Improved yield and stability of amylase by multipoint covalent binding on polyglutaraldehyde activated chitosan beads: Activation of denatured enzyme molecules by calcium ions

Enhancement of stability and activity of RSD amylase from Paenibacillus lactis OPSA3 for biotechnological applications by covalent immobilization on green silver nanoparticles

The key challenge to the biotechnological applications of amylases is achieving high activity and stability under extreme pH, temperature and often high levels of enzyme denaturants. This study immobilized a novel raw starch-digesting (RSD) amylase from Paenibacillus lactis OPSA3 on glutaraldehyde-activated silver nanoparticles. Effects of time, glutaraldehyde concentration, pH, temperature, and enzyme concentration on immobilization were studied, and the immobilized enzymes were characterized. pH 9.0 was optimum for the enzyme immobilization. The maximum immobilization efficiency of 82.23 ± 7.99 % was achieved at 25 °C for 120 min. After immobilization, the optimum pH and temperature changed from 9.0 to 11.0 and 60 to 70, respectively. Immobilization reduced the amylase's activation energy (KJ/mol) from the initial 58.862 to 45.449 following immobilization. The Km of the amylase decreased after immobilization, while the Vmax increased. The immobilized amylase showed significantly greater storage and thermal stability than the free amylase. At 80, enzyme half-life (min) and D value (min) increased from 12.33 to 179.11 and 40.94 to 594.98, respectively. The immobilized amylase (80-88 %) had more stability to the effects of the studied surfactants than the free enzyme. It also showed improved stability in the presence of commercial detergents compared to the free enzyme. The amylase's enhanced kinetic parameters and stability following successful immobilization on silver nanoparticles indicate its potential for application in the range of biotechnological processes where alkaline- and temperature-stable amylases are employed.

Cross-linked enzyme aggregates of polyethylene terephthalate hydrolyse (PETase) from Ideonella sakaiensis for the improvement of plastic degradation

Polyethylene terephthalate (PET) is one of the most produced plastics globally and its accumulation in the environment causes harm to the ecosystem. Polyethylene terephthalate hydrolyse (PETase) is an enzyme that can degrade PET into its monomers. However, free PETase lacks operational stabilities and is not reusable. In this study, development of cross-linked enzyme aggregate (CLEA) of PETase using amylopectin (Amy) as cross-linker was introduced to solve the limitations of free PETase. PETase-Amy-CLEA exhibited activity recovery of 81.9 % at its best immobilization condition. Furthermore, PETase-Amy-CLEA exhibited 1.37-, 2.75-, 2.28- and 1.36-fold higher half-lives than free PETase at 50 °C, 45 °C, 40 °C and 35 °C respectively. Moreover, PETase-Amy-CLEA showed broader pH stability from pH 5 to 10 and could be reused up to 5 cycles. PETase-Amy-CLEA retained >70 % of initial activity after 40 days of storage at 4 °C. In addition, lower Km of PETase-Amy-CLEA indicated better substrate affinity than free enzyme. PETase-Amy-CLEA corroded PET better and products yielded was 66.7 % higher than free PETase after 32 h of treatment. Hence, the enhanced operational stabilities, storage stability, reusability and plastic degradation ability are believed to make PETase-Amy-CLEA a promising biocatalyst in plastic degradation.

Kinetic/thermodynamic study of immobilized β-fructofuranosidase from Aspergillus tamarii URM4634 in chitosan beads and application on invert sugar production in packed bed reactor

β-fructofuranosidase (FFase) from Aspergillus tamarii URM4634 was immobilized covalently in chitosan beads. It was characterized biochemically, studied in terms of kinetic and thermodynamic parameters, and applied on conversion of sucrose for invert sugar production in a packed bed reactor (PBR). The optimum reactional conditions were determined and obtained at pH 5.0 and 60 °C. FFase was thermostable at 50-55°C. At 50°C, the enzyme shows longer half-life (t_1/2) (594.13 min) and a higher D-value (1,973.64 min). This indicates that immobilized FFase was stable at temperature commonly used in invert sugar production. The following thermodynamic parameters were obtained: activation energy (E*_d = 301.57 kJ mol^-1), enthalpy (298.76 ≤ ΔH*_d ≤ 298.89 kJ mol^-1), entropy (579.88 ≤ ΔS*_d ≤ 589.27 J K^-1 mol^-1) and Gibbs free energy (100.29 ≤ ΔG*_d ≤ 108.47 kJ mol^-1). The high E*_d, ΔH*_d and ΔG*_d values confirmed FFase thermostability. The high and positive values for ΔS*_d indicate an increase in disorder due opening of the enzyme structure. The sucrose hydrolysis in PBR showed a maximum invert sugar yield (96.0%) at 15 min of operation. The hydrolysis process remained efficient up to 100 min (70.22%). The results obtained in the present study provide a good indication that immobilized FFase on chitosan beads in PBR is efficient to invert sugar production for food industry.

