Synthetic melanin facilitates MnO supercapacitors with high specific capacitance and wide operation potential window

Quaternary Ammonium Assisted Synthesis of Melanin-like Poly(l-DOPA) Nanoparticles with a Boosted Photothermal Effect

Poly(levodopa) nanoparticles (P(l-DOPA) NPs) are another kind of melanin mimetic besides well-established polydopamine nanoparticles (PDA NPs). Due to the presence of carboxyl groups, the oxidative polymerization of l-DOPA to obtain particles was not as efficient as that of dopamine. Several established methods toward P(l-DOPA) NP fabrication do not combine convenience, morphological regularity, size controllability, low cost, and adaptability to metal-free application scenarios. In this work, P(l-DOPA) NPs were successfully prepared in hot water with the assistant of organic quaternary ammonium, due to the extra physical cross-linking mediated by cations. The employed physical interactions could also be affected by quaternary ammonium structure (i.e., number of cation heads, length of alkyl chain) to achieve different polymerization acceleration effects. The obtained P(l-DOPA) NPs retained superior photothermal properties and outperformed PDA-based melanin materials. Furthermore, P(l-DOPA) NPs were used in photothermal tumor therapy and showed better efficacy. This study offers new insights into the synthesis of melanin-like materials, as well as new understanding of the interaction between quaternary ammonium and bioinspired polyphenolic materials.

Eumelanin-like Poly(levodopa) Nanoscavengers for Inflammation Disease Therapy

In the current years, polydopamine nanoparticles (PDA NPs) have been extensively investigated as an eumelanin mimic. However, unlike natural eumelanin, PDA NPs contain no 5,6-dihydroxyindole-2-carboxylic acid (DHICA)-derived units and may be limited in certain intrinsic properties; superior eumelanin-like nanomaterials are still actively being sought. Levodopa (l-DOPA) is a natural eumelanin precursor and expected to convert into DHICA and further remain within the final product through covalent or physical interactions. Herein, poly(levodopa) nanoparticles [P(l-DOPA) NPs] were synthesized with the assistance of zinc oxide as a supplement to synthetic eumelanin. This study found that P(l-DOPA) NPs had ∼90% DHICA-derived subunits on their surface and exhibited superior antioxidant activity compared to PDA NPs due to their looser polymeric microstructure. Benefitting from a stronger ROS scavenging ability, P(l-DOPA) NPs outperformed PDA NPs in treating cellular oxidative stress and acute inflammation. This research opens up new possibilities for the development and application of novel melanin-like materials.

Nanocellulose-based nanogenerators for sensor applications: A review

With the rapid development of the Internet of Things, nanogenerator as a green energy collection technology has attracted great attention in various fields. Specifically, the natural renewable nanocellulose as a raw material can significantly improve the environmental friendliness of the nanocellulose-based nanogenerators, which also makes the nanocellulose based nanogenerators expected to further develop in areas such as wearable devices and sensor networks. This paper mainly reports the application of nanocellulose in nanogenerator, focusing on the sensor. The types, sources and preparation methods of nanocellulose are briefly introduced. At the same time, the special structure of nanocellulose highlights the advantages of nanocellulose in nanogenerators. Then, the application of nanocellulose-based nanogenerators in sensors is introduced. Finally, the future development prospects and shortcomings of this nanogenerator are discussed.

Nanocellulose-based composite aerogels toward the environmental protection: Preparation, modification and applications

Nanocellulose aerogel has the advantages of porosity, low density and high specific surface area, which can effectively realize the adsorption and treatment of wastewater waste gas. The methods of preparing nanocellulose mainly include mechanical, chemical and biological methods. Nanocellulose is formed into nanocellulose aerogel after gelation, solvent replacement and drying processes. Based on the advantages of easy modification of nanocellulose aerogels, nanocellulose aerogels can be functionalized with conductive fillers, reinforcing fillers and other materials to give nanocellulose aerogels in electrical, mechanical and other properties. Through functionalization, the properties of nanocellulose composite aerogel such as hydrophobicity and adsorption are improved, and the aerogel is endowed with the ability of electrical conductivity and electromagnetic shielding. Through functionalization, the applicability and general applicability of nanocellulose composite aerogel in the field of environmental protection are improved. In this paper, the preparation and functional modification methods of nanocellulose aerogels are reviewed, and the application prospects of nanocellulose composite aerogels in common environmental protection fields such as dye adsorption, heavy metal ion adsorption, gas adsorption, electromagnetic shielding, and oil-water separation are specifically reviewed, and new solutions are proposed.

