Biodegradation of anthraquinone dyes: Interactive assessment upon biodecolorization, biosorption and biotoxicity using dual-chamber microbial fuel cells (MFCs)

Comparison of treatment performance and microbial community evolution of typical dye wastewater by different combined processes

The degradation of typical dye wastewater is a focus of research in the printing and dyeing industry. In this study, a combined micro-electrolysis and microbial treatment method was established to treat refractory dye wastewater, and the pivotal factors in the microbial treatment were optimized. In the series and coupled modes, the removal rates of chroma reached 98.75% and 92.50%, and the removal rates of chemical oxygen demand (COD) reached 96.17% and 82.29%, respectively. The high-throughput sequencing results showed that the microbial communities in the microbial system varied at different treatment stages. From the culture stage to the domestication stage, the dominant phylum was Proteobacteria; however, the community abundance of microorganisms decreased. A combination of micro-electrolysis and biological methods can alter the characteristics of the microbial community, increase the number of dominant phyla, and increase the abundance of microorganisms. The degradation effect of the series mode and the overall strengthening effect of micro-electrolysis on the microorganisms were better than those of the coupled mode. In actual wastewater, the maximum removal rates of chroma, COD, total nitrogen (TN), ammonia nitrogen (NH3-N), and total phosphorus (TP) are 97.50%, 98.90%, 94.35%, 93.95%, and 91.17%, respectively. Three-dimensional fluorescence spectrum analysis showed that microbial processes could significantly degrade fluorescent components in wastewater, and methanogenic active enzymes in anaerobic processes could continue to react. The combined process can realize the efficient treatment of toxic dye wastewater by reducing the toxicity of wastewater and efficiently degrading organic matter, which has important guiding significance for the treatment of refractory dye wastewater.

Microbial degradation and transformation of benzo[a]pyrene by using a white-rot fungus Pleurotus eryngii F032

Polycyclic aromatic hydrocarbons (PAHs) are environmentally recalcitrant contaminants formed from naturally or incomplete combustion of organic materials and some of them are difficult to degrade due to their hydrophobicity and persistency. Benzo [a]pyrene (BaP), is one of PAHs that having five fused benzene and reported as mutagenic, carcinogenic and teratogenic compounds. Biodegradation is one of promising techniques due to its relatively low economic cost and microorganism is a natural capacity to consume hydrocarbons. In this investigation, Pleurotus eryngii F032 was grown in 20 mL of modified mineral salt broth (MSB) supplemented with BaP under static and agitated culture. Within 20 days, static culture removed 59% of BaP, whereas agitated culture removed the highest amount (73%). To expedite BaP elimination, the mechanism and behavior of BaP biosorption and biotransformation by Pleurotus eryngii F032 were additionally examined by gas chromatography-mass spectrometer (GC-MS). The optimal conditions for P. eryngii F032 to eliminate BaP were 25 °C, a C/N ratio of 8, pH 3 and 0.2% inoculum concentration. At an initial BaP content of 10 mg/L, more than 50% was effectively eliminated within 20 days under these conditions. Salinity, glucose, and rhamnolipids were the most important factors impacting BaP biodegradation. GC-MS found degradation products such as BaP-3,6-quinone, indicating plausible metabolic routes. Finally, it may be assumed that the primary mechanism by which white-rot fungi eliminate BaP is by the utilization of biotransformation enzymes such as laccase to mineralize the PAHs. Hence, Pleurotus eryngii F032 could be an ideal candidate to treat PAHs contaminated soils.

Use of bacterial isolates in the treatment of textile dye wastewater: A review

The textile industry uses large amounts of dyes like reactive, azo, anthraquinone, and triphenylmethane to colour textiles. Dyes that are not used up during the colouration process usually end up in water bodies as waste leading to the pollution of the water bodies. This makes the industry to be one of the major contributors to water pollution in the world. Bacterial agents isolated from various sources like dye contaminated soil and textile wastewater have shown to have the ability to effectively decolourise and degrade these dye pollutants leading to improved water quality. This review discusses bacterial isolates that have been used successfully to degrade and decolourise textile dyes, their mode of dye removal as well as the factors that affect their dye degradation ability. It further looks at the latest wastewater treatment technologies that incorporate bacterial microorganisms to treat dye wastewater.

•

Bacterial isolates offer environmentally friendly solution to dye degradation.

•

Pure and mixed bacterial cultures can remove textile dyes in optimised conditions.

•

Dyes are removed through biosorption or biodegradation mechanisms.

•

Latest technologies provide more effective dye removal options.

Bioelectrochemical system as an innovative technology for treatment of produced water from oil and gas industry: A review

Disposal of the high volume of produced water (PW) is a big challenge to the oil and gas industry. High cost of conventional treatment facilities, increasing energy prices and environmental concern had focused governments and the industry itself on more efficient treatment methods. Bioelectrochemical system (BES) has attracted the attention of researchers because it represents a sustainable way to treat wastewater. This is the first review that summarizes the progress done in PW-fed BESs with a critical analysis of the parameters that influence their performances. Inoculum, temperature, hydraulic retention time, external resistance, and the use of real or synthetic produced water were found to be deeply related to the performance of BES. Microbial fuel cells are the most analyzed BES in this field followed by different types of microbial desalination cells. High concentration of sulfates in PW suggests that most of hydrocarbons are removed mainly by using sulfates as terminal electron acceptor (TEA), but other TEAs such as nitrate or metals can also be employed. The use of real PW as feed in experiments is highly recommended because biofilms when using synthetic PW are not the same. This review is believed to be helpful in guiding the research directions on the use of BES for PW treatment, and to speed up the practical application of BES technology in oil and gas industry.