Poly(N-vinylcaprolactam), a comprehensive review on a thermoresponsive polymer becoming popular

Carboxyl-functionalized dual pH/temperature-responsive poly(N-vinylcaprolactam) microgels based on isogenous comonomers for smart window applications

Stimuli-responsive poly(N-vinylcaprolactam) (PVCL)-based microgels, which could response to small external environmental changes, have attracted great interests in the fields of biomedicine and nanotechnology. However, the preparation of such microgels meets severe challenge due to their low incorporation efficiency and thermoresponsivity passivation. To address these issues, we select 3-(tert-butoxycarbonyl)-N-vinylcaprolactam (TBVCL), a carboxyl-functionalized VCL derivative, as a comonomer to develop pH/temperature dual-responsive microgels. TBVCL, with a structure similar to VCL, enhances incorporation efficiency and colloidal stability, while reducing thermoresponsivity passivation. The volume phase transition temperature (VPTT) of the microgels can be adjusted over a broad range (19.0-49.5 °C). Notably, the radial swelling ratios of the microgels can be modulated by pH, achieving a maximum swelling ratio of 3. The distinct changes in dissolution-precipitation behavior under different temperatures or pH conditions make these microgels suitable for applications such as smart windows and sensors. Furthermore, this novel approach for fabricating microgels with pH-tunable phase-transition temperatures demonstrates significant potential for the controlled release of nanoparticles (e.g., drugs, catalysts, and quantum dots) and the development of smart nanocrystal-polymer composite sensors.

Osteoblastic Cell Sheet Engineering Using P(VCL-HEMA)-Based Thermosensitive Hydrogels Doped with pVCL@Icariin Nanoparticles Obtained with Supercritical CO2-SAS

New clinical strategies for treating severe bone and cartilage injuries are required, especially for use in combination with implant procedures. For this purpose, p(VCL-co-HEMA) thermosensitive hydrogels have been activated with icariin-loaded nanoparticles to be used as bone-cell-harvesting platforms. Supercritical CO2-SAS technology has been applied to encapsulate icariin, a small molecule that is involved in osteoblastic differentiation. Thus, physical-chemical analysis, including swelling and transmittance, showed the impact of HEMA groups in hydrogel composition. Moreover, icariin (ICA) release from p(VCL-co-HEMA) platforms, including pVCL@ICA nanoparticles, has been studied to evaluate their efficacy in relevant conditions. Finally, the thermosensitive hydrogels' cell compatibility, transplant efficiency, and bone differentiation capacity were tested. This study identifies the optimal formulations for icariin-activated hydrogels for both control and HEMA formulations. Using this technique, osteoblastic sheets that were rich in collagen type I were successfully transplanted and recultivated, maintaining an optimal extracellular matrix (ECM) composition. These findings suggest a new cell-sheet-based therapy for bone regeneration purposes using customized and NP-activated pVCL-based cell platforms.

Characterization of a conjugate between poly(N-vinyl caprolactam) and a triazine-based covalent organic framework as a potential biomaterial

Thermoresponsive polymers (TRPs) have been explored over decades for biomedical applications, and poly(N-vinylcaprolactam) (PVCL) TRP is extensively investigated due to its low toxicity and lower critical solution temperature (LCST), close to physiological temperatures. Besides this, the utilization of covalent organic frameworks (COFs), which belong to a class of porous polymers, in bio-based applications is of great interest due to their remarkable properties. Thus, the integration of PVCL and covalent organic frameworks (COFs) as conjugate materials can lead to advanced bio-based applications; however, the need is to understand the influence of the COF on the PVCL conformation. Herein, a triazine-based COF, CC-TAPT-COF, has been synthesized and completely characterized. Later, the effect of CC-TAPT-COF on the PVCL polymer conformation was studied using various techniques. In fluorescence spectroscopy, a fluorescence quenching for PVCL in the presence of CC-TAPT-COF was observed, which indicated conformational changes. Later, results from thermal fluorescence studies and dynamic light scattering as a function of temperature showed a slight decrease in LCST value for PVCL after the addition of CC-TAPT-COF concentrations. These results showed a slight effect of CC-TAPT-COF on the PVCL conformation. Likewise, a slight decrease in the transmittance value for specific bands in infrared spectra showed a slight effect of CC-TAPT-COF on the PVCL conformation. Further, results from electron microscopy and atomic force microscopy revealed a conjugate formation between PVCL and CC-TAPT-COF due to the presence of binding interactions between them. Overall, the results from several studies showed a slight effect of CC-TAPT-COF on the PVCL during conjugate formation between PVCL and CC-TAPT-COF. This study will be beneficial for the development of COF-thermoresponsive polymer conjugates with a mixture of their unique features as advanced biomaterials.

Synthesis and Physicochemical Properties of Thermally Sensitive Polymeric Derivatives of N-vinylcaprolactam

Six derivatives of poly-N-vinylcaprolactam (PNVCL) P1-P6 were synthesized via surfactant-free precipitation polymerization (SFPP) at 70 °C, with potassium persulfate (KPS) as the initiator. P5 and P6 were synthesized using the cross-linker N,N'-Methylenebisacrylamide (MBA). The conductivity was measured to monitor the polymerization process. The hydrodynamic diameters (HDs) and polydispersity indexes (PDIs) of aqueous dispersions of P1-P6 were determined using dynamic light scattering (DLS) and zeta potential (ZP) using electrophoretic mobilities. At 18 °C for P1-P6, the HDs (nm) were 428.32 ± 81.30 and PDI 0.31 ± 0.19, 528.60 ± 84.70 (PDI 0.42 ± 0,04), 425.96 ± 115.42 (PDI 0.56 ± 0.08), 440.34 ± 106.40 (PDI 0.52 ± 0.09), 198.39 ± 225.35 (PDI 0.40 ± 0.19), and 1201.52 ± 1318.05 (PDI 0.71 ± 0.30), the and ZPs were (mV) 0.90 ± 3.23, -4.46 ± 1.22, -6.44 ± 1.82, 0.22 ± 0.48, 0.18 ± 0.79, and -0.02 ± 0.39 for P1-P6, respectively. The lower critical solution temperature ranged from 27 to 29 °C. The polymers were characterized using the ATR-FTIR method. The study concluded that the physicochemical properties of the product were significantly affected by the initial reaction parameters. Polymers P1-P4 and P6 have potential for use as drug carriers for skin applications.

