Efficient enantioseparation of phenylsuccinic acid enantiomers by aqueous two-phase system-based biphasic recognition chiral extraction: Phase behaviors and distribution experiments

Recent progress on chiral extractants for enantioselective liquid-liquid extraction

As the demand for enantiopure compounds increases, chiral separation has become increasingly important in many fields. Enantioselective liquid-liquid extraction is an up-and-coming technology for enantiomeric separation because it is highly efficient and easy to be scaled up. The key factor for enantioselective liquid-liquid extraction is the development of novel chiral extractants with high enantiorecognition performance. With successful studies on catalytically active metal complexes as chiral extractants, novel chiral extractants can be screened and designed from the field of asymmetric catalysis. Chiral ionic liquids, sulfobutylether-β-cyclodextrins bonded magnetic nanoparticles and 2,2',3,3'-tetrahydro-1,1'-spirobi[indene]-7,7'-diol (SPINOL) based phosphoric acid host show unique potential ability in enantioselective liquid-liquid extraction and they deserve further study. Brief principles, extraction equipment and solvent systems in enantioselective liquid-liquid extraction are presented in the present paper, and recent progress in development of new chiral extractants in the past decade is mainly reviewed, including metal complexes, cyclodextrins, ionic liquids, tartrate acids and crown ethers.

Efficient Purification of Nuclease P1 from Penicillium citrinum Using Polyethylene Glycol/Disodium Guanosine Monophosphate Aqueous Two-Phase System

Nuclease P1 (NP1) can hydrolyze nucleic acids into four 5'-mononucleotides, which are widely used in the pharmaceutical and food industries. In this paper, an aqueous two-phase system (ATPS) was developed to purify NP1 from Penicillium citrinum. Polyethylene glycol (PEG) and nucleotides salts were studied to form ATPSs, among which PEG3000/disodium guanosine monophosphate (GMPNa₂) was researched, including the phase composition and pH. Using 14% (w/w) PEG3000 and 20% (w/w) GMPNa₂ ATPS at pH 5.0, the best recovery and purification factor, 82.4% and 3.59, were obtained. The recovery of NP1 was 98.3% by the separation of ultrafiltration from the PEG-rich phase. The recycling use of GMPNa₂ was also studied, and 95.1% of GMPNa₂ in the salt-rich phase was obtained with the addition of ethanol as the solvent. These results showed that the ATPS was effective for purification of NP1.

Chiral Ionic Liquids: Structural Diversity, Properties and Applications in Selected Separation Techniques

Ionic liquids (ILs) are chemical compounds composed of ions with melting points below 100 °C exhibiting a design feature. ILs are commonly used as the so-called green solvents, reagents or highly efficient catalysts in varied chemical processes. The huge application potential of ionic liquids (IL) justifies the growing interest in these compounds. In the last decade, increasing attention has been devoted to the development of new methods in the synthesis of stable chiral ionic liquids (CILs) and their application in various separation techniques. The beginnings of the successful use of CILs to separate enantiomers date back to the 1990 s. Most chiral ILs are based on chiral cations or chiral anions. There is also a limited number of CILs possessing both a chiral cation and a chiral anion. Due to the high molecular diversity of both ions, of which at least one has a chiral center, we have the possibility to design a large variety of optically active structures, thus expanding the range of CIL applications. Research utilizing chiral ionic liquids only recently has become more popular. However, it is the area that still has great potential for future development. This review aimed to describe the diversity of structures, properties and examples of applications of chiral ionic liquids as new chiral solid materials and chiral components of the anisotropic environment, providing chiral recognition of enantiomeric analytes, which is useful in liquid chromatography, countercurrent chromatography and other various CIL-based extraction techniques including aqueous biphasic (ABS) extraction systems, solid-liquid two-phase systems, liquid-liquid extraction systems with hydrophilic CILs, liquid-liquid extraction systems with hydrophobic CILs, solid-phase extraction and induced-precipitation techniques developed in the recent years. The growing demand for pure enantiomers in the pharmaceutical and food industries sparks further development in the field of extraction and separation systems modified with CILs highlighting them as affordable and environmentally friendly both chiral selectors and solvents.

