Hydrophobic molecular features of EPS extracted from anaerobic granular sludge treating wastewater from a paper recycling plant

Starvation Process Would Induce Different Bacterial Mobilities and Attachment Performances in Porous Media without and with Nutrients on Surfaces

The influence and mechanisms of starvation on the bacterial mobile performance in porous media with different nutrition conditions are not well understood. The present study systematically investigated the impacts of starvation on the mobility and attachment of both Gram-negative and Gram-positive strains in porous media without and with nutrients on surfaces in both simulated and real water samples. We found that regardless of strain types and water chemistries, starvation would greatly inhibit bacterial attachment onto bare porous media without nutrients yet could significantly enhance cell attachment onto porous media with nutrients on their surfaces. The mechanisms driving the opposite transport behaviors induced by starvation in porous media without and with nutrients were totally different. We found that the starvation process decreased cell motility and increased repulsive force between bacteria and porous media via decreasing cell sizes and zeta potentials, reducing EPS secretion and cell hydrophobicity, thus increasing transport/inhibiting attachment of bacteria in porous media without nutrients on sand surfaces. In contrast, through strengthening the positive chemotactic response of bacteria to nutrients, the starvation process greatly enhanced bacterial attachment onto porous media with nutrients on sand surfaces. Clearly, via modification of the nutrient conditions in porous media, the mobility/attachment performance of bacteria could be regulated.

Deciphering performance and microbial characterization of marine anammox bacteria-based consortia treating nitrogen-laden hypersaline wastewater: Inhibiting threshold of salinity

Hypersaline wastewater posed a challenge to microbial nitrogen removal processes. Herein, halophilic marine anammox bacteria (MAB) were applied to treat nitrogen-rich wastewater with 35-90 g/L salts for the first time. It was found that MAB, with low relative abundance (2.3-6.9 %), still exhibited good nitrogen removal efficiency (>90 %) under 35-70 g/L salts. The specific anammox activity peaked at 180.16 mg N/(g·VSS·d) at 65 g/L salts. MAB secreted more extracellular polymeric substances to resist the adverse effects of hypersaline stress. Nevertheless, the nitrogen removal deteriorated at 75 g/L salts, and further collapsed as the salinity increased. At 90 g/L salts, total nitrogen removal rate decreased by 74 % compared with that of 35 g/L salts. Besides, SBR1031 increased from 12.0 % (35 g/L salts) to 17.4 % (90 g/L salts) and became the dominant bacterial genus in the reactor. This work shed light on the treatment of hypersaline wastewater through MAB.

Enzyme-enhanced acidogenic fermentation of waste activated sludge: Insights from sludge structure, interfaces, and functional microflora

Anaerobic fermentation is widely installed to recovery valuable resources and energy as CH4 from waste activated sludge (WAS), and its implementation in developing countries is largely restricted by the slow hydrolysis, poor efficiency, and complicate inert components therein. In this study, enzyme-enhanced fermentation was conducted to improve sludge solubilization from 283 to 7728 mg COD/L and to enhance volatile fatty acids (VFAs) yield by 58.6 % as compared to the conventional fermentation. The rapid release of organic carbon species, especially for tryptophan- and tyrosine-like compounds, to outer layer of extracellular polymeric substance (EPS) occurred to reduce the structural complexity and improve the sludge biodegradability towards VFAs production. Besides, upon enzymatic pretreatment the simultaneous exposure of hydrophilic and hydrophobic groups on sludge surfaces increased the interfacial hydrophilicity. By quantitative analysis via interfacial thermodynamics and XDLVO theory, it was confirmed that the stronger hydrophilic repulsion and energy barriers in particle interface enhanced interfacial mass transfer and reactions involved in acidogenic fermentation. Meanwhile, these effects stimulate the fermentation functional microflora and predominant microorganism, and the enrichment of the hydrolytic and acid-producing bacteria in metaphase and the proliferation of acetogenic bacteria, e.g., Rubrivivax (+9.4 %), in anaphase also benefits VFAs formation. This study is practically valuable to recovery valuable VFAs as carbon sources and platform chemicals from WAS and agriculture wastes.

Sludge biodrying coupled with photocatalysis improves the degradation of extracellular polymeric substances

The efficiency of sludge dewatering is limited by extracellular polymeric substances (EPS) during biodrying. This study investigated the effect of photocatalysis-mediated EPS degradation on sludge dewatering performance during the sludge biodrying process. The photocatalysis of municipal sludge was first carried out to choose a cost-efficient catalyst. Then sludge biodrying tests were performed using TiO2-coated amendment (TCA) and uncoated amendment (TUCA) as the control. Municipal sludge photocatalysis results showed that using TiO2 could efficiently degrade carbohydrates and proteins in the EPS within 60 min. After 20-day biodrying, photocatalysis significantly promoted a reduction in the moisture content and EPS by 17.64% and 6.88%, respectively. The surface-enhanced Raman scattering (SERS) intensities of the C-C-O symmetric stretching vibration peak of D-lactose and the C-S stretching vibration peak of cysteine were significantly decreased by approximately 33.19% and 44.76%, respectively, indicating that photocatalysis indeed promoted the reduction of polysaccharides and cysteine in the EPS, especially after the thermophilic phase. The hydrophilic amino acid content decreased by 23.02%, verifying that photocatalysis could improve EPS hydrophobicity. Consequently, municipal sludge biodrying coupled with photocatalysis promotes sludge EPS degradation and enhances sludge dewaterability, improving the efficiency of sludge biodrying.

