Purification and characterization of lipase from solvent tolerant Pseudomonas aeruginosa PseA

Preparation of medium- and long-chain triacylglycerols rich in n-3 polyunsaturated fatty acids by bio-imprinted lipase-catalyzed interesterification

Medium and long-chain triacylglycerol (MLCT) rich in n-3 polyunsaturated fatty acids (PUFAs) were obtained in three-hour interesterification of fish oil with medium-chain triacylglycerol (MCTs), using lipase bio-imprinted with surfactant as a catalyst. Initially, for bio-imprinted lipase preparation, the interesterification reaction conditions were optimized, resulting in a lipase with 1.47 times higher catalytic activity compared to control (non-bio-imprinted). Afterwards, the reaction conditions for MLCT synthesis were optimized, using bio-imprinted lipase as a catalyst. The reaction reached equilibrium within first three hours at 70 °C temperature, 4 wt% lipase load, and molar ratio of substrate 1:1.5. Under these conditions, final product contained 18.52% MCT, 56.65% MLCT, and 24.83% long-chain triacylglycerol (LCT). To reduce the MCT content, a solvent extraction process was performed, yielding 2.42% MCT, 56.19% MLCT, and 41.39% LCT. The obtained structured lipids (SLs), enriched in n-3 PUFAs, offer significant health benefits, enhanced bioavailability, with potential applications in functional foods and nutraceuticals.

Purification and Optimization of Extracellular Lipase from a Novel Strain Kocuria flava Y4

The exogenous lipolytic activities of Kocuria sp. have been recognized earlier but the genus further contains many more unexplored strains. In this study, the extracellular lipase activity of Kocuria flava Y4 (GenBank accession no. MT773277), isolated from Dioscorea villosa during our previous study, was regulated by different physicochemical parameters, such as pH, temperature, shaking speed, and incubation time. For efficient immobilization of the extracellular lipase, 4% sodium alginate, 50 mL of 25 nM CaCl₂.2H₂O solution, and 15 min. Hardening time of gel beads in calcium chloride was used. For the first time, K. flava Y4 lipase was purified using ammonium sulphate precipitation followed by dialysis and DEAE-Sepharose anion exchange chromatography with Sepharose-6B gel filtration chromatography, yielding ∼15-fold purified lipase with a final yield of 96 U/mL. The SDS-PAGE of purified lipase displayed a single strong band, indicating a monomeric protein of 45 kDa. At a temperature of 35°C and pH 8, the purified lipase showed maximum hydrolytic activity. Using p-nitrophenyl acetate (p-NPA) as the hydrolysis substrate, the values of K_m and V_max derived from the Lineweaver–Burk plot were 4.625 mM and 125 mol/min⁻¹mg⁻¹, respectively.

Lipase immobilization on a novel class of Zr-MOF/electrospun nanofibrous polymers: Biochemical characterization and efficient biodiesel production

In this study, due to the favorable properties of MOF compounds and fibrous materials, new nanostructures of Zr-MOF/PVP nanofibrous composites were synthesized by electrospinning procedure. The related features of these samples were characterized by relevant analyzes, including SEM, BET surface area analysis, XRD, and FTIR spectroscopy. The final product showed significant properties such as small particle size distribution, large surface area, and high crystallinity. This strategy for producing these nanostructures could lead to new compounds as novel alternative materials for biological applications. Lipase MG10 was successfully immobilized on the mentioned nanofibrous composites and biochemically characterized. The lipase activity of free and immobilized lipases was considered by measuring the absorbance of pNPP (500 μM in 40 mM Tris/HCl buffer, pH 7.8, and 0.01% Triton X100) at 37 °C for 30 min. Different concentrations of glutaraldehyde, different crosslinking times, different times of immobilization, different enzyme loading, and different pH values have been optimized. Results showed that the optimized immobilization condition was achieved in 2.5% glutaraldehyde, after 2 h of crosslinking time, after 6 h immobilization time, using 180 mg protein/g support at pH 9.0. The immobilized enzyme was also totally stable after 180 min incubation at 60 °C. The free enzyme showed the maximum activity at pH 9.0, but the optimal pH of the immobilized lipase was shifted about 1.5 pH units to the alkaline area. The immobilized lipase showed about 2.7 folds (78%) higher stability than the free enzyme at 50 °C. Some divalent metal ions, including Cu²⁺ (22%), Co²⁺ (37%), Mg²⁺ (12%), Hg²⁺ (11%), and Mn²⁺ (17%) enhanced the enzyme activity of immobilized enzyme. The maximum biodiesel production (27%) from R. communis oil was obtained after 18 h of incubation by lipase MG10. The immobilized lipase displayed high potency in biodiesel production, about 83% after 12 h of incubation. These results indicated the high potency of Zr-MOF/PVP nanofibrous composites for efficient lipase immobilization.