Hierarchically Porous Carbon Nanosheets from One-Step Carbonization of Zinc Gluconate for High-Performance Supercapacitors

Supercapacitors, with high energy density, rapid charge-discharge capabilities, and long cycling ability, have gained favor among many researchers. However, the universality of high-performance carbon-based electrodes is often constrained by their complex fabrication methods. In this study, the common industrial materials, zinc gluconate and ammonium chloride, are uniformly mixed and subjected to a one-step carbonization strategy to prepare three-dimensional hierarchical porous carbon materials with high specific surface area and suitable nitrogen doping. The results show that a specific capacitance of 221 F g-1 is achieved at a current density of 1 A g-1. The assembled symmetrical supercapacitor achieves a high energy density of 17 Wh kg-1, and after 50,000 cycles at a current density of 50 A g-1, it retains 82% of its initial capacitance. Moreover, the operating voltage window of the symmetrical device can be easily expanded to 2.5 V when using Et4NBF4 as the electrolyte, resulting in a maximum energy density of up to 153 Wh kg-1, and retaining 85.03% of the initial specific capacitance after 10,000 cycles. This method, using common industrial materials as raw materials, provides ideas for the simple preparation of high-performance carbon materials and also provides a promising method for the large-scale production of highly porous carbons.

A Flexible Supercapacitor Based on Niobium Carbide MXene and Sodium Anthraquinone-2-Sulfonate Composite Electrode

MXene-based composites have been widely used in electric energy storage device. As a member of MXene, niobium carbide (Nb2C) is a good electrode candidate for energy storage because of its high specific surface area and electronic conductivity. However, a pure Nb2C MXene electrode exhibits limited supercapacitive performance due to its easy stacking. Herein, sodium anthraquinone-2-sulfonate (AQS) with high redox reactivity was employed as a tailor to enhance the accessibility of ions and electrolyte and enhance the capacitance performance of Nb2C MXene. The resulting Nb2C-AQS composite had three-dimensional porous layered structures. The supercapacitors (SCs) based on the Nb2C-AQS composite exhibited a considerably higher electrochemical capacitance (36.3 mF cm-2) than the pure Nb2C electrode (16.8 mF cm-2) at a scan rate of 20 mV s-1. The SCs also exhibited excellent flexibility as deduced from the almost unchanged capacitance values after being subjected to bending. A capacitance retention of 99.5% after 600 cycles was observed for the resulting SCs, indicating their good cycling stability. This work proposes a surface modification method for Nb2C MXene and facilitates the development of high-performance SCs.

Study on Electrochemical Performance of MnO@rGO/Carbon Fabric-Based Wearable Supercapacitors

In this work, we reported the electrochemical performance of a type of carbon fabric-based supercapacitor by coating MnOx@rGO nanohybrids on carbon fabric with a simple one-step hydrothermal method. We studied the mass ratio of MnOx to rGO on the electrochemical properties of the carbon fabric-based supercapacitors. We found that as the mass ratio is 0.8:1 for MnO@rGO, the supercapacitor with a loading of 5.40 mg cm^-2 of MnO@rGO nanohybrids on carbon fabric exhibits a specific capacitance of 831.25 mF cm^-2 at 0.1 mA cm^-2 current density. It also shows long-term cycling capacitance retention of 97.2% after 10,000 charge-discharge cycles at a current density of 0.4 mA cm^-2. We speculate that the high electrochemical performance results from the strong interfacial bonding between the hierarchical architecture of MnO@rGO nanohybrids and carbon fabric.

