Effects of annealing prior to stretching on strain induced crystallization of polyethylene terephthalate

Comparison of Eco-friendly Ti-M Bimetallic Coordination Catalysts and Commercial Monometallic Sb- or Ti-Based Catalysts for the Synthesis of Poly(ethylene-co-isosorbide terephthalate)

Sustainable development greatly benefits from the effective synthesis of bio-based copolymers that are environmentally friendly. To enhance the polymerization reactivity for the production of poly(ethylene-co-isosorbide terephthalate) (PEIT), five highly active Ti-M (M = Mg, Zn, Al, Fe, and Cu) bimetallic coordination catalysts were designed. The catalytic activity of Ti-M bimetallic coordination catalysts and single Sb- or Ti-based catalysts was compared, and the effects of catalysts with a different type of coordination metal (Mg, Zn, Al, Fe, and Cu) on the thermodynamic and crystallization properties of copolyesters were explored. In polymerization, it was found that Ti-M bimetallic catalysts with 5 ppm (Ti) had higher catalytic activity than traditional antimony-based catalysts or Ti-based catalysts with 200 ppm (Sb) or 5 ppm (Ti). The Ti-Al coordination catalyst showed the best-improved reaction rate of isosorbide among the five transition metals used. Utilizing Ti-M bimetallic catalysts, a high-quality PEIT was successfully synthesized with the highest number-average molecular weight of 2.82 × 10⁴ g/mol and the narrowest molecular weight distribution index of 1.43. The glass-transition temperature of PEIT reached 88.3 °C, allowing the copolyesters to be used in applications requiring a higher T_g, like hot filling. The crystallization kinetics of copolyesters prepared by some Ti-M catalysts was faster than that of copolyesters prepared by conventional titanium catalysts.

Development and Characterization of PBSA-Based Green Composites in 3D-Printing by Fused Deposition Modelling

Fused deposition modelling is a rapidly growing additive manufacturing technology due to its ability to build functional parts with complex geometries. The mechanical properties of a built part depend on several process parameters. The effect of wood content on the properties of 3D printed parts has been studied. Four types of filaments using poly(butylene succinate-co-adipate) (PBSA) with different reinforcement levels of Typha stem powder 0%, 5%, 10%, and 15% by weight were used for 3D printing. The density of the filaments and parts printed in this study increased with the Typha stem powder content. The thermal stability, mechanical performance, and viscoelastic properties of the different biocomposite filaments and 3D printed objects were analysed. The results show an increase in the crystallisation kinetics and a slight decrease in the thermal stability of the biomaterials. Compared to virgin PBSA FDM filaments, the PBSA biocomposite filament filled with Typha stem powder showed an increase in the tensile strength of the parts and specimens from 2.5 MPa to 8 MPa and in the modulus of elasticity from 160 MPa to 375 MPa, respectively, with additions of 5%, 10%, and 15% by mass. The addition of Typha stem fibres generated an increase in the elastic behaviour and relaxation time of the biomaterial structure, visualised by increases in the values of the viscosity components. The surface morphology reveals a decrease in the porosity of the printed samples.

Advances in Polyethylene Terephthalate Beverage Bottle Optimization: A Mini Review

Compared with other materials, polyethylene terephthalate (PET) has high transparency, excellent physical and mechanical properties in a wide temperature range and good hygiene and safety, so it is widely used in the packaging industry, especially in the packaging of beverages and foods. The optimization of PET bottles is mainly reflected in three aspects: material optimization, structure optimization and process optimization, among which there is much research on material optimization and process optimization, but there is no complete overview on structure optimization. A summary of structural optimization is necessary. Aiming at structural optimization, the finite element method is a useful supplement to the beverage packaging industry. By combining the computer-aided design technology and using finite element software for finite element simulation, researchers can replace the experimental test in the pre-research design stage, predict the effect and save cost. This review summarizes the development of PET bottles for beverage packaging, summarizes various optimization methods for preventing stress cracking in beverage packaging, and especially focuses on comparing and evaluating the effects of several optimization methods for packaging structure. Finally, the future development of all kinds of optimization based on structural optimization in the field of beverage packaging is comprehensively discussed, including personalized design, the combination of various methods and the introduction of actual impact factor calculation.

Computer Simulation of Polyethylene Terephthalate Carbonated Beverage Bottle Bottom Structure Based on Manual–Automatic Double-Adjustment Optimization

PET bottlesare often used as airtight containers for filling carbonated drinks. Because carbonated drinks contain large volumes of CO₂ gas, the container needs to bear a tremendous pressure from the inside of the bottle.If the stress exceeds the bearing limit, the material will show the phenomenon of local cracking and liquid overflow.For the structural design, the method of manual adjustment before automatic adjustment was adopted. First, through manual optimization, the initial optimal parameter combination was as follows:the inner diameter of the bottle bottom was 17 mm, the dip angle of the valley bottom was 81°, the deepest part of the valley bottom was 25 mm, and the outer diameter was 27 mm. Comsol software was used for automatic optimization. Compared with the original bottle bottom, the total maximum principal stress and total elastic strain energy in the bottle bottom after manual–automatic double optimization decreased by 69.4% and 40.0%, respectively, and the displacement caused by deformation decreased by 0.60 mm (74.1%). The extremely high reduction ratio was caused by manual–automatic double optimization.