Exploring novel Penicillium lipolytic activity from the Paranaense rainforest

In this study, we evaluated the presence of lipases in twenty fungal strains of the genus Penicillium using an efficient and low-cost method with a view to an application in the treatment of cooking oil residues. The Paranaense rainforest is one of the most biodiverse places on the planet, making it the most likely site to find new fungal strains with lipolytic potential. The objective of this study was to determine the lipolytic potential and the isoenzyme profile of fungi belonging to the Penicillium genus isolated from the Paranaense rainforest. Seven fungal strains were selected using qualitative screening. Quantitative analysis revealed that the isolate Penicillium sp. LBM 088 was the best producer of lipase, reaching 1224 U mL^-1 of lipolytic activity. Zymogram gels of the seven selected strains showed different enzymatic profiles: In general, the molecular mass of proteins varied from 26 to 42 kDa. Also, proteins from fungi grown on olive oil showed a higher variation in their molecular mass than proteins from fungi grown without the oil. The search for new lipase-secreting organisms should lead to the exploitation of biodiversity in the region.

Production, purification and biochemical characterisation of a novel lipase from a newly identified lipolytic bacterium Staphylococcus caprae NCU S6

A novel lipase, SCNL, was isolated from Staphylococcus caprae NCU S6 strain in the study. The lipase was purified to homogeneity with a yield of 6.13% and specific activity of 502.76 U/mg, and its molecular weight was determined to be approximately 87 kDa. SCNL maintained above 80% of its initial activity at a wide range of temperatures (20-50 °C) and pH values (6-11), with an optimal temperature at 40 °C and optimal pH at 9.0 with p-nitrophenyl palmitate as a substrate. SCNL exhibited a higher residual activity than the other staphylococcal lipases in the presence of common enzyme inhibitors and commercial detergents. The lipase activity was enhanced by organic solvents (isooctane, glycerol, DMSO and methanol) and metal ions (Na⁺, Ba²⁺, Ca²⁺, and Mn²⁺). The Km and Vmax values of SCNL were 0.695 mM and 262.66 s^-1mM^-1, respectively. The enzyme showed a preference for p-NP stearate, tributyrin and canola oil. These biochemical features of SCNL suggested that it may be an excellent novel lipase candidate for industrial and biotechnological applications.

Heterologous Expression and Characterization of Plant Lipase LIP2 from Elaeis guineensis Jacq. Oil Palm Mesocarp in Escherichia coli

In order to determine the potential of biochemical and structural features of Elaeis guineensis Jacq. oil palm mesocarp lipases, the LIP2 gene was isolated, expressed, purified and characterized through the Escherichia coli microbial recombinant system. Gene analysis of LIP2 revealed that it is composed of 1584 base pairs which are encoded in 528 amino acid residues with a molecular weight of around 57 kDa. LIP2 has distinctive lipolytic properties in terms of α/β fold and the catalytic triad for lipase. The LIP2 lipase was successfully expressed and purified from E. coli Rosetta (DE3) via affinity chromatography. The optimal temperature and pH for the lipase activity was 30 °C and a pH of 9, respectively. Stability was profoundly increased with the addition of metal ions (Ca2+, Mg2+, Mn+, and Ni+), along with organic solvents (ethanol and octanol). pNP myristate was the most suitable among all pNP esters. In biophysical characterization analysis, LIP2 has a thermal denaturing point at 66 °C, which mostly consists of random patterns (39.8%) followed by α-helix (30.3%), turns (23.8%) and β-sheet (6.2%). From the successful purification and characterization, the potential of oil palm mesocarp lipase was able to be further explored.

