Ring-opening polymerization of ɛ-caprolactone catalyzed by a novel thermophilic lipase from Fervidobacterium nodosum

Herbal active ingredient-loaded poly(ω-pentadecalactone-co-δ-valerolactone)/gelatin nanofibrous membranes

Recently, there has been an accelerating interest in novel biocompatible wound dressings made of nano-sized materials, especially nanofibers. Electrospun nanofibers provide high surface area and mimic the extracellular matrix which enhances biocompatibility. Besides, nanofibrous structures have high active ingredient loading capacity as a result of their high surface-to-volume ratio and porosity. In the present study, curcumin-loaded poly(ω-pentadecalactone-co-δ-valerolactone)/gelatin (PDL-VL/Gel) nanofibrous membranes were fabricated to be used for healing skin wounds. Poly(ω-pentadecalactone-co-δ-valerolactone) copolymer has been enzymatically synthesized in previous studies, thus it improves the originality of the membrane. It was aimed to obtain a synergetic effect and increase the novelty of the work by blending synthetic and natural polymers. Moreover, it was preferred to provide antibacterial activity by the incorporation of a herbal ingredient (curcumin) as a natural alternative to commercial antibiotics. Varied amounts of curcumin (5-25 %, w:v) were electrospun together with PDL-VL/Gel (equal volume ratio) polymer blend (fiber diameters ranged between 554 and 1074 nm) and several characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to examine the curcumin incorporation. Afterwards, in vitro curcumin release studies were carried out and mathematical modeling was applied to release data to clarify the transport mechanism. Curcumin release profiles comprised of an initial burst release in the first hour followed by a sustained release through 24 h. Based on the antibacterial activity test results, 15 % curcumin loading ratio was found to be sufficient for the treatment of skin wounds infected by Gram-negative (E. coli) and Gram-positive (S. aureus and B. subtilis) bacteria. Additionally, nanofibrous membranes did not lead to cytotoxicity, and curcumin content further enhanced the viability of fibroblasts. Thus, the presented antibacterial nanofibrous membrane is suggested to be applied for the treatment of wound infections and accelerating the healing process.

Exploiting Enzyme in the Polymer Synthesis for a Remarkable Increase in Thermal Conductivity

The interest in polymers with high thermal conductivity increased much because of their inherent properties such as low density, low cost, flexibility, and good chemical resistance. However, it is challenging to engineer plastics with good heat transfer characteristics, processability, and required strength. Improving the degree of the chain alignment and forming a continuous thermal conduction network is expected to enhance thermal conductivity. This research aimed to develop polymers with a high thermal conductivity that can be interesting for several applications. Two polymers, namely poly(benzofuran-co-arylacetic acid) and poly(tartronic-co-glycolic acid), with high thermal conductivity containing microscopically ordered structures were prepared by performing enzyme-catalyzed (Novozyme-435) polymerization of the corresponding α-hydroxy acids 4-hydroxymandelic acid and tartronic acid, respectively. A comparison between the polymer's structure and heat transfer obtained by mere thermal polymerization before and enzyme-catalyzed polymerization will now be discussed, revealing a dramatic increase in thermal conductivity in the latter case. The polymer structures were investigated by FTIR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy in liquid- and solid-state (ss-NMR), and powder X-ray diffraction. The thermal conductivity and diffusivity were measured using the transient plane source technique.

Enzyme catalyzes ester bond synthesis and hydrolysis: The key step for sustainable usage of plastics

