Dilute alkaline pretreatment for reducing sugar production from Tetraselmis suecica and Chlorella sp. biomass

A comprehensive review on versatile microalga Tetraselmis: Potentials applications in wastewater remediation and bulk chemical production

Microalgae are considered sustainable resources for the production of biofuel, feed, and bioactive compounds. Among various microalgal genera, the Tetraselmis genus, containing predominantly marine microalgal species with wide tolerance to salinity and temperature, has a high potential for large-scale commercialization. Until now, Tetraselmis sp. are exploited at smaller levels for aquaculture hatcheries and bivalve production. However, its prolific growth rate leads to promising areal productivity and energy-dense biomass, so it is considered a viable source of third-generation biofuel. Also, microbial pathogens and contaminants are not generally associated with Tetraselmis sp. in outdoor conditions due to faster growth as well as dominance in the culture. Numerous studies revealed that the metabolite compositions of Tetraselmis could be altered favorably by changing the growth conditions, taking advantage of its acclimatization or adaptation ability in different conditions. Furthermore, the biorefinery approach produces multiple fractions that can be successfully upgraded into various value-added products along with biofuel. Overall, Tetraselmis sp. could be considered a potential strain for further algal biorefinery development under the circular bioeconomy framework. In this aspect, this review discusses the recent advancements in the cultivation and harvesting of Tetraselmis sp. for wider application in different sectors. Furthermore, this review highlights the key challenges associated with large-scale cultivation, biomass harvesting, and commercial applications for Tetraselmis sp.

Influence of Novel EnZolv Pretreatment on the Release of Reducing Sugar and Proximate Content of Banana Fiber

Lignocellulosic biomass (LCB) from agriculture residues has gained a lot of attention in recent years for its conversion to useful by-products. The one drawback that the conversion of biomass faces is its recalcitrant nature which can be overcome by effective pretreatment technology. One such process is the EnZolv, a novel pretreatment technique used for delignification of biomass and it was recognized as an eco-friendly approach. The main objective of our present study is to optimize the novel EnZolv process parameters for enhanced release of reducing sugar from banana fiber. Banana fiber pre-optimization for EnZolv pretreated at 100% moisture content, incubated at 40 °C temperature, with an enzyme load of 50 U·g-1 of biomass for an incubation time of 5 h at a shaking speed of 100 rpm yielded enhanced sugar release of 1.7 mg·mL-1. The effect of pretreatment on proximate composition results in a decrease in the volatile matter (53%) and moisture percentage (1.07%) and an increase in the other parameters such as ash content (12%) and fixed carbon content (34%) under the optimized condition. A significantly higher release of phenol content 1264 µg·mL-1 equivalent to gallic acid suggests that EnZolv pretreatment confirms the degradation of lignin content in the biomass.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-023-01130-4.

Cell destruction level and metabolites green-extraction of Tetraselmis suecica by low and intermediate frequency ultrasound

Low (20 kHz) and intermediate (100 kHz) frequency ultrasound (US) were studied for their efficiency on cell destruction and metabolites extraction of the microalga T. suecica. This study revealed different levels of cell destruction. Firstly, the prolonged irradiation of US at low frequency allowed the extraction of 90% of total proteins and 70% of carbohydrates by rapidly inducing at high power (100 W or 200 W) a coiling up phenomenon of the cell walls on themselves. A low power (50 W) over short times allows extracting proteins by the perforation of the cells without destroying them, opening the perspective of milking. Furthermore, the use of 100 kHz frequency, showed lower yields of metabolites as well as a low level of cell destruction, resulting in a simple deflation of the cells.

Improvement of Asterarcys quadricellulare biomass solubilization and subsequent biogas production via pretreatment approaches: structural changes and kinetic modeling evaluation