Characterization of a carboxylesterase with hyper-thermostability and alkali-stability from Streptomyces lividans TK24

A gene (estA', 804 bp) from Streptomyces lividans TK24 was artificially synthesized and successfully overexpressed as a 6His-tagged fusion protein in Escherichia coli. It encoded a carboxylesterase (EstA) that composed of 267 amino acids with a predicted molecular weight of 28.56 kDa. Multiple sequence alignment indicated that EstA has typical characteristics of esterases, including a catalytic triad (Ser93-Asp194-His224) and a conserved pentapeptide motif (Gly91-Leu92-Ser93-Met94-Gly95). Simultaneously, phylogenetic analysis indicated that EstA belongs to family VI. Biochemical characterization displayed its optimum enzyme activity was at 55 ℃ and pH 8.5. Additionally, EstA exhibited higher activity towards short carbon substrates and showed the outstanding catalytic efficiency for pNPA2 with k_cat/K_m of 2296.14 ± 10.35 s^-1 mM^-1. Notably, EstA has hyper-thermostability and good alkali stability. The activity of EstA did not change obviously when incubated at 50 and 100 ℃ for 337 and 1 h, independently. Besides, by incubating at 100 ℃ for 6 h, EstA remained about half of its initial activity. Moreover, EstA showed stability at pH ranging from 8.0 to 11.0, and about 90% residual enzyme activity was reserved by being treated at pH 8.0 or 9.0 for 80 h, especially. Such multiple features prepare EstA for a potential candidate in the field of biological catalysis of some industrial applications under harsh conditions.

An organic solvent-tolerant lipase of Streptomyces pratensis MV1 with the potential application for enzymatic improvement of n6/n3 ratio in polyunsaturated fatty acids from fenugreek seed oil

Lipase-catalyzed esterification is an efficient technique in the production of polyunsaturated fatty acid (PUFA) concentrates which are applied for nutrition and health purposes. In this project, a solvent-tolerant lipase from Streptomyces pratensis MV1 was immobilized and purified by a hydrophobic support. The purified lipase revealed enhanced activity and stability towards chemicals, organic solvents, and a broad range of pH values. The production of lipase was enhanced to 7.0 U/mL after optimization by a central composite design. Acylglycerols (AGs) rich in α-linolenic acid (45%, w/w) were produced and a favorable n-6/n-3 free fatty acid (FFA) ratio of 1.1 was achieved in fenugreek seed oil using the immobilized lipase. The ability of S. pratensis lipase in ester synthesis and the improvement of n6/n3 FFA ratio make it a suitable candidate in food production industries.

Synthesis of a green polyurethane foam from a biopolyol obtained by enzymatic glycerolysis and its use for immobilization of lipase NS-40116

The use of green sources for materials synthesis has gained popularity in recent years. This work investigated the immobilization of lipase NS-40116 (Thermomyces lanuginosus lipase) in polyurethane foam (PUF) using a biopolyol obtained through the enzymatic glycerolysis between castor oil and glycerol, catalyzed by the commercial lipase Novozym 435 for the PUF formation. The reaction was performed to obtain biopolyol resulting in the conversion of 64% in mono- and diacylglycerol, promoting the efficient use of the reaction product as biopolyol to obtain polyurethane foam. The enzymatic derivative with immobilized lipase NS-40116 presented apparent density of 0.19 ± 0.03 g/cm³ and an immobilization yield was 94 ± 4%. Free and immobilized lipase NS-40116 were characterized in different solvents (methanol, ethanol, and propanol), temperatures (20, 40, 60 and 80 °C), pH (3, 5, 7, 9 and 11) and presence of ions Na⁺, Mg⁺⁺, and Ca⁺⁺. The support provided higher stability to the enzyme, mainly when subjected to acid pH (free lipase lost 80% of relative activity after 360 h of contact, when the enzymatic derivative lost around 22%) and high-temperature free lipase lost 50% of relative activity, while the immobilized remained 95%. The enzymatic derivative was also used for esterification reactions and conversions around 66% in fatty acid methyl esters, using abdominal chicken fat as feedstock, were obtained in the first use, maintaining this high conversion until the fourth reuse, proving that the support obtained using environmentally friendly techniques is applicable.

