Chemical modification of chitosan as a gene carrier in vitro and in vivo

Chitosan Scaffolds from Crustacean and Fungal Sources: A Comparative Study for Bone-Tissue-Engineering Applications

Chitosan (CS), a biopolymer, holds significant potential in bone regeneration due to its biocompatibility and biodegradability attributes. While crustacean-derived CS is conventionally used in research, there is growing interest in fungal-derived CS for its equally potent properties in bone regenerative applications. Here, we investigated the physicochemical and biological characteristics of fungal (MDC) and crustacean (ADC)-derived CS scaffolds embedded with different concentrations of tricalcium phosphate minerals (TCP), i.e., 0(wt)%: ADC/MDC-1, 10(wt)%: ADC/MDC-2, 20(wt)%: ADC/MDC-3 and 30(wt)%: ADC/MDC-4. ADC-1 and MDC-1 lyophilised scaffolds lacking TCP minerals presented the highest zeta potentials of 47.3 ± 1.2 mV and 55.1 ± 1.6 mV, respectively. Scanning electron microscopy revealed prominent distinctions whereby MDC scaffolds exhibited striation-like structural microarchitecture in contrast to the porous morphology exhibited by ADC scaffold types. With regard to the 4-week scaffold mass reductions, MDC-1, MDC-2, MDC-3, and MDC-4 indicated declines of 55.98 ± 4.2%, 40.16 ± 3.6%, 27.05 ± 4.7%, and 19.16 ± 5.3%, respectively. Conversely, ADC-1, ADC-2, ADC-3, and ADC-4 presented mass reductions of 35.78 ± 5.1%, 25.19 ± 4.2%, 20.23 ± 6.3%, and 13.68 ± 5.4%, respectively. The biological performance of the scaffolds was assessed through in vitro bone marrow mesenchymal stromal cell (BMMSCs) attachment via indirect and direct cytotoxicity studies, where all scaffold types presented no cytotoxic behaviours. MDC scaffolds indicated results comparable to ADC, where both CS types exhibited similar physiochemical properties. Our data suggest that MDC scaffolds could be a potent alternative to ADC-derived scaffolds for bone regeneration applications, particularly for 10(wt)% TCP concentrations.

Coaxial electrospun Ag-NPs-loaded endograft membrane with long-term antibacterial function treating mycotic aortic aneurysm

The use of endovascular stent-graft has become an important option in the treatment of aortic pathologies. However, the currently used endograft membranes have limited ability to prevent bacterial colonization. This makes them unsuitable for the treatment of mycotic aneurysms, as the infection is prone to progress after endograft implantation. Moreover, even in non-mycotic aortic pathologies, endograft infections can occur in the short or long term, especially for patients with diabetes mellitus or in immune insufficiency conditions. So, this study aimed to develop a kind of Ag-NPs-loaded endograft membrane by coaxial electrospinning technique, and a series of physical and chemical properties and biological properties of the Ag-NPs-loaded membrane were characterized. Animal experiments conducted in pigs confirmed that the Ag-NPs-loaded membrane was basically non-toxic, exhibited good biocompatibility, and effectively prevented bacterial growth in a mycotic aortic aneurysm model. In conclusion, the Ag-NPs-loaded membrane exhibited good biocompatibility, good anti-infection function and slow-release of Ag-NPs for long-term bacteriostasis. Thus, the Ag-NPs-loaded membrane might hold potential for preventing infection progression and treating mycotic aortic aneurysms in an endovascular way.

Chitosan-Functionalized Poly(β-Amino Ester) Hybrid System for Gene Delivery in Vaginal Mucosal Epithelial Cells

Gene therapy displays great promise in the treatment of cervical cancer. The occurrence of cervical cancer is highly related to persistent human papilloma virus (HPV) infection. The HPV oncogene can be cleaved via gene editing technology to eliminate carcinogenic elements. However, the successful application of the gene therapy method depends on effective gene delivery into the vagina. To improve mucosal penetration and adhesion ability, quaternized chitosan was introduced into the poly(β-amino ester) (PBAE) gene-delivery system in the form of quaternized chitosan-g-PBAE (QCP). At a mass ratio of PBAE:QCP of 2:1, the polymers exhibited the highest green fluorescent protein (GFP) transfection efficiency in HEK293T and ME180 cells, which was 1.1 and 5.4 times higher than that of PEI 25 kD. At this mass ratio, PBAE-QCP effectively compressed the GFP into spherical polyplex nanoparticles (PQ-GFP NPs) with a diameter of 255.5 nm. In vivo results indicated that owing to the mucopenetration and adhesion capability of quaternized CS, the GFP transfection efficiency of the PBAE-QCP hybrid system was considerably higher than those of PBAE and PEI 25 kD in the vaginal epithelial cells of Sprague-Dawley rats. Furthermore, the new system demonstrated low toxicity and good safety, laying an effective foundation for its further application in gene therapy.

