loss. The rapidly responsive, reusable fibrous membranes with over 90% light transparency developed here have high potential for application in visual intelligent packaging to monitor the freshness of fruits and vegetables.

Efficient Improvement of Lithium Ionic Conductivity for Polymer Electrolyte via Introducing porous Metal–Organic Frameworks

Electrolyte membrane plays a vital role in the practical conduction application of lithium-ion batteries. In this study, a series of PVDF-HFP/MOF-5 composite electrolyte materials were harvested by incorporating MOF-5 into...

Quasi-solid-state lithium-tellurium batteries based on flexible gel polymer electrolytes

A quasi-solid-state Li-Te battery is developed by using a flexible gel polymer electrolyte (GPE), porous carbon/tellurium cathode, and lithium metal anode. The ionic conductivity of GPE is controllable and reaches up to 8.0 × 10^-4 S cm^-1 at 25 °C. The good interfacial contact with Li metal ensures excellent cycling stability in Li/GPE/Li symmetric cells. Moreover, it is found that, compared to S and Se counterparts, the Li-Te battery exhibits good rate capability due to the high electrical conductivity of Te and excellent interfacial stability among GPE, Li, and Te. This work provides several facile strategies to develop safe and high-performance solid-state Li-Te batteries.

High Li-Ion Conductivity Artificial Interface Enabled by Li-Grafted Graphene Oxide for Stable Li Metal Pouch Cell

The fragile electrolyte/Li interface is responsible for the long-lasting consumption of Li resources and fast failure of Li metal batteries. The polymer artificial interface with high mechanical flexibility is a promising candidate to maintain the stability of the electrolyte/Li interface; however, sluggish Li-ion transportation of the conventional polymer interface hinders the application. In this work, Li-functionalized graphene oxide (GO-ADP-Li₃), which is synthesized by covalent grafting of adenosine 5'-diphosphate lithium on GO nanosheets, is used as a functional additive to improve the Li-ion conductivity of the polymer artificial interface based on PVDF-HFP/LiTFSI. The enhanced Li-ion conductivity is contributed by accelerated Li-ion hopping at the surface between polymer chains and functionalized GO as well as the reduced crystallization degree of PVDF-HFP by this novel additive. The use of this modified polymer as an artificial interface on Li foil enables highly reversible Li stripping/plating and a high capacity retention of 78.4% after 150 cycles for a 0.2 A h Li metal pouch cell (Li/NCM811, strictly following practical conditions). This Li-grafted strategy on GO sheets provides an alternative for designing a compatible electrolyte/Li interface for practical Li metal batteries.

Recoverable peroxidase-like Fe3O4@MoS2-Ag nanozyme with enhanced antibacterial ability

Antibacterial agents with enzyme-like properties and bacteria-binding ability have provided an alternative method to efficiently disinfect drug-resistance microorganism. Herein, a Fe₃O₄@MoS₂-Ag nanozyme with defect-rich rough surface was constructed by a simple hydrothermal method and in-situ photodeposition of Ag nanoparticles. The nanozyme exhibited good antibacterial performance against E. coli (~69.4%) by the generated ROS and released Ag⁺, while the nanozyme could further achieve an excellent synergistic disinfection (~100%) by combining with the near-infrared photothermal property of Fe₃O₄@MoS₂-Ag. The antibacterial mechanism study showed that the antibacterial process was determined by the collaborative work of peroxidase-like activity, photothermal effect and leakage of Ag⁺. The defect-rich rough surface of MoS₂ layers facilitated the capture of bacteria, which enhanced the accurate and rapid attack of •OH and Ag⁺ to the membrane of E. coli with the assistance of local hyperthermia. This method showed broad-spectrum antibacterial performance against Gram-negative bacteria, Gram-positive bacteria, drug-resistant bacteria and fungal bacteria. Meanwhile, the magnetism of Fe₃O₄ was used to recycle the nanozyme. This work showed great potential of engineered nanozymes for efficient disinfection treatment.