A Pickering emulsion stabilized by Chitosan-g-Poly(N-vinylcaprolactam) microgels: Interface formation, stability and stimuli-responsiveness

Pickering emulsions stabilized by solid particles are more stable and environmentally friendly compared to traditional surfactants. Herein, a series of Chitosan-g-Poly(N-vinylcaprolactam) (CS-g-PNVCL) microgel particles were synthesized via a free radical surfactant-free emulsion copolymerization and the obtained particles were used to stabilize Pickering emulsions. It is found that the ratio (CS/PNVCL = 60 wt%) was optimal to produce Pickering emulsions. The microstructures of Pickering emulsions can maintain for 60 days at room temperature and this long-term stability is attributed to the CS-g-PNVCL microgel particles adsorbed at the oil-water interface. The Pickering emulsions displayed thermo-responsive characteristics when exposed to environmental stimuli. The emulsions became destabilized with an increase in pH and temperature. The droplets turned unstable and irregular due to excessive NaCl concentration, caused by electrostatic repulsion between the microgel particles. This study presents a novel way to form smart and uniform Pickering emulsions with the application potential in food, cosmetics, and drug delivery, etc.

Preparation of Temperature-Responsive Films Based on PNVCL Microgel with Varying Sizes and Cross-Linking Degrees for Cell Harvesting

This work reports preparing thermal responsive poly (N-isovinylcaprolactam) (PNVCL) microgel based films for cell growth and detachment. PNVCL microgels of hydrated size ranging from 386 to 815 nm (25 °C) and different crosslinking degree are prepared. The PNVCL microgels can be rapidly and massively deposited on glass by spin coating method. Atomic force microscopy (AFM) and water contact angle (WCA) are used to study the influence of crosslinking degree and particle size on the surface morphology, stability, and hydrophilicity of PNVCL microgel film. The cell activity of the desorbed cells is quantitatively characterized employing human normal lung epithelial cells (BEAS-2B). The results show that BEAS-2B cells can be desorbed quickly from the film in 30 min, and the optical density (OD) value of desorbed cells incubated after 3 d increases by approximately 52% compared to the control group. This study broadens the selection of temperature-sensitive film for cell harvesting, and provides a new tool for the quantitative characterization of desorbed cells.

The Effects of Incorporating Nanoclay in NVCL-NIPAm Hydrogels on Swelling Behaviours and Mechanical Properties

Following the formulation development from a previous study utilising N-vinylcaprolactam (NVCL) and N-isopropylacrylamide (NIPAm) as monomers, poly(ethylene glycol) dimethacrylate (PEGDMA) as a chemical crosslinker, and Irgacure 2959 as photoinitiator, nanoclay (NC) is now incorporated into the selected formulation for enhanced mechanical performance and swelling ability. In this research, two types of NC, hydrophilic bentonite nanoclay (NCB) and surface-modified nanoclay (NCSM) of several percentages, were included in the formulation. The prepared mixtures were photopolymerised, and the fabricated gels were characterised through Fourier transform infrared spectroscopy (FTIR), cloud-point measurements, ultraviolet (UV) spectroscopy, pulsatile swelling, rheological analysis, and scanning electron microscopy (SEM). Furthermore, the effect of swelling temperature, NC types, and NC concentration on the hydrogels' swelling ratio was studied through a full-factorial design of experiment (DOE). The successful photopolymerised NC-incorporated NVCL-NIPAm hydrogels retained the same lower critical solution temperature (LCST) as previously. Rheological analysis and SEM described the improved mechanical strength and polymer orientation of gels with any NCB percentage and low NCSM percentage. Finally, the temperature displayed the most significant effect on the hydrogels' swelling ability, followed by the NC types and NC concentration. Introducing NC to hydrogels could potentially make them suitable for applications that require good mechanical performance.

Comparing the Kinetic Hydrate Inhibition Performance of Linear versus Branched Polymers

Kinetic hydrate inhibitors (KHIs) are a chemical method of preventing gas hydrate plugging of oil and gas production flow lines. The main ingredient in a KHI formulation is one or more water-soluble amphiphilic polymers. Poly(N-vinyl caprolactam) (PVCap) is an unbranched polymer and a well-known industrial KHI, often used as a yardstick to compare the performance of new polymers. The effect of branching PVCap on KHI performance has been investigated by polymerizing the VCap monomer in the presence of varying amounts of trimethylolpropane triacrylate, pentaerythritol tetraacrylate, or bis-pentaerythritol hexaacrylate cross-linkers to give PVCap polymers with 3, 4, and 6 branches, respectively. If the ratio of cross-linker to VCap was too high (6:1 to 8:1), gelling and/or poor water solubility was observed, giving short polymer chains and poor KHI efficacy. For higher ratios (30:1 to 60:1), it was found that the concentration of the polymer needed to give total inhibition of structure II tetrahydrofuran hydrate crystal growth could be lowered by using tribranched rather than linear PVCap. Slow constant cooling (1 °C/h) gas hydrate experiments with a synthetic natural gas in steel rocking cells at 76 bar were also carried out. A small improvement in KHI performance was observed for one of the branched PVCaps compared with a linear PVCap. Branched and linear poly(N-isopropylmethacrylamide) (PNIPMAm) polymers were also investigated in the gas hydrate system, but there was no benefit observed when branching this polymer class.