Gene-Activated Materials in Regenerative Dentistry: Narrative Review of Technology and Study Results

Treatment of a wide variety of defects in the oral and maxillofacial regions requires the use of innovative approaches to achieve best outcomes. One of the promising directions is the use of gene-activated materials (GAMs) that represent a combination of tissue engineering and gene therapy. This approach implies that biocompatible materials will be enriched with gene-carrying vectors and implanted into the defect site resulting in transfection of the recipient's cells and secretion of encoded therapeutic protein in situ. GAMs may be presented in various designs depending on the type of material, encoded protein, vector, and way of connecting the vector and the material. Thus, it is possible to choose the most suitable GAM design for the treatment of a particular pathology. The use of plasmids for delivery of therapeutic genes is of particular interest. In the present review, we aimed to delineate the principle of work and various designs of plasmid-based GAMs and to highlight results of experimental and clinical studies devoted to the treatment of periodontitis, jaw bone defects, teeth avulsion, and other pathologies in the oral and maxillofacial regions.

Room-temperature phosphorescent materials derived from natural resources

Room-temperature phosphorescent (RTP) materials have enormous potential in many different areas. Additionally, the conversion of natural resources to RTP materials has attracted considerable attention. Owing to their inherent luminescent properties, natural materials can be efficiently converted into sustainable RTP materials. However, to date, only a few reviews have focused on this area of endeavour. Motivated by this lack of coverage, in this Review, we address this shortcoming and introduce the types of natural resource available for the preparation of RTP materials. We mainly focus on the inherent advantages of natural resources for RTP materials, strategies for activating and enhancing the RTP properties of the natural resources as well as the potential applications of these RTP materials. In addition, we discuss future challenges and opportunities in this area of research.

Gene network analysis of oxaliplatin-resistant colorectal cancer to target a crucial gene using chitosan/hyaluronic acid/protamine polyplexes containing CRISPR-Cas9

Colorectal cancer (CRC) treatment is dramatically hampered by resistance to oxaliplatin alone or in the combination of irinotecan or 5-fluorouracil and leucovorin. This study aims to design and assess Chitosan/Hyaluronic Acid/Protamine sulfate (CS/HA/PS) polyplexes loaded with CRISPR plasmid for targeting a key gene in cancer drug resistance. Here, recent findings were considered to validate oxaliplatin-resistant CRC-related genes and systems biology approaches employed to detect the critical gene. The polyplexes were characterized according to particle size, zeta potential, and stability. Moreover, carrier toxicity and transfection efficiency were assessed on oxaliplatin-resistant HT-29 cells. The post-transfection evaluations were performed to confirm gene disruption-mediated CRISPR. Eventually, excision cross complementation group 1(ERCC1), a crucial member of the nucleotide excision repair pathway, was selected to be targeted using CRISPR/Cas9 to reverse oxaliplatin resistance in HT-29 cells. CS/HA/PS polyplexes containing CRISPR/Cas9 plasmid exhibited negligible toxicity and comparable transfection efficiency with Lipofectamine™. Following the efficient gene delivery, sequences in CRISPR/Cas9 target sites were altered, ERCC1 was downregulated, and drug sensitivity was successfully restored in oxaliplatin-resistant cells. Findings indicate that CS/HA/PS/CRISPR polyplexes provide a potential strategy for delivering cargo and targeting oxaliplatin resistance-related gene to manipulate drug resistance as a rising concern in cancer therapeutic approaches.

