Polymerizations with elemental sulfur: A novel route to high sulfur content polymers for sustainability, energy and defense

Converting inorganic sulfur into degradable thermoplastics and adhesives by copolymerization with cyclic disulfides

Converting elementary sulfur into sulfur-rich polymers provides a sustainable strategy to replace fossil-fuel-based plastics. However, the low ring strain of eight-membered rings, i.e., S8 monomers, compromises their ring-opening polymerization (ROP) due to lack of an enthalpic driving force and as a consequence, poly(sulfur) is inherently unstable. Here we report that copolymerization with cyclic disulfides, e.g., 1,2-dithiolanes, can enable a simple and energy-saving way to convert elementary sulfur into sulfur-rich thermoplastics. The key strategy is to combine two types of ROP-both mediated by disulfide bond exchange-to tackle the thermodynamic instability of poly(sulfur). Meanwhile, the readily modifiable sidechain of the cyclic disulfides provides chemical space to engineer the mechanical properties and dynamic functions over a large range, e.g., self-repairing ability and degradability. Thus, this simple and robust system is expected to be a starting point for the organic transformation of inorganic sulfur toward sulfur-rich functional and green plastics.

Advanced Polymers in Cathodes and Electrolytes for Lithium-Sulfur Batteries: Progress and Prospects

Lithium-sulfur (Li-S) batteries, which store energy through reversible redox reactions with multiple electron transfers, are seen as one of the promising energy storage systems of the future due to their outstanding advantages. However, the shuttle effect, volume expansion, low conductivity of sulfur cathodes, and uncontrollable dendrite phenomenon of the lithium anodes have hindered the further application of Li-S batteries. In order to solve the problems and clarify the electrochemical reaction mechanism, various types of materials, such as metal compounds and carbon materials, are used in Li-S batteries. Polymers, as a class of inexpensive, lightweight, and electrochemically stable materials, enable the construction of low-cost, high-specific capacity Li-S batteries. Moreover, polymers can be multifunctionalized by obtaining rich structures through molecular design, allowing them to be applied not only in cathodes, but also in binders and solid-state electrolytes to optimize electrochemical performance from multiple perspectives. The most widely used areas related to polymer applications in Li-S batteries, including cathodes and electrolytes, are selected for a comprehensive overview, and the relevant mechanisms of polymer action in different components are discussed. Finally, the prospects for the practical application of polymers in Li-S batteries are presented in terms of advanced characterization and mechanistic analysis.

Advances in natural polysaccharides for gold recovery from e-waste: Recent developments in preparation with structural features

The increasing demand for gold because of its high market price and its wide use in the electronic industry has attracted interest in gold recovery from electronic waste (e-waste). Gold is being dumped as solid e-waste which contains gold concentrations ten times higher than gold ores. Adsorption is a widely used approach for extracting gold from e-waste due to its simplicity, low cost, high efficiency, and reusability of adsorbent material. Natural polysaccharides received increased attention due to their natural abundance, multi-functionality, biodegradability, and nontoxicity. In this review, a brief history, and advancements in this technology were evaluated with recent developments in the preparation and mechanism advancements of natural polysaccharides for efficient gold recovery. Moreover, we have discussed some bifunctional modified polysaccharides with detailed gold adsorption mechanisms. The modified adsorbent materials developed from polysaccharides coupled with inorganic/organic functional groups would demonstrate an efficient technology for the development of new bio-based materials for efficient gold recovery from e-waste. Also, future views are recommended for highlighting the direction to achieve fast and effective gold recovery from e-waste in a friendly and sustainable manner.

Chapter 1: The Astrobiology Primer 3.0

The Astrobiology Primer 3.0 (ABP3.0) is a concise introduction to the field of astrobiology for students and others who are new to the field of astrobiology. It provides an entry into the broader materials in this supplementary issue of Astrobiology and an overview of the investigations and driving hypotheses that make up this interdisciplinary field. The content of this chapter was adapted from the other 10 articles in this supplementary issue and thus represents the contribution of all the authors who worked on these introductory articles. The content of this chapter is not exhaustive and represents the topics that the authors found to be the most important and compelling in a dynamic and changing field.

