Self-healable, recyclable, mechanically tough transparent polysiloxane elastomers based on dynamic microphase separation for flexible sensor

High toughness, healable, self-cleaning polydimethylsiloxane elastomers with "rigid-while-flexible" mutual network structure

Polydimethylsiloxane (PDMS) elastomers with high mechanical and healing properties are developed as smart materials for electrical power systems and electronic devices to address electrical or mechanical damage. However, the challenge is to reconcile the conflicting molecular mechanisms of mechanical and healing properties in the development of PDMS elastomers. This study adopts the "rigid-while-flexible" mutual network structure by copolymerizing the rigid polyimide (PI) with flexible segments with dynamic reversible crosslinking designed on the PDMS backbones. This elastomer (designated PSiPI) exhibits high toughness, tensile strength and elongation at break, as well as excellent healing efficiency and recyclability. Moreover, the PSiPI elastomer also exhibits good insulation and corona damage healing properties. Taking advantage of the recyclability and healing properties of PSiPI elastomers, healable superhydrophobic coatings with contact angles greater than 150° have been prepared by compositing PSiPI elastomers with SiO2. Likewise, combining the elastomer with conductive materials can create a healing flexible conductor. This "rigid-while-flexible" design approach provides important inspiration for the development of high-performance, sustainable and environmentally friendly PDMS elastomers for electrical and electronic applications.

Facile Preparation of a Transparent, Self-Healing, and Recyclable Polysiloxane Elastomer Based on a Dynamic Imine and Boroxine Bond

Transparent polysiloxane elastomers with good self-healing and reprocessing abilities have attracted significant attention in the field of artificial skin and flexible displays. Herein, we propose a simple one-pot method to fabricate a room temperature self-healable polysiloxane elastomer (HPDMS) by introducing dynamic and reversible imine bonds and boroxine into polydimethylsiloxane (PDMS) networks. The presence of imine bonds and boroxine is proved by FT-IR and NMR spectra. The obtained HPDMS elastomer is highly transparent with a transmittance of up to 80%. The TGA results demonstrated that the HPDMS elastomer has good heat resistance and can be used in a wide temperature range. A lower glass transition temperature (Tg, -127.4 °C) was obtained and revealed that the elastomer is highly flexible at room temperature. Because of the reformation of dynamic reversible imine bonds and boroxine, the HPDMS elastomers exhibited excellent autonomous self-healing properties. After healing for 3 h, the self-healing efficiency of HPDMS reached 96.3% at room temperature. Moreover, the elastomers can be repeatedly reprocessed multiple times under milder conditions. This work provides a simple but effective method to prepare transparent self-healable and reprocessable polysiloxane elastomers.

Self-healing flexible strain sensor fabricated through 3D printing template sacrifice for motion monitoring with enhanced healing and mechanical performance

With the advancements in flexible materials and information technology, flexible sensors are becoming increasingly pervasive in various aspects of life and production. They hold immense potential for further development in areas such as motion detection, electronic skin, soft robots, and wearable devices. Aminopropyl-terminated polydimethylsiloxane (PDMS) was used as the raw material, while a diisocyanate reagent served as the cross-linking agent for the polymerization reaction, which involved the introduction of ureido groups, containing N-H and C=O bonds, into the long siloxane chain. The dynamic hydrogen bonding between the clusters completes the self-healing of the material. Using 1-[3-(trimethoxysilyl)propyl]urea as a grafting agent, the urea groups are introduced into graphene oxide and carbon nanotubes (CNTs) as conductive fillers. Subsequently, a flexible polymer is used as the substrate to prepare conductive flexible self-healing composites. By controlling the amount of conductive fillers, flexible strain materials with varying sensitivities are obtained. Design the structure of the flexible strain sensor using three-dimensional (3D) modeling software with deposition printing method.

Synergistic Self-Healing Enhancement in Multifunctional Silicone Elastomers and Their Application in Smart Materials

Organosilicon polymers (silicones) are of enduring interest both as an established branch of polymer chemistry and as a segment of commercial products. Their unique properties were exploited in a wide range of everyday applications. However, current silicone trends in chemistry and materials engineering are focused on new smart applications, including stretchable electronics, wearable stress sensors, protective coatings, and soft robotics. Such applications require a fresh approach to methods for increasing the durability and mechanical strength of polysiloxanes, including crosslinked systems. The introduction of self-healing options to silicones has been recognized as a promising alternative in this field, but only carefully designed multifunctional systems operating with several different self-healing mechanisms can truly address the demands placed on such valuable materials. In this review, we summarized the progress of research efforts dedicated to the synthesis and applications of self-healing hybrid materials through multi-component systems that enable the design of functional silicon-based polymers for smart applications.