Recent advances in nanotechnology approaches for non-viral gene therapy

Gene therapy has shown great potential in the treatment of many diseases by downregulating the expression of certain genes. The development of gene vectors as a vehicle for gene therapy has greatly facilitated the widespread clinical application of nucleic acid materials (DNA, mRNA, siRNA, and miRNA). Currently, both viral and non-viral vectors are used as delivery systems of nucleic acid materials for gene therapy. However, viral vector-based gene therapy has several limitations, including immunogenicity and carcinogenesis caused by the exogenous viral vectors. To address these issues, non-viral nanocarrier-based gene therapy has been explored for superior performance with enhanced gene stability, high treatment efficiency, improved tumor-targeting, and better biocompatibility. In this review, we discuss various non-viral vector-mediated gene therapy approaches using multifunctional biodegradable or non-biodegradable nanocarriers, including polymer-based nanoparticles, lipid-based nanoparticles, carbon nanotubes, gold nanoparticles (AuNPs), quantum dots (QDs), silica nanoparticles, metal-based nanoparticles and two-dimensional nanocarriers. Various strategies to construct non-viral nanocarriers based on their delivery efficiency of targeted genes will be introduced. Subsequently, we discuss the cellular uptake pathways of non-viral nanocarriers. In addition, multifunctional gene therapy based on non-viral nanocarriers is summarized, in which the gene therapy can be combined with other treatments, such as photothermal therapy (PTT), photodynamic therapy (PDT), immunotherapy and chemotherapy. We also provide a comprehensive discussion of the biological toxicity and safety of non-viral vector-based gene therapy. Finally, the present limitations and challenges of non-viral nanocarriers for gene therapy in future clinical research are discussed, to promote wider clinical applications of non-viral vector-based gene therapy.

Research Progress on Emerging Polysaccharide Materials Applied in Tissue Engineering

The development and application of polysaccharide materials are popular areas of research. Emerging polysaccharide materials have been widely used in tissue engineering fields such as in skin trauma, bone defects, cartilage repair and arthritis due to their stability, good biocompatibility and reproducibility. This paper reviewed the recent progress of the application of polysaccharide materials in tissue engineering. Firstly, we introduced polysaccharide materials and their derivatives and summarized the physicochemical properties of polysaccharide materials and their application in tissue engineering after modification. Secondly, we introduced the processing methods of polysaccharide materials, including the processing of polysaccharides into amorphous hydrogels, microspheres and membranes. Then, we summarized the application of polysaccharide materials in tissue engineering. Finally, some views on the research and application of polysaccharide materials are presented. The purpose of this review was to summarize the current research progress on polysaccharide materials with special attention paid to the application of polysaccharide materials in tissue engineering.

Chitosan/Silk Fibroin Materials for Biomedical Applications-A Review

This review provides a report on recent advances in the field of chitosan (CTS) and silk fibroin (SF) biopolymer blends as new biomaterials. Chitosan and silk fibroin are widely used to obtain biomaterials. However, the materials based on the blends of these two biopolymers have not been summarized in a review paper yet. As these materials can attract both academic and industrial attention, we propose this review paper to showcase the latest achievements in this area. In this review, the latest literature regarding the preparation and properties of chitosan and silk fibroin and their blends has been reviewed.

Glutathione targeted tragacanthic acid-chitosan as a non-viral vector for brain delivery of miRNA-219a-5P: An in vitro/in vivo study

Multiple sclerosis (MS) is a progressive chronic demyelinating and neurodegenerative disease. The symptoms could only be diminished through stimulated remyelination. Although administration of microRNA-219a-5P (miR-219) seems to recover the damages, it is hampered by the challenging delivery of genes to the central nervous system across the blood-brain barrier. To enhance the CNS delivery of miR-219, a novel non-viral targeted vector was appraised by conjugating chitosan (Ch) to tragacanthic acid (TA) and glutathione (Glu). The nanoparticles were characterized and injected into the cuprizone model of MS mice to investigate the in vivo features of the resulting polyplex. Transmission electron microscopy, luxol fast blue staining, and proteolipid protein 1 (Plp1) overexpression confirmed more compact myelin sheaths following the administration of the targeted miR-219 nanoparticles and positron emission tomography (PET) scan also demonstrated the reduced inflammation and higher cell regeneration in the brain. Fluorescence microscopy and in vivo imaging were employed to identify miR-219 accumulation patterns in mice. The polyplex led to miR-219 overexpression, crystallin alpha B upregulation, and apolipoprotein E downregulation. It was concluded that glutathione targeted Ch/TA nanoparticles could be exploited as a feasible non-viral vector for miR-219 specific targeting to the brain, miR-219 overexpression and inflammation abatement in MS.