Chapter 9: Life as We Don't Know It

While Earth contains the only known example of life in the universe, it is possible that life elsewhere is fundamentally different from what we are familiar with. There is an increased recognition in the astrobiology community that the search for life should steer away from terran-specific biosignatures to those that are more inclusive to all life-forms. To start exploring the space of possibilities that life could occupy, we can try to dissociate life from the chemistry that composes it on Earth by envisioning how different life elsewhere could be in composition, lifestyle, medium, and form, and by exploring how the general principles that govern living systems on Earth might be found in different forms and environments across the Solar System. Exotic life-forms could exist on Mars or Venus, or icy moons like Europa and Enceladus, or even as a shadow biosphere on Earth. New perspectives on agnostic biosignature detection have also begun to emerge, allowing for a broader and more inclusive approach to seeking exotic life with unknown chemistry that is distinct from life as we know it on Earth.

Inverse vulcanization induced oxygen modified porous polysulfides for efficient sorption of heavy metals

The applications of polysulfides derived from natural plant oil and sulfur via the inverse vulcanization in the removal of heavy metals from aqueous solutions suffered from their low porosity and scarce surface functionality because of their hydrophobic surfaces and bulk characteristics. In this study, polysulfides from sulfur and palm oil (PSPs) with significantly enhanced porosity (13.7-24.1 m2/g) and surface oxygen-containing functional groups (6.9-8.6 wt.%) were synthesized with the optimization of process conditions including reaction time, temperature, and mass ratios of sulfur/palm oil/NaCl/sodium citrate. PSPs were applied as sorbents to remove heavy metals present in aqueous solutions. The integration of porosity and oxygen modification allowed a fast kinetic (4.0 h) and enhanced maximum sorption capacities for Pb(II) (218.5 mg/g), Cu(II) (74.8 mg/g), and Cr(III) (68.4 mg/g) at pH 5.0 and T 298 K comparing with polysulfides made without NaCl/sodium citrate. The sorption behaviors of Pb(II), Cu(II), and Cr(III) on PSPs were highly dependent on the solution pH values and ionic strength. The sorption presented excellent anti-interference capability for the coexisting cations and anions. The sorption processes were endothermic and spontaneous. This work would guide the preparation of porous polysulfides with surface modification as efficient sorbents to remediate heavy metals from aqueous solutions.

Step-growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives

The bulk radical polymerization of bis(aziridine) with molten elemental sulfur resulted in brittle, cross-linked polymers. However, when the bis(aziridine) was treated with elemental sulfur in the presence of an organobase, the ring-opening reaction of aziridine with oligosulfide anions occurred, leading to the formation of linear polymers by step-growth polymerization. These newly synthesized polymers possess repeating units containing a sulfonamide or amide functional moiety and oligosulfide bonds with an average sulfur segment of about two. A small molecular model reaction confirmed the nucleophilic addition reaction of elemental sulfur to aziridine. It was verified that S-S dynamic bond exchange takes place in the presence of an organic base within the linear chains. The mixture of the synthesized polysulfides with pyridine exhibits exceptional adhesive properties when applied to steel, and aluminum substrates. Notably, these prepared adhesives displayed good reusability due to the dynamic S-S exchange and complete recyclability due to their solution processability. This elemental sulfur-involved polymerization approach represents an innovative method for the synthesis of advanced sulfur-containing polymers, demonstrating the potential for various applications in adhesives and beyond.

