Hypercrosslinked porous organic polymers based on tetraphenylanthraquinone for CO2 uptake and high-performance supercapacitor

Tetraphenylanthraquinone and Dihydroxybenzene-Tethered Conjugated Microporous Polymer for Enhanced CO2 Uptake and Supercapacitive Energy Storage

Conjugated microporous polymers (CMPs) feature extended excellent porosity properties and fully conjugated electronic systems, making them highly effective for several uses, including photocatalysis, dye adsorption, CO2 capture, supercapacitors, and so on. These polymers are known for their high specific surface area and adjustable porosity. To synthesize DHTP-CMPs (specifically TPE-DHTP CMP and Anthra-DHTP CMP) with abundant nitrogen (N) and oxygen (O) adsorption sites and spherical structures, we employed a straightforward Schiff-base [4 + 2] condensation reaction. This involved using 2,5-dihydroxyterephthalaldehyde (DHTP-2CHO) as the primary building block and phenolic OH group source, along with two distinct structures: 4,4',4″,4"'-(ethene-1,1,2,2-tetrayl)tetraaniline (TPE-4NH2) and 4,4',4″,4"'-(anthracene-9,10-diylidenebis(methanediylylidene))tetraaniline (Anthra-4Ph-4NH2). The synthesized Anthra-DHTP CMP had a remarkable BET surface area (BETSA) of 431 m2 g-1. Additionally, it exhibited outstanding thermal stability, as shown by a T d10 of 505 °C. Furthermore, for practical implementation, the Anthra-DHTP CMP demonstrates a significant capacity for capturing CO2, measuring 1.85 mmol g-1 at a temperature of 273 K and 1 bar. In a three-electrode test, the Anthra-DHTP CMP has a remarkable specific capacitance of 121 F g-1 at 0.5 A g-1. Furthermore, even after undergoing 5000 cycles, it maintains a capacitance retention rate of 79%. Due to their outstanding pore characteristics, abundant N and O, and conjugation properties, this Anthtra-DHTP CMP holds significant potential for CO2 capture and supercapacitor applications. This work will pave the way for the development of materials based on DHTP-CMPs and their postmodification with additional groups, facilitating their use in photocatalysis, photodegradation, lithium battery applications, and so on.

Harmonizing Between Chemical Functionality and Surface Area of Porous Organic Polymeric Nanotraps for Tuning Carbon Dioxide Capture

The energy sector has demonstrated significant enthusiasm for investigating post-combustion CO2 capture, storage, and separation. However, the practical application of current porous adsorbents is impeded by challenges related to cost competitiveness, stability, and scalability. Intregation of heteroatoms in the porous organic polymers (POPs) dispense it more susceptible for CO2 adsorption to attenuate green house gases. In this regard, two hydroxy rich hypercrosslinked POPs, namely Ph/Tt-POP have been developed by one-pot condensation polymerization using a facile synthetic strategy. The high surface areas of both the Ph/Tt-POP (1057 and 893 m2g-1, respectively), and the heteroatom functionality in the POP framework instigated us to explore our material for CO2 adsorption study. The CO2 uptake capacities in Ph/Tt-POP are found to be 2.45 and 2.2 mmol g-1, at 273 K respectively. Further, in-situ static 13C NMR experiment shows that CO2 molecules in Tt-POP appear to be less mobile than those in Ph-POP which probably due to the presence of triazine functional groups along with high abundant -OH groups in the Tt-POP framework. An in-depth study of the CO2 adsorption mechanism by density functional theory (DFT) calculations also shows that CO2 adsorption at the cages formed by two benzyl rings represents the most stable interaction and CO2 molecule is more favorably adsorbed on the Ph-POP with the more negative interaction energies values compared to that of Tt-POP. Further, Non-covalent interaction (NCI) plot reveals that CO2 molecules adsorb more on the Ph-POP than Tt-POP, which can be explain by hydrogen bond formation in case of Tt-POP repeating units turning aside CO2 molecule to interact with the Ph component. Overall, our present study reflects the comprising effects of surface area of the solid adsorbents as well as their functionality can be beneficial for developing efficient hypercrosslinked porous polymers as solid CO2 adsorbent.