Using Chitosan or Chitosan Derivatives in Cancer Therapy

Cancer is one of the major causes of death worldwide. Chemotherapeutic drugs have become a popular choice as anticancer agents. Despite the therapeutic benefits of chemotherapeutic drugs, patients often experience side effects and drug resistance. Biopolymers could be used to overcome some of the limitations of chemotherapeutic drugs, as well as be used either as anticancer agents or drug delivery vehicles. Chitosan is a biocompatible polymer derived from chitin. Chitosan, chitosan derivatives, or chitosan nanoparticles have shown their promise as an anticancer agent. Additionally, functionally modified chitosan can be used to deliver nucleic acids, chemotherapeutic drugs, and anticancer agents. More importantly, chitosan-based drug delivery systems improved the efficacy, potency, cytotoxicity, or biocompatibility of these anticancer agents. In this review, we will investigate the properties of chitosan and chemically tuned chitosan derivatives, and their application in cancer therapy.

Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Amino acid derived biopolymers: Recent advances and biomedical applications

Over the past few years, amino acids (AA) have emerged as promising biomaterials for the synthesis of functional polymers. Owing to the diversity of functional groups in amino acids, various polymerization methods may be used to make a wide range of well-defined functional amino-acid/peptide-based optically active polymers with varying polymer lengths, compositions, and designs. When incorporated with chirality and self-assembly, they offer a wide range of applications and are particularly appealing in the field of drug delivery, tissue engineering, and biosensing. There are several classes of these polymers that include polyamides (PA), polyesters (PE), poly(ester-amide)s (PEA)s, polyurethanes (PU)s, poly(depsipeptide)s (PDP)s, etc. They offer the ability to control functionality, conjugation, crosslinking, stimuli responsiveness, and tuneable mechanical/thermal properties. In this review, we present the recent advancements in the synthesis strategies for obtaining these amino acid-derived bio-macromolecules, their self-assembly properties, and the wealth of prevalent applications.

N-[4-(N,N,N-Trimethylammonium)Benzyl]Chitosan Chloride as a Gene Carrier: The Influence of Polyplex Composition and Cell Type

Polyplex-based gene delivery systems are promising substitutes for viral vectors because of their high versatility and lack of disadvantages commonly encountered with viruses. In this work, we studied the DNA polyplexes with N-[4-(N,N,N-trimethylammonium)benzyl]chitosan chloride (TMAB-CS) of various compositions in different cell types. Investigations of the interaction of TMAB-CS with DNA by different physical methods revealed that the molecular weight and the degree of substitution do not dramatically influence the hydrodynamic properties of polyplexes. Highly substituted TMAB-CS samples had a high affinity for DNA. The transfection protocol was optimized in HEK293T cells and achieved the highest efficiency of 30-35%. TMAB-CS was dramatically less effective in nonadherent K562 cells (around 1% transfected cells), but it was more effective and less toxic than polyarginine.

Characterization and optimization of de-esterified Tragacanth-chitosan nanocomposite as a potential carrier for oral delivery of insulin: In vitro and ex vivo studies

Oral administration of insulin is one of the most challenging topics within this area, because insulin is degraded in stomach before it enters the bloodstream. In this study, for the first time, a nano-carrier for controlled and targeted oral delivery of insulin was developed using de-esterified Tragacanth and chitosan. The fabricated nanoparticles were synthesized using coacervation technique and their properties were optimized using response surface methodology. The effect of experimental variables on the particle size and loading efficiency was examined. In addition, the interactions between components were analyzed using Fourier transform infrared. The thermal stability of nanoparticles was studied by thermal gravimetric analysis. The insulin loading efficiency was measured and in vitro release profile and ex vivo insulin permeability was determined. Optimized nanoparticles showed spherical shape with a size less than 200 nm and zeta potential of +17 mV. Owing to their nanoscale dimensions and mucoadhesiveness, nanoparticles were synthesized using medium molecular weight of Chitosan. The insulin loading efficacy for the system was 6.4%, released under simulated gastrointestinal conditions in a pH-dependent manner. Based on all of the obtained results, it can be concluded that these nanoparticles can potentially be utilized as a carrier for the oral insulin delivery.