This study investigated the effect of enzymatic and hydrothermal pretreatment approaches on the solubilization of organic matter, structure, and biogas yield from microalgal biomass. The soluble chemical oxygen demand (sCOD) concentration increased by 1.21-3.30- and 5.54-6.60-fold compared to control by enzymatic and hydrothermal pretreatments respectively. The hydrothermal pretreatment affected the structural changes in the microalgal biomass markedly; nonetheless, increased enzymatic concentration also had a definite effect on it as determined by qualitative approaches like scanning electron microscopy and Fourier transform infrared spectroscopy. Also, the hydrothermal pretreatment (100 °C for 30 min) resulted in the highest biogas production potential (P) of 765.37 mLg^-1 VS at a maximum biogas production rate (R_m) of 22.66 mLg^-1 day^-1 with a very short lag phase (λ) of 0.07 days. The biogas production of pretreated microalgal biomass particularly at higher enzyme dose (20%, 24 h) and higher hydrothermal pretreatment temperature (120 °C, 30 min) showed a significant but weak correlation (R = 0.53) with sCOD, thus demonstrating that the less organic matter was used up for the biogas production. The modified Gompertz model explained the anaerobic digestion of microalgal biomass more accurately and had a better fit to the experimental data comparatively because of the low root mean square error (3.259-16.728), residual sum of squares (78.887-177.025), and Akaike's Information Criterion (38.605-62.853).

Current trends in the pretreatment of microalgal biomass for efficient and enhanced bioenergy production

Biofuels from microalgal biomass is among some of the promising sustainable energy technologies that can significantly replace the dependence on fossil fuels worldwide due to potentiality to lower CO₂ emissions. Nevertheless, the extraction of biomolecules for biofuel generation is inhibited by the rigidity of the cellular structure of microalgal biomass. Various pretreatment strategies have been evaluated for their efficacy in microalgal cell wall disruption to enhance microalgal bioenergy production. However, the efficiency of the pretreatment methods depend on the particular species being treated due to the inherent variability of the composition of the cell wall. This paper reviews pretreatment strategies (mainly novel physical, chemical and physicochemical) employed in bioenergy generation from microalgal biomass, address existing constraints and provides prospects for economic and industrial-scale production. The authors have also discussed the different pretreatment methods used for biodiesel, bioethanol, and biohydrogen production.

Strategies and advances in the pretreatment of microalgal biomass

Modification of structural components, especially the cell wall, through adequate pretreatment strategies is critical to the bioconversion efficiency of algal biomass to biorefinery products. Over the years, several physical, physicochemical, chemical and green pretreatment methods have been developed to achieve maximum productivity of desirable by-products to sustain a circular bioeconomy. The effectiveness of the pretreatment methods is however, species specific due to diversity in the innate nature of the microalgal cell wall. This review provides a comprehensive overview of the most notable and promising pretreatment strategies for several microalgae species. Methods including the application of stress, ultrasound, electromagnetic fields, pressure, heat as well as chemical solvents (ionic liquids, supercritical fluids, deep eutectic solvents etc.) have been detailed and analyzed. Enzyme and hydrolytic microorganism based green pretreatment methods have also been reviewed. Metabolic engineering of microorganisms for product specificity and lower inhibitors can be a future breakthrough in microalgal pretreatment.

Optimization of microwave-assisted carbohydrate extraction from indigenous Scenedesmus sp. grown in brewery effluent using response surface methodology

The use of wastewater as a nutrient source for microalgae cultivation is considered as a cost-effective approach for algal biomass and biofuel production. The microalgal biomass contains carbohydrates that can be processed into bioethanol through different extraction methods. The objective of this study is to optimize the microwave-assisted extraction (MAE) of carbohydrates from the indigenous Scenedesmus sp. grown on brewery effluent. Optimization of independent variables, such as acid concentration (0.1–5 N), microwave power (800–1200 W), temperature (80–180 °C) and extraction time (5–30 min) performed by response surface methodology. It was found that all independent variables had a significant and positive effect on microwave-assisted carbohydrate extraction. The quadratic model developed on the basis of carbohydrate yield had F value of 112.05 with P < 0.05, indicating that the model was significant to predict the carbohydrate yield. The model had a high value of R² (0.9899) and adjusted R² (0.9811), indicating that the fitted model displayed a good agreement between the predicted and actual carbohydrate yield. An optimum carbohydrate yield obtained was 260.54 mg g⁻¹ under the optimum conditions of acid concentration (2.8 N), microwave power (1075 W), temperature (151 °C) and extraction time (22 min). The validation test showed that the model has adequately described the microwave-assisted extraction (MAE) of carbohydrates from microalgal biomass. This study demonstrated that the indigenous Scenedesmus sp. grown on brewery effluent provides a promising result in carbohydrate production for bioethanol feedstock.