Rational Design of Bifunctional Microporous Organic Polymers Containing Anthracene and Triphenylamine Units for Energy Storage and Biological Applications

In this study, we synthesized two conjugated microporous polymers (CMPs), An-Ph-TPA and An-Ph-Py CMPs, using the Suzuki cross-coupling reaction. These CMPs are organic polymers with p-conjugated skeletons and persistent micro-porosity and contain anthracene (An) moieties linked to triphenylamine (TPA) and pyrene (Py) units. We characterized the chemical structures, porosities, thermal stabilities, and morphologies of the newly synthesized An-CMPs using spectroscopic, microscopic, and N₂ adsorption/desorption isotherm techniques. Our results from thermogravimetric analysis (TGA) showed that the An-Ph-TPA CMP displayed better thermal stability with T_d10 = 467 °C and char yield of 57 wt% compared to the An-Ph-Py CMP with T_d10 = 355 °C and char yield of 54 wt%. Furthermore, we evaluated the electrochemical performance of the An-linked CMPs and found that the An-Ph-TPA CMP had a higher capacitance of 116 F g^-1 and better capacitance stability of 97% over 5000 cycles at 10 A g^-1. In addition, we assessed the biocompatibility and cytotoxicity of An-linked CMPs using the MTT assay and a live/dead cell viability assay and observed that they were non-toxic and biocompatible with high cell viability values after 24 or 48 h of incubation. These findings suggest that the An-based CMPs synthesized in this study have potential applications in electrochemical testing and the biological field.

Porogen Concentration Effect on the Pore Structure and Properties Evolution of Polymer Monolith Based on Oligocarbonate Dimethacrylate OCM-2

Porous polymer monolith materials of 2-mm thickness were obtained by visible light-induced radical polymerization of oligocarbonate dimethacrylate (OCM-2) in the presence of 1-butanol (10 to 70 wt %) as a porogenic additive. The pore characteristics and morphology of polymers were studied by mercury intrusion porosimetry and scanning electron microscopy. Monolithic polymers with both open and closed pores up to 100 nm in size are formed when the alcohol content in the initial composition is up to 20 wt %. The pore structure in such materials is a system of holes in the bulk of the polymer (hole-type pores). Open interconnected pores with a specific volume up to 2.22 cm³/g and modal pore size up to 10 microns are formed in the volume of the polymer with 1-butanol content of more than 30 wt %. Such porous monoliths are a structure of covalently bonded polymer globules (interparticle-type pores). The free space between the globules represents a system of open interconnected pores. In the transition region of 1-butanol concentrations (from 20 to 30 wt %), areas with both structures and intermediate frameworks, as well as honeycomb structures of polymer globules connected by bridges, are fixed on the polymer surface. It was found that the transition from one type of pore system to another is accompanied by a sharp change in the strength characteristics of the polymer. Approximation of experimental data using the sigmoid function made it possible to determine the concentration of the porogenic agent in the vicinity of which the percolation threshold is observed.

Conjugated hypercrosslinked polymers imprinted with 3,5-dinitrosalicylic acid for the fluorescent determination of α-amylase activity

The discovery of a series of coupling reactions between various building blocks has driven the development of porous organic polymers, but the common usage of expensive and air-sensitive organometallic catalysts and complex procedures in harsh syntheses has limited their expansion. A microporous hypercrosslinked polymer (HCP) was synthesized by polymerizing a naphthalene monomer and a 1,4-dimethoxybenzene crosslinker using Friedel-Crafts alkylation over an FeCl₃ catalyst and imprinted with 3,5-dinitrosalicylic acid (DNS). The DNS-molecularly-imprinted HCPs (MIHCPs) were characterized as having IUPAC Type I mesoporosity, a specific surface area of 1134 m² g^-1, a monolayer adsorption capacity of 116 cm² g^-1, pore sizes ranging from 5 to 8.5 Å, amorphous frameworks, and distinctive absorption and emission bands by N₂ adsorption/desorption analyses, scanning and transmission electron microscopies, and FTIR, UV-Vis, and fluorescence spectrometries. The π-conjugated imprinted framework endowed the MIHCPs with 405-nm fluorescent emission at a 330-nm excitation and dynamic quenching, which was confirmed by changes in fluorescence lifetime and followed a linear Stern-Volmer plot against 1.0-200 μM DNS template molecules under optimized conditions of a pH 7.0 buffer, an MIHCP concentration of 125 μg mL^-1, and a 3.0-min equilibration time. The MIHCPs exhibited a high imprinted factor of 8.7 against nonimprinted HCP and a selectivity of 8.63 against reduced DNS, which enabled fluorometric detection of DNS molecules produced by the hydrolysis of starch with microbial, salivary, and pancreatic α-amylases and the subsequent redox incubation with the DNS oxidant. The fluorometric measurement of α-amylase activity was higher in accuracy and precision (RSD: 2.6-2.8% vs. 3.9-4.0%) than conventional UV-Vis spectrometry because the excellent fluorescent sensitivity and imprinting selectivity of the MIHCP probes enabled the use of higher dilution factors with weaker matrix effects.