Current methods of collagen cross-linking: Review

This review provides a report on cross-linking methods used for collagen modifications. Collagen materials have attracted significant academic interest due to its biological properties in native state. However, in many cases the mechanical properties and degradation rate should be tailored to especial biomedical and cosmetic applications. In the proposed review paper, the structure, preparation, and properties of several collagen based materials have been discussed in general, and detailed examples of collagen cross-linking methods have been drawn from scientific literature and practical work. Both, physical and chemical methods of improvement of collagenous materials have been reviewed. In the review paper the cross-linking with glutaraldehyde, genipin, EDC-NHS, dialdehyde starch, chitosan, temperature, UV light and enzyme has been discussed. A critical comparison of currently available cross-linking methods has been shown.

Synthesis, characterization, and the antioxidant activity of the acetylated chitosan derivatives containing sulfonium salts

In this study, a new class of chitosan derivatives possessing sulfonium salts was synthesized, and characterized by FT-IR, ¹H NMR, ¹³C NMR, and elemental analyses. IR spectra, ¹H NMR and ¹³C NMR of the structural units of these polymers validated the designed chitosan derivatives were successfully synthesized. In addition, the antioxidant potential of chitosan and chitosan derivatives was assessed in vitro, screened by 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging, hydroxyl radical scavenging, and superoxide radical scavenging, respectively. Results revealed that designed chitosan derivatives could effectively scavenge DPPH radical, hydroxyl radical, and superoxide radical with inhibition rate of more than 90% at 1.6 mg/mL, higher than chitosan. Moreover, in the cytotoxicity assay, no cytotoxicity was observed for the L929 cells with chitosan and its derivatives at all the testing concentrations. These results indicated that the acetylated chitosan derivatives containing sulfonium salts may be a promising natural antioxidant for the pharmaceutics, food, cosmetics and agriculture management.

Application of nanomaterials in three-dimensional stem cell culture

Petri dish cultured cells have for long provided scientists an aperture to understanding cell's behavior both in normal and disease states as well as in vitro and in vivo. But recent advances have brought to light how the architecture and composite nature of the immediate environment within which the cell is proliferated can profoundly influence its phenotypic features and functions, thus making obvious, limitations of the conventional two-dimensional cell culture despite it cost effectiveness. Fortunately, the transition to three-dimensional (3D) cell culture has occurred concurrently with expanded knowledge of nanoscience and materials, thereby lending significant impetus for innovative research. This review is focused on the application of nanoparticles in 3D stem cell breeding, recent trends and developments in medical sciences for improved drug delivery, and treatment approaches to some human diseases. We also reviewed prevailing challenges and concerns of nanotoxicity as it continues to impede and delay clinical applications as well the ongoing concerted and multidisciplinary efforts to overcome them.

Novel chitosan based nanoparticles as gene delivery systems to cancerous and noncancerous cells

The present study aimed to investigate in vitro DNA transfection efficiency of three novel chitosan derivatives: thiolated trimethyl chitosan (TMC-Cys), methylated 4-N,N dimethyl aminobenzyl N,O carboxymethyl chitosan(MABCC) and thiolated trimethyl aminobenzyl chitosan(MABC-Cys). After polymer synthesis and characterization, nanoparticles were prepared using these polymers and their size, zeta potential and DNA condensing ability were measured. After that, cytotoxicity and transfection efficiency of nanocomplexes were carried out in three different cells. The results showed that all polymers could condense DNA plasmid strongly from N/P 2 and nanocomplexes had eligible sizes and zeta potentials. Moreover, the nanocomplexes had negligible cytotoxicity and MABC-Cys was the most effective vehicle for gene delivery in HEK-293T cells. In the two other cell lines, SKOV-3 and MCF-7, TMC-Cys exhibited the highest transfection efficiency. This study indicated that chemical structure of these novel chitosan derivatives in the interaction with the cell type can lead to successful gene delivery.