Petro-plastic wastes cause serious environmental contamination that require effective solutions. Developing alternatives to petro-plastics and exploring feasible degrading methods are two solving routes. Bio-plastics like polyhydroxyalkanoates (PHAs), polylactic acid (PLA), polycaprolactone (PCL), poly (butylene succinate) (PBS), poly (ethylene furanoate) s (PEFs) and poly (ethylene succinate) (PES) have emerged as promising alternatives. Meanwhile, biodegradation plays important roles in recycling plastics (e.g., bio-plastics PHAs, PLA, PCL, PBS, PEFs and PES) and petro-plastics poly (ethylene terephthalate) (PET) and plasticizers in plastics (e.g., phthalate esters, PAEs). All these bio- and petro-materials show structure similarity by connecting monomers through ester bond. Thus, this review focused on bio-plastics and summarized the sequences and structures of the microbial enzymes catalyzing ester-bond synthesis. Most of these synthetic enzymes belonged to α/β-hydrolases with conserved serine catalytic active site and catalyzed the polymerization of monomers by forming ester bond. For enzymatic plastic degradation, enzymes about PHAs, PBS, PCL, PEFs, PES and PET were discussed, and most of the enzymes also belonged to the α/β hydrolases with a catalytic active residue serine, and nucleophilically attacked the ester bond of substrate to generate the cleavage of plastic backbone. Enzymes hydrolysis of the representative plasticizer PAEs were divided into three types (I, II, and III). Type I enzymes hydrolyzed only one ester-bond of PAEs, type II enzymes catalyzed the ester-bond of mono-ester phthalates, and type III enzymes hydrolyzed di-ester bonds of PAEs. Divergences of catalytic mechanisms among these enzymes were still unclear. This review provided references for producing bio-plastics, and degrading or recycling of bio- and petro-plastics from an enzymatic point of view.

Extremophilic lipases for industrial applications: A general review

With industrialization and development in modern science enzymes and their applications increased widely. There is always a hunt for new proficient enzymes with novel properties to meet specific needs of various industrial sectors. Along with the high efficiency, the green and eco-friendly side of enzymes attracts human attention, as they form a true answer to counter the hazardous and toxic conventional industrial catalyst. Lipases have always earned industrial attention due to the broad range of hydrolytic and synthetic reactions they catalyse. When these catalytic properties get accompanied by features like temperature stability, pH stability, and solvent stability lipases becomes an appropriate tool for use in many industrial processes. Extremophilic lipases offer the same, thermostable: hot and cold active thermophilic and psychrophilic lipases, acid and alkali resistant and active acidophilic and alkaliphilic lipases, and salt tolerant halophilic lipases form excellent biocatalyst for detergent formulations, biofuel synthesis, ester synthesis, food processing, pharmaceuticals, leather, and paper industry. An interesting application of these lipases is in the bioremediation of lipid waste in harsh environments. The review gives a brief account on various extremophilic lipases with emphasis on thermophilic, psychrophilic, halophilic, alkaliphilic, and acidophilic lipases, their sources, biochemical properties, and potential applications in recent decades.

Full-Atomistic Optimized Potentials for Liquid Simulations and Polymer Consistent Force Field Models for Biocompatible Shape-Memory Poly(ε-caprolactone)

Thermally induced shape memory poly(ε-caprolactone) (PCL)-based polymers are one of the most extensively researched families of biocompatible materials. They are degradable under physiological conditions and have high applicability in general biomedical engineering, with cross-linked PCL networks being particularly useful for tissue engineering. In this study, we used the optimized potentials for liquid simulations (OPLS) force field, which is well suited for describing intermolecular interactions in biomolecules, and the class II polymer consistent force field (PCFF) to investigate the properties of telechelic PCL with diacrylates as reactive functionalities on its end groups. PCFF has been specifically parameterized for simulating synthetic polymeric materials. We compare the findings of all-atom molecular dynamics simulations with known experimental data and theoretical assumptions to verify the applicability of both these force fields. We estimated the melt density, volume, transition temperatures, and mechanical characteristics of two-branched PCL diacrylates with a molecular weight of 2481 Da. Our findings point to the utility of the aforementioned force fields in predicting the properties of PCL-based polymers. It also opens avenues for developing PCL cross-linked polymer models and employing OPLS to investigate the interactions of synthetic polymers with biomolecules.

