Direct room-temperature synthesis of a highly dispersed Pd nanoparticle catalyst and its electrical properties in a fuel cell

Immobilized Nanomaterials for Environmental Applications

Nanomaterials (NMs) have been extensively used in several environmental applications; however, their widespread dissemination at full scale is hindered by difficulties keeping them active in engineered systems. Thus, several strategies to immobilize NMs for their environmental utilization have been established and are described in the present review, emphasizing their role in the production of renewable energies, the removal of priority pollutants, as well as greenhouse gases, from industrial streams, by both biological and physicochemical processes. The challenges to optimize the application of immobilized NMs and the relevant research topics to consider in future research are also presented to encourage the scientific community to respond to current needs.

Rapid and Facile Microwave-Assisted Synthesis of Palladium Nanoparticles and Evaluation of Their Antioxidant Properties and Cytotoxic Effects Against Fibroblast-Like (HSkMC) and Human Lung Carcinoma (A549) Cell Lines

We report here a simple microwave irradiation method (850 W, 3 min) for the synthesis of palladium nanoparticles (Pd NPs) using ascorbic acid (as reducing agent) and sodium alginate (as stabilizer agent). The synthesized nanoparticles were characterized using transmission electron microscopy (TEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), UV-Visible spectroscopy, and Fourier transform infrared spectroscopy (FTIR) techniques. Antioxidant properties and cytotoxic effects of as-synthesized Pd NPs and Pd (II) acetate were also assessed. UV-Vis study showed the formation of Pd NPs with maximum absorption at 345 nm. From TEM analysis, it was observed that the Pd NPs had spherical shape with particle size distribution of 13-33 nm. Based on DPPH radical scavenging activity and reducing power assay, the antioxidant activities of Pd NPs were significantly higher than the Pd (II) acetate (p < 0.05). At the same concentration of 640 μg/mL, the scavenging activities were 32.9 ± 3.2% (Pd (II) acetate) and 27.2 ± 2.1% (Pd NPs). For A549 cells treated 48 h with Pd NPs, Pd (II) acetate, and cisplatin, the measured concentration necessary causing 50% cell death (IC₅₀) was 7.2 ± 1.7 μg/mL, 32.1 ± 2.1 μg/mL, and 206.2 ± 3.5 μg/mL, respectively. On HSkMC cells, the IC₅₀ of the Pd NPs (320 μg/mL) was higher compared to Pd (II) acetate (228.7 ± 3.6 μg/mL), which confirmed lower cytotoxicity of the Pd NPs.

Metallic bionanocatalysts: potential applications as green catalysts and energy materials

Microbially generated or supported nanocatalysts have potential applications in green chemistry and environmental application. However, precious (and base) metals biorefined from wastes may be useful for making cheap, low-grade catalysts for clean energy production. The concept of bionanomaterials for energy applications is reviewed with respect to potential fuel cell applications, bio-catalytic upgrading of oils and manufacturing 'drop-in fuel' precursors. Cheap, effective biomaterials would facilitate progress towards dual development goals of sustainable consumption and production patterns and help to ensure access to affordable, reliable, sustainable and modern energy.

Heat-treated Escherichia coli as a high-capacity biosorbent for tungsten anions

Adsorption performance in the biosorption of tungsten using Escherichia coli cells can be significantly improved by using cell suspensions that have been heat-treated at ⩽100°C. In the case of E. coli cells suspension heated at 100°C, the aqueous tungsten ions concentration rapidly decreased from 0.8mmol/L to practically zero within 1h. This biosorption time is much shorter than that of non-heat treated E. coli cells (7h). Furthermore, the adsorption saturation amount for cells heat-treated at 100°C was significantly increased up to 1.62mmol-W/g-E. coli compared to the unheated E. coli cells case (0.62mmol-W/g-E. coli). Determination of the surface potential and surface structure along with quantitative analyses of free amino acids of heat-treated E. coli cells were also carried out and revealed that heated cells have a high zeta potential and express a higher concentration of amino acids on the cell surface.