Enhancement of the Anti-inflammatory Effect of Bromelain by Its Immobilization on Probiotic Spore of Bacillus cereus

The therapeutic application of bromelain is limited due to its sensitivity to operating conditions such as high acidity, gastric proteases in the stomach juice, chemicals, organic solvents and elevated temperature. We hypothesized that bromelain immobilized on probiotic bacterial spores would show enhanced therapeutic activity through possible synergistic or additive effects. In this study, the oedema inhibition potential of bromelain immobilized on probiotic Bacillus spores was compared to the free enzyme using the carrageenan paw oedema model with Wistar rats. In batch A rats (carrageenan-induced inflammation 30 min after receiving oral treatments), group 7 rats treated with a lower dose of spore-immobilized bromelain suspension showed the highest oedema inhibition, 89.20 ± 15.30%, while group 4 treated with a lower dose of free bromelain had oedema inhibition of 60.25 ± 13.00%. For batch B rats (carrageenan-induced inflammation after receiving oral treatment for three days), group 7 rats treated with a lower dose of spore-immobilized bromelain suspension showed higher inhibition percentage (81.94 ± 8.86) than group 4 treated with a lower dose of free bromelain (78.45 ± 4.46) after 24 h. Our results showed that used alone, the enzyme and the spores produced oedema inhibition and improved the motility of the rats. The spore-immobilized bromelain formulation performed approximately 0.9-fold better than the free bromelain and the free spores at the lower evaluated dose.

Stabilizing enzymes by immobilization on bacterial spores: A review of literature

The ever-increasing applications of enzymes are limited by the relatively poor performance in harsh processing conditions. As a result, there are constant innovations in immobilization protocols for improving biocatalyst activity and stability. Bacterial spores are cheap to generate and highly resistant to environmental stress. The spore core is sheathed by an inner membrane, the germ cell wall, the cortex, outer membrane, spore coat and in some species the exosporium. The spore surface is anion-rich, hydrophobic and contains several reactive groups capable of interacting and stabilizing enzyme molecules through electrostatic forces, hydrophobic interactions and covalent bonding. The probiotic nature of spores obtained from non-toxic bacterial species makes them suitable carriers for the enzyme immobilization, especially food-grade enzymes or those intended for therapeutic use. Immobilization on spores is by direct adsorption, covalent attachment or surface display during the sporulation phase. Hindrances to the immobilization on spore matrix include the production rates, operational instability, and reduced catalytic properties due to conformational changes in enzyme. This paper reviews bacterial spore as a heterofunctional support matrix gives reasons why probiotic bacillus spores are better options and the diverse technologies adopted for spore-enzyme immobilization. It further suggests directions for future use and discusses the commercialization prospects.

Stability evaluation of 6-phosphogluconate dehydrogenase immobilized on amino-functionalized magnetic nanoparticles

In this study, 6-phosphogluconate dehydrogenase was covalently immobilized onto the N-2-aminoethyl-3-aminopropyltriethoxysilane (APTES) modified core-shell Fe₃O₄@SiO₂ magnetic nanoparticles (ASMNPs) using glutaraldehyde (GA). Immobilization of 6PGDH on ASMNPs was confirmed using fourier transform-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) analysis. The NADP⁺ conversion ratio, the reusability, thermal, and storage stability of the immobilized 6PGDH were determined and compared with those of the free enzyme. The maximum retention of enzyme activity reached to 96% when the enzyme was immobilized on ASMNPs activated with monomer form of GA. Although the thermal stability of free and immobilized enzymes was similar, at 30 °C, the immobilized 6PGDH showed the improved thermal stability at 40 °C and 50 °C compared with free 6PGDH. While the free 6PGDH only converted 33% of NADP⁺ in reaction medium upon 480 s, the immobilized 6PGDH performed 56% conversion of NADP⁺ at same time. The immobilized 6PGDH retained 62% of its initial activity up to the fifth cycle and 35% of its initial activity after 22 days of storage at 4 °C.