Cloning and protein expression of the sn-1(3) regioselective lipase from Cordyceps militaris

In this study, the gene of a novel lipase with sn-1(3) regioselectivity (i.e., sn-1 or sn-3 specific) from Cordyceps militaris was successfully expressed by a heterologous expression system. Total RNA was extracted from C. militaris and then single-stranded cDNA was synthesized. The resulting C. militaris lipase (CML) gene was inserted in Escherichia coli expression plasmids [pET-29b(+), pET-26b, and pColdIII] to construct plasmids encoding CML, which were then transformed to E. coli strains BL21 (DE3), C43 (DE), C41 (DE3), and Origami (DE3) for protein expression. Although the recombinant CML expression level was high, it was overproduced in the form of inclusion bodies. Under a specific condition, the soluble form of the recombinant CML was detected using Western blot analysis; however, no enzyme activity was observed. To overcome the lack of post-translational modifications in recombinant CML, a baculovirus-insect expression system was introduced for eukaryotic lipase expression. pDualBac was used as the transfer vector, and the CML gene was fused under the control of the polyhedrin promoter. After generating the recombinant baculovirus, the active form of CML was successfully produced and its kinetic parameters were determined.

An alkaline and surfactant-tolerant lipase from Trichoderma lentiforme ACCC30425 with high application potential in the detergent industry

Alkaline lipases with adaptability to low temperatures and strong surfactant tolerance are favorable for application in the detergent industry. In the present study, a lipase-encoding gene, TllipA, was cloned from Trichoderma lentiforme ACCC30425 and expressed in Pichia pastoris GS115. The purified recombinant TlLipA was found to have optimal activities at 50 °C and pH 9.5 and retain stable over the pH range of 6.0–10.0 and 40 °C and below. When using esters of different lengths as substrates, TlLipA showed preference for the medium length p-nitrophenyl octanoate. In comparison to commercial lipases, TlLipA demonstrated higher tolerance to various surfactants (SDS, Tween 20, and Triton X100) and retained more activities after incubation with Triton X100 for up to 24 h. These favorable characteristics make TlLipA prospective as an additive in the detergent industry.

Pseudomonas sp. BUP6 produces a thermotolerant alkaline lipase with trans-esterification efficiency in producing biodiesel

The present study describes the characteristics of a thermotolerant and alkaline lipase secreted by Pseudomonas sp. BUP6, a novel rumen bacterium isolated from Malabari goat, and its trans-esterification efficiency in producing biodiesel from used cooking oil (UCO). The extracellular lipase was purified to homogeneity (35.8 times purified with 14.8% yield) employing (NH₄)₂SO₄ salt precipitation and Sephadex G-100 chromatography. The apparent molecular weight of this lipase on SDS-PAGE was 35 kDa, the identity of which was further confirmed by MALDI-TOF/MS. The purified lipase was found stable at a pH range of 7-9 with the maximum activity (707 U/ml) at pH 8.2; and was active at the temperature ranging from 35 to 50 °C with the optimum at 45 °C (891 U/ml). Triton X-100 and EDTA had no effect on the activity of lipase; whereas SDS, Tween-80 and β-mercaptoethanol inhibited its activity significantly. Moreover, Ca²⁺ (1.0 mM) enhanced the activity of lipase (1428 U/ml) by 206% vis-à-vis initial activity; while Zn²⁺, Fe²⁺ and Cu²⁺ decreased the activity significantly. Using para-nitrophenyl palmitate as substrate, the K_m (11.6 mM) and V_max [668.9 μmol/(min/mg)] of the purified lipase were also determined. Crude lipase was used for analyzing its trans-esterification efficiency with used cooking oil and methanol which resulted in the worthy yield of fatty acid methyl esters, FAME (45%) at 37 °C, indicating its prospects in biodiesel industry. Thus, the lipase secreted by the rumen bacterium, Pseudomonas sp. BUP6, offers great potentials to be used in various industries including the production of biodiesel by trans-esterification.

Cell-bound lipases from Burkholderia sp. ZYB002: gene sequence analysis, expression, enzymatic characterization, and 3D structural model

Background

The whole-cell lipase from Burkholderia cepacia has been used as a biocatalyst in organic synthesis. However, there is no report in the literature on the component or the gene sequence of the cell-bound lipase from this species. Qualitative analysis of the cell-bound lipase would help to illuminate the regulation mechanism of gene expression and further improve the yield of the cell-bound lipase by gene engineering.