Evaluation of pretreatments for solubilisation of components and recovery of fermentable monosaccharides from microalgae biomass grown in piggery wastewater

Microalgae-bacteria biomass cultured in wastewater is an interesting renewable material capable of metabolising nutrients from wastes into carbohydrates, proteins, and lipids through photosynthesis. Despite the interest in the valorisation of this biomass to improve the viability of microalgae-based wastewater treatment processes, very scarce research has been devoted to the fractional recovery of its components. This work evaluates the effect of different pretreatments coupled with enzymatic hydrolysis on the solubilisation of biomass components and on the recovery of fermentable monosaccharides (glucose and xylose) from Scenedesmaceae based biomass grown in a thin layer reactor feed with piggery wastewater. Chemical pretreatments generated high concentrations of byproducts, mainly organic acids. No bacterial DNA was found in these pretreated biomasses. The acid pretreatment provided the highest carbohydrate solubilisation (98%) and monosaccharide recovery (81%). Enzymatic hydrolysis coupled with alkaline NaOH 2 M pretreatment achieved almost complete solubilisation of the biomass components, but high carbohydrate losses. Physical pretreatments remarkably increased the solubilisation of the biomass components during the enzymatic hydrolysis step, especially bead milling, which achieved solubilisation yields of 83% of carbohydrates, 43% of proteins, and 60% of lipids. The presence of viable bacteria in these pretreated biomasses could be related to the high carbohydrate losses and the generation of methanol and ethanol in addition to organic acids as byproducts.

Valorization of microalgal biomass for biohydrogen generation: A review

Third generation biomass, i.e. microalgae, has emerged as a promising alternative to first and second generation biomass for biohydrogen production. However, its utilization is still low at present, due to several reasons including the strong and rigidity of the microalgal cell wall that limit the hydrolysis efficiency during dark fermentation (DF) and photofermentation (PF) processes. To improve the utilization efficiency of microalgal biomass, it is crucial that important aspects related to the production of the biomass and the following processes are elaborated. Thus, this article provides detailed overview of algal strains, cultivation, and harvesting. It also presents recent research and detailed information on microalgal biomass pretreatment, and biohydrogen production through DF, PF, and co-digestion of microalgal biomass with organic materials. Furthermore, factors affecting fermentation processes performance and the use of molecular techniques in biohydrogen production are presented. This review also discusses challenges and future prospects towards biohydrogen production from microalgal biomass.

Enhancement of short-chain fatty acids production from microalgae by potassium ferrate addition: Feasibility, mechanisms and implications

Anaerobic fermentation of microalgae was always hindered by its rigid cell wall structure. This paper reports a novel technique, i.e., adding potassium ferrate (K₂FeO₄) into microalgae fermentation systems to enhance short-chain fatty acids (SCFAs) production. The results showed that the maximum SCFAs production and acetic acid proportion were 732.6 mg COD/g VS and 54.6% at a dosage of 112.8 mg Fe(VI)/g VS, which were 168% and 208% of those in the control, respectively. Mechanism studies revealed that K₂FeO₄ effectively destroyed surface morphology and cell structure, and thus facilitated microalgae solubilization, providing a large number of biodegradable substrates for subsequent SCFA production. Although K₂FeO₄ inhibited all the microbial activities relevant to hydrolysis, acidification and methanogenesis processes to some degree, its inhibition to methanogens was much severer than that to other microbes. Illumina MiSeq sequencing analyses revealed that K₂FeO₄ addition increased the relative abundance (from 9.45% to 50.4%) of hydrolytic and SCFAs-forming bacteria.

Optimisation of the production of fermentable monosaccharides from algal biomass grown in photobioreactors treating wastewater

Biomass grown in wastewater treatment photobioreactors is a cheap raw material with high contents of carbohydrates, proteins and lipids. This work studies the production of fermentable monosaccharides from three biomasses grown in piggery wastewater (P), domestic wastewater (W) and synthetic medium (S) by applying chemical pretreatment and enzymatic hydrolysis, using a Taguchi design. ANOVA identified temperature, chemical reagent type and chemical reagent concentration as significant operational parameters. However, the biomass concentration, pretreatment time, enzyme dosage and enzymatic hydrolysis time had no remarkable effect. The bacterial content of the biomass had no relevant impact on carbohydrate and protein solubilisation but had a remarkable effect on the degradation of the released carbohydrates (57, 60 and 37% for P, W and S), while also affecting lipid solubilisation. Pretreatment with HCl 2 M at 120 °C resulted the optimal conditions, achieving a monosaccharide recovery of 53, 59 and 80% for P, W and S biomasses, respectively.