Recent Progress in Sulfur-Containing High Refractive Index Polymers for Optical Applications

The development in the field of high refractive index materials is a crucial factor for the advancement of optical devices with advanced features such as image sensors, optical data storage, antireflective coatings, light-emitting diodes, and nanoimprinting. Sulfur plays an important role in high refractive index applications owing to its high molar refraction compared to carbon. Sulfur exists in multiple oxidation states and can exhibit various stable functional groups. Over the last few decades, sulfur-containing polymers have attracted much attention owing to their wide array of applications governed by the functional group of sulfur present in the polymer repeat unit. The interplay of refractive index and various other polymer properties contributes to successfully implementing a specific polymer material in optical applications. The focus on developing optoelectronic devices induced an ever-increasing need to integrate different functional materials to achieve the devices' full potential. Several devices that see the potential use of sulfur in high refractive index materials are reviewed in the study. Like sulfur, selenium also exhibits high molar refraction and unique chemical properties, making it an essential field of study. This review covers the research and development in the field of sulfur and selenium in different forms of functionality, focusing on the chemistry of bonding and the optical properties of the polymers containing the heteroatoms mentioned above. The strategy and rationale behind incorporating heteroatoms in a polymer matrix to produce high-refractive-index materials are also described in the present review.

Dithiophosphoric Acids for Polymer Functionalization

Dithiophosphoric acids (DTPAs) are an intriguing class of compounds that are sourced from elemental sulfur and white phosphorus and are prepared from the reaction of phosphorus pentasulfide with alcohols. The electrophilic addition of DTPAs to alkenes and unsaturated olefinic substrates is a known reaction, but has not been applied to polymer synthesis and polymer functionalization. We report on the synthesis and application of DTPAs for the functionalization of challenging poly-enes, namely polyisoprene (PI) and polynorbornene (pNB) prepared by ring-opening metathesis polymerization (ROMP). The high heteroatom content within DTPA moieties impart intriguing bulk properties to poly-ene materials after direct electrophilic addition reactions to the polymer backbone introducing DTPAs as side chain groups. The resulting materials possess both enhanced optical and flame retardant properties vs the poly-ene starting materials. Finally, we demonstrate the ability to prepare crosslinked polydiene films with di-functional DTPAs, where the crosslinking density and thermomechanical properties can be directly tuned by DTPA feed ratios.

The Role of Dithiocarbamate Catalysts in the Diversification of Sulfur Speciation Towards Anionic Sulfur

Recently, there has been growing interest in the implementation of various "catalysts" to further diversify the substrate scope for inverse vulcanization reactions. While there have been several proposals on the mechanism of how these catalysts work, the speciation of sulfur in these mixtures has remained elusive. As a key component to understanding when and if these catalysts are appropriate, we sought to elucidate the role of dithiocarbamate species in inverse vulcanization reactions by attempting to characterize the speciation of sulfur. The reaction efficacy for various substrates containing different functional groups with sulfur, either with or without a metal dithiocarbamate, potassium diethyldithiocarbamate (K-DTC), suggests the formation of a rapidly fluctuating sulfur speciation and, most importantly, the presence of anionic sulfur. The work concludes with some suggestions on best practices for the utilization of dithiocarbamate catalysts based on our results.

Copolymerization Involving Sulfur-Containing Monomers

Incorporating sulfur (S) atoms into polymer main chains endows these materials with many attractive features, including a high refractive index, mechanical properties, electrochemical properties, and adhesive ability to heavy metal ions. The copolymerization involving S-containing monomers constitutes a facile method for effectively constructing S-containing polymers with diverse structures, readily tunable sequences, and topological structures. In this review, we describe the recent advances in the synthesis of S-containing polymers via copolymerization or multicomponent polymerization techniques concerning a variety of S-containing monomers, such as dithiols, carbon disulfide, carbonyl sulfide, cyclic thioanhydrides, episulfides and elemental sulfur (S8). Particularly, significant focus is paid to precise control of the main-chain sequence, stereochemistry, and topological structure for achieving high-value applications.

