Enhanced effectiveness of Rhizopus oryzae by immobilization in a static bed fermentor for l -lactic acid production

Development of a Strategy for L-Lactic Acid Production by Rhizopus oryzae Using Zizania latifolia Waste and Cane Molasses as Carbon Sources

As a biodegradable and renewable material, polylactic acid is considered a major environmentally friendly alternative to petrochemical plastics. Microbial fermentation is the traditional method for lactic acid production, but it is still too expensive to compete with the petrochemical industry. Agro-industrial wastes are generated from the food and agricultural industries and agricultural practices. The utilization of agro-industrial wastes is an important way to reduce costs, save energy and achieve sustainable development. The present study aimed to develop a method for the valorization of Zizania latifolia waste and cane molasses as carbon sources for L-lactic acid fermentation using Rhizopus oryzae LA-UN-1. The results showed that xylose derived from the acid hydrolysis of Z. latifolia waste was beneficial for cell growth, while glucose from the acid hydrolysis of Z. latifolia waste and mixed sugars (glucose and fructose) from the acid hydrolysis of cane molasses were suitable for the accumulation of lactic acid. Thus, a three-stage carbon source utilization strategy was developed, which markedly improved lactic acid production and productivity, respectively reaching 129.47 g/L and 1.51 g/L·h after 86 h of fermentation. This work demonstrates that inexpensive Z. latifolia waste and cane molasses can be suitable carbon sources for lactic acid production, offering an efficient utilization strategy for agro-industrial wastes.

Microbial Fermentation Processes of Lactic Acid: Challenges, Solutions, and Future Prospects

The demand for lactic acid and lactic acid-derived products in the food, pharmaceutical, and cosmetic industries is increasing year by year. In recent decades, the synthesis of lactic acid by microbials has gained much attention from scientists due to the superior optical purity of the product, its low production costs, and its higher production efficiency compared to chemical synthesis. Microbial fermentation involves the selection of feedstock, strains, and fermentation modes. Each step can potentially affect the yield and purity of the final product. Therefore, there are still many critical challenges in lactic acid production. The costs of feedstocks and energy; the inhibition of substrates and end-product; the sensitivity to the inhibitory compounds released during pretreatment; and the lower optical purity are the main obstacles hindering the fermentation of lactic acid. This review highlights the limitations and challenges of applying microbial fermentation in lactic acid production. In addition, corresponding solutions to these difficulties are summarized in order to provide some guidance for the industrial production of lactic acid.

Bioproduction of l- and d-lactic acids: advances and trends in microbial strain application and engineering

Lactic acid is an important platform chemical used in the food, agriculture, cosmetic, pharmaceutical, and chemical industries. It serves as a building block for the production of polylactic acid (PLA), a biodegradable polymer, which can replace traditional petroleum-based plastics and help to reduce environmental pollution. Cost-effective production of optically pure l- and d-lactic acids is necessary to achieve a quality and thermostable PLA product. This paper evaluates research advances in the bioproduction of l- and d-lactic acids using microbial fermentation. Special emphasis is given to the development of metabolically engineered microbial strains and processes tailored to alternative and flexible feedstock concepts such as: lignocellulose, glycerol, C1-gases, and agricultural-food industry byproducts. Alternative fermentation concepts that can improve lactic acid production are discussed. The potential use of inducible gene expression systems for the development of biosensors to facilitate the screening and engineering of lactic acid-producing microorganisms is discussed.

Lactic acid production - producing microorganisms and substrates sources-state of art

Lactic acid is an organic compound produced via fermentation by different microorganisms that are able to use different carbohydrate sources. Lactic acid bacteria are the main bacteria used to produce lactic acid and among these, Lactobacillus spp. have been showing interesting fermentation capacities. The use of Bacillus spp. revealed good possibilities to reduce the fermentative costs. Interestingly, lactic acid high productivity was achieved by Corynebacterium glutamicum and E. coli, mainly after engineering genetic modification. Fungi, like Rhizopus spp. can metabolize different renewable carbon resources, with advantageously amylolytic properties to produce lactic acid. Additionally, yeasts can tolerate environmental restrictions (for example acidic conditions), being the wild-type low lactic acid producers that have been improved by genetic manipulation. Microalgae and cyanobacteria, as photosynthetic microorganisms can be an alternative lactic acid producer without carbohydrate feed costs. For lactic acid production, it is necessary to have substrates in the fermentation medium. Different carbohydrate sources can be used, from plant waste as molasses, starchy, lignocellulosic materials as agricultural and forestry residues. Dairy waste also can be used by the addition of supplementary components with a nitrogen source.

Production of various organic acids from different renewable sources by immobilized cells in the regimes of separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SFF)

The study was aimed at production of different organic acids (OA) (lactic, fumaric, or succinic) by various microbial cells (filamentous fungi Rhizopus oryzae (F-814, F-1127) and bacteria Actinobacillus succinogenes B-10111) immobilized into poly(vinyl alcohol) (PVA) cryogel from diverse renewable raw materials (wheat and rice straw, aspen and pine sawdust, Jerusalem artichoke stems and tubers, biomass of macro- and microalgae) under batch conditions. The process productivity, bulk output and OA concentrations were higher in case of using immobilized cells than in case of free cells under identical conditions. A higher OA productivity was reached via simultaneous enzymatic saccharification and microbial fermentation (SSF) of same raw materials as compared to their separate enzymatic hydrolysis and fermentation of accumulated reducing sugars (SHF). Maximal concentrations of all OAs studied were obtained for bioconversion of Jerusalem artichoke tubers. The immobilized cells were used in long-term conversion of various renewable materials to OAs in SSF.