Insights into nitrogen removal and microbial response of marine anammox bacteria-based consortia treating saline wastewater: From high to moderate and low salinities

Marine anammox bacteria (MAB) have promising nitrogen removal performance in high saline wastewater treatment. Nevertheless, the impact resulting from moderate and low salinities on MAB is still unclear. Herein, MAB were applied to treat saline wastewater from high to moderate and low salinities for the first time. Independent of salinities (35-3.5 g/L), MAB consistently exhibited good nitrogen removal performance, and maximum total nitrogen removal rate (0.97 kg/(m³·d)) occurred at 10.5 g/L salts. More extracellular polymeric substances (EPSs) were secreted by MAB-based consortia to resist hypotonic surroundings. However, a sharp EPS decrease was accompanied by the collapse of MAB-driven anammox process, and MAB granules disintegrated due to long-term exposure to salt-free environment. The relative abundance of MAB varied from 10.7% to 15.9% and 3.8% as salinity decreased from 35 to 10.5 and 0 g/L salts. These findings will provide practical implementation of MAB-driven anammox process treating wastewater with different salinities.

Extracellular Polymeric Substances Facilitate the Adsorption and Migration of Cu2+ and Cd2+ in Saturated Porous Media

Heavy metal contamination in groundwater is a serious environmental problem. Many microorganisms that survive in subsurface porous media also produce extracellular polymeric substances (EPS), but little is known about the effect of these EPS on the fate and transport of heavy metals in aquifers. In this study, EPS extracted from soil with a steam method were used to study the adsorption behaviors of Cu2+ and Cd2+, employing quartz sand as a subsurface porous medium. The results showed that EPS had a good adsorption capacity for Cu2+ (13.5 mg/g) and Cd2+ (14.1 mg/g) that can be viewed using the Temkin and Freundlich models, respectively. At a pH value of 6.5 ± 0.1 and a temperature of 20 °C, EPS showed a greater affinity for Cu2+ than for Cd2+. The binding force between EPS and quartz sand was weak. The prior saturation of the sand media with EPS solution can significantly promote the migration of the Cu2+ and Cd2+ in sand columns by 8.8% and 32.1%, respectively. When treating both metals simultaneously, the migration of Cd2+ was found to be greater than that of Cu2+. This also demonstrated that EPS can promote the co-migration of Cu2+ and Cd2+ in saturated porous media.

Enhanced phenols removal and methane production with the assistance of graphene under anaerobic co-digestion conditions

Coal gasification wastewater (CGW) contains high concentration phenols which lead to poor anaerobic biodegradability and resource utilization. In this paper, new insights to improve synthetic CGW anaerobic degradation with the help of graphene under co-digestion conditions were investigated. Batch tests showed that with the addition of graphene dosage of 10 g/L and glucose as a co-substrate with chemical oxygen demand (COD) concentration of 2000 mg/L, the average COD concentration decreased from 3995 mg/L on day 1 to 983 mg/L on day 12. The average total phenol (TP) concentration decreased from 431 mg/L on day 1 to 23 mg/L on day 12. The cumulative methane production for 12 days was about 200 mL. Long-term experiments showed the average effluent COD and total phenol reached 1137 mg/L and 200 mg/L, respectively. While methane production stabilized at 500 mL/d. In addition, the coenzyme F₄₂₀ concentration increased from 1.075 μmol/g/VSS to 2.3 μmol/g/VSS. The analysis of microbial community structure indicated that the performance of phenols removal and methane production was related to the main microbial flora. The enriched Clostridium, Pseudomonas and species from Firmicutes and Chloroflexi participated in the stages of hydrolysis and acidogenesis. The electrogens Pseudomonas and archaea Methanosaeta were likely the major groups taking part in the direct interspecies electron transfer (DIET). The results obtained in this paper provide a theoretical basis for high-efficiency anaerobic degradation of CGW in practical engineering applications.

Dewatering efficiency of sewage sludge during Fe2+-activated persulfate oxidation: Effect of hydrophobic/hydrophilic properties of sludge EPS