Synthesis of Deuterated and Sulfurated Polymers by Inverse Vulcanization: Engineering Infrared Transparency via Deuteration

The synthesis of deuterated, sulfurated, proton-free, glassy polymers offers a route to optical polymers for infrared (IR) optics, specifically for midwave IR (MWIR) photonic devices. Deuterated polymers have been utilized to enhance neutron cross-sectional contrast with proteo polymers for morphological neutron scattering measurements but have found limited utility for other applications. We report the synthesis of perdeuterated d14-(1,3-diisopropenylbenzene) with over 99% levels of deuteration and the preparation of proton-free, perdeuterated poly(sulfur-random-d14-(1,3-diisopropenylbenzene)) (poly(S-r-d14-DIB)) via inverse vulcanization with elemental sulfur. Detailed structural analysis and quantum computational calculations of these reactions demonstrate significant kinetic isotope effects, which alter mechanistic pathways to form different copolymer microstructures for deutero vs proteo poly(S-r-DIB). This design also allows for molecular engineering of MWIR transparency by shifting C-H bond vibrations around 3.3 μm/3000 cm-1 observed in proteo poly(S-r-DIB) to 4.2 μm/2200 cm-1. Furthermore, the fabrication of thin-film MWIR optical gratings made from molding of deuterated-sulfurated, proton-free poly(S-r-d14-DIB) is demonstrated; operation of these gratings at 3.39 μm is achieved successfully, while the proteo poly(S-r-DIB) gratings are opaque at these wavelengths, highlighting the promise of MWIR sensors and compact spectrometers from these materials.

Molecular Structure and Properties of Sulfur-Containing High Refractive Index Polymer Optical Materials

High refractive index polymers (HRIPs) are widely used in lenses, waveguide, antireflective layer and encapsulators, especially the advanced fields of augmented/virtual reality (AR / VR) holographic technology and photoresist for chip manufacturing. In order to meet the needs of different applications, the development of HRIPs focuses not only on the increase in refractive index but also on the balance of other properties. Sulfur-containing high refractive index polymers have received extensive attention from researchers due to their excellent properties. In recent years, not only ultrahigh refractive index sulfur-containing polymers have been continuously developed, but also low dispersion, low birefringence, high transparency, good mechanical properties, and machinability have been studied. The design of HRIPs is generally based on formulas and existing experience. In fact, molecular structure and properties are closely related. Mastering the structure-property relationship helps researchers to develop high refractive index polymer materials with balanced properties. This review briefly introduces the preparation methods of sulfur-containing high refractive index polymers, and summarizes the structure-property relationship between the sulfur-containing molecular structure and optical properties, mechanical properties, thermal properties, etc. Finally, the important role of synergistic effect in the synthesis of HRIPs and the prospect of future research on HRIPs are proposed.

Unraveling the rheology of inverse vulcanized polymers

Multiple relaxation times are used to capture the numerous stress relaxation modes found in bulk polymer melts. Herein, inverse vulcanization is used to synthesize high sulfur content (≥50 wt%) polymers that only need a single relaxation time to describe their stress relaxation. The S-S bonds in these organopolysulfides undergo dissociative bond exchange when exposed to elevated temperatures, making the bond exchange dominate the stress relaxation. Through the introduction of a dimeric norbornadiene crosslinker that improves thermomechanical properties, we show that it is possible for the Maxwell model of viscoelasticity to describe both dissociative covalent adaptable networks and living polymers, which is one of the few experimental realizations of a Maxwellian material. Rheological master curves utilizing time-temperature superposition were constructed using relaxation times as nonarbitrary horizontal shift factors. Despite advances in inverse vulcanization, this is the first complete characterization of the rheological properties of this class of unique polymeric material.

A novel theoretical method to determine the effective optical properties of high refractive index nanocomposites

The continuous development of advanced optical devices towards high performance, miniaturization and integration has led to an increasing demand for high refractive index optical materials. Nanocomposites - made from high refractive index inorganic nanoparticles and good processability polymers - combine the advantages of both materials to create a synergistic effect. However, the diversity and complexity of the composites make laboratory preparation less efficient. Therefore, to prepare composites that meet the refractive index requirements, it is essential to predict the effective optical properties at different wavelengths. This study proposes a finite element parametric retrieval (FEPR) method to calculate the effective complex refractive index of nanocomposites (meff). The effects of the ratio of film thickness to particle diameter, particle arrangement, particle volume fraction (fv) and particle diameter (d) on meff are considered. The results demonstrate that changing the spatial arrangement, volume fraction and diameter of the particles can cause changes in the scattering effect of particles or the interaction between the electromagnetic waves and the particles, resulting in changes in the meff. Compared with effective medium theory (EMT), the FEPR method can be used to characterise the meff values in complex cases through finite element parametric modelling. The FEPR method is an efficient and accurate method for predicting the effective optical properties of nanocomposites, and can also be applied to the design and development of materials to discover the factors influencing the properties and variation patterns from large amounts of data, and to obtain predictive models that can guide the design of new materials.