Design Hybrid Porous Organic/Inorganic Polymers Containing Polyhedral Oligomeric Silsesquioxane/Pyrene/Anthracene Moieties as a High-Performance Electrode for Supercapacitor

We synthesized two hybrid organic-inorganic porous polymers (HPP) through the Heck reaction of 9,10 dibromoanthracene (A-Br₂) or 1,3,6,8-tetrabromopyrene (P-Br₄)/A-Br₂ as co-monomers with octavinylsilsesquioxane (OVS), in order to afford OVS-A HPP and OVS-P-A HPP, respectively. The chemical structures of these two hybrid porous polymers were validated through FTIR and solid-state ¹³C and ²⁹Si NMR spectroscopy. The thermal stability and porosity of these materials were measured by TGA and N₂ adsorption/desorption analyses, demonstrating that OVS-A HPP has higher thermal stability (T_d10: 579 °C) and surface area (433 m² g^-1) than OVS-P-A HPP (T_d10: 377 °C and 98 m² g^-1) due to its higher cross-linking density. Furthermore, the electrochemical analysis showed that OVS-P-A HPP has a higher specific capacitance (177 F g ^-1 at 0.5 A F g^-1) when compared to OVS-A HPP (120 F g ^-1 at 0.5 A F g^-1). The electron-rich phenyl rings and Faradaic reaction between the π-conjugated network and anthracene moiety may be attributed to their excellent electrochemical performance of OVS-P-A HPP.

Evaluation of CO2 and H2O Adsorption on a Porous Polymer Using DFT and In Situ DRIFT Spectroscopy

Numerous hyper-cross-linked polymers (HCPs) have been developed as CO₂ adsorbents and photocatalysts. Yet, little is known of the CO₂ and H₂O adsorption mechanisms on amorphous porous polymers. Gaining a better understanding of these mechanisms and determining the adsorption sites are key to the rational design of improved adsorbents and photocatalysts. Herein, we present a unique approach that combines density functional theory (DFT), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and multivariate spectral analysis to investigate CO₂ and H₂O adsorption sites on a triazine-biphenyl HCP. We found that CO₂ and H₂O adsorb on the same HCP sites albeit with different adsorption strengths. The primary amines of the triazines were identified as favoring strong CO₂ binding interactions. Given the potential use of HCPs for CO₂ photoreduction, we also investigated CO₂ and H₂O adsorption under transient light irradiation. Under irradiation, we observed partial CO₂ and H₂O desorption and a redistribution of interactions between the H₂O and CO₂ molecules that remain adsorbed at HCP adsorption sites.

An Ultrastable Porous Polyhedral Oligomeric Silsesquioxane/Tetraphenylthiophene Hybrid as a High-Performance Electrode for Supercapacitors

In this study, we synthesized three hybrid microporous polymers through Heck couplings of octavinylsilsesquioxane (OVS) with 2,5-bis(4-bromophenyl)-1,3,4-oxadiazole (OXD-Br₂), tetrabromothiophene (Th-Br₄), and 2,5-bis(4-bromophenyl)-3,4-diphenylthiophene (TPTh-Br₂), obtaining the porous organic–inorganic polymers (POIPs) POSS-OXD, POSS-Th, and POSS-TPTh, respectively. Fourier transform infrared spectroscopy and solid state ¹³C and ²⁹Si NMR spectroscopy confirmed their chemical structures. Thermogravimetric analysis revealed that, among these three systems, the POSS-Th POIP possessed the highest thermal stability (T₅: 586 °C; T₁₀: 785 °C; char yield: 90 wt%), presumably because of a strongly crosslinked network formed between its OVS and Th moieties. Furthermore, the specific capacity of the POSS-TPTh POIP (354 F g⁻¹) at 0.5 A g⁻¹ was higher than those of the POSS-Th (213 F g⁻¹) and POSS-OXD (119 F g⁻¹) POIPs. We attribute the superior electrochemical properties of the POSS-TPTh POIP to its high surface area and the presence of electron-rich phenyl groups within its structure.

Processable Conjugated Microporous Polymer Gels and Monoliths: Fundamentals and Versatile Applications

Conjugated microporous polymers (CMPs) as a new type of conjugated polymers have attracted extensive attention in academia and industry because of the combination of microporous structure and π-electron conjugated structure. The construction and application of gels and monoliths based on CMPs constitute a fertile area of research, promising to provide solutions to complex environmental and energy issues. This review summarizes and objectively analyzes the latest advances in the construction and application of processable CMP gels and monoliths, linking the basic and enhanced properties to widespread applications. In this review, we open with a summary of the construction methods used to build CMP gels and monoliths and assess the feasibility of different preparation techniques and the advantages of the products. The CMP gels and monoliths with enhanced properties involving various special applications are then deliberated by highlighting relevant scientific literature and discussions. Finally, we present the issues and future of openness in the field, as well as come up with the major challenges hindering further development, to guide researchers in this field.