Electrospun poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan ternary nanofibers with antibacterial activity for treatment of skin infections

In recent years, there is an increasing attention on biocompatible electrospun nanofibers for drug delivery applications since they provide high surface area, controlled and sustained drug release, and they mimic the extracellular matrix. In the present study, tetracycline hydrochloride (TCH) antibiotic loaded poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan nanofibrous membranes were fabricated as a controlled drug delivery system. Poly(ω-pentadecalactone-co-ε-caprolactone) copolymer has been enzymatically synthesized in previous studies, thus it provides an originality to the membrane. Combination of a synthetic polymer, a protein, and a polysaccharide in order to obtain a synergetic effect is another novelty of this work and there exists limited examples for such electrospun membrane. Varied amounts of TCH was electrospun together with poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin/chitosan (50/40/10 vol ratio) polymer blend (fiber diameters ranged between 85.7-225.2 nm) and several characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to examine the drug incorporation. Subsequently, in vitro drug release studies were conducted and mathematical modeling was applied for the detection of transport mechanism of drug. TCH release proceeded 14 days through an initial burst release in first hour and followed by a sustained release. 1% TCH-loaded sample was shown as optimal preparation with 96.5% total drug release and 11.8% initial burst release. TCH-loaded preparations demonstrated a good antibacterial activity against Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria and a limited effect (no inhibition zone observed below 3% TCH concentration) against Gram-negative (Escherichia coli) bacterium. Thus, TCH concentrations of ≥ 3% could be preferred to obtain a wide-spectrum effectiveness. The presented drug delivery system is suggested to be applied for treatment of skin infections as a wound dressing device.

Controlled release of tetracycline hydrochloride from poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin nanofibers

Development of drug delivery systems is an extensively researched area in biomedical field. In recent years, there is an increasing interest on fabrication of biocompatible nanofibrous drug delivery systems. In the present study, poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin nanofibrous membranes were fabricated for the controlled delivery and release of tetracycline hydrochloride (TCH) antibiotic. Poly(ω-pentadecalactone-co-ε-caprolactone) content provides an originality to the membrane, since it has been synthesized enzymatically previously. Varied amounts of tetracycline hydrochloride including poly(ω-pentadecalactone-co-ε-caprolactone)/gelatin (1:1, v:v) binary polymer blend was electrospun and characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to investigate the incorporation of drug molecule. Afterwards, in vitro drug release studies were carried out and mathematical modelling was applied to drug release data in order to clarify the transport mechanism of drug. TCH release profile comprised of an initial burst release in first hour and followed by a sustained release through 14 days which allowed sufficient antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria. The presented drug delivery system may be applied as an antibacterial wound dressing device for skin infections.

Fabrication and characterization of electrospun biopolyester/gelatin nanofibers

Poly(ω-pentadecalactone-co-ε-caprolactone) copolymer (PDL-CL) is an enzymatically synthesized aliphatic biopolyester, which has been participated in a nanofibrous structure for the first time. Electrospinning of this synthetic polymer by blending with a natural polymer such as gelatin (Gel) could provide new characteristics that are significant for biomedical applications, such as drug delivery, wound healing, and tissue engineering. In the present study, PDL-CL/Gel nanofibrous membranes were successfully produced and characterized. The average diameter of nanofibers was 305.0 ± 45.5 nm that may be beneficial in applications mentioned above. In order to increase hydrolytic resistance, cross-linking with glutaraldehyde vapor was applied. Cross-linking for 2 h was enough to obtain a nanofibrous membrane that was able to resist in pH 7.4 phosphate buffered saline for 30 days. In addition, contact angle measurement results had shown that, cross-linked nanofibrous membrane had good wettability, which is a required specification to be applied in biomedical field. Hence, this study provides an overview on fabrication of fine PDL-CL/Gel nanofibers, which may have potential to be used in biomedical area.

Recent advances in the synthesis of biodegradable polyesters by sustainable polymerization: lipase-catalyzed polymerization

Over the past three decades, enzymatic polymerization has dramatically developed and gradually broadened as a creative methodology in the construction of polymeric materials with tailor-made structures and properties. Compared with transition metal catalyst polymerizations, enzymatic polymerization is more attractive in the biomedicine field due to the metal-free residue, good biocompatibility, and few by-products. Meanwhile, enzymatic polymerization has far more activity towards macrolides. In this review, the synthesis of lipase-catalyzed polymer materials is systematically summarized, focusing on the synthesis of the complex and well-defined polymers. The enzymatic polyester synthesis was then discussed concerning the different reaction types, including ring-opening polymerization, polycondensation, a combination of ring-opening polymerization with polycondensation, and chemoenzymatic polymerization. Besides, exploration of novel biocatalysts and reaction media was also described, with particular emphasis on the enzymes obtained via immobilization or protein engineering strategies, green solvents, and reactors. Finally, recent developments in catalytic kinetics and mechanistic studies through the use of spectroscopy, mathematics, and computer techniques have been introduced. Besides, we addressed the remaining central issues in enzymatic polymerization and discussed current studies aimed at providing answers.