Multiresponsive Core-Shell Microgels Functionalized by Nitrilotriacetic Acid

Stimuli-responsive microgels with ionizable functional groups offer versatile applications, e.g., by the uptake of oppositely charged metal ions or guest molecules such as drugs, dyes, or proteins. Furthermore, the incorporation of carboxylic groups enhances mucoadhesive properties, crucial for various drug delivery applications. In this work, we successfully synthesized poly{N-vinylcaprolactam-2,2'-[(5-acrylamido-1-carboxypentyl)azanediyl]diacetic acid} [p(VCL/NTAaa)] microgels containing varying amounts of nitrilotriacetic acid (NTA) using precipitation polymerization. We performed fundamental characterization by infrared (IR) spectroscopy and dynamic and electrophoretic light scattering. Despite their potential multiresponsiveness, prior studies on NTA-functionalized microgels lack in-depth analysis of their stimuli-responsive behavior. This work addresses this gap by assessing the microgel responsiveness to temperature, ionic strength, and pH. Morphological investigations were performed via NMR relaxometry, nanoscale imaging (AFM and SEM), and reaction calorimetry. Finally, we explored the potential application of the microgels by conducting cytocompatibility experiments and demonstrating the immobilization of the model protein cytochrome c in the microgels.

Thermosensitive Hydrogel-Functionalized Mesoporous Silica Nanoparticles for Parenteral Application of Chemotherapeutics

Hydrogels can offer many opportunities for drug delivery strategies. They can be used on their own, or their benefits can be further exploited in combination with other nanocarriers. Intelligent hydrogels that react to changes in the surrounding environment can be utilized as gatekeepers and provide sustained on-demand drug release. In this study, a hybrid nanosystem for temperature- and pH-sensitive delivery was prepared from MCM-41 nanoparticles grafted with a newly synthesized thermosensitive hydrogel (MCM-41/AA-g-PnVCL). The initial particles were chemically modified by the attachment of carboxyl groups. Later, they were grafted with agar (AA) and vinylcaprolactam (VCL) by free radical polymerization. Doxorubicin was applied as a model hydrophilic chemotherapeutic drug. The successful formulation was confirmed by FT-IR and TGA. Transmission electron microscopy and dynamic light scattering analysis showed small particles with negative zeta potential. Their release behaviour was investigated in vitro in media with different pH and at different temperatures. Under tumour simulating conditions (40 °C and pH 4.0), doxorubicin was almost completely released within 72 h. The biocompatibility of the proposed nanoparticles was demonstrated by in vitro haemolysis assay. These results suggest the possible parenteral application of the newly prepared hydrogel-functionalized mesoporous silica nanoparticles for temperature-sensitive and pH-triggered drug delivery at the tumour site.

Stimuli-responsive dynamic hydrogels: design, properties and tissue engineering applications

The field of tissue engineering and regenerative medicine has been evolving at a rapid pace with numerous novel and interesting biomaterials being reported. Hydrogels have come a long way in this regard and have been proven to be an excellent choice for tissue regeneration. This could be due to their innate properties such as water retention, and ability to carry and deliver a multitude of therapeutic and regenerative elements to aid in better outcomes. Over the past few decades, hydrogels have been developed into an active and attractive system that can respond to various stimuli, thereby presenting a wider control over the delivery of the therapeutic agents to the intended site in a spatiotemporal manner. Researchers have developed hydrogels that respond dynamically to a multitude of external as well as internal stimuli such as mechanics, thermal energy, light, electric field, ultrasonics, tissue pH, and enzyme levels, to name a few. This review gives a brief overview of the recent developments in such hydrogel systems which respond dynamically to various stimuli, some of the interesting fabrication strategies, and their application in cardiac, bone, and neural tissue engineering.

Mechanochemical Synthesis of Stimuli Responsive Microgels

Mechanochemical approaches are widely used for the efficient, solvent-free synthesis of organic molecules, however their applicability to the synthesis of functional polymers has remained underexplored. Herein, we demonstrate for the first time that mechanochemically triggered free-radical polymerization allows solvent- and initiator-free syntheses of structurally and morphologically well-defined complex functional macromolecular architectures, namely stimuliresponsive microgels. The developed mechanochemical polymerization approach is applicable to a variety of monomers and allows synthesizing microgels with tunable chemical structure, variable size, controlled number of crosslinks and reactive functional end-groups.

Upconversion Nanoparticles Intercalated in Large Polymer Micelles for Tumor Imaging and Chemo/Photothermal Therapy

Frontiers in theranostics are driving the demand for multifunctional nanoagents. Upconversion nanoparticle (UCNP)-based systems activated by near-infrared (NIR) light deeply penetrating biotissue are a powerful tool for the simultaneous diagnosis and therapy of cancer. The intercalation into large polymer micelles of poly(maleic anhydride-alt-1-octadecene) provided the creation of biocompatible UCNPs. The intrinsic properties of UCNPs (core@shell structure NaYF₄:Yb³⁺/Tm³⁺@NaYF₄) embedded in micelles delivered NIR-to-NIR visualization, photothermal therapy, and high drug capacity. Further surface modification of micelles with a thermosensitive polymer (poly-N-vinylcaprolactam) exhibiting a conformation transition provided gradual drug (doxorubicin) release. In addition, the decoration of UCNP micelles with Ag nanoparticles (Ag NPs) synthesized in situ by silver ion reduction enhanced the cytotoxicity of micelles at cell growth temperature. Cell viability assessment on Sk-Br-3, MDA-MB-231, and WI-26 cell lines confirmed this effect. The efficiency of the prepared UCNP complex was evaluated in vivo by Sk-Br-3 xenograft regression in mice for 25 days after peritumoral injection and photoactivation of the lesions with NIR light. The designed polymer micelles hold promise as a photoactivated theranostic agent with quattro-functionalities (NIR absorption, photothermal effect, Ag NP cytotoxicity, and Dox loading) that provides imaging along with chemo- and photothermal therapy enhanced with Ag NPs.