Results

Three predictive cell-bound lipases, lipA, lipC21 and lipC24, from Burkholderia sp. ZYB002 were cloned and expressed in E. coli. Both LipA and LipC24 displayed the lipase activity. LipC24 was a novel mesophilic enzyme and displayed preference for medium-chain-length acyl groups (C10-C14). The 3D structural model of LipC24 revealed the open Y-type active site. LipA displayed 96 % amino acid sequence identity with the known extracellular lipase. lipA-inactivation and lipC24-inactivation decreased the total cell-bound lipase activity of Burkholderia sp. ZYB002 by 42 % and 14 %, respectively.

Conclusions

The cell-bound lipase activity from Burkholderia sp. ZYB002 originated from a multi-enzyme mixture with LipA as the main component. LipC24 was a novel lipase and displayed different enzymatic characteristics and structural model with LipA. Besides LipA and LipC24, other type of the cell-bound lipases (or esterases) should exist.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-016-0269-6) contains supplementary material, which is available to authorized users.

A statistical approach for optimization of alkaline lipase production by ascidian associated-Halobacillus trueperi RSK CAS9

A marine ascidian-associated bacterium, Halobacillus trueperi RSK CAS9, was optimized for lipase production by response surface methodology using marine waste as substrate. The central composite design was employed, and the optimal medium constituents for maximum lipase production (1355.81 U/ml) were determined to be tuna powder (14.58 g/l), olive oil (5.05 ml/l); NaCl (72.42 g/l), temperature (45 °C) and pH 9.0. An alkaline lipase was purified to 8.46 fold with 1193.59 U mg⁻¹ specific activities with the molecular weight of 44 kDa. The activity was substantially inhibited by EDTA and PMSF, indicating that it was a metalloenzyme serine residue which was essential for catalytic activity. Thus, lipase production by microbial conversion of marine fish wastes in this study suggested its potential utilization for the production of high value products.

Degradation of Jatropha curcas phorbol esters derived from Jatropha oil cake and their tumor-promoting activity

Large amount of oil cake is generated during biodiesel production from Jatropha seeds. Although Jatropha oil cake is rich in plant nutrients, presence of toxic phorbol esters restricts the usage of oil cake as a fertilizer. The objective of this study is to evaluate the components and tumor promoting activity of phorbol esters in Jatropha oil cake-supplemented soil and plants grown in the treated soil. Contents and their biological activity of Jatropha phorbol esters in soil and plants were sequentially analyzed by high-performance liquid chromatography (HPLC) and in vitro cell transformation assay, respectively. Disappearance of Jatropha phorbol-ester-specific peaks were followed with HPLC during incubation of Jatropha oil cake with soil for five weeks. Along with the degradation of Jatropha phorbol ester in soil, tumor-promoting activity in the sample was also attenuated and ultimately disappeared. Jatropha phorbol esters and tumor promoting activity were not detected from mustard spinach grown in the Jatropha oil cake-supplemented soil. In addition, the esterase KM109 degrades DHPB (see definition below; Jatropha phorbol ester) and reduced its tumor-promoting activity. From these data, we conclude: (1) components and tumor promoting activity of Jatropha phorbol esters in the oil cake disappeared completely by incubation with soil for five-week, (2) Jatropha phorbol esters did not transfer into plants grown in the Jatropha oil cake-supplemented soil, and (3) DHPB can be degraded by esterase from soil bacterium. These observations are useful for utilization of Jatropha oil cake as a fertilizer.

Identification, characterization, and immobilization of an organic solvent-stable alkaline hydrolase (PA27) from Pseudomonas aeruginosa MH38