Porous organic polymers for high-performance supercapacitors

With the aim of addressing the global warming issue and fossil energy shortage, eco-friendly and sustainable renewable energy technologies are urgently needed. In comparison to energy conversion, studies on energy storage fall behind and remain largely to be explored. By storing energy from electrochemical processes at the electrode surface, supercapacitors (SCs) bridge the performance gap between electrostatic double-layer capacitors and batteries. Organic electrode materials have drawn extensive attention because of their special power density, good round trip efficiency and excellent cycle stability. Porous organic polymers (POPs) have drawn extensive attention as attractive electrode materials in SCs. In this review, we present and discuss recent advancements and design principles of POPs as efficient electrode materials for SCs from the perspectives of synthetic strategies and the structure-performance relationships of POPs. Finally, we put forward the outlook and prospects of POPs for SCs.

Ultrastable Covalent Triazine Organic Framework Based on Anthracene Moiety as Platform for High-Performance Carbon Dioxide Adsorption and Supercapacitors

Conductive and porous nitrogen-rich materials have great potential as supercapacitor electrode materials. The exceptional efficiency of such compounds, however, is dependent on their larger surface area and the level of nitrogen doping. To address these issues, we synthesized a porous covalent triazine framework (An-CTFs) based on 9,10-dicyanoanthracene (An-CN) units through an ionothermal reaction in the presence of different molar ratios of molten zinc chloride (ZnCl₂) at 400 and 500 °C, yielding An-CTF-10-400, An-CTF-20-400, An-CTF-10-500, and An-CTF-20-500 microporous materials. According to N₂ adsorption–desorption analyses (BET), these An-CTFs produced exceptionally high specific surface areas ranging from 406–751 m²·g⁻¹. Furthermore, An-CTF-10-500 had a capacitance of 589 F·g⁻¹, remarkable cycle stability up to 5000 cycles, up to 95% capacity retention, and strong CO₂ adsorption capacity up to 5.65 mmol·g⁻¹ at 273 K. As a result, our An-CTFs are a good alternative for both electrochemical energy storage and CO₂ uptake.

Microporous Carbon and Carbon/Metal Composite Materials Derived from Bio-Benzoxazine-Linked Precursor for CO2 Capture and Energy Storage Applications

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO2 capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh3)4. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (Td10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m2 g-1), high CO2 adsorption (5.40 mmol g-1 at 273 K), excellent capacitance (735 F g-1), and a capacitance retention of up to 95% after 2000 galvanostatic charge-discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.

High-Performance Supercapacitor Electrodes Prepared From Dispersions of Tetrabenzonaphthalene-Based Conjugated Microporous Polymers and Carbon Nanotubes

In this study, we prepared a series of conjugated microporous polymers (CMPs) through Sonogashira-Hagihara cross-couplings of a tetrabenzonaphthalene (TBN) monomer with pyrene (Py), tetraphenylethylene (TPE), and carbazole (Car) units and examined their chemical structures, thermal stabilities, morphologies, crystallinities, and porosities. TBN-TPE-CMP possessed a high surface area (1150 m2 g-1) and thermal stability (Td10 = 505 °C; char yield = 68 wt %) superior to those of TBN-Py-CMP and TBN-Car-CMP. To improve the conductivity of the TBN-CMP materials, we blended them with highly conductive single-walled carbon nanotubes (SWCNTs). Electrochemical measurements revealed that the TBN-Py-CMP/SWCNT nanocomposite had high capacitance (430 F g-1) at a current density of 0.5 A g-1 and outstanding capacitance retention (99.18%) over 2000 cycles; these characteristics were superior to those of the TBN-TPE-CMP/SWCNT and TBN-Car-CMP/SWCNT nanocomposites.

Designed azo-linked conjugated microporous polymers for CO2 uptake and removal applications

In recent decade, conjugated microporous polymers (CMPs) were treated as one of the superior porous materials for CO₂ uptake. Herein, we prepared two azo-linked CMPs namely: azo-carbazole (Azo-Cz) and azo-phenothiazine (Azo-Tz) from the reduction of the corresponding nitro monomers using sodium borohydride (NaBH₄). The obtained polymers were well characterized using many spectroscopic techniques. According to TGA and BET analyses, our CMPs owned good specific surface areas (reaching 315 m² g^–1), and a significant thermal stability. It is also possessed pore sizes of 0.79 and 1.18 nm, respectively, and a reasonable char yields (max. 46 %). Based on CO₂ uptake measurements, the CO₂ adsorption capacities of these CMPs were very good: up to 40 and 94 mg g^–1 at the experiment temperatures 298 and 273 K, respectively. The great CO₂ uptake is due to high surface areas that facilitate powerful interactions with CO₂ molecules.