Production optimization, characterization, and covalent immobilization of a thermophilic Serratia rubidaea lipase isolated from an Algerian oil waste

A new thermophilic non-induced lipase producer named Serratia rubidaea strain Nehal-mou was isolated from oil waste in Tissemsilat, Algeria. The most influential lipase production parameters were screened by the Plackett-Burman design for enhancing enzyme yield. An optimum condition of a 1.5% of glucose, a 0.01% of potassium, and a 0.025% of manganese contents resulted in a 41.13 U/mL. This yield was 6.29 times higher than the one achieved before the application of the Box-Behnken Design. Lipase activity showed a high organic solvent tolerance following its exposure to hexane, ethanol, methanol, and acetone. Lipase was also perfectly stable in the presence of 10 mM Fe²⁺, K⁺, and Na⁺ ions with more than 75% of the retaining activity. The enzyme half-life times were 22 h, 90 min, and 25 min at 50, 60, and 70 °C respectively. Polyvinyl alcohol (PVA)/boric acid/Starch/CaCO₃ were utilized as a carrier for lipase covalent immobilization in order to be used efficiently. The Scanning Electron Microscopy (SEM) Technique and the Fourier Transform Infrared Spectroscopy (FTIR) Method confirmed the covalent bonding success and the excellent carrier characteristics. Thus, the immobilization yield reached 73.5% and the optimum temperature was shifted from 40 to 65 °C. The immobilized lipase kept 80% of its total activity after 10 cycles and had 3 and 3.2-fold half-lives at 70, and 80 °C respectively compared to the free enzyme.

Enzymatic synthesis of selenium-containing amphiphilic aliphatic polycarbonate as an oxidation-responsive drug delivery vehicle

Although functional aliphatic polycarbonates (APCs) have attracted prominent research interest as stimuli-responsive biomaterials, the majority of functional APCs are fabricated by detrimental organometallic catalysts or organo-catalysts. Herein, a facile synthetic strategy based on enzymatic polymerization was developed to construct a selenium-containing amphiphilic aliphatic polycarbonate (mPEG-b-CMP₄₅). Specifically, the selenium in its backbone framework underwent a hydrophobic–hydrophilic transition upon exposure to the abnormal ROS level of the tumor, thus providing a promising platform for ROS-triggered drug release. This amphiphilic mPEG-b-CMP₄₅ efficiently encapsulated doxorubicin (DOX) via self-assembly in aqueous solution and showed an excellent ability to regulate the release of DOX in response to H₂O₂ at biologically relevant concentrations (100 μM). These DOX-loaded nanoparticles could easily be internalized into U87 cells and possess the inherent antitumor properties of DOX, while they exhibited much lower cytotoxicity in normal cells HL-7702. Moreover, in many cases, the introduction of selenium caused high cytotoxicity of the materials, but the cytotoxicity results in HL-7702 cells demonstrated the good biocompatibility of mPEG-b-CMP₄₅. These collective data suggested the potential use of mPEG-b-CMP₄₅ as a biocompatible and smart drug delivery vehicle.

A facile synthetic strategy based on enzymatic polymerization was developed to construct a ROS-responsive polycarbonate served as biocompatible drug vehicle.