Intertwined Nanosponge Solid-State Polymer Electrolyte for Rollable and Foldable Lithium-Ion Batteries

Herein, we report a straigthforward procedure to prepare an excellent intertwined nanosponge solid-state polymer electrolyte (INSPE) for highly bendable, rollable, and foldable lithium-ion batteries (LIBs). The mechanically reliable and electrochemically superior INSPE is conjugated with intertwined nanosponge (IN) poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and ion-conducting polymer electrolyte (PE) containing poly(ethylene glycol) diacrylate (PEGDA), succinonitrile (SCN) plasticizer, and lithium bis(trifluoromethanesilfonyl)imide (LiTFSI). The conjugated INSPE has both high strength with great flexibility (tensile strength of 2.1 MPa, elongation of 36.7%), and excellent ionic conductivity (1.04 × 10^-3 S·cm^-1, similar to the values of liquid electrolytes). As a result of such special combination, the as-prepared INSPE retains almost 100% of its ionic conductivity when subjected to many types of severe mechanical deformations. Therefore, the INSPE is successfully applied to bendable, rollable, and foldable LIBs that show excellent energy storage performance despite the intense mechanical deformations.

Mechanically Robust Gel Polymer Electrolyte for an Ultrastable Sodium Metal Battery

Sodium dendrite growth is responsible for short circuiting and fire hazard of metal batteries, which limits the potential application of sodium metal anode. Sodium dendrite can be effectively suppressed by applying mechanically robust electrolyte in battery systems. Herein, a composite gel polymer electrolyte (GPE) is designed and fabricated, mainly consisting of graphene oxide (GO) and polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP). With the addition of an appropriate amount of GO content, the compressive Young's modulus of 2 wt% GO+PVDF-HFP (2-GPH) composite GPE is greatly enhanced by a factor of 10, reaching 2.5 GPa, which is crucial in the suppression of sodium dendrite growth. As a result, uniform sodium deposition and ultralong reversible sodium plating/stripping (over 400 h) at high current density (5 mA cm^-2 ) are achieved. Furthermore, as evidenced by molecular dynamics simulation, the GO content facilitates the sodium ion transportation, giving a high ionic conductivity of 2.3 × 10^-3 S cm^-1 . When coupled with Na₃ V₂ (PO₄ )₃ cathode in a full sodium metal battery, a high initial capacity of 107 mA h g^-1 at 1 C (1 C = 117 mA g^-1 ) is recorded, with an excellent capacity retention rate of 93.5% and high coulombic efficiency of 99.8% after 1100 cycles.

Porous (PVDF-HFP/PANI/GO) ternary hybrid polymer electrolyte membranes for lithium-ion batteries

A poly(vinylidene co-hexafluoropropylene) (PVDF-HFP) membrane is functionalized with polyaniline (PANI) and graphene oxide (GO) nanoparticles. The obtained PVDF-HFP polymer electrolyte membranes (PEMs) have been characterized and implemented in lithium-ion batteries. As a result, the PVDF-HFP/PANI membrane shows the highest ionic conductivity (IC) of 1.04 × 10⁻³ mS cm⁻¹ compared to pristine PVDF-HFP and PVDF-HFP/PANI/GO ternary membrane; however, PANI addition decreases the tensile strength of the PVDF-HFP membrane from 4.2 MPa to 2.8 MPa. Therefore, GO is introduced to recover the reduced mechanical strength of the PVDF-HFP/PANI membrane. The obtained PVDF-HFP/PANI/GO ternary membrane shows a remarkable improvement in tensile strength of up to 8.8 MPa; however, slight reduction is observed in the ionic conductivity of 6.64 × 10⁻⁴ mS cm⁻¹. Furthermore, the PVDF-HFP/PANI/GO ternary membrane exhibits outstanding thermal and mechanical stabilities, improved morphology, highest electrolyte uptake (367.5%) and an excellent porosity of around 89%. Moreover, the PVDF-HFP/PANI/GO ternary PEM has been successfully applied in a lithium-ion battery, which can retain over 95% capacity after 30 cycles. Therefore, the proposed PVDF-HFP/PANI/GO ternary membrane can be a promising candidate as a separator in future lithium-ion batteries.

A poly(vinylidene co-hexafluoropropylene) (PVDF-HFP)/polyaniline (PANI/graphene oxide (GO) ternary PEM in lithium ion battery.