Design, mechanism, delivery and therapeutics of canonical and Dicer-substrate siRNA

Upon the discovery of RNA interference (RNAi), canonical small interfering RNA (siRNA) has been recognized to trigger sequence-specific gene silencing. Despite the benefits of siRNAs as potential new drugs, there are obstacles still to be overcome, including off-target effects and immune stimulation. More recently, Dicer substrate siRNA (DsiRNA) has been introduced as an alternative to siRNA. Similarly, it also is proving to be potent and target-specific, while rendering less immune stimulation. DsiRNA is 25–30 nucleotides in length, and is further cleaved and processed by the Dicer enzyme. As with siRNA, it is crucial to design and develop a stable, safe, and efficient system for the delivery of DsiRNA into the cytoplasm of targeted cells. Several polymeric nanoparticle systems have been well established to load DsiRNA for in vitro and in vivo delivery, thereby overcoming a major hurdle in the therapeutic uses of DsiRNA. The present review focuses on a comparison of siRNA and DsiRNA on the basis of their design, mechanism, in vitro and in vivo delivery, and therapeutics.

Microcalorimetric and microscopic studies of the effect of chitosan quaternary ammonium salt on mitochondria

Chitosan quaternary ammonium salt (HACC) has been regarded as an effective biomedical carrier with good application because of its good water-solubility, high cationic potential and strong cell adhesion. Mitochondria are important organelle involved in ATP production and are the center of energy metabolism. In this work, we firstly investigated the effect of HACC on the thermogenic curve of isolated mitochondrial metabolism by microcalorimetry. The results showed that different concentration of HACC had great influence on the mitochondrial energy metabolism. Specifically, low level of HACC stimulated the metabolic activity of mitochondria and the inhibition was found with high concentration of HACC. Then, the effect of HACC on mitochondrial respiratory chain was studied, which was consistent with the results of microcalorimetry. Finally, the alteration of mitochondrial structure induced by HACC was observed and it showed that the membrane of mitochondria was dramatically damaged. These new findings can help us deeply understand the influence and action mechanism of HACC in the metabolic process and provide theoretical and practical foundation for the biosafety of HACC as a medical carrier.

Effect of the linear aliphatic amine functionalization on in vitro transfection efficiency of chitosan nanoparticles

The aim of this study is to prepare the long linear aliphatic amine pendant group-functionalized chitosan based nanoparticulate gene carrier system with improved properties for the efficient transfection. The amine functionalized chitosan (MChi) was synthesized by using N-(2-hydroxyethyl)ethylenediamine (HE-EDA) and characterized for the first time. The nanoparticles of MChi (nMChi) were prepared by ionic gelation method, and their particle size, polydispersity (PDI), zeta potential (mV), gene binding capacity and cytotoxicity were determined. Green Fluorescent Protein circular plasmid DNA (pEGFN1) loaded nanoparticles (gnMChi) were used in the transfection studies. The results showed that nMChi with a particle size of 102.9 nm and zeta potential of 41.9 ± 5.63 mV was non-toxic, had high transfection efficiency in Human Embryonic Kidney 293 and Primary Ovine Fibroblast cell lines and would be used as an efficient gene carrier system.

PEGylated Chitosan for Nonviral Aerosol and Mucosal Delivery of the CRISPR/Cas9 System in Vitro

Chitosan has been widely employed to deliver nucleic acids such as siRNA and plasmids. However, chitosan-mediated delivery of a gene-editing system has not been reported yet. In this study, poly(ethylene glycol) monomethyl ether (mPEG) was conjugated to chitosan with different molecular weights (low molecular weight and medium molecular weight chitosan) achieving a high degree of substitution as identified by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectra. PEGylated chitosan/pSpCas9-2A-GFP nanocomplexes were formed at different N/ P (amine group to phosphate group) ratios and characterized in terms of size and zeta potential. The nanocomplexes developed showed the capability to protect loaded nucleic acids from DNase I digestion and from the stresses of nebulization. In addition, we demonstrated that the PEG conjugation of chitosan improved the mucus-penetration capability of the formed nanocomplexes at N/ P ratios of 5, 10, 20, and 30. Finally, PEGylated low molecular weight chitosan nanocomplexes showed optimal transfection efficiency at an N/ P ratio of 20, while PEGylated medium molecular weight chitosan nanocomplexes showed an optimal transfection efficiency at an N/ P ratio of 5 at pH 6.5 and 6.8. This study established the basis for the delivery of a gene-editing system by PEGylated chitosan nanocomplexes.