Blue-ringed octopus-inspired microneedle patch for robust tissue surface adhesion and active injection drug delivery

Intratissue topical medication is important for the treatment of cutaneous, mucosal or splanchnic diseases. However, penetrating surface barriers to providing adequate and controllable drug delivery while guaranteeing adhesion in bodily fluids remains challenging. Here, the predatory behavior of the blue-ringed octopus inspired us with a strategy to improve topical medication. For effective intratissue drug delivery, the active injection microneedles were prepared in a manner inspired by the teeth and venom secretion of blue-ringed octopus. With on demand release function guided by temperature-sensitive hydrophobic and shrinkage variations, these microneedles can supply adequate drug delivery at an early stage and then achieve the long-term release stage. Meanwhile, the bionic suction cups were developed to facilitate microneedles to stay firmly in place (>10 kilopascal) when wet. With wet bonding ability and multiple delivery mode, this microneedle patch achieved satisfactory efficacy, such as accelerating the ulcers' healing speed or halting early tumor progression.

Thermoresponsive mixed polymer brush to effectively control the adhesion and separation of stem cells by altering temperature

During the last few decades, thermoresponsive materials for modulating cell adhesion have been investigated for the application of tissue engineering. In this study, we developed thermoresponsive mixed polymer brushes consisting of poly(N-isopropylacrylamide) (PNIPAAm) and poly(N,N-dimethylaminopropylacrylamide) (PDMAPAAm). The mixed polymer brushes were prepared on a glass substrate via the reversible addition-fragmentation chain transfer polymerization of DMAPAAm and subsequent atom transfer radical polymerization of NIPAAm. The mixed polymer brushes grafted to glass exhibited increased cationic properties by increasing the grafted PDMAPAAm length. The shrinking and extension of PNIPAAm exposed and concealed PDMAPAAm, respectively, indicating that the surface cationic properties can be controlled by changing the temperature. At 37 ​°C, the prepared mixed polymer brushes enhanced cell adhesion through their electrostatic interactions with cells. They also exhibited various thermoresponsive adhesion and detachment properties using various types of cells, such as mesenchymal stem cells. Temperature-controlled cell adhesion and detachment behavior differed between cell types. Using the prepared mixed polymer brush, we separated MSCs from adipocytes and HeLa cells by simply changing the temperature. Thus, the thermoresponsive mixed polymer brushes may be used to separate mesenchymal stem cells from their differentiated or contaminant cells by altering the temperature.

Thermoresponsive Conductivity of Graphene-Based Fibers

Smart materials are versatile material systems which exhibit a measurable response to external stimuli. Recently, smart material systems have been developed which incorporate graphene in order to share on its various advantageous properties, such as mechanical strength, electrical conductivity, and thermal conductivity as well as to achieve unique stimuli-dependent responses. Here, a graphene fiber-based smart material that exhibits reversible electrical conductivity switching at a relatively low temperature (60 °C), is reported. Using molecular dynamics (MD) simulation and density functional theory-based non-equilibrium Green's function (DFT-NEGF) approach, it is revealed that this thermo-response behavior is due to the change in configuration of amphiphilic triblock dispersant molecules occurring in the graphene fiber during heating or cooling. These conformational changes alter the total number of graphene-graphene contacts within the composite material system, and thus the electrical conductivity as well. Additionally, this graphene fiber fabrication approach uses a scalable, facile, water-based method, that makes it easy to modify material composition ratios. In all, this work represents an important step forward to enable complete functional tuning of graphene-based smart materials at the nanoscale while increasing commercialization viability.

Recent applications of phase-change materials in tumor therapy and theranostics

Phase-change materials (PCMs) are a type of special material which can store and release a large amount of thermal energy without any significant temperature change. They are emerging in recent years as a promising functional material in tumor therapy and theranostics due to their accurate responses to the temperature variations, biocompatibility and low toxicity. In this review, we will introduce the main types of PCMs and their desirable physiochemical properties for biomedical applications, and highlight the recent progress of PCM's applications in the modulated release of antitumor drugs, with special attentions paid to various ways to initiate temperature-dependent phase change, the concomitant thermal therapy and its combination with or activation of other therapies, particularly unconventional therapies. We will also summarize PCM's recent applications in tumor theranostics, where both drugs and imaging probes are delivered by PCMs for controlled drug release and imaging-guided therapy. Finally, the future perspectives and potential limitations of harnessing PCMs in tumor therapy will be discussed.

LCST-UCST Transition Property of a Novel Retarding Swelling and Thermosensitive Particle Gel

Super absorbent resin particles used as profile control and water plugging agent remains a deficiency that the particles swells with high speed when absorbing water, resulting in low strength and limited depth of migration. To address this issue, we proposed a thermosensitive particle gel possessing the upper critical solution temperature (UCST), which was synthesized from hydrophobically modified poly(vinyl alcohol)s (PVA) with glutaraldehyde (GA) as a cross-linker. The structure of the hydrogel was characterized by Fourier transform infrared spectrophotometer (FTIR) and nuclear magnetic resonance (NMR). The thermosensitive-transparency measurement and swelling experiment show that the hydrophobic-modified PVA solutions and corresponding hydrogels exhibited thermosensitive phase transition behaviors with lower critical solution temperature (LCST) and UCST. The results indicated that the temperature-induced phase transition behavior of CHPVA hydrogels leads to their retarding swelling property and great potential as an efficient water plugging agent with excellent temperature and salt resistance.

