Poly(l-lactide)/cyclodextrin/citrate networks modified hydroxyapatite and its role as filler in the promotion to the properties of poly(l-lactide) biomaterials

Epoxidized Soybean Oleic Acid/Oligomeric Poly(lactic acid)-Grafted Nano-Hydroxyapatite and Its Role as a Filler in Poly(L-lactide) for Potential Bone Fixation Application

One of the most effective strategies for modifying the surface properties of nano-fillers and enhancing their composite characteristics is through polymer grafting. In this study, a coprecipitation method was employed to modify hydroxyapatite (HAP) with epoxidized soybean oleic acid (ESOA), resulting in ESOA-HAP. Subsequently, oligomeric poly(lactic acid) (OPLA) was grafted onto the surface of ESOA-HAP, yielding OPLA-ESOA-HAP. HAP, ESOA-HAP, and OPLA-ESOA-HAP were comprehensively characterized. The results demonstrate the progressive grafting of ESOA and OPLA onto the surface of HAP, resulting in enhanced hydrophobicity and improved dispersity in organic solvent for OPLA-ESOA-HAP compared to HAP. The vitality and adhesion of Wistar rat mesenchymal stem cells (MSCs) were assessed using HAP and modified HAP materials. Following culture with MSCs for 72 h, the OPLA-ESOA-HAP showed an inhibition rate lower than 23.0% at a relatively high concentration (1.0 mg/mL), which is three times lower compared to HAP under similar condition. The cell number for OPLA-ESOA-HAP was 4.5 times higher compared to HAP, indicating its superior biocompatibility. Furthermore, the mechanical properties of the OPLA-ESOA-HAP/PLLA composite almost remained unaltered ever after undergoing two stages of thermal processing involving melt extrusion and inject molding. The increase in the biocompatibility and relatively high mechanical properties render OPLA-ESOA-HAP/PLLA a potential material for the biodegradable fixation system.

Functionalization of Gold Nanostars with Cationic β-Cyclodextrin-Based Polymer for Drug Co-Loading and SERS Monitoring

Gold nanostars (AuNSs) exhibit modulated plasmon resonance and have a high SERS enhancement factor. However, their low colloidal stability limits their biomedical application as a nanomaterial. Cationic β-cyclodextrin-based polymer (CCD/P) has low cytotoxicity, can load and transport drugs more efficiently than the corresponding monomeric form, and has an appropriate cationic group to stabilize gold nanoparticles. In this work, we functionalized AuNSs with CCD/P to load phenylethylamine (PhEA) and piperine (PIP) and evaluated SERS-based applications of the products. PhEA and PIP were included in the polymer and used to functionalize AuNSs, forming a new AuNS-CCD/P-PhEA-PIP nanosystem. The system was characterized by UV–VIS, IR, and NMR spectroscopy, TGA, SPR, DLS, zeta potential analysis, FE-SEM, and TEM. Additionally, Raman optical activity, SERS analysis and complementary theoretical studies were used for characterization. Minor adjustments increased the colloidal stability of AuNSs. The loading capacity of the CCD/P with PhEA-PIP was 95 ± 7%. The physicochemical parameters of the AuNS-CCD/P-PhEA-PIP system, such as size and Z potential, are suitable for potential biomedical applications Raman and SERS studies were used to monitor PhEA and PIP loading and their preferential orientation upon interaction with the surface of AuNSs. This unique nanomaterial could be used for simultaneous drug loading and SERS-based detection.

A combined-modification method of carboxymethyl β-cyclodextrin and lignin for nano-hydroxyapatite to reinforce poly(lactide-co-glycolide) for bone materials

Lignin is the second most abundant natural biomacromolecule. A new surface-modification for nano-hydroxyapatite (n-HA) by carboxymethyl β-cyclodextrin (CM-β-CD) and lignin and its reinforce effect for poly(lactide-co-glycolide) (PLGA) were investigated by Fourier transformation infrared (FTIR), X-ray diffraction pattern (XRD), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), dispersion images, the tensile tests, scanning electron microscope (SEM), differential scanning calorimeter (DSC) and polarized optical microscopy (POM), compared to the singled-modification of CM-β-CD or lignin. The results showed that the appropriate combined-modified n-HA displayed excellent synergistic effects for increasing the dispersion, yielding good interfacial bonding between n-HA with PLGA matrix. The tensile strength of the composite was still 14.53% higher than that of PLGA, for a n-HA addition amount of 15 wt%, which was significantly better than that for the singled-modified n-HA. Additionally, in vitro degradation behavior was evaluated by soaking in simulated body fluid (SBF), and their cell response was carried out by interaction tests with bone mesenchymal stem cells. The results indicated that the combined-modification method promoted good degradation behavior and apatite deposition, as well as excellent cell biocompatibility. This study may offer an important guidance to obtain PLGA-based composites reinforced by surface-modified n-HA as bone materials.

Introduction of an interface layer on hydroxyapatite whisker/poly(L-lactide) composite and its contribution for improved bioactivity and mechanical properties

A hydroxyapatite whisker (w-HA) was synthesized via dissolution-precipitation by forming calcium-ethylene diamine tetra acetic acid (Ca-EDTA) complexing. The hydroxyapatite whisker was formed with precipitation of Ca²⁺ along the c-axis due to the space inhibition of Ca-EDTA complex during refluxing. The op-w-HA (oligomeric poly(lactic acid) modified w-HA), p-w-HA (poly(L-lactide) modified w-HA) and pc-w-HA (poly(L-lactide) and cyclodextrin modified w-HA) were obtained via the surface modification of w-HA. The particle size, surface charge and biocompatibility of theses modified w-HA particles were successfully adjusted. Among these materials, pc-w-HA exhibited nearly no toxicity, better adhesion to mesenchymal stem cells (MSCs) (5 times better than w-HA) and greater osteoinductivity among the obtained materials (40% of mineralized extracellular matrix higher than w-HA) due to better surface properties. Different kinds of powders (w-HA, p-w-HA and pc-w-HA) were blended with PLLA (poly(L-Lactide)) to form a composite material, respectively. The pc-w-HA/PLLA composite showed better mechanical properties (tensile strength of the pc-w-HA/PLLA composite was 22.3% higher than that of w-HA/PLLA), which could be attributed to mainly two factors including the structure preservation of w-HA bundles and pseudorotaxane linkage between PLA-cyclodextrin and PLLA. The MSCs adhesion of the pc-w-HA/PLLA composite was much better due to balanced hydrophilicity/hydrophobicity and surface roughness. This surface modification method could provide a new and effective strategy for the preparation of bioresorbable composite material with great bioactivity and mechanical property, which has great potential in the medical device industry.