Synthesis, characterization, and in vitro cytotoxicity of fatty acyl-CGKRK-chitosan oligosaccharides conjugates for siRNA delivery

In this studies, three fatty acyl derivatives of CGKRK homing peptides were coupled successfully to chitosan oligosaccharides (COS) using sulfosuccinimidyl-4-(N-maleimidomethyl)cyclohexane-1-carboxylate sodium salt (sulfo-SMCC). The COS-SMCC was prepared by direct coupling between COS and sulfo-SMCC in PBS (pH7.5) at RT for 48h. The structure of COS-SMCC and the three fatty acyl-CGKRK-SMCC-COS conjugates were characterized by FT-IR, ¹³C NMR, and SEM. The ability of three conjugates to condense siRNA into nanosized polyplexes and their efficacy in protecting siRNA from serum nucleases degradation were investigated. Among the investigated derivatives, S-CGKRK-COS showed higher siRNA binding affinity as compared to the P-CGKRK-COS and O-CGKRK-COS, respectively. At a ratio of 10:1, complete protection for siRNA from early enzymatic degradation was achieved. The polymers and the polymer/siRNA polyplexes showed negligible cytotoxicity on human breast cancer cell line MDA-MB-231 at all investigated ratios. However, the polyplexes prepared with palmitoyl and oleoyl derivatives at polymer concentration 10μg/mL reduced the cell viability by 21.5% and 35%, respectively. The results of this study revealed the potential use of fatty acyl-CGKRK-COS as a siRNA carrier and confirmed the importance of incorporating a hydrophobic moiety into chitosan to improve its capacity in complexing with siRNA and protection from degradation.

Human Mesenchymal Stem Cells Differentiation Regulated by Hydroxyapatite Content within Chitosan-Based Scaffolds under Perfusion Conditions

The extensive need for hard tissue substituent greatly motivates development of suitable allogeneic grafts for therapeutic recreation. Different calcium phosphate phases have been accepted as scaffold's components with positive influence on osteoinduction and differentiation of human mesenchymal stem cells, in terms of their higher fraction within the graft. Nevertheless, the creation of unlimited nutrients diffusion through newly formed grafts is of great importance. The media flow accomplished by perfusion forces can provide physicochemical, and also, biomechanical stimuli for three-dimensional bone-construct growth. In the present study, the influence of a different scaffold's composition on the human mesenchymal stem cells (hMSCs) differentiation performed in a U-CUP bioreactor under perfusion conditioning was investigated. The histological and immunohistochemical analysis of cultured bony tissues, and the evaluation of osteogenic genes' expression indicate that the lower fraction of in situ formed hydroxyapatite in the range of 10⁻30% within chitosan scaffold could be preferable for bone-construct development.

Aromatic Modification of Low Molecular Weight PEI for Enhanced Gene Delivery

Low molecular weight polyethylenimine (1800 Da, also referred to as oligoethylenimines, OEI) was modified with amino acids, including two aromatic amino acids (tryptophan, phenylalanine) and an aliphatic amino acid (leucine). The substitution degree of amino acids could be controlled by adjusting the feeding mole ratio of the reactants. Fluorescence spectroscopy and circular dichroism experiments demonstrated that the indole ring of tryptophan may intercalate into the DNA base pairs and contribute to efficient DNA condensation. In vitro gene expression results revealed that the modified OEIs (OEI-AAs) may provide higher transfection efficiency even than high molecular weight polyethylenimine (25 kDa, PEI), especially the aromatic tryptophan substituted OEI. Moreover, OEI-AAs exhibited excellent serum tolerance, and up to 137 times higher transfection efficiency than PEI 25 kDa that was obtained in the presence of serum. The cytotoxicity of OEI-AAs is much lower than PEI 25 kDa. This study may afford a new method for the development of low molecular weight oligomeric non-viral gene vectors with both high efficiency and biocompatibility.

Heparin binding chitosan derivatives for production of pro-angiogenic hydrogels for promoting tissue healing

Our aim was to develop a biocompatible hydrogel that could be soaked in heparin and placed on wound beds to improve the vasculature of poorly vascularized wound beds. In the current study, a methodology was developed for the synthesis of a new chitosan derivative (CSD-1). Hydrogels were synthesized by blending CSD-1 for either 4 or 24h with polyvinyl alcohol (PVA). The physical/chemical interactions and the presence of specific functional groups were confirmed by Fourier transform infrared (FT-IR) spectroscopy and proton nuclear magnetic resonance (¹H NMR). The porous nature of the hydrogels was confirmed by scanning electron microscopy (SEM). Thermal gravimetric analysis (TGA) showed that these hydrogels have good thermal stability which was slightly increased as the blending time was increased. Hydrogels produced with 24h of blending supported cell attachment more and could be loaded with heparin to induce new blood vessel formation in a chick chorionic allantoic membrane assay.