Activated Carbon Derived from Waste Oil Shale Semi-Coke for Supercapacitor Application

As fossil fuels gradually deplete, oil shale, one of the world's largest energy resources, has attracted much attention. Oil shale semi-coke (OSS) is the main byproduct of oil shale pyrolysis, which is produced in large quantities and causes severe environmental pollution. Therefore, there is an urgent need to explore a method suitable for the sustainable and effective utilization of OSS. In this study, OSS was used to prepare activated carbon by microwave-assisted separation and chemical activation, which was then applied in the field of supercapacitors. Raman, XRD, FT-IR, TEM, and nitrogen adsorption-desorption were adopted to characterize activated carbon. The results showed that ACF activated with FeCl₃-ZnCl₂/carbon as a precursor has larger specific surface area, suitable pore size, and higher degree of graphitization compared with the materials prepared by other activation methods. The electrochemical properties of several active carbon materials were also evaluated by CV, GCD, and EIS measurements. The specific surface area of ACF is 1478 m² g^-1, when the current density is 1 A g^-1, the specific capacitance is 185.0 F g^-1. After 5000 cycles of testing, the capacitance retention rate was as high as 99.5%, which is expected to provide a new strategy of converting waste products to low-cost activated carbon materials for high-performance supercapacitors.

Bio-Template Synthesis of V2O3@Carbonized Dictyophora Composites for Advanced Aqueous Zinc-Ion Batteries

In terms of new-generation energy-storing devices, aqueous zinc-ion batteries (AZIBs) are becoming the prime candidates because of their inexpensive nature, inherent safety, environmental benignity and abundant resources. Nevertheless, due to a restrained selection of cathodes, AZIBs often perform unsatisfactorily under long-life cycling and high-rate conditions. Consequently, we propose a facile evaporation-induced self-assembly technique for preparing V₂O₃@carbonized dictyophora (V₂O₃@CD) composites, utilizing economical and easily available biomass dictyophora as carbon sources and NH₄VO₃ as metal sources. When assembled in AZIBs, the V₂O₃@CD exhibits a high initial discharge capacity of 281.9 mAh g^-1 at 50 mA g^-1. The discharge capacity is still up to 151.9 mAh g^-1 after 1000 cycles at 1 A g^-1, showing excellent long-cycle durability. The extraordinary high electrochemical effectiveness of V₂O₃@CD could be mainly attributed to the formation of porous carbonized dictyophora frame. The formed porous carbon skeleton can ensure efficient electron transport and prevent V₂O₃ from losing electrical contact due to volume changes caused by Zn²⁺ intercalation/deintercalation. The strategy of metal-oxide-filled carbonized biomass material may provide insights into developing high-performance AZIBs and other potential energy storage devices, with a wide application range.

Highly Porous Carbon Aerogels for High-Performance Supercapacitor Electrodes

In recent years, porous carbon materials with high specific surface area and porosity have been developed to meet the commercial demands of supercapacitor applications. Carbon aerogels (CAs) with three-dimensional porous networks are promising materials for electrochemical energy storage applications. Physical activation using gaseous reagents provides controllable and eco-friendly processes due to homogeneous gas phase reaction and removal of unnecessary residue, whereas chemical activation produced wastes. In this work, we have prepared porous CAs activated by gaseous carbon dioxide, with efficient collisions between the carbon surface and the activating agent. Prepared CAs display botryoidal shapes resulting from aggregation of spherical carbon particles, whereas activated CAs (ACAs) display hollow space and irregular particles from activation reactions. ACAs have high specific surface areas (2503 m² g^-1) and large total pore volumes (1.604 cm³ g^-1), which are key factors for achieving a high electrical double-layer capacitance. The present ACAs achieved a specific gravimetric capacitance of up to 89.1 F g^-1 at a current density of 1 A g^-1, along with a high capacitance retention of 93.2% after 3000 cycles.