Dual Reversible Network Nanoarchitectonics for Ultrafast Light-Controlled Healable and Tough Polydimethylsiloxane-Based Composite Elastomers

It is highly desirable to develop polydimethylsiloxane (PDMS) elastomers with high self-healing efficiency and excellent mechanical properties. However, most self-healable materials reported to date still take several hours to self-heal and improving the self-healing property often comes at the expense of mechanical properties. Herein, a simple design strategy of dual reversible network nanoarchitectonics is reported for constructing ultrafast light-controlled healable (40 s) and tough (≈7.2 MJ m-3) PDMS-based composite elastomers. The rupture reconstruction of dynamic bonds and the reinforcement effect of carbon nanotubes (10 wt %) endowed our composite elastomer with excellent fracture toughness that originated from a good yield strength (≈1.1 MPa) and stretchability (≈882%). Moreover, carbon nanotubes can quickly and directly heat the damaged area of the composite to achieve its ultrafast repair with the assistance of dynamic polymer/filler interfacial interaction, greatly shortening the self-healing time (12 h). The self-healing performance is superior to that of reported self-healable PDMS-based materials. This novel strategy and the as-prepared supramolecular elastomer can inspire further various practical applications, such as remote anti-icing/deicing materials.

Self-Healing Silicone Materials: Looking Back and Moving Forward

This review is dedicated to self-healing silicone materials, which can partially or entirely restore their original characteristics after mechanical or electrical damage is caused to them, such as formed (micro)cracks, scratches, and cuts. The concept of self-healing materials originated from biomaterials (living tissues) capable of self-healing and regeneration of their functions (plants, human skin and bones, etc.). Silicones are ones of the most promising polymer matrixes to create self-healing materials. Self-healing silicones allow an increase of the service life and durability of materials and devices based on them. In this review, we provide a critical analysis of the current existing types of self-healing silicone materials and their functional properties, which can be used in biomedicine, optoelectronics, nanotechnology, additive manufacturing, soft robotics, skin-inspired electronics, protection of surfaces, etc.

Research status of polysiloxane-based piezoresistive flexible human electronic sensors

Flexible human body electronic sensor is a multifunctional electronic device with flexibility, extensibility, and responsiveness. Piezoresistive flexible human body electronic sensor has attracted the extensive attention of researchers because of its simple preparation process, high detection sensitivity, wide detection range, and low power consumption. However, the wearability and affinity to the human body of traditional flexible human electronic sensors are poor, while polysiloxane materials can be mixed with other electronic materials and have good affinity toward the human body. Therefore, polysiloxane materials have become the first choice of flexible matrixes. In this study, the research progress and preparation methods of piezoresistive flexible human electronic sensors based on polysiloxane materials in recent years are summarized, the challenges faced in the development of piezoresistive flexible human electronic sensors are analyzed, and the future research directions are prospected.

Multivalent Design of Low-Entropy-Penalty Ion-Dipole Interactions for Dynamic Yet Thermostable Supramolecular Networks

Dynamic supramolecular networks are constantly accompanied by thermal instability. The fundamental reason is most reversible noncovalent bonds quickly decay at elevated temperatures and dissociate below 100 °C. Here, in this paper, we realize a reversible ion-dipole interaction with high-temperature stability exceeding 150 °C. The resultant supramolecular network can simultaneously possess mechanical strength of 1.32 MPa (14.8 times that of pristine material), dynamic self-healing capability, and a stable working temperature of up to 200 °C. From the prolonged characteristic relaxation time of 600 s even at 100 °C, our material represents one of the most thermally stable dynamic supramolecular polymers. These remarkable performances are achieved by using a new multivalent yet low-entropy-penalty molecular design. In this way, the noncovalent bond can reach a high enthalpy while minimizing the entropy-dominated thermal dissociations.

Mechanically Robust Dual-Crosslinking Elastomer Enabled by a Facile Self-Crosslinking Approach

We propose a simple but rapid strategy to fabricate self-crosslinked dual-crosslinking elastomers (SCDCEs) with high mechanical properties. The SCDCEs are synthesized through one-pot copolymerization of Butyl acrylate (BA), acrylic amide (AM), and 3-Methacryloxypropyltrimethoxysilane (MEMO). Both the amino group on AM and the methoxy group on MEMO can be self-crosslinked after polymerization to form a dual-network crosslink consisting of hydrogen bonds crosslink and Si-O-Si covalent bonds crosslink. The SCDC endow optimal elastomer with high mechanical properties (the tensile strength is 6MPa and elongation at break is 490%) as the hydrogen bonds crosslink can serve as sacrificial construction to dissipate stress energy, while covalent crosslinking networks can ensure the elasticity and strength of the material. These two networks also contribute to the recoverability of the elastomers, leading them to recover their original shape and mechanical properties after being subjected to deformation in a short time.