Easy on-demand single-pass self-assembly and modification to fabricate gold@graphene-based anti-inflammatory nanoplatforms

Zwitterionic chitosan (ZC) was modified by fully (both for lateral dimension and thickness) nanodimensional gold-graphene oxide (Au@GO) flakes under visible light and the potential of the resulting materials as biomedical nanoplatforms was investigated. Fully nanodimensional GO flakes floating in nitrogen gas were incorporated with Au nanoparticles to form Au@GO nanoflakes, and the Au@GO was then incorporated with ZC droplets to form the Au@GO-ZC hybrid nanoparticles. The collected particles were exposed to visible light to induce the photocatalytic activity of the Au@GO nanoflakes towards the ZC derivatives. The visible-light-exposed particles show different chemical and surface properties from the unexposed particles, while there were no significant differences in cytotoxicity and macrophage inflammatory protein production. This work suggests that incorporating fully nanodimensional Au@GO flakes with ZC is a suitable technique for ambient photo-modification of the chitosans' surface property without significant changes in size and shape and increases in cytotoxicity and inflammatory response.

Multifunctional "core-shell" nanoparticles-based gene delivery for treatment of aggressive melanoma

Gene therapy may be a promising and powerful strategy for cancer treatment, but efficient targeted gene delivery in vivo has so far remained challenging. Here, we developed a well-tailored and versatile "core-shell" ternary system (RRPHC) of systemic gene delivery for treatment of aggressive melanoma. The capsid-like "shell" of this system was engineered to mediate depth penetration to tissues, simultaneously target the CD44 receptors and integrin α_vβ₃ receptors overexpressed on neovasculature and most malignant tumor cells, while the "core" was responsible for nucleus-targeting and effective transfection. The RRPHC ternary complexes enhanced cellular uptake via dual receptor-mediated endocytosis, improved the endosomal escape and significantly promoted the plasmid penetration into the nucleus. Notably, RRPHC ternary complexes exhibited ultra-high gene transfection efficiency (∼100% in B16F10 cells), which surpassed that of commercial transfection agents, PEI 25K, Lipofectamine 2000 and even Lipofectamine 3000. Especially, RRPHC ternary complexes showed excellent serum resistance and remained high gene transfection efficacy (∼100%) even in medium containing 30% serum. In vivo biodistribution imaging demonstrated RRPHC ternary complexes possessed much more accumulation and extensive distribution throughout tumor regions while minimal location in other organs. Furthermore, systemic delivery of the pro-apoptotic mTRAIL gene to tumor xenografts by RRPHC ternary complexes resulted in remarkable inhibition of melanoma, with no systemic toxicity. These results demonstrated that the designed novel RRPHC ternary complexes might be a promising gene delivery system for targeted cancer therapy in vivo.

Carbohydrate-based amphiphilic nano delivery systems for cancer therapy

Nanoparticles (NPs) are novel drug delivery systems that have been attracting more and more attention in recent years, and have been used for the treatment of cancer, infection, inflammation and other diseases. Among the numerous classes of materials employed for constructing NPs, organic polymers are outstanding due to the flexibility of design and synthesis and the ease of modification and functionalization. In particular, NP based amphiphilic polymers make a great contribution to the delivery of poorly-water soluble drugs. For example, natural, biocompatible and biodegradable products like polysaccharides are widely used as building blocks for the preparation of such drug delivery vehicles. This review will detail carbohydrate based amphiphilic polymeric systems for cancer therapy. Specifically, it focuses on the nature of the polymer employed for the preparation of targeted nanocarriers, the synthetic methods, as well as strategies for the application and evaluation of biological activity. Applications of the amphiphilic polymer systems include drug delivery, gene delivery, photosensitizer delivery, diagnostic imaging and specific ligand-assisted cellular uptake. As a result, a thorough understanding of the relationship between chemical structure and biological properties facilitate the optimal design and rational clinical application of the resulting carbohydrate based nano delivery systems for cancer therapy.