Poly(N-vinylcaprolactam)-Gold Nanorods-5 Fluorouracil Hydrogels: In the Quest of a Material for Topical Therapies against Melanoma Skin Cancer

Chemically crosslinked hydrogels based on poly(N-vinylcaprolactam) (PNVCL) were synthetized by a photoinitiated chemical method. A galactose-based monomer, 2-lactobionamidoethyl methacrylate (LAMA), and N-vinylpyrrolidone (NVP) were added with the aim to improve the physical and chemical properties of hydrogels. The effects of both comonomers on the swelling ratio (Q), volume phase transition temperature (VPTT), glass transition temperature (T_g), and Young's moduli by mechanical compression below and above the VPTT were studied. Gold nanorods (GNRDs) and 5-fluorouracil (5FU) were embedded into the hydrogels, to study the drug release profiles with and without the excitation of GNRDs by irradiation in the near-infrared region (NIR). Results showed that the addition of LAMA and NVP increased the hydrogels' hydrophilicity, elasticity, and VPTT. The loading of GNRDs in the hydrogels changed the release rate of 5FU when irradiated intermittently with an NIR laser. The present study reports on the preparation of a hydrogel-based platform of PNVCL-GNRDs-5FU as a potential hybrid anticancer hydrogel for chemo/photothermal therapy that could be applied against skin cancer for topical 5FU delivery.

Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers

Four-dimensional printing is primarily based on the concept of 3D printing technology. However, it requires additional stimulus and stimulus-responsive materials. Poly-N-vinylcaprolactam is a temperature-sensitive polymer. Unique characteristics of poly-N-vinylcaprolactam -based hydrogels offer the possibility of employing them in 4D printing. The main aim of this study is to alter the phase transition temperature of poly-N-vinylcaprolactam hydrogels. This research focuses primarily on incorporating two additional monomers with poly-N-vinylcaprolactam: Vinylacetate and N-vinylpyrrolidone. This work contributes to this growing area of research by altering (increasing and decreasing) the lower critical solution temperature of N-vinylcaprolactam through photopolymerisation. Poly-N-vinylcaprolactam exhibits a lower critical solution temperature close to the physiological temperature range of 34-37 °C. The copolymers were analysed using various characterisation techniques, such as FTIR, DSC, and UV-spectrometry. The main findings show that the inclusion of N-vinylpyrrolidone into poly-N-vinylcaprolactam increased the lower critical solution temperature above the physiological temperature. By incorporating vinylacetate, the lower critical solution temperature dropped to 21 °C, allowing for potential self-assembly of 4D-printed objects at room temperature. In this case, altering the lower critical solution temperature of the material can potentially permit the transformation of the 4D-printed object at a particular temperature.

Synthesis of NVCL-NIPAM Hydrogels Using PEGDMA as a Chemical Crosslinker for Controlled Swelling Behaviours in Potential Shapeshifting Applications

Stimuli-responsive hydrogels have recently gained interest within shapeshifting applications due to their capabilities to expand in water and their altering swelling properties when triggered by stimuli, such as pH and heat. While conventional hydrogels lose their mechanical strength during swelling, most shapeshifting applications require materials to have mechanical strength within a satisfactory range to perform specified tasks. Thus, stronger hydrogels are needed for shapeshifting applications. Poly (N-isopropylacrylamide) (PNIPAm) and poly (N-vinyl caprolactam) (PNVCL) are the most popular thermosensitive hydrogels studied. Their close-to-physiological lower critical solution temperature (LCST) makes them superior candidates in biomedicine. In this study, copolymers made of NVCL and NIPAm and chemically crosslinked using poly (ethylene glycol) dimethacrylate (PEGDMA) were fabricated. Successful polymerisation was proven via Fourier transform infrared spectroscopy (FTIR). The effects of incorporating comonomer and crosslinker on the LCST were found minimal using cloud-point measurements, ultraviolet (UV) spectroscopy, and differential scanning calorimetry (DSC). Formulations that completed three cycles of thermo-reversing pulsatile swelling are demonstrated. Lastly, rheological analysis validated the mechanical strength of PNVCL, which was improved due to the incorporation of NIPAm and PEGDMA. This study showcases potential smart thermosensitive NVCL-based copolymers that can be applied in the biomedical shapeshifting area.

Polymeric Micellar Systems-A Special Emphasis on "Smart" Drug Delivery

Concurrent developments in anticancer nanotechnological treatments have been observed as the burden of cancer increases every year. The 21st century has seen a transformation in the study of medicine thanks to the advancement in the field of material science and nanomedicine. Improved drug delivery systems with proven efficacy and fewer side effects have been made possible. Nanoformulations with varied functions are being created using lipids, polymers, and inorganic and peptide-based nanomedicines. Therefore, thorough knowledge of these intelligent nanomedicines is crucial for developing very promising drug delivery systems. Polymeric micelles are often simple to make and have high solubilization characteristics; as a result, they seem to be a promising alternative to other nanosystems. Even though recent studies have provided an overview of polymeric micelles, here we included a discussion on the "intelligent" drug delivery from these systems. We also summarized the state-of-the-art and the most recent developments of polymeric micellar systems with respect to cancer treatments. Additionally, we gave significant attention to the clinical translation potential of polymeric micellar systems in the treatment of various cancers.

Injectable Thermosensitive Nanocomposites Based on Poly(N-vinylcaprolactam) and Silica Particles for Localized Release of Hydrophilic and Hydrophobic Drugs

The systemic delivery of drugs employed by conventional methods has shown to be less effective than a localized delivery system. Many drugs have the effectiveness reduced by fast clearance, increasing the amount required for an efficient treatment. One way to overcome this drawback is through the use of thermoresponsive polymers that undergo a sol-gel transition at physiological temperature, allowing their injection directly in the desired site. In this work, thermosensitive nanocomposites based on poly(N-vinylcaprolactam) and silica particles with 80 and 330 nm were synthesized to be employed as delivery systems for hydrophobic (naringin) and hydrophilic (doxorubicin hydrochloride) drugs. The insertion of SiO₂ increased the rheological properties of the nanocomposite at 37 °C, which helps to prevent its diffusion away from the site of injection. The synthesized materials were also able to control the drug release for a period of 7 days under physiological conditions. Due to its higher hydrophobicity and better interaction with the PNVCL matrix, naringin presented a more controlled release. The Korsmeyer-Peppas model indicated different release mechanisms for each drug. At last, a preliminary in vitro study of DOX-loaded nanocomposites cultured with L929 and MB49 cells showed negligible toxic effects on healthy cells and better efficient inhibition of carcinoma cells.