To clarify the effect of the hydrophobic/hydrophilic polarity of extracellular polymeric substances (EPS) on sludge filterability improvement during S₂O₈^2-/Fe²⁺ oxidation, waste activated sludge (WAS), glucose-fed hydrophilic sludge (HPI-WAS), and sodium acetate-fed hydrophobic sludge (HPO-WAS) samples were cultivated, and their dewatering behaviors were individually explored. Experimental results showed that S₂O₈^2- oxidation effectively disintegrated the polymeric EPS and led to a more significant reduction in the water content for HPO-WAS than for HPI-WAS (12.87-15.23% vs 9.31-12.12%), especially regarding the bound water (W_b) content. After oxidation, as high as 38.88-42.61% of the W_b within HPO-WAS samples were declined, much higher than the HPI-WAS samples (19.27-29.20%). Specifically, carbohydrates within sludge EPS negatively influenced the dewatering process of S₂O₈^2-/Fe²⁺ oxidation. By contrast, abundant existence of humic acids and polymeric proteinaceous components (especially those hydrophilic proteins and transitional humic acids) within the sludge EPS exhibited a converse trend. FT-IR and EEM spectral, as well as particle sizes variation for the sludge samples before and after S₂O₈^2-/Fe²⁺ oxidation was also evaluated. This study provides new insight into the enhancement of S₂O₈^2-/Fe²⁺ oxidation for sludge dewatering based on polarity analysis of EPS.

The key role of inoculated sludge in fast start-up of sequencing batch reactor for the domestication of aerobic granular sludge

Two types of inoculated sludges, granular sludge that had been stored at -20°C and activated sludge, were investigated for the domestication of aerobic granular sludges (AGSs) in sequencing batch reactors (SBRs). The results showed that using the stored granular sludge as inoculation sludge could effectively shorten the domestication time of AGS and yielded mature granular sludge after 22 days of operation. The AGS domesticated by stored granular sludge had better biomass and sedimentation properties; its MLSS and SVI reached 8.55 g/L and 35.27 mL/g, respectively. The removal efficiencies for chemical oxygen demand (COD), ammonium nitrogen (NH₄⁺-N) and total phosphorus (TP) reached 90.76%, 97.39% and 96.40%, respectively. By contrast, 54 days were needed to obtain mature granules using activated sludge. The microbial community structure was probed by using scanning electron microscopy (SEM) and high-throughput sequencing. The results showed that the diversity of the microbial community in mature granules was reduced when stored granular sludge rather than activated sludge was employed as inoculation sludge, and the dominant microbes were changed. The dominant species in mature granules domesticated using stored granular sludge were Zoogloea, Acidovorax and Tolumonas at the genus classification level, while the dominant species were Zoogloea and TM7-genera in granules developed from activated sludge.

Role of feed water biodegradable substrate concentration on biofouling: Biofilm characteristics, membrane performance and cleanability

Biofouling severely impacts operational performance of membrane systems increasing the cost of water production. Understanding the effect of critical parameters of feed water such as biodegradable substrate concentration on the developed biofilm characteristics enables development of more effective biofouling control strategies. In this study, the effect of substrate concentration on the biofilm characteristics was examined using membrane fouling simulators (MFSs). A feed channel pressure drop (PD) increase of 200 mbar was used as a benchmark to study the developed biofilm. The amount and characteristics of the formed biofilm were analysed in relation to membrane performance indicators: feed channel pressure drop and permeate flux. The effect of the characteristics of the biofilm developed at three substrate concentrations on the removal efficiency of the different biofilms was evaluated applying acid/base cleaning. Results showed that a higher feed water substrate concentration caused a higher biomass amount, a faster PD increase, but a lower permeate flux decline. The permeate flux decline was affected by the spatial location and the physical characteristics of the biofilm rather than the total amount of biofilm. The slower growing biofilm developed at the lowest substrate concentration was harder to remove by NaOH/HCl cleanings than the biofilm developed at the higher substrate concentrations. Effective biofilm removal is essential to prevent a fast biofilm regrowth after cleaning. While substrate limitation is a generally accepted biofouling control strategy delaying biofouling, development of advanced cleaning methods to remove biofilms formed under substrate limited conditions is of paramount importance.

A review on the interactions between engineered nanoparticles with extracellular and intracellular polymeric substances from wastewater treatment aggregates

Engineered nanoparticles (ENPs) will inevitably enter wastewater treatment plants (WWTPs) due to their widespread application; thus, it is necessary to study the migration and transformation of nanoparticles in sewage treatment systems. Extracellular polymeric substances (EPSs) such as polysaccharides, proteins, nucleic acids, humic acids and other polymers are polymers released by microorganisms under certain conditions. Intracellular polymeric substances (IPSs) are microbial substances contained in the body with compositions similar to those of extracellular polymers. In this review, we summarize the characteristics of EPSs and IPSs from sewage-collecting microbial aggregates containing pure bacteria, activated sludge, granular sludge and biofilms. We also further investigate the dissolution, adsorption, aggregation, deposition, oxidation and other chemical transformation processes of nanoparticles, such as metals, metal oxides, and nonmetallic oxides. In particular, the review deeply analyzes the migration and transformation mechanisms of nanoparticles in EPS and IPS matrices, including physical, chemical, biological interactions mechanisms. Moreover, various factors, such as ionic strength, ionic valence, pH, light, oxidation-reduction potential and dissolved oxygen, influencing the interaction mechanisms are discussed. In recent years, studies on the interactions between EPSs/IPSs and nanoparticles have gradually increased, but the mechanisms of these interactions are seldom explored. Therefore, developing a systematic understanding of the migration and transformation mechanisms of ENPs is significant.