On the Mechanism of the Inverse Vulcanization of Elemental Sulfur: Structural Characterization of Poly(sulfur-random-(1,3-diisopropenylbenzene))

Organosulfur polymers, such as those derived from elemental sulfur, are an important new class of macromolecules that have recently emerged via the inverse vulcanization process. Since the launching of this new field in 2013, the development of new monomers and organopolysulfide materials based on the inverse vulcanization process is now an active area in polymer chemistry. While numerous advances have been made over the last decade concerning this polymerization process, insights into the mechanism of inverse vulcanization and structural characterization of the high-sulfur-content copolymers that are produced remain challenging due to the increasing insolubility of the materials with a higher sulfur content. Furthermore, the high temperatures used in this process can result in side reactions and complex microstructures of the copolymer backbone, complicating detailed characterization. The most widely studied case of inverse vulcanization to date remains the reaction between S₈ and 1,3-diisopropenylbenzene (DIB) to form poly(sulfur-random-1,3-diisopropenylbenzene)(poly(S-r-DIB)). Here, to determine the correct microstructure of poly(S-r-DIB), we performed comprehensive structural characterizations of poly(S-r-DIB) using nuclear magnetic resonance spectroscopy (solid state and solution) and analysis of sulfurated DIB units using designer S-S cleavage polymer degradation approaches, along with complementary de novo synthesis of the sulfurated DIB fragments. These studies reveal that the previously proposed repeating units for poly(S-r-DIB) were incorrect and that the polymerization mechanism of this process is significantly more complex than initially proposed. Density functional theory calculations were also conducted to provide mechanistic insights into the formation of the derived nonintuitive microstructure of poly(S-r-DIB).

Electrochemical Synthesis of Poly(trisulfides)

With increasing interest in high sulfur content polymers, there is a need to develop new methods for their synthesis that feature improved safety and control of structure. In this report, electrochemically initiated ring-opening polymerization of norbornene-based cyclic trisulfide monomers delivered well-defined, linear poly(trisulfides), which were solution processable. Electrochemistry provided a controlled initiation step that obviates the need for hazardous chemical initiators. The high temperatures required for inverse vulcanization are also avoided resulting in an improved safety profile. Density functional theory calculations revealed a reversible "self-correcting" mechanism that ensures trisulfide linkages between monomer units. This control over sulfur rank is a new benchmark for high sulfur content polymers and creates opportunities to better understand the effects of sulfur rank on polymer properties. Thermogravimetric analysis coupled with mass spectrometry revealed the ability to recycle the polymer to the cyclic trisulfide monomer by thermal depolymerization. The featured poly(trisulfide) is an effective gold sorbent, with potential applications in mining and electronic waste recycling. A water-soluble poly(trisulfide) containing a carboxylic acid group was also produced and found to be effective in the binding and recovery of copper from aqueous media.

Reaction between 1,3,5-Triisopropylbenzene and Elemental Sulfur Extending the Scope of Reagents in Inverse Vulcanization

Inverse vulcanization utilizes an organic compound as reagent for crosslinking elemental sulfur to result in corresponding polymeric material with a high sulfur content. This work, employing 1,3,5-triisopropylbenzene (TIPB) as the reagent, demonstrates the first attempt on extending the scope of crosslinking agents of inverse vulcanization to saturate compounds. Under nuclear magnetic spectroscopic analysis, the reactions between TIPB and elemental sulfur take places through ring-opening reaction of S₈ resulting in sulfur radicals at sulfur chain ends, radicals transferring to isopropyl groups of TIPB, and radical coupling reactions between carbon radicals and sulfur radicals. The obtained products are similar to the sulfur polymers from conventional inverse vulcanization processes and show self-healing property.