Synthesis of N-vinyl isothiocyanates and carbamates by the cleavage of NH-1,2,3-triazoles with one-carbon electrophiles

Metal-free cascade reaction of NH-1,2,3-triazoles with one-carbon electrophiles, such as thiophosgene and triphosgene, led to N-vinylated ring cleavage products. Using this approach the synthesis of N-vinylisothiocyanates from NH-triazoles and thiophosgene was achieved. A variety of multifunctional compounds, such as N-vinylcarbamates, unsymmetrical vinylureas, carbamothioates, etc. was prepared by a one-pot method from NH-triazoles, triphosgene and nucleophiles.

Polymeric micelles and cancer therapy: an ingenious multimodal tumor-targeted drug delivery system

Since the beginning of pharmaceutical research, drug delivery methods have been an integral part of it. Polymeric micelles (PMs) have emerged as multifunctional nanoparticles in the current technological era of nanocarriers, and they have shown promise in a range of scientific fields. They can alter the release profile of integrated pharmacological substances and concentrate them in the target zone due to their improved permeability and retention, making them more suitable for poorly soluble medicines. With their ability to deliver poorly soluble chemotherapeutic drugs, PMs have garnered considerable interest in cancer. As a result of their remarkable biocompatibility, improved permeability, and minimal toxicity to healthy cells, while also their capacity to solubilize a wide range of drugs in their micellar core, PMs are expected to be a successful treatment option for cancer therapy in the future. Their nano-size enables them to accumulate in the tumor microenvironment (TME) via the enhanced permeability and retention (EPR) effect. In this review, our major aim is to focus primarily on the stellar applications of PMs in the field of cancer therapeutics along with its mechanism of action and its latest advancements in drug and gene delivery (DNA/siRNA) for cancer, using various therapeutic strategies such as crossing blood-brain barrier, gene therapy, photothermal therapy (PTT), and immunotherapy. Furthermore, PMs can be employed as "smart drug carriers," allowing them to target specific cancer sites using a variety of stimuli (endogenous and exogenous), which improve the specificity and efficacy of micelle-based targeted drug delivery. All the many types of stimulants, as well as how the complex of PM and various anticancer drugs react to it, and their pharmacodynamics are also reviewed here. In conclusion, commercializing engineered micelle nanoparticles (MNPs) for application in therapy and imaging can be considered as a potential approach to improve the therapeutic index of anticancer drugs. Furthermore, PM has stimulated intense interest in research and clinical practice, and in light of this, we have also highlighted a few PMs that have previously been approved for therapeutic use, while the majority are still being studied in clinical trials for various cancer therapies.

Fabrication of 3D cylindrical thermosensitive hydrogels as supports for cell culture and detachment of tubular cell sheets

Pseudo interpenetrating vinyl-caprolactam (VCL) based thermosensitive tubular hydrogels with a volume phase transition temperature, VPTT, around 35 °C, have been prepared by combining two different crosslinkers, a di-methacrylate (C1) and a di-vinyl urea (C2). The molar ratio between the two crosslinkers (for a global crosslinker molar percentage of 1.9) has shown to play a key role on the properties of the hydrogel. Increasing the amount of di-vinyl urea, leads to transparent but rather fragile materials and to a lower extent of thermosensitivity, that is, to a lower variation in the hydrogel swelling upon temperature change. However, tubes prepared with a selected crosslinker molar ratio C1/C2 of 65/35 provided a compromise between transparency, thermosensitivity and maneuverability and were, thus, evaluated as supports for cell culture using premyoblastic cells. These hydrogels, used as supports, allow for surface adhesion and cell proliferation until confluence, and eventually an efficient monolayer detachment (and transplant to a 3D-printed polylactic acid (PLA) support) through a controlled drop in temperature. As a result, this method permits to obtain tubular tissue constructs with potential applications in tissue engineering such as in the elaboration of vascular grafts.

A Development of New Material for 4D Printing and the Material Properties Comparison between the Conventional and Stereolithography Polymerised NVCL Hydrogels

The term 4D printing refers to the idea that the shape or properties of a printed object can be changed when an external stimulus is applied. In this contribution, a temperature-responsive polymer Poly (N-vinyl caprolactam) (PNVCL), which is normally prepared via radical free polymerization, was used to justify the 4D printing concept. As a result, by using a Stereolithography (SLA) 3D printer, 4D prints were successfully prepared. These prints were able to demonstrate intelligent and reversible expansion/shrinkage behaviour as the temperature increases and decreases. Additionally, in order to examine the differences in chemical structure, thermal properties, mechanical properties, and swelling behaviours of the photopolymerised and printed parts, a series of characterisation tests, including Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), goniometry, tensile test, gel fraction measurement and pulsatile swelling study were performed on this study. In conclusion, the differences between polymerisation methods are significant; despite their chemical structures and thermal properties being similar, there were significant differences with regard to tensile properties, swellability and wettability of samples. The implications of conducting this study are remarkable, not only in providing a new way of preparing NVCL, but also in demonstrating the possibility of using 4D printed NVCL for practical applications.