Meso/Microporous Carbons from Conjugated Hyper-Crosslinked Polymers Based on Tetraphenylethene for High-Performance CO2 Capture and Supercapacitor

In this study, we successfully synthesized two types of meso/microporous carbon materials through the carbonization and potassium hydroxide (KOH) activation for two different kinds of hyper-crosslinked polymers of TPE-CPOP1 and TPE-CPOP2, which were synthesized by using Friedel–Crafts reaction of tetraphenylethene (TPE) monomer with or without cyanuric chloride in the presence of AlCl₃ as a catalyst. The resultant porous carbon materials exhibited the high specific area (up to 1100 m² g⁻¹), total pore volume, good thermal stability, and amorphous character based on thermogravimetric (TGA), N₂ adsoprtion/desorption, and powder X-ray diffraction (PXRD) analyses. The as-prepared TPE-CPOP1 after thermal treatment at 800 °C (TPE-CPOP1-800) displayed excellent CO₂ uptake performance (1.74 mmol g⁻¹ at 298 K and 3.19 mmol g⁻¹ at 273 K). Furthermore, this material possesses a high specific capacitance of 453 F g⁻¹ at 5 mV s⁻¹ comparable to others porous carbon materials with excellent columbic efficiencies for 10,000 cycle at 20 A g⁻¹.

Multifunctional Polyhedral Oligomeric Silsesquioxane (POSS) Based Hybrid Porous Materials for CO2 Uptake and Iodine Adsorption

In this study, two different types of hybrid porous organic polymers (POPs), polyhedral oligomeric silsesquioxane tetraphenylpyrazine (POSS-TPP) and tetraphenylethene (POSS-TPE), were successfully synthesized through the Friedel-Crafts polymerization of tetraphenylpyrazine (TPP) and tetraphenylethene (TPE), respectively, with octavinylsilsesquioxane (OVS) as node building blocks, in the presence of anhydrous FeCl₃ as a catalyst and 1,2-dichloroethane at 60 °C. Based on N₂ adsorption and thermogravimetric analyses, the resulting hybrid porous materials displayed high surface areas (270 m²/g for POSS-TPP and 741 m²/g for POSS-TPE) and outstanding thermal stabilities. Furthermore, as-prepared POSS-TPP exhibited a high carbon dioxide capacity (1.63 mmol/g at 298 K and 2.88 mmol/g at 273 K) with an excellent high adsorption capacity for iodine, reaching up to 363 mg/g, compared with the POSS-TPE (309 mg/g).

Nitrogen-rich anthraquinone–triazine conjugated microporous polymer networks as high-performance supercapacitor

Conjugated microporous polymer (CMP) networks are an emerging class of porous organic material composed of pre-designed functional structures and tailored components.

Pyrene-containing conjugated organic microporous polymers for photocatalytic hydrogen evolution from water

Pyrene based conjugated microporous polymers (CMPs) as photocatalysts with promising H₂ production efficiencies and very high stability.

Multifunctional Hypercrosslinked Porous Organic Polymers Based on Tetraphenylethene and Triphenylamine Derivatives for High-Performance Dye Adsorption and Supercapacitor

We successfully prepared two different classes of hypercrosslinked porous organic polymers (HPPs)-the tetraphenylethene (TPE) and (4-(5,6-Diphenyl-1H-Benzimidazol-2-yl)-triphenylamine (DPT) HPPs-through the Friedel-Crafts polymerization of tetraphenylethene and 4-(5,6-diphenyl-1H-benzimidazol-2-yl)-triphenylamine, respectively, with 1,4-bis(chloromethyl)benzene (Ph-2Cl) in the presence of anhydrous FeCl₃ as a catalyst. Our porous materials exhibited high BET surface areas (up to 1000 m² g^-1) and good thermal stabilities. According to electrochemical and dyes adsorption applications, the as-prepared DPT-HPP exhibited a high specific capacitance of 110 F g^-1 at a current density of 0.5 A g^-1, with an excellent cycling stability of over 2000 times at 10 A g^-1. In addition, DPT-HPP showed a high adsorption capacity up to 256.40 mg g^-1 for the removal of RhB dye from water.