Effect of titanium hydride powder addition on microstructure and properties of titanium powder injection molding

Micro-Injection Molding and Debinding Behavior of Hydroxyapatite/Zirconia Bi-Materials Fabricated by Two-Component Micro-Powder Injection Molding Process

The micro-scale joining of two different materials using two-component micro-powder injection molding (2C-µPIM) is an intriguing technique. The formation of defects in bi-materials at different processing stages makes this technique challenging. This study presents the fabrication of defect-free bi-material micro-parts containing hydroxyapatite (HA) and 3 mol% yttria-stabilized zirconia (3YSZ) via 2C-µPIM. Critical powder volume concentrations (CPVCs) of 61.7 vol% and 47.1 vol% were obtained for the HA and 3YSZ powders, respectively. Based on the CPVCs, the optimal loadings for the HA and 3YSZ powders were selected as 60 vol% and 45 vol%, respectively. The HA and 3YSZ feedstocks were prepared by separately mixing the optimal powder contents with low-density polyethylene (LDPE) and palm stearin binders. The feedstocks displayed pseudoplastic behavior, and the lowest ranges of viscosity for the HA and 3YSZ at a temperature of 180 °C were 157.1-1392.5 Pa·s and 726.2-985.5 Pa·s, respectively. The feedstocks were injected to produce green HA/3YSZ micro-sized components. It was found that a solvent debinding temperature of 70 °C removed 60.6% of the palm stearin binder from the sample. In the thermal debinding stage, the open channels that formed in the bi-material sample's solvent debound at 70 °C and contributed to the removal of 93 to 95% of the binder system. When the debound bi-materials were sintered at 1300 °C, the highest relative density of 96.3% was obtained. The sintering operation revealed a linear shrinkage between 13 and 17% in the sintered HA/3YSZ micro-parts.

An Overview of Highly Porous Titanium Processed via Metal Injection Molding in Combination with the Space Holder Method

In the past two decades, titanium foams have attracted greater interest from the biomedical industry due to their excellent chemical and mechanical biocompatibility when used as biomimetic implants. The porous structure plays an important role in bone adhesion to an implant, allowing its growth into the component. Moreover, the voids reduce the elastic modulus, promoting greater compatibility with the bone, avoiding the stress shielding effect. In this regard, metal injection molding is an attractive process for titanium foams manufacturing due to the high microstructural control and the possibility of producing, on a large scale, parts with complex near-net-shaped structures. In this review, recent discoveries and advantages regarding the processing of titanium powders and alloys via metal injection molding combined with the space holder method are presented. This approach can be used to obtain foams with high biocompatibility with the human body at a microstructural, chemical, and mechanical level.