Ligand Decomposition during Nanoparticle Synthesis: Influence of Ligand Structure and Precursor Selection

Aliphatic amine and carboxylic acid ligands are widely used as organic solvents during the bottom-up synthesis of inorganic nanoparticles (NPs). Although the ligands' ability to alter final NP properties has been widely studied, side reactivity of these ligands is emerging as an important mechanism to consider. In this work, we study the thermal decomposition of common ligands with varying functional groups (amines and carboxylic acids) and bond saturations (from saturated to polyunsaturated). Here, we investigate how these ligand properties influence decomposition in the absence and presence of precursors used in NP synthesis. We show that during the synthesis of inorganic chalcogenide NPs (Cu₂ZnSnS₄, Cu _x S, and SnS _x ) with metal acetylacetonate precursors and elemental sulfur, the ligand pyrolyzes, producing alkylated graphitic species. Additionally, there was less to no ligand decomposition observed during the sulfur-free synthesis of ZnO and CuO with metal acetylacetonate precursors. These results will help guide ligand selection for NP syntheses and improve reaction purity, an important factor in many applications.

Photoactive Organo-Sulfur Polymers for Hydrogen Generation

Herein, we report the synthesis of photoactive polymeric organo-sulfur (POS) materials. These polymers absorb light in the ultraviolet/visible and near-infrared region of the solar spectrum, and upon irradiation, they reduce water to hydrogen (H₂ ). The decoration of POS materials with nitrile (-CN) groups is found to be the critical factor for enhanced interactions with the co-catalyst, Ni₂ P, leading to greater H₂ evolution rates compared to the nitrile-free POS material.

Raman analysis of inverse vulcanised polymers

Raman analysis has been found to provide otherwise hard to obtain information on inverse vulcanised polymers, including their homogeneity, sulfur rank, and unpolymerised sulfur content.

The recent development of inverse vulcanized polysulfide as an alternative adsorbent for heavy metal removal in wastewater

Inverse vulcanized polysulfides have been used as low-cost and effective adsorbents to remediate heavy metals in wastewater. Inverse vulcanization introduces sustainable polysulfide synthesis by solving the rapid desulfurization problem of unstable polysulfides, and provides superior performance compared to conventional commercial adsorbents. The review discussed the brief applications of the inverse vulcanized polysulfides to remove heavy metal wastewater and emphasized the modified synthesis processes for enhanced uptake ratios. The characteristics of polysulfide adsorbents, which play a vital role during the removal process are highlighted with a proper discussion of the interaction between metal ions and polysulfides. The review paper concludes with remarks on the future outlook of these low-cost adsorbents with high selectivity to heavy metals. These polysulfide adsorbents can be prepared using a wide variety of crosslinker monomers including organic hydrocarbons, cooking oils, and agro-based waste materials. They have shown good surface area and excellent metal-binding capabilities compared to the commercially available adsorbents. Proper postmodification processes have enabled the benefits of repetitive uses of the polysulfide adsorbents. The improved surface area obtained by appropriate choice of crosslinkers, modified synthesis techniques, and regeneration through post-modification has made inverse vulcanized polysulfides capable of removing.

Fabrication and evaluation of novel sulfur/epoxy resin composites

In recent years, and with the progress of oil and natural gas purification processes, it has been noticed that huge quantities of sulfur are produced with millions of tons as byproducts, which is considered a dangerous substance that may threaten the safety and health of the environment. So, this study aims to maximize elemental sulfur benefits in construction applications, especially in the coating sector. In this study, sulfur has been modified to be used with epoxy as a high-performance coating material. Firstly, sulfur was modified with linseed oil at 160 °C. The modified sulfur was chemically characterized by using FTIR and XRD. After that, epoxy was then partially replaced by polymeric sulfur with different weight percentages starting from 10 to 40%. Then, the hardener was added to form cured sulfur/epoxy composites. Different techniques were used to examine the morphology of the prepared composites such as AFM, polarizing microscope, and SEM. The thermal study was also conducted by TGA. In addition, the mechanical properties were comprehensively studied including Young’s modulus, toughness, tensile strength, hardness, and adhesion. The results approved that Young’s modulus, toughness, tensile strength, hardness, and adhesion of the PC4 composite have been improved by 54%, 87%, 15%, 40%, and 33%, respectively. Moreover, the prepared composites give high thermal stability than virgin epoxy. The overall results approved that the epoxy can be partially replaced by modified sulfur with high weight ratios reached to 40%.