Plasma Meets MOFs: Synthesis, Modifications, and Functionalities

As a porous and network materials consisting of metals and organic ligands, metal-organic frameworks (MOFs) have become one of excellent crystalline porous materials and play an important role in the era about materials science. Plasma, as a useful tool for stimulating efficient reactions under many conditions, and the plasma-assisted technology gets more attractions and endows MOFs more properties. Based on its feature, the research about the modifications and functionalities of MOFs have been developing a certain extent. This review contains a description of the methods for plasma-assisted modification and synthesis of MOFs, with specifically focusing on the plasma-assisted potential for modifications and functionalities of MOFs. The different applications of plasma-assisted MOFs were also presented.

MOF-Derived MnO/C Nanocomposites for High-Performance Supercapacitors

As ordered porous materials, metal-organic frameworks (MOFs) have attracted tremendous attention in the field of energy conversion and storage due to their high specific surface area, permanent porosity, and tunable pore sizes. Here, MOF-derived MnO/C nanocomposites with regular octahedral shape were synthesized using a Mn-based analogue of the MIL-100 framework (Mn-MIL-100, MIL: Matérial Institut Lavoisier) as the precursor. Using aberration-corrected environmental transmission electron microscopy (ETEM), MnO nanocages with a diameter of approximately 20 nm were recognized in the MnO/C nanocomposites fabricated, dispersed in a microporous carbon matrix homogeneously. The nanocages are composed of MnO nanoparticles with a diameter of approximately 2 nm and with a single crystal structure. The specific surface area of the as-prepared MnO/C octahedra decreases to 256 m² g^-1 from 507 m² g^-1 of the Mn-MIL-100 precursor, whereas the total pore volume increases to 0.245 cm³ g^-1, which is approximately 29% higher than that of the precursor (0.190 cm³ g^-1). Additionally, when utilized as an electrode for supercapacitors, the MOF-derived MnO/C nanocomposite demonstrates a towering specific capacitance of 421 F g^-1 at 0.5 A g^-1 and good cycle stability (94%) after 5000 cycles. Our work reveals that the MnO nanoparticles in MOF-derived MnO/C nanocomposites exhibit nanocage structure characteristics, which might be inherited from the Mn-MIL-100 precursor with analogous supertetrahedron units.

Layer-by-Layer Heterostructure of MnO2@Reduced Graphene Oxide Composites as High-Performance Electrodes for Supercapacitors

In this paper, δ-MnO₂ with layered structure was prepared by a facile liquid phase method, and exfoliated MnO₂ nanosheet (e-MnO₂) was obtained by ultrasonic exfoliation, whose surface was negatively charged. Then, positive charges were grafted on the surface of MnO₂ nanosheets with a polycation electrolyte of polydiallyl dimethylammonium chloride (PDDA) in different concentrations. A series of e-MnO₂@reduced graphene oxide (rGO) composites were obtained by electrostatic self-assembly combined with hydrothermal chemical reduction. When PDDA was adjusted to 0.75 g/L, the thickness of e-MnO₂ was ~1.2 nm, and the nanosheets were uniformly adsorbed on the surface of graphene, which shows layer-by-layer morphology with a specific surface area of ~154 m²/g. On account of the unique heterostructure, the composite exhibits good electrochemical performance as supercapacitor electrodes. The specific capacitance of e-MnO₂-0.75@rGO can reach 456 F/g at a current density of 1 A/g in KOH electrolyte, which still remains 201 F/g at 10 A/g. In addition, the capacitance retention is 98.7% after 10000 charge-discharge cycles at 20 A/g. Furthermore, an asymmetric supercapacitor (ASC) device of e-MnO₂-0.75@rGO//graphene hydrogel (GH) was assembled, of which the specific capacitance achieves 94 F/g (1 A/g) and the cycle stability is excellent, with a retention rate of 99.3% over 10000 cycles (20 A/g).