An organic solvent-stable alkaline hydrolase (PA27) from Pseudomonas aeruginosa MH38 was expressed, characterized, and immobilized for biotechnological applications. Recombinant PA27 was expressed in Escherichia coli as a 27 kDa soluble protein and was purified by standard procedures. PA27 was found to be stable at pH 8–11 and below 50 °C. It maintained more than 80% of its activity under alkaline conditions (pH 8.0–11.0). Furthermore, PA27 exhibited remarkable stability in benzene and n-hexane at concentrations of 30% and 50%. Based on these properties, immobilization of PA27 for biotechnological applications was explored. Scanning electron microscopy revealed a very smooth spherical structure with numerous large pores. Interestingly, immobilized PA27 displayed improved thermal/chemical stabilities and high reusability. Specifically, immobilized PA27 has improved thermal stability, maintaining over 90% of initial activity after 1 h of incubation at 80 °C, whereas free PA27 had only 35% residual activity. Furthermore, immobilized PA27 showed higher residual activity than the free enzyme biocatalysts against detergents, urea, and phenol. Immobilized PA27 could be recycled 20 times with retention of ~60% of its initial activity. Furthermore, macroscopic hydrogel formation of PA27 was also investigated. These characteristics make PA27 a great candidate for an industrial biocatalyst with potential applications.

A novel thermoalkalostable esterase from Acidicaldus sp. strain USBA-GBX-499 with enantioselectivity isolated from an acidic hot springs of Colombian Andes

Several thermo- and mesoacidophilic bacterial strains that revealed high lipolytic activity were isolated from water samples derived from acidic hot springs in Los Nevados National Natural Park (Colombia). A novel lipolytic enzyme named 499EST was obtained from the thermoacidophilic alpha-Proteobacterium Acidicaldus USBA-GBX-499. The gene estA encoded a 313-amino-acid protein named 499EST. The deduced amino acid sequence showed the highest identity (58 %) with a putative α/β hydrolase from Acidiphilium sp. (ZP_08632277.1). Sequence alignments and phylogenetic analysis indicated that 499EST is a new member of the bacterial esterase/lipase family IV. The esterase reveals its optimum catalytic activity at 55 °C and pH 9.0. Kinetic studies showed that 499EST preferentially hydrolyzed middle-length acyl chains (C6-C8), especially p-nitrophenyl (p-NP) caproate (C6). Its thermostability and activity were strongly enhanced by adding 6 mM FeCl3. High stability in the presence of water-miscible solvents such as dimethyl sulfoxide and glycerol was observed. This enzyme also exhibits stability under harsh environmental conditions and enantioselectivity towards naproxen and ibuprofen esters, yielding the medically relevant (S)-enantiomers. In conclusion, according to our knowledge, 499EST is the first thermoalkalostable esterase derived from a Gram-negative thermoacidophilic bacterium.

Lipase from marine strain using cooked sunflower oil waste: production optimization and application for hydrolysis and thermodynamic studies

The marine strain Pseudomonas otitidis was isolated to hydrolyze the cooked sunflower oil (CSO) followed by the production of lipase. The optimum culture conditions for the maximum lipase production were determined using Plackett-Burman design and response surface methodology. The maximum lipase production, 1,980 U/ml was achieved at the optimum culture conditions. After purification, an 8.4-fold purity of lipase with specific activity of 5,647 U/mg protein and molecular mass of 39 kDa was obtained. The purified lipase was stable at pH 5.0-9.0 and temperature 30-80 °C. Ca(2+) and Triton X-100 showed stimulatory effect on the lipase activity. The purified lipase was highly stable in the non-polar solvents. The functional groups of the lipase were determined by Fourier transform-infrared (FT-IR) spectroscopy. The purified lipase showed higher hydrolytic activity towards CSO over the other cooked oil wastes. About 92.3 % of the CSO hydrolysis was observed by the lipase at the optimum time 3 h, pH 7.5 and temperature 35 °C. The hydrolysis of CSO obeyed pseudo first order rate kinetic model. The thermodynamic properties of the lipase hydrolysis were studied using the classical Van't Hoff equation. The hydrolysis of CSO was confirmed by FT-IR studies.