Effects of acids pre-treatment on the microbial fermentation process for bioethanol production from microalgae

BACKGROUND

Microalgae are one of the promising feedstock that consists of high carbohydrate content which can be converted into bioethanol. Pre-treatment is one of the critical steps required to release fermentable sugars to be used in the microbial fermentation process. In this study, the reducing sugar concentration of Chlorella species was investigated by pre-treating the biomass with dilute sulfuric acid and acetic acid at different concentrations 1%, 3%, 5%, 7%, and 9% (v/v).

RESULTS

3,5-Dinitrosalicylic acid (DNS) method, FTIR, and GC-FID were employed to evaluate the reducing sugar concentration, functional groups of alcohol bonds and concentration of bioethanol, respectively. The two-way ANOVA results (p < 0.05) indicated that there was a significant difference in the concentration and type of acids towards bioethanol production. The highest bioethanol yield obtained was 0.28 g ethanol/g microalgae which was found in microalgae sample pre-treated with 5% (v/v) sulfuric acid while 0.23 g ethanol/g microalgal biomass was presented in microalgae sample pre-treated with 5% (v/v) acetic acid.

CONCLUSION

The application of acid pre-treatment on microalgae for bioethanol production will contribute to higher effectiveness and lower energy consumption compared to other pre-treatment methods. The findings from this study are essential for the commercial production of bioethanol from microalgae.

Pretreatment of Lignocellulosic Materials as Substrates for Fermentation Processes

Lignocellulosic biomass is an abundant and renewable resource that potentially contains large amounts of energy. It is an interesting alternative for fossil fuels, allowing the production of biofuels and other organic compounds. In this paper, a review devoted to the processing of lignocellulosic materials as substrates for fermentation processes is presented. The review focuses on physical, chemical, physicochemical, enzymatic, and microbiologic methods of biomass pretreatment. In addition to the evaluation of the mentioned methods, the aim of the paper is to understand the possibilities of the biomass pretreatment and their influence on the efficiency of biofuels and organic compounds production. The effects of different pretreatment methods on the lignocellulosic biomass structure are described along with a discussion of the benefits and drawbacks of each method, including the potential generation of inhibitory compounds for enzymatic hydrolysis, the effect on cellulose digestibility, the generation of compounds that are toxic for the environment, and energy and economic demand. The results of the investigations imply that only the stepwise pretreatment procedure may ensure effective fermentation of the lignocellulosic biomass. Pretreatment step is still a challenge for obtaining cost-effective and competitive technology for large-scale conversion of lignocellulosic biomass into fermentable sugars with low inhibitory concentration.

Carbon dioxide (CO2) biofixation by microalgae and its potential for biorefinery and biofuel production

Carbon dioxide (CO₂) using biological process is one of the promising approaches for CO₂ capture and storage. Recently, biological sequestration using microalgae has gained many interest due to its capability to utilize CO₂ as carbon source and biomass produced can be used as a feedstock for other value added product for instance biofuel and chemicals. In this study, the CO₂ biofixation by two microalgae species, Chlorella sp. and Tetraselmis suecica was investigated using different elevated CO₂ concentration. The effect of CO₂ concentration on microalgae growth kinetic, biofixation and its chemical composition were determined using 0.04, 5, 15 and 30% CO₂. The variation of initial pH value and its relationship on CO₂ concentration toward cultivation medium was also investigated. The present study indicated that both microalgae displayed different tolerance toward CO₂ concentration. The maximum biomass production and biofixation for Chlorella sp. of 0.64gL^-1 and 96.89mgL^-1d^-1 was obtained when the cultivation was carried out using 5 and 15% CO_2, respectively. In contrast, the maximum biomass production and CO₂ biofixation for T. suecica of 0.72gL^-1 and 111.26mgL^-1d^-1 were obtained from cultivation using 15 and 5% CO₂. The pH value for the cultivation medium using CO₂ was between 7.5 and 9, which is favorable for microalgal growth. The potential of biomass obtained from the cultivation as a biorefinery feedstock was also evaluated. An anaerobic fermentation of the microalgae biomass by bacteria Clostridium saccharoperbutylacenaticum N1-4 produced various type of value added product such as organic acid and solvent. Approximately 0.27 and 0.90gL^-1 of organic acid, which corresponding to acetic and butyric acid were produced from the fermentation of Chlorella sp. and T. suecica biomass. Overall, this study suggests that Chlorella sp. and T. suecica are efficient microorganism that can be used for CO₂ biofixation and as a feedstock for chemical production.