β-Cyclodextrin-Immobilized Ni/Graphene Electrode for Electrochemical Enantiorecognition of Phenylalanine

In this work, a Ni/graphene (Ni/G) electrode was designed and fabricated by plasma-enhanced chemical vapor deposition (PECVD) for the ultrasensitive recognition of d- and l-phenylalanine. Through a single-step PECVD process, the Ni/G electrode can achieve better hydrophilicity and larger catalytic surface area, which is beneficial for the electrochemical recognition of bio-objects. After surface modification with β-cyclodextrin, the Ni/G electrode can distinguish d-phenylalanine from l-phenylalanine according to a 0.09 V peak shift in differential pulse voltammetry tests. Moreover, this Ni/G electrode achieved a detection limit as low as 1 nM and a wide linear range from 1 nM to 10 mM toward l-phenylalanine, with great storage stability and working stability.

The development of biphasic chiral recognition in chiral separation

In chiral separation, enantioseparation factor is an important parameter which influences the resolution of enantiomers. In this current overview, a biphasic chiral recognition method is introduced to the readers. This method can significantly improve the enantioseparation factor in two-phase solvent through adding lipophilic and hydrophilic chiral selectors which have opposite chiral recognition ability to organic and aqueous phases, respectively. This overview presents the development and applications of biphasic chiral recognition in liquid-liquid extraction and counter current chromatography. It mainly focuses on the topics of mechanism, advantages and limitations, applications, and key factors of biphasic chiral recognition. In addition, the future outlook on development of biphasic chiral recognition also has been discussed in this overview.

Enantioselective extraction of phenylsuccinic acid in aqueous two-phase systems based on acetone and β-cyclodextrin derivative: Modeling and optimization through response surface methodology

A novel aqueous two-phase system (ATPS) composed of β-cyclodextrin (β-CD) derivative and acetone was developed for enantioselective extraction of racemic phenylsuccinic acid (PSA). Binodal curves, tie-lines, and critical points for the investigated ATPS were determined and the experimental tie-lines data were successfully correlated by Othmer-Tobias, Bancroft, and Setschenow-type equations. ATPS containing sulfobutyl ether-β-CD (SBE-β-CD) exhibited better enantioselectivity than that using carboxymethyl-β-CD (CM-β-CD). To optimize enantioselective partitioning conditions of PSA in acetone/SBE-β-CD ATPS, three factors (PSA concentration, pH, and equilibrium temperature) were analyzed by using central composite design in response surface methodology. The calculated equilibrium constants of inclusion complexation are 1638.64M^-1 for SBE-β-CD-(R)-PSA and 835.84M^-1 for SBE-β-CD-(S)-PSA, respectively. Under the optimized conditions, the separation factor of 3.14 and high enrichment efficiency (E_R=98.06%, E_S=99.25%) were simultaneously achieved in a single step.

Extraction and characterization of polysaccharides from Semen Cassiae by microwave-assisted aqueous two-phase extraction coupled with spectroscopy and HPLC

A novel and rapid method for simultaneous extraction and separation of the different polysaccharides from Semen Cassiae (SC) was developed by microwave-assisted aqueous two-phase extraction (MAATPE) in a one-step procedure. Using ethanol/ammonium sulfate system as a multiphase solvent, the effects of MAATPE on the extraction of polysaccharides from SC such as the composition of the ATPS, extraction time, temperature and solvent-to-material ratio were investigated by UV-vis analysis. Under the optimum conditions, the yields of polysaccharides were 4.49% for the top phase, 8.80% for the bottom phase and 13.29% for total polysaccharides, respectively. Compared with heating solvent extraction and ultrasonic assisted extraction, MAATPE exhibited the higher extraction yields in shorter time. Fourier-transform infrared spectra showed that two polysaccharides extracted from SC to the top and bottom phases by MAATPE were different from each other in their chemical structures. Through acid hydrolysis and PMP derivatization prior to HPLC, analytical results by indicated that a polysaccharide of the top phases was a relatively homogeneous homepolysaccharide composed of dominant gucose glucose while that of the bottom phase was a water-soluble heteropolysaccharide with multiple components of glucose, xylose, arabinose, galactose, mannose and glucuronic acid. Molar ratios of monosaccharides were 95.13:4.27:0.60 of glucose: arabinose: galactose for the polysaccharide from the top phase and 62.96:14.07:6.67: 6.67:5.19:4.44 of glucose: xylose: arabinose: galactose: mannose: glucuronic acid for that from the bottom phase, respectively. The mechanism for MAATPE process was also discussed in detail. MAATPE with the aid of microwave and the selectivity of the ATPS not only improved yields of the extraction, but also obtained a variety of polysaccharides. Hence, it was proved as a green, efficient and promising alternative to simultaneous extraction of polysaccharides from SC.