Expression of IL-23, VEGF and TLR2/TLR4 on mononuclear cells after exposure to Pseudomonas aeruginosa

Pseudomonas aeruginosa is a Gram-negative, aerobic bacillus causing infections of the respiratory and other organ systems in susceptible hosts. Although it does not cause pulmonary infections in immunocompetent individuals, P. aeruginosa causes chronic lung infection in individuals with cystic fibrosis and nosocomial pneumonia resulting in significant morbidity and mortality. Exogenous administration of an important P. aeruginosa virulence factor, lipase, present in P. aeruginosa culture supernatant, induces potent mononuclear cell activation leading to the production of numerous proinflammatory cytokines. In particular, P. aeruginosa culture supernatant stimulated increased proliferation of THP-1 cells and monocytes (MN). The addition of culture supernatant to THP-1 cells and MN also induced Interleukin (IL)-23 and vascular endothelial growth factor (VEGF) release in a time-dependent manner. To investigate whether any compounds present in the supernatant lipase contributed to releasing IL-23 and VEGF, the culture supernatant from P. aeruginosa containing lipase was treated with hexadecylsulfonylfluoride (AMSF). The AMSF-treated culture supernatant (CS) did not show any induction on the IL-23 and VEGF release compared to the cells treated with CS without AMSF. We also showed that Toll-like receptors (TLR)2/TLR4 are expressed in THP-1 cells and MN treated with P. aeruginosa CS in a time-dependent fashion. Flow cytometry analysis revealed a higher TLR4 and a lower TLR2 expression at 48 and 72 h of treatment. The treatment of cells with TLR4 neutralizing antibody, and to a lesser extent with TLR2 neutralizing antibody, resulted in a decrease in P. aeruginosa CS-induced IL-23 and VEGF production.

Function and biotechnology of extremophilic enzymes in low water activity

Enzymes from extremophilic microorganisms usually catalyze chemical reactions in non-standard conditions. Such conditions promote aggregation, precipitation, and denaturation, reducing the activity of most non-extremophilic enzymes, frequently due to the absence of sufficient hydration. Some extremophilic enzymes maintain a tight hydration shell and remain active in solution even when liquid water is limiting, e.g. in the presence of high ionic concentrations, or at cold temperature when water is close to the freezing point. Extremophilic enzymes are able to compete for hydration via alterations especially to their surface through greater surface charges and increased molecular motion. These properties have enabled some extremophilic enzymes to function in the presence of non-aqueous organic solvents, with potential for design of useful catalysts. In this review, we summarize the current state of knowledge of extremophilic enzymes functioning in high salinity and cold temperatures, focusing on their strategy for function at low water activity. We discuss how the understanding of extremophilic enzyme function is leading to the design of a new generation of enzyme catalysts and their applications to biotechnology.

Production of lipase and protease from an indigenous Pseudomonas aeruginosa strain and their evaluation as detergent additives: compatibility study with detergent ingredients and washing performance

An indigenous Pseudomonas aeruginosa strain has been studied for lipase and protease activities for their potential application in detergents. Produced enzymes were investigated in order to assess their compatibility with several surfactants, oxidizing agents and commercial detergents. The crude lipase appeared to retain high activity and stability in the presence of several surfactants and oxidizing agents and it was insusceptible to proteolysis. Lutensol® XP80 and Triton® X-100 strongly activated the lipase for a long period (up to 40 and 30% against the control after 1h) while the protease activity was enhanced by the addition of Triton® WR1339 and Tween® 80. The washing performance of the investigated surfactants was significantly improved with the addition of the crude enzyme preparation. Studies were further undertaken to improve enzymes production. The optimization of fermentation conditions led to an 8-fold increase of lipase production, while the production of protease was enhanced by 60%.

A novel cold-adapted lipase, LP28, from a mesophilic Streptomyces strain

Fossil fuel is limited but its usage has been growing rapidly, thus the fuel is predicted to be completely running out and causing an unbearable global energy crisis in the near future. To solve this potential crisis, incorporating with increasing environmental concerns, significant attentions have been given to biofuel production in the recent years. With the aim of isolating a microbial biocatalyst with potential application in the field of biofuel, a lipase from Streptomyces sp. CS628, LP28, was purified using hydroxyapatite column chromatography followed by a gel filtration. Molecular weight of LP28 was estimated to be 32,400 Da by SDS-PAGE. The activity was the highest at 30 °C and pH 8.0 and was stable at pH 6.0-8.0 and below 25 °C. The enzyme preferentially hydrolyzed p-nitrophenyl decanoate (C10), a medium chain substrate. Furthermore, LP28 non-specifically hydrolyzed triolein releasing both 1,2- and 1,3-diolein. More importantly, LP28 manifestly catalyzed biodiesel production using palm oil and methanol; therefore, it can be a potential candidate in the field of biofuel.