Effect of Imidazolium Nitrate Ionic Liquids on Conformational Changes of Poly(N-vinylcaprolactam)

Detailed information about molecular interactions and conformational changes of polymeric components in the presence of ionic liquids (ILs) is essential for designing novel polymeric ionic liquid-based biomaterials. In biomaterials science and technology, thermoresponsive polymers (TRPs) are widely viewed as potential candidates for the fabrication of biorelated medical devices. Here, we synthesized thermoresponsive poly(N-vinyl-caprolactam) (PVCL) polymer and investigated the effects of imidazolium-based ILs (1-ethyl-3-methyl imidazolium nitrate and 1-butyl-3-methylimidazolium nitrate) with common anion and different cations on the phase transition behavior of PVCL aqueous solution. The impact of ILs on the phase transition behavior of PVCL was monitored by using UV-visible absorption spectra, steady-state fluorescence spectroscopy, thermal fluorescence spectroscopy, and temperature dependent dynamic light scattering. Results showed significant changes in the absorbance, molecular interactions, agglomeration, and coil to globule transition behaviors of PVCL in the presence of two ILs. PVCL aqueous solution showed significant conformational changes after the addition of ILs.

Oxyvinylenelactam Polymers-A New Class of Lactam-Based Kinetic Hydrate Inhibitor Polymers

The deployment of kinetic hydrate inhibitors (KHIs) is a chemical method for the prevention of gas hydrate plugging in gas, condensate, and oil production flow lines. Polymers made using the monomer N-vinylcaprolactam (VCap) are one of the most common KHI classes. Alternative classes of polymers containing caprolactam groups are rare. Here, we present a study on oxyvinylenelactam polymers and copolymers with pendant piperidone or caprolactam groups. Low-molecular-weight homo- and copolymers were obtained. The nonrotating vinylene groups impart rigidity to the polymer backbone. Poly(oxyvinylenecaprolactam) (POVCap) was insoluble in water, but poly(oxyvinylenepiperidone) (POVPip) and OVPip:OVCap copolymers with 60+ mol % OVPip were soluble with low cloud points. KHI screening tests were carried out using the slow constant cooling method in steel rocking cells. POVPip was water soluble with no cloud point up to 95 °C but showed a poor KHI performance. In contrast, OVPip:OVCap copolymers with about 60-70 mol % OVPip were also water soluble and showed a reasonable KHI performance, better than that of poly(N-vinylpyrrolidone) but not as good as that of poly(N-vinylcaprolactam). Surprisingly, several additives known to be good synergists for VCap-based polymers showed negligible synergy or were antagonistic with the 62:38 OVPip:OVCap copolymer with regard to lowering the onset temperature of hydrate formation. However, a blend with hexabutylguanidinium chloride showed a strong effect to delay the onset of rapid hydrate formation.

Mechanoresponsive diselenide-crosslinked microgels with programmed ultrasound-triggered degradation and radical scavenging ability for protein protection

In the context of controlled delivery and release, proteins constitute a delicate class of cargo requiring advanced delivery platforms and protection. We here show that mechanoresponsive diselenide-crosslinked microgels undergo controlled ultrasound-triggered degradation in aqueous solution for the release of proteins. Simultaneously, the proteins are protected from chemical and conformational damage by the microgels, which disintegrate to water-soluble polymer chains upon sonication. The degradation process is controlled by the amount of diselenide crosslinks, the temperature, and the sonication amplitude. We demonstrate that the ultrasound-mediated cleavage of diselenide bonds in these microgels facilitates the release and activates latent functionality preventing the oxidation and denaturation of the encapsulated proteins (cytochrome C and myoglobin) opening new application possibilities in the targeted delivery of biomacromolecules.

Synthesis and characterization of dual-responsive poly(N-vinylcaprolactam-co-N-methylolacrylamide) nanogels

This article reports the synthesis of poly(N-vinylcaprolactam-co-N-methylolacrylamide) (P(NVCL-co-NMA)) nanogels and investigates their thermo-/pH-responsive behavior. The formation of nanogels was synthesized using free radical emulsion polymerization by varying the monomer composition of NVCL:NMA, and their molecular structure was characterized by ¹H-NMR and FTIR. It was found that the nanogels were successfully prepared, and the nanogels exhibited LCST-type phase transition behavior. Cloud point transition temperature (T_c) was studied as a function of copolymer composition, MBA concentration, and pH of the solution by exploring their changes in turbidity using UV-vis spectrophotometer. Our studies reveal that T_c nanogels increased with increasing concentration of NMA, which is due to the hydrophilicity of NMA. Our research also demonstrated that the increase in MBA percentage could decrease the T_c of the synthesized nanogels. Interestingly, P(NVCL-co-NMA) nanogels showed not only a thermoresponsive behavior but also a pH response with increasing T_c in a strong acidic environment owing to the H-bonds within the polymer chains. The results show that nanogels with initial monomer composition of NVCL and NMA of 75% and 25%, respectively, and using 4% of MBA showed T_c around 35°C at pH 7.4. In addition, DLS studies also confirmed this result since the particle sizes became much larger after surpassing the temperature of 35°C. Due to this founding, such nanogels might have potential application in controlled release. Nevertheless, further studies regarding the adjustment of T_c are still needed.

Tunable two-step shape and dimensional changes with temperature of a PNIPAM/CNC hydrogel

PNIPAM (poly(N-isopropylacrylamide)), a well-studied thermo-responsive polymer, undergoes conformational transition around 32 °C. On the other hand, cellulose nanocrystals (CNCs), as a promising and biocompatible material, has rarely been introduced to the PNIPAM-based fibrous hydrogel system. CNCs' impact on the temperature responsive behaviors of hydrogels, either in single layer or bilayer hydrogel systems, is yet to be investigated. In this work, stable well dispersed PNIPAM/CNC suspensions (with various CNC proportions) are prepared and electrospun into nanofiber membranes. The corresponding hydrogels are then obtained via UV-induced crosslinking. CNCs are found to exert a significant constraint effect on hydrogel swelling when it exceeded 5 wt% but a negligible effect on contraction. The difference between hydrogels with various CNC proportions regarding their temperature responsive behaviors is utilized to fabricate bilayer hydrogels. These bilayer samples are capable of generating 3D geometries when they come into contact with water for the first time via anisotropic swelling between the two layers and changing their dimension reversibly in the following swelling and contraction. In addition, these geometries are found to be highly tunable via the finely tuned thickness ratio between the two layers. This promising feature would significantly extend the application of these materials in tissue engineering where a controllable geometry of the culture substrate is of great importance.

