Room temperature photocatalytic deposition of Au nanoparticles on SnS2 nanoplates for enhanced photocatalysis

In Situ Photodeposition of Gold Nanoparticles with Exposed High-Activity Crystal Facets under Different Sacrificial Agents

In situ photodeposition presents a powerful approach for integrating noble metal co-catalysts onto semiconductor surfaces. However, achieving precise control over the microstructure of the deposited co-catalyst remains a major challenge. Au nanoparticles (NPs) are deposited onto H-KCNO using HAuCl4 in the presence of various sacrificial agents in this study. Notably, the choice of sacrificial agent decisively influences the exposed crystal facets, loaded content, and particle size of the deposited Au NPs. Importantly, in situ photodeposition under an ethanol solution facilitates the exposure of the highly active (111) and (220) crystal facets of Au. The introduction of Au NPs significantly enhances photocatalytic hydrogen evolution, achieving rates of 4.93, 57.88, and 15.44 μmol/h for H-KCNO/Au-(water, ethanol, and lactic acid), respectively. The observed photocatalytic activity for hydrogen evolution indicates that the exposure of the highly active planes emerges as critical for significant performance enhancement. Photoelectrochemical and photoluminescence measurements suggest that the highly active (111) and (220) crystal facets effectively segregate sites for redox reactions, thereby impeding the recombination of photogenerated electron-hole pairs.

Enhanced photocatalytic performance of SnS2 under visible light irradiation: strategies and future perspectives

Tin(II) sulfide (SnS2) has emerged as a promising candidate for visible light photocatalytic materials. As a member of the transition metal dichalcogenides (TMDs) family, SnS2 features a band gap of approximately 2.20 eV and a layered structure, rendering it suitable for visible light activation with a high specific surface area. However, the application of SnS2 as a visible light photocatalyst still requires improvement, particularly in addressing the high recombination of electrons and holes, as well as the poor selectivity inherent in its perfect crystal structure. Therefore, ongoing research focuses on strategies to enhance the photocatalytic performance of SnS2. In this comprehensive review, we analyze recent advances and promising strategies for improving the photocatalytic performance of SnS2. Various successful approaches have been reported, including controlling the reactive facets of SnS2, inducing defects in the crystal structure, manipulating morphologies, depositing noble metals, and forming heterostructures. We provide a detailed understanding of these phenomena and the preparation techniques involved, as well as future considerations for exploring new science in SnS2 photocatalysis and optimizing performance.

Efficient activation of persulfate by Ti3C2 MXene QDs modified ZnFe2O4 for the rapid degradation of tetracycline

Mxene-based catalysts with specific interfacial characteristics are beneficial for photocatalytic applications. Herein, Ti₃C₂ MXene modified ZnFe₂O₄ nanocomposite materials were prepared for photocatalysis. The morphology and structure of the nanocmposites were characterized by scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), which revealed that Ti₃C₂ MXene as quantum dots (QDs) was uniformly distributed on the ZnFe₂O₄ surface. The Ti₃C₂ QDs modified ZnFe₂O₄ catalyst (ZnFe₂O₄/MXene-15%) under visible light achieved 87% degradation efficiency of tetracycline within 60 min when coupled with persulfate (PS) system. The initial solution pH, PS dosage and co-existing ions were found to be the main factors affecting the heterogeneous oxidation process, while quenching experiments showed that O₂^•- is the main oxidizing species in the removal of tetracycline in ZnFe₂O₄/MXene-PS system. In addition, the cyclic experiments suggested that ZnFe₂O₄/MXene had good stability and thus it may have practical applications in industry.

The photocatalytic reduction of U(VI) by Ag-doped SnS2 materials under visible light

Efficient degradation of uranium(VI) (U(VI)) in wastewater is an urgent problem because of the chemical toxicity and radiotoxicity. In this study, the Ag_x-SnS₂ photocatalysts were compounded by a simple hydrothermal method, effectively removing U(VI) under visible light in water. Compared with SnS₂, the results indicated that Ag_x-SnS₂ would decrease the crystallinity without destroying the crystal structure. Moreover, it has excellent photocatalytic performance on the degradation rate of U(VI). Ag_0.5-SnS₂ exhibited a prominent photocatalytic reduction efficiency of UO₂²⁺ of about 86.4% under optical light for 75 min. This was attributed to Ag-doped catalysts, which can narrow the band gap and enhance absorption in visible light. Meanwhile, the doping of Ag promoted the separation of photoinduced carriers, so that more photogenerated charges participated in the photocatalytic reaction. The stability and reusability were verified by the cycle test and the potential photocatalytic mechanism was analyzed based on the experiment.

Green synthesis of two-electron centre based ZnO/NiCo2S4 QDs-OVs using Punica granatum fruit peel extract for an exceptional visible light photocatalytic degradation of doxycycline and ciprofloxacin

Biosynthesis of nanomaterials using plant extract makes them attractive in the field of photocatalysis as they are environmental friendly. The current study focused on the biosynthesis of ZnO/NiCo₂S₄ QDs (NCs) using Punica granatum fruit peel extract as the reducing agent. The nanomaterials were characterized with XRD, FTIR, Raman, SEM, TEM, UV-vis DRS, BET, PL, EIS, and ESR analysis and were used for photocatalytic degradation of doxycycline (DOX) and ciprofloxacin (CIP). The bandgap of ZnO is 3.2 eV, and the decoration of NiCo₂S₄ QDs aids in narrowing the bandgap (2.8 eV), making the NCs visible light active. The fabricated NCs achieved 99 and 89% degradation of DOX and CIP respectively. The photocatalytic efficiency of ZnO/NiCo₂S₄ QDs was much higher compared to individual ZnO and NiCo₂S₄ QDs. The half-life period of DOX and CIP were evaluated to be 58 and 152 min respectively. The percentage of TOC removal in the photodegraded product of DOX and CIP was estimated to be 99 and 89% respectively, indicating the mineralization of the compounds. The enhanced photocatalytic efficiency of the NCs was attributed to the narrowed visible light active bandgap, synergistic charge transfer across the interface, and lower charge recombination. The intermediates formed during the photocatalytic degradation of DOX and CIP were analyzed using GC-MS/MS analysis, and the photodegradation pathway was elucidated. Also, the toxicity of the intermediates was computationally analyzed using ECOSAR software. The fabricated ZnO/NiCo₂S₄ QDs have excellent stability and reusability, confirmed by XRD and XPS analysis. The reusable efficiency of the NCs for the photocatalytic degradation of DOX and CIP were 98.93, and 99.4% respectively. Thus, the biologically fabricated NCs are shown to be an excellent photocatalyst and have wide applications in environmental remediation.