Biomanufacture of nano-Pd(0) by Escherichia coli and electrochemical activity of bio-Pd(0) made at the expense of H2 and formate as electron donors

Objective

Palladised cells of Desulfovibrio desulfuricans and Shewanella oneidensis have been reported as fuel cell electrocatalysts but growth at scale may be unattractive/costly; we have evaluated the potential of using E. coli, using H₂/formate for Pd-nanoparticle manufacture.

Results

Using ‘bio-Pd’ made under H₂ (20 wt%) cyclic voltammograms suggested electrochemical activity of bio-NPs in a native state, attributed to proton adsorption/desorption. Bio-Pd prepared using formate as the electron donor gave smaller, well separated NPs; this material showed no electrochemical properties, and hence little potential for fuel cell use using a simple preparation technique. Bio-Pd on S. oneidensis gave similar results to those obtained using E. coli.

Conclusion

Bio-Pd is sufficiently conductive to make an E. coli-derived electrochemically active material on intact, unprocessed bacterial cells if prepared at the expense of H₂, showing potential for fuel cell applications using a simple one-step preparation method.

Pd nanoparticles supported on reduced graphene–E. coli hybrid with enhanced crystallinity in bacterial biomass

Schematic showing the possible electronic interactions betweenE. coli, Pd(ii) and GO during the simultaneous reduction process leading to enhanced crystallinity in bacterial biomass.

Applications of biosynthesized metallic nanoparticles - a review

We present a comprehensive review of the applications of biosynthesized metallic nanoparticles (NPs). The biosynthesis of metallic NPs is the subject of a number of recent reviews, which focus on the various "bottom-up" biofabrication methods and characterization of the final products. Numerous applications exploit the advantages of biosynthesis over chemical or physical NP syntheses, including lower capital and operating expenses, reduced environmental impacts, and superior biocompatibility and stability of the NP products. The key applications reviewed here include biomedical applications, especially antimicrobial applications, but also imaging applications, catalytic applications such as reduction of environmental contaminants, and electrochemical applications including sensing. The discussion of each application is augmented with a critical review of the potential for continued development.

Preparation and Electrocatalytic Characteristics Research of Pd/C Catalyst for Direct Ethanol Fuel Cell

Two kinds of carbon-support 20% Pd/C catalysts for use in direct ethanol fuel cell (DEFC) have been prepared by an impregnation reduction method using NaBH4and NaH2PO2as reductants, respectively, in this study. The catalysts were characterized by XRD and TEM. The results show that the catalysts had been completely reduced, and the catalysts are spherical and homogeneously dispersed on carbon. The electrocatalytic activity of the catalysts was investigated by electrochemical measurements. The results indicate that the catalysts had an average particle size of 3.3 nm and showed the better catalytic performance, when NaBH4was used as the reducing agent. The electrochemical active surface area of Pd/C (NaBH4) was 56.4 m2·g−1. The electrochemical activity of the Pd/C (NaBH4) was much higher than that of Pd/C (NaH2PO2).

Bio-palladium: from metal recovery to catalytic applications

While precious metals are available to a very limited extent, there is an increasing demand to use them as catalyst. This is also true for palladium (Pd) catalysts and their sustainable recycling and production are required. Since Pd catalysts exist nowadays mostly under the form of nanoparticles, these particles need to be produced in an environment-friendly way. Biological synthesis of Pd nanoparticles ('bio-Pd') is an innovative method for both metal recovery and nanocatalyst synthesis. This review will discuss the different bio-Pd precipitating microorganisms, the applications of the catalyst (both for environmental purposes and in organic chemistry) and the state of the art of the reactors based on the bio-Pd concept. In addition, some main challenges are discussed, which need to be overcome in order to create a sustainable nanocatalyst. Finally, some outlooks for bio-Pd in environmental technology are presented.