Performance of cathodic nitrate reduction driven by electricity generated from ANAMMOX sludge in anode

Novel slow-release carbon source improves anodic denitrification and electricity generation efficiency in microbial fuel cells

MFC anodic denitrification is more suitable for the coexistence of organic matter and nitrate in actual sewage, but the traditional carbon source has some problems such as high cost and difficulty of dosage control in MFC. Herein, corncob and polycaprolactone (PCL) were mechanically pulverized and mixed in the system of polyvinyl alcohol and sodium alginate, and cross-linked to prepare slow-release carbon source fillers (CPSP), which were added to the MFC anolyte to realize the coupling of solid-phase denitrification and anodic denitrification. Results showed the start-up period of MFC experimental group (MFC-C) with CPSP was slightly longer than the control group (MFC-0), but MFC-C's maximum output voltage (648.4 mV) and power density (2738 mW/m3) could be increased by 5% and 15% higher than that of MFC-0 (P < 0.05). The degradation process of MFC substrate in unit cycle was mainly divided into nitrogen removal stage (0-8 h) and electricity generation stage (8-48 h). The NO3--N and COD degradation and power generation kinetic processes of MFC conformed to the Han-Levenspiel model. Kinetics experiments showed CPSP can improve the affinity and tolerance of MFC to NO3--N, also it can alleviate the pressure of electron competition in anolyte and improve coulombic efficiency. In addition, microbial communities were significantly changed under the effect of CPSP (P < 0.001). Meanwhile, CPSP can promote the synthesis of denitrification functional genes. This study provides a new strategy to improve the performance of MFC by the addition of novel denitrification carbon source.

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

Bioelectrochemical systems for enhanced nitrogen removal with minimal greenhouse gas emission from carbon-deficient wastewater: A review

Nitrogen pollution and the rising amount of wastewater generation are calling for advanced wastewater treatments, which is particularly necessary for carbon-deficient wastewater that contains multi-species inorganic nitrogen, since conventional heterotrophic denitrification processes cannot remove nitrogen completely when carbon sources are insufficient. For that, bioelectrochemical systems (BES) have been recently developed because they can simultaneously produce electricity and remove resistant nitrogen from the carbon-deficient wastewater. However, the simultaneous removal of multi-species inorganic nitrogen cannot be achieved by electroautotrophic denitrification using BES alone. Moreover, the efficiency of nitrogen removal and power generation has been thwarted by the low energy output, high internal resistance of the device, and electron competition in non-denitrification pathways. This review article discusses the latest developments for nitrogen removal through BES-enhanced denitrification and elucidates multiple coupled BES-based denitrification pathways to remove multi-species inorganic nitrogen simultaneously. Focus points of the research area include coupling BES technologies with emerged methods, electron transfer enhancement, and avoiding electron competition that improves performance with less cost. The prospect of reducing emissions of greenhouse gases is also critically reviewed, in the hope of reducing potential intermediate products of denitrification, such as nitrous oxide (a potent greenhouse gas), through multi-factor regulation. We imply that BES is a good choice for future scale-up applications of MFC coupled with MEC to treat carbon-deficient wastewater. Overall, this review will provide useful information for the development of advanced technologies to treat carbon-deficient wastewater with less emission of greenhouse gases.

Coupling oxidation of acid volatile sulfide, ferrous iron, and ammonia nitrogen from black-odorous sediment via autotrophic denitrification-anammox by nitrate addition

The coupling removal of acid volatile sulfide (AVS), ferrous iron, and ammonia nitrogen has been applied for black-odorous sediment remediation. In this study, calcium nitrate with different N/(S + Fe) ratios (0.45, 0.90, 1.20 and 1.80) was added into black-odorous sediment in four systems named R1, R2, R3, and R4. Results showed that the removal rate of AVS was 76.40% in the R1, which was lower compared with rates in R2-R4 around 96.70%. The ferrous oxidation rate was approximately 87.00% in R2-R4, which was considerably higher than that in the R1 (24.62%). And the ammonia was reduced by 81.02%, 88.00%, 100%, and 57.18% in R1, R2, R3 and R4, respectively. During the reaction, nitrite accumulation was observed, indicating partial denitrification. Moreover, microbes related to autotrophic denitrification (e.g., genus Thiobacillus, Dok59, GOUTA19, Gallionella, with the highest abundance of 15.40%, 13.21%, 8.79%, 9.44%, respectively) were detected in all systems. Furthermore, the anammox bacteria Candidatus_Brocadia with the highest abundance of 3.44% and 4.00% in R2 and R3, respectively was also found. These findings confirmed that AVS, ferrous iron, and ammonia nitrogen could be simultaneously removed via autotrophic denitrification coupled with anammox in black-odorous sediment by nitrate addition.

Creating tidal flow via siphon for better pollutants removal in a microbial fuel cell-constructed wetland

Oxygen is the electron acceptor in cathode chamber of microbial fuel cell-constructed wetland system (MFC-CW). The objective of the study lies in creating a "tidal flow" (TF) in cathode chamber via a siphon to enhance the oxygen diffusion, thus promoting the system performance. A laboratory scale MFC-CW with a siphon driven TF recirculation was proposed and designed. It allows the variable water level being created in four operational modes. The results demonstrated the significance of the siphon which was reflected by the attractive wastewater treatment performance. Compared with the tested four operational modes under the same hydraulic condition, the highest total nitrogen removal efficiency of 96.32% and COD removal efficiency of 92.37% were achieved, respectively, in 1st full siphon recirculation mode (FSR) and 2nd FSR operation mode. Indeed, the water level variation range played an important role in pollutants removal performance. Reduced water level variation of the TF in cathode chamber hindered excessive oxygen diffusion into MFC-CW and thus adversely affected the system performance. It is clear that the siphon is a wiser input to bring about the better treatment performance, but it is believed that the enhanced microbial activities behind the oxygen promotion is the driven force to exhibiting a better performance in the MFC-CW system.

Progress in Nitrogen Removal in Bioelectrochemical Systems

Nitrogenous compounds attract great attention because of their environmental impact and harmfulness to the health of human beings. Various biological technologies have been developed to reduce the environmental risks of nitrogenous pollutants. Bioelectrochemical systems (BESs) are considered to be a novel biological technology for removing nitrogenous contaminants by virtue of their advantages, such as low energy requirement and capacity for treating wastewaters with a low C/N ratio. Therefore, increasing attention has been given to carry out biological processes related to nitrogen removal with the aid of cathodic biofilms in BESs. Prior studies have evaluated the feasibility of conventional biological processes including nitrification, denitrification, and anaerobic ammonia oxidation (anammox), separately or combined together, to remove nitrogenous compounds with the help of BESs. The present review summarizes the progress of developments in BESs in terms of the biological process, cathodic biofilm, and affecting factors for efficient nitrogen removal.