Lipase-mediated direct in situ ring-opening polymerization of ε-caprolactone formed by a chemo-enzymatic method

A novel method to synthesize poly(ε-caprolactone) (PCL) through a three-step, lipase-mediated chemo-enzymatic reaction from cyclohexanone using an immobilized lipase from Trichosporon laibacchii (T. laibacchii) CBS5791 was developed. The immobilized preparation with 1280 U· g^-1 used here was obtained by a method of purification and in situ immobilization where the crude intracellular lipase (cell homogenate) was subjected to partial purification by an aqueous two-phase system (ATPS) consisting of 12% (w/w) polyethylene glycol (PEG) 4000 and 13% (w/w) potassium phosphate (K₂HPO₄) and then in situ immobilization directly on diatomite from the top PEG-rich phase of ATPS. In this multi-step process, the ε-caprolactone (ε-CL) produced by lipase-mediated one-pot two-step chemo-enzymatic oxidation of cyclohexanone was directly subjected to in situ ring-opening polymerization (ROP) started by adding highly hydrophobic solvents. It is necessary to note that ε-CL synthesis and its subsequent ROP were catalyzed by the same lipase. The impact of various reaction parameters, e.g., solvent, cyclohexanone: hydrogen peroxide molar ratio, hydrogen peroxide forms and reaction temperature were investigated. Toluene was selected as a preferred solvent due to supporting the highest molecular weight (M_n = 2168) and moderate ε-CL conversion (65.42%). Through the optimization of reaction conditions, PCL was produced with a M_n of 2283 at 50 °C for 24 h. These results reveal that this lipase-mediated direct ring-opening polymerization of in situ formed ε-CL is an alternative route to the conventional synthesis of PCL.

Enzymatic synthesis and characterization of polycaprolactone by using immobilized lipase onto a surface-modified renewable carrier

In the present study, rice husk ash, which is a renewable and abundant material, was utilized as a carrier for lipase immobilization for the first time. Poly (ε-caprolactone) synthesis was successfully achieved by the new enzymatic catalyst: Candida antarctica lipase B immobilized onto surface-modified rice husk ashes by covalent binding. It was aimed to obtain optimum polymerization conditions at which highest molecular weight was reached and characterize the polymer produced. Moreover, thermal stability and effectiveness of the new biocatalyst in non-aqueous media were also shown with successful polymerization reactions. In addition, by using the new enzyme preparation, ε-caprolactone was able to be polymerized even at 30°C, which was promising for an energy saving process. Consequently, this work provides a new alternative route for poly (ε-caprolactone) synthesis.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.

Synthesis of hyperbranched polymers and their applications in analytical chemistry

This review focuses primarily on the recent developments in the synthesis of hyperbranched polymers and their application in analytical chemistry.

Glutaraldehyde cross-linking of immobilized thermophilic esterase on hydrophobic macroporous resin for application in poly(ε-caprolactone) synthesis

The immobilized thermophilic esterase from Archaeoglobus fulgidus was successfully constructed through the glutaraldehyde-mediated covalent coupling after its physical adsorption on a hydrophobic macroporous resin, Sepabeads EC-OD. Through 0.05% glutaraldehyde treatment, the prevention of enzyme leaching and the maintenance of catalytic activity could be simultaneously realized. Using the enzymatic ring-opening polymerization of ε-caprolactone as a model, effects of organic solvents and reaction temperature on the monomer conversion and product molecular weight were systematically investigated. After the optimization of reaction conditions, products were obtained with 100% monomer conversion and M_n values lower than 1010 g/mol. Furthermore, the cross‑linked immobilized thermophilic esterase exhibited an excellent operational stability, with monomer conversion values exceeding 90% over the course of 12 batch reactions, still more than 80% after 16 batch reactions.

Ultrasound-Assisted Enzymatic Synthesis of Poly-ε-Caprolactone: Kinetic Behavior and ReactorDesign

Lipase-mediated, ultrasound-assisted synthesis of poly-ε-caprolactone was investigated. It was found that ultrasound irradiation helped to improve the rate constant of poly-ε-caprolactone chain propagation (kp) at high initial monomer (ε-caprolactone) concentration. The enhancement of kp ranged from 34% to 46% at 22.5–18.0 M initial monomer concentration, respectively. In a system proned to time-dependent mass-transfer limitation due to polymer chain extension, the acoustic effects could have also allowed the reaction to continue longer compared to non-sonicated process until it became impossible at highly elevated reaction mixture viscosity(>2,000 times increase from initial viscosity). Consequently, it also helped to improve monomer conversion. In a continuous flow polymerization system, a plug flow reactor system is recommended due to its lowest volume for maximum conversion compared to a continuously stirred tank reactor system.