Effect of magnetic field on the Eversa® Transform 2.0 enzyme: Enzymatic activity and structural conformation

Alternatives to improve the stability and activity of enzymes have been rising in the last years due to the potential industrial application of these catalysts. However, the enzymes characteristics in terms of stability and catalytic efficiency can reduce, in some cases, due to the reaction conditions. Due to a lack in the literature concerning structural information related to the new commercial Eversa® Transform 2.0 enzyme (NS-40116) we investigated the conformational structure by spectroscopic and mass spectrometry techniques after exposure in permanent magnetic flux density (0.7 and 1.34 T) in recirculation mode (1, 2, and 4 h) at 0.06 L·min^-1. The influence of pH on the enzymatic solution associated with the magnetic flux (pH 5, 7, and 9) was also evaluated. Under the best reaction condition (pH 7 after 4 h in a recirculation mode at 1.34 T), enzyme activity 77% higher than the control sample was obtained. Mass spectrometry techniques showed changes in the NS-40116 tertiary structure. Thus, the application of magnetic fields as an enzymatic pre-treatment showed to be a promising technique and a viable alternative to increase the enzymatic activity since it is a low cost, environmentally friendly, and ease operation process.

Development of thermostable amylase enzyme from Bacillus cereus for potential antibiofilm activity

The marine bacterial strain Bacillus cereus was used to produce amylase enzyme and has excellent alkali-stable and thermostable enzymatic activity. The combined effects of pH, temperature and incubation time on amylase activity were studied using response surface methodology. The amylase enzyme activity was also determined in the presence of various metal ions, chelating agents, detergents and the results showed that the maximum enzyme activity was observed in the presence of calcium chloride (96.1%), EDTA (63.4%) and surf excel (90.6%). The amylase enzyme exhibited excellent antibiofilm activity against marine derived biofilm forming bacteria Pseudomonas aeruginosa and Staphylococcus aureus in microtiter plate assay and congo red assay. Light and confocal laser scanning microscopic (CLSM) analysis were also used to confirm the potential biofilm activity of amylase enzyme. The CLSM analysis showed the inhibition of complete biofilm formation on amylase enzyme treated glass surface. Further in vivo toxicity analysis of amylase enzyme was determined against marine organisms Dioithona rigida and Artemia salina. The results showed that there is no morphological changes were observed due to the minimal toxicity of amylase enzyme. Overall these findings suggested that marine bacterial derived amylase enzyme could be developed as potential antibiofilm agent.

Bienzymatic Sequential Reaction on Microgel Particles and Their Cofactor Dependent Applications

We report, the preparation and characterization of bioconjugates, wherein enzymes pyruvate kinase (Pk) and l-lactic dehydrogenase (Ldh) were covalently bound to poly(N-isopropylacrylamide)-poly(ethylenimine) (PNIPAm-PEI) microgel support using glutaraldehyde (GA) as the cross-linker. The effects of different arrangements of enzymes on the microgels were investigated for the enzymatic behavior and to obtain maximum Pk-Ldh sequential reaction. The dual enzyme bioconjugates prepared by simultaneous addition of both the enzymes immobilized on the same microgel particles (PL), and PiLi, that is, dual enzyme bioconjugate obtained by combining single-enzyme bioconjugates (immobilized pyruvate kinase (Pi) and immobilized lactate dehydrogenase (Li)), were used to study the effect of the assembly of dual enzymes systems on the microgels. The kinetic parameters (Km, kcat), reaction parameters (temperature, pH), stability (thermal and storage), and cofactor dependent applications were studied for the dual enzymes conjugates. The kinetic results indicated an improved turn over number (kcat) for PL, while the kcat and catalytic efficiency was significantly decreased in case of PiLi. For cofactor dependent application, in which the ability of ADP monitoring and ATP synthesis by the conjugates were studied, the activity of PL was found to be nearly 2-fold better than that of PiLi. These results indicated that the influence of spacing between the enzymes is an important factor in optimization of multienzyme immobilization on the support.

Evaluating effective factors on the activity and loading of immobilized α-amylase onto magnetic nanoparticles using a response surface-desirability approach

The effects of different operational conditions of α-amylase covalent immobilization on magnetic nanoparticles were investigated using a central composite design.