The influence of pore structure of coal on characteristics of dust generation during the process of conical pick cutting

Effect of a Simulated Coal Mine Environment on Polyurethane Grouting Material and a Proposed Polyurethane Strengthening Method

When it comes to grouting in coal mines, polyurethane (PU) is often utilized. However, it is of vital importance to consistently improve the mineral PU, considering the significant amount of environmental deterioration to which it is prone. Laboratory experiments were used to model various coal mine conditions. Additionally, a workable technique for PU strengthening using ultrasonic waves was proposed. Compression tests and scanning electron microscopy (SEM) were used to describe the PU-gangue material's induration characteristics. The results showed that ultrasound has a positive impact on PU's mechanical strength. The final strength of the PU was significantly impacted by the size of the coal gangue particles, the amount of dust, and the amount of water. The induration made of gangue and PU with the same mass but differing particle sizes was noticeably different in its compressive strength. The strengthening mechanism showed that the average size of the rigid foam after the ultrasound treatment was smaller, and the 'honeycomb'-structured space in the inner section was more compact, resulting in the rigid PU foam having a higher compressive strength after ultrasound treatment. Furthermore, the dust content and water content of coal mines need to be controlled within a specific range to ensure the effective use of PU grouting materials.

Spatial and temporal evolution of mine dust research: visual knowledge mapping analysis in Web of Science from 2001 to 2021

Dust pollution control is the basic guarantee of mine safety production, which has been widely concerned by scholars. Based on a total of 1786 publications collected by the Web of Science Core Collection (WOSCC) from 2001 to 2021, this paper analyzes the spatial-temporal distribution characteristics, hot topics, and frontier trends of the international mine dust field during the past 20 years by using Citespace and VOSviewer knowledge graph technology. The research shows that the study of mine dust can be divided into three stages: initial period (2001 ~ 2008), stable transition period (2009 ~ 2016), and boom period (2017 ~ 2021). The journals and disciplines which belong to mine dust research mainly focus on environmental science and engineering technology. A stable core group of authors and institutions have been preliminarily formed in the dust research field. The main themes of the study contained the whole process of mine dust generation, transport, prevention, and control, as well as the consequences of disaster. At present, the hot research fields mainly focus on mine dust particle pollution, multi-stage dust prevention, and emission reduction technologies, and mine occupational protection, monitoring, and early warning. In the future, the research should focus on the mechanism of dust production and transportation, the theory of efficient prevention and control, the technology and equipment of precise prevention and control of dust, and the high-precision monitoring and early warning of dust concentration. Future research should be concerned with dust control in underground mines and deep concave open-pit mines with complicated and treacherous environments, and strengthen research institutions, interdisciplinary cooperation, and interaction so as to promote the integration and application of mine dust and automation, information, and intelligent technology.

Characterization of nano-to-micron sized respirable coal dust: Particle surface alteration and the health impact

Chemical and physical properties of coal dust particles significantly influence the inhalation of respirable coal dust by miners, causing several lung diseases such as coal workers' pneumoconiosis (CWP) and silicosis. Multiple experimental techniques, including proximate/ultimate analyses, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), laser diffraction, and low-pressure CO₂ and N₂ adsorption, were used to investigate the chemical and physical properties of micron-/nano-coal particles comprehensively. Compared to the micron-scale coal dust, the nano-coal dust (prepared by cryogenic ballmill) shows the increase of carbon content and aromaticity and a decrease of oxygen content along with the reduction of oxygen-containing functional groups. Pore volume and surface area estimated by low-pressure CO₂ and N₂ adsorption have more than five-time increase for the nano-coal dust. The reduction of oxygen functional groups suggests the dropped wetting behavior of coal nanoparticles. The significantly increased pore volume and surface area in coal nanoparticles could be caused by the enhanced pore interconnectivity on the particle surface and the alteration of coal macromolecules. Weaker wettability and the highly enhanced surface area suggest potentially more significant toxicity of nano-coal dust inhaled by coal miners.

Experimental Study on the Inhibition Effects of Nitrogen and Carbon Dioxide on Coal Spontaneous Combustion

Inert gases can effectively inhibit coal spontaneous combustion. In this paper, the inhibition effect of inert gases (N2 and CO2) on coal spontaneous combustion was studied. In the low-temperature oxidation stage, the constant-temperature heat release and apparent activation energy of coal sample were measured and calculated by the C80 micro-calorimeter. In the high-temperature combustion stage, the critical temperature, maximum peak temperature, ignition temperature, and burn-out temperature of coal samples were analyzed by the synchronous thermal analyzer. The results demonstrate that with the decrease of O2 concentration, the oxidation heat release of coal samples drops gradually while the apparent activation energy increases gradually. In the N2 and CO2 atmospheres, as the O2 concentration is reduced to 1.5% and 3%, respectively, the value of apparent activation energy changes from negative to positive, and the spontaneous reaction transits to a nonspontaneous reaction. The TG-DTG (thermogravimetric-derivative thermogravimetric) curve of coal sample in the high-temperature combustion stage indicates that the critical temperature exhibits a W-shaped trend with the decrease of O2 concentration, which also leads to gradual increases of maximum peak temperature, ignition temperature, and burn-out temperature. The above results signify that increasing the inert gas concentration can gradually reduce the oxidation and combustion rate and improve the inhibition effect on coal spontaneous combustion. In addition, when the O2 concentration is the same, the inhibition effect of CO2 on coal spontaneous combustion is superior to that of N2.

Improvement of Foaming Ability of Surfactant Solutions by Water-Soluble Polymers: Experiment and Molecular Dynamics Simulation

Aqueous foam is widely used in fire extinguishing and dust suppression technologies. Improving the foaming ability is the key to reducing the added concentration of foaming agents as well as the economic cost. In this work, the effect of a water-soluble polymer (polyvinyl alcohol, PVA) on the foaming ability of anionic surfactant (sodium dodecyl ether sulfate, SDES) was studied by an experiment and molecular dynamics simulation. The experimental results showed that PVA greatly improves the foaming ability of SDES solutions when the surfactant concentration is less than 0.1%, which is attributed to the fact that the polymer can enhance the stability of bubble films and reduce the bubble rupture rate during the foam generation process. The simulation results indicate that PVA can enhance the hydration of surfactant head groups and contribute to the formation of a three-dimensional hydrogen bond network between surfactants, polymers, and water molecules, thus greatly improving the stability of bubble liquid films. The above results suggest that water-soluble polymers can be used to improve the foaming ability of surfactant solutions by enhancing the bubble film stability, which is beneficial as it reduces the added concentration of foaming agents in aqueous foam applications.