Poly(N-vinylcaprolactam) containing solid lipid polymer hybrid nanoparticles for controlled delivery of a hydrophilic drug gemcitabine hydrochloride

Folic acid tagged and hydrophilic polymer containing solid lipid nanoparticles (SLNs) were formulated for the controlled and targeted delivery of gemcitabine, a hydrophilic drug. Drug loaded SLNs were prepared by double emulsion method and optimized by 32 level factorial design. Then, a hydrophilic polymer, namely, poly(N-vinylcaprolactam) (PVCL) was incorporated in the optimized SLN batch in the first aqueous phase (W1) to obtain solid lipid polymer hybrid nanoparticles (SLPHNs) that were further decorated with folic acid (F-SLPHNs). TEM analysis of SLNs and SLPHNs revealed the spherical shape with no aggregation while SLPHNs showed higher % EE. SLPHNs exhibited limited burst release of gemcitabine compared to SLNs as well as lower overall % release. All the formulations showed good cytocompatibility against MDA-MB-231 cell lines and folic acid-tagged hybrid particles (F-SLPHNs) showed remarkably higher cellular uptake.

Methacrylic acid based microgels and hybrid microgels

Methacrylic acid based microgels have got much consideration in the last two decades because of their potential uses in different fields owing to their responsive behaviour towards external stimuli. Synthesis, properties and uses of methacrylic acid based microgels and their hybrids have been critically reviewed in this article. With minute change in external stimuli such as pH and ionic strength of medium, these microgels show quick swelling/deswelling reversibly. The methacrylic acid based microgels have been widely reported for applications in the area of nanotechnology, drug delivery, sensing and catalysis due to their responsive behaviour. A critical review of current research development in this field along with upcoming perception is presented here. This discussion is concluded with proposed probable future studies for additional growth in this field of research.

Thermoresponsive dendritic oligoethylene glycols

Monodispersed molecules of low molar masses showing thermoresponsiveness are appealing both for mechanism investigation of the thermally-modulated dehydration and aggregation on molecular levels and for designing functional intelligent materials. In the present report, thermoresponsive properties of a homologous series of monodispersed dendritic macromolecules carrying three-, four- or six-fold dendritic oligoethylene glycol (OEG) segments were investigated. These dendritic macromolecules carry either methoxyl or ethoxyl terminals, and have different cores (alcohol, methyl ester or methacryloyl) to exhibit different overall hydrophilicity. They show characteristic thermoresponsive properties with sharp phase transitions when suitable structural units are combined. Three structural factors determine their phase transition temperatures, including the cores, branching density and peripheral terminals. Thermally-induced collapse and aggregation are monitored with temperature-varied NMR spectroscopy at the microscale level and optical microscopy at the macroscale level. At elevated temperature, these dendritic macromolecules undergo fast exchange between the dehydrated and the hydrated states. These dendritic macromolecules afford structure-dependent confinement to guest dyes through their multi-valent interactions.

Adsorption of soft NIPAM nanogels at hydrophobic and hydrophilic interfaces: Conformation of the interfacial layers determined by neutron reflectivity

The application of stimuli-responsive microgels and nanogels in drug delivery, catalysis, sensing, and coatings is restricted currently by the limited understanding of the factors influencing their adsorption dynamics and structural changes at interfaces. We have used neutron reflectivity to resolve, on the Ångström scale, the structure of 5% crosslinked N-isopropylacrylamide nanogels at both hydrophobic and hydrophilic interfaces in situ, as a function of temperature and bulk nanogel concentration. Our results show that the higher flexibility given by the low crosslinker content allows for a more ordered structure and packing. The adsorption of the thermoresponsive nanogels is primarily driven by temperature, more specifically its proximity to its volume phase transition temperature, while concentration plays a secondary role. Hydrophobic interactions drive the conformation of the first layer at the interface, which plays a key role in influencing the overall nanogel structure. The mobility of the first layer at the air-water interface as opposed to the interfacial confinement at the solid (SiC8)-liquid interface, results in a different conformation, a more compact and less deformed packing structure, which ultimately drives the structure of the subsequent layers. The evidence for the different structural conformations determined by the degree of hydrophobicity of the interface provides new knowledge, which is essential for the development of further applications. The key role of hydrophobic interactions in driving adsorption and interfacial behavior was also confirmed by fluid AFM experiments which visualized adherence of the nanogels to SiC8 modified surfaces.

Preparation and Characterization of Thermoresponsive Poly(N-vinylisobutyramide) Microgels

Microgels are soft, adaptive materials exhibiting various properties not only like hydrogels and microparticles but also like macromolecules, colloids, and surfactants. To widen the range of their biomedical and environmental applications, the exploration of an alternative for poly(N-alkylacrylamide)s without potential safety risks is of great importance. In this article, thermoresponsive poly(N-vinylisobutyramide) (PNVIBA) microgels of uniform size were synthesized with NVIBA as a monomer and N,N'-5-oxanonamethyene-bis-N-vinylacetamide as a cross-linker in the presence of sodium dodecyl sulfate by aqueous free radical precipitation polymerization. The introduction of cationic groups into PNVIBA microgels was also accomplished using N-vinylformamide (NVF) as a comonomer and the subsequent conversion of NVF into vinylamine by hydrolysis.