New nickel-rich ternary carbonate hydroxide two-dimensional porous sheets for high-performance aqueous asymmetric supercapattery

Transition metal carbonate hydroxides (M-CHs) are promising candidates for electrode materials in supercapattery, due to their low-cost preparation and high-energy features. However, they also suffer from ionic kinetics bottlenecks without efficient morphological design. Tailoring the chemical compositions and nanostructures of electrode materials to realize high performance is significant for meeting the current demand for electrical energy storage devices. Therefore, we present a simple hydrothermal method for constructing better electrochemically active M-CHs with ternary metal components and hierarchical nanostructures that are assembled by interwoven nanosheets. Benefiting from higher contents of Ni species and superior two-dimensional/three-dimensional (2D/3D) pore structures, the fabricated cobalt-nickel-zinc carbonate hydroxides with Co/Ni/Zn molar ratios of 2:3:1 (CoNiZn-231) delivered the best specific capacity of 1130.8 C g^-1 at 1 A g^-1, decent rate performance (67.2% in 1-10 A g^-1), and excellent cycling performance (92.6% over 10,000 cycles) in comparison with the majority of mono/bimetallic materials. Then, an alkaline hybrid (CoNiZn-231//activated carbon (AC)) device is developed, which shows a high energy density of 31.62 Wh kg^-1 at a power density of 646 W kg^-1 and an excellent capacity retention of 99.27% after 10,000 cycles. Herein, the rational design of trimetallic compositions and hierarchical structures of carbonate hydroxides is described, which provides good choices for the synthesis of high-performance electrode materials in electrochemical energy storage applications.

Biosourced quinones for high-performance environmentally benign electrochemical capacitors via interface engineering

Biosourced and biodegradable organic electrode materials respond to the need for sustainable storage of renewable energy. Here, we report on electrochemical capacitors based on electrodes made up of quinones, such as Sepia melanin and catechin/tannic acid (Ctn/TA), solution-deposited on carbon paper engineered to create high-performance interfaces. Sepia melanin and Ctn/TA on TCP electrodes exhibit a capacitance as high as 1355 mF cm^-2 (452 F g^-1) and 898 mF cm^-2 (300 F g^-1), respectively. Sepia melanin and Ctn/TA symmetric electrochemical capacitors operating in aqueous electrolytes exhibit up to 100% capacitance retention and 100% coulombic efficiency over 50,000 and 10,000 cycles at 150 mA cm^-2 (10 A g^-1), respectively. Maximum power densities as high as 1274 mW cm^-2 (46 kW kg^-1) and 727 mW cm^-2 (26 kW kg^-1) with maximum energy densities of 0.56 mWh cm^-2 (20 Wh kg^-1) and 0.65 mWh cm^-2 (23 Wh kg^-1) are obtained for Sepia melanin and Ctn/TA.

Facile Electrodeposition of NiCo2O4 Nanosheets on Porous Carbonized Wood for Wood-Derived Asymmetric Supercapacitors

Multichannel-porous carbon derived from wood can serve as a conductive substrate for fast charge transfer and ion diffusion, supporting the high-theory capacitance of pseudocapacitive materials. Herein, NiCo₂O₄ nanosheets, which are hierarchically porous, anchored on the surface of carbonized wood via electrodeposition for free-binder high-performance supercapacitor electrode materials, were proposed. Benefiting from the effectively alleviated NiCo₂O₄ nanosheets accumulation and sufficient active surface area for redox reaction, a N-doped wood-derived porous carbon-NiCo₂O₄ nanosheet hybrid material (NCNS–NCW) electrode exhibited a specific electric capacity of 1730 F g⁻¹ at 1 A g⁻¹ in 1 mol L⁻¹ KOH and splendid electrochemical firmness with 80% capacitance retention after cycles. Furthermore, an all-wood-based asymmetric supercapacitor based on NCNS–NCW//NCW was assembled and a high energy density of 56.1 Wh kg⁻¹ at a watt density of 349 W kg⁻¹ was achieved. Due to the great electrochemical performance of NCNS–NCW, we expect it to be used as an electrode material with great promise for energy storage equipment.