Self-healable fiber-reinforced vitrimer composites: overview and future prospects

To achieve sustainable development goals, approaches towards the preparation of recyclable and healable polymeric materials is highly attractive. Self-healing polymers and thermosets based on bond-exchangeable dynamic covalent bonds, so called "vitrimers" could be a great effort in this direction. In order to match the industrial importance, enhancement of mechanical strength without sacrificing the bond exchange capability is a challenging issue, however, such concerns can be overcome through the developments of fiber-reinforced vitrimer composites. This article covers the outstanding features of fiber-reinforced vitrimer composites, including their reprocessing, recycling and self-healing properties, together with practical applications and future perspectives of this unique class of materials.

Supramolecular Design Strategy of a Water-Soluble Diphenylguanidine-Cyclodextrin Polymer Inclusion Complex

Diphenylguanidine (DPG) is a widely used secondary accelerator for the vulcanization of natural rubber (NR) latex. However, its low water solubility and high toxicity limit its use in high-end NR products. In this study, a water-soluble inclusion complex of DPG and a β-cyclodextrin polymer (β-CDP), termed DPG-β-CDP, was prepared through supramolecular interactions and characterized using Fourier-transform infrared spectroscopy, ¹H NMR, scanning electron microscopy, and UV-vis spectroscopy techniques. In comparison with that of DPG, the water solubility of DPG-β-CDP was greatly enhanced because of the water-soluble host molecule. The molar ratio of DPG to the CD unit in β-CDP was determined to be 1:1. At 25 °C, the binding constant of DPG-β-CDP was found to be 9.2 × 10⁵ L/mol by UV-vis spectroscopy. The proposed method for forming inclusion complexes with high potential for use as water-soluble vulcanization accelerators is promising.

Design Strategy for Vulcanization Accelerator of Diphenylguanidine/Cyclodextrin Inclusion Complex for Natural Rubber Latex Foam with Enhancing Performance

Vulcanization is an essential process to obtain high-performance rubber products. Diphenylguanidine (DPG) is often used as the secondary accelerator in the vulcanization process of natural rubber (NR) latex. However, DPG would make NR latex emulsion exhibit gelation, resulting in the negative vulcanization efficiency. In addition, exposure to DPG might lead to some physiological diseases during the production process of DPG doped NR latex. Hydroxypropyl-β-cyclodextrin (HP-β-CD) with the hydrophobic interior and hydrophilic exterior has the advantages of good water solubility, high bioavailability, reliable stability, and low toxicity. In this study, the inclusion complex of diphenylguanidine-hydroxypropyl-β-cyclodextrin (DPG-HP-β-CD) is prepared by ball milling with a host-guest molar ratio of 1 : 1, which has also been applied to the foaming process of NR latex. The mechanical properties of DPG-HP-β-CD inclusion complex/natural rubber latex foam (DPG-HP-β-CD/NRLF) have been significantly improved, including the tensile strength, elongation at break, hardness, compression set, resilience, and antiaging performance. Further, the usage of DPG has been reduced, leading to the reduction of toxicity and environmental hazards.

Mechanochemical synthesis of inverse vulcanized polymers

Inverse vulcanization, a sustainable platform, can transform sulfur, an industrial by-product, into polymers with broad promising applications such as heavy metal capture, electrochemistry and antimicrobials. However, the process usually requires high temperatures (≥159 °C), and the crosslinkers needed to stabilize the sulfur are therefore limited to high-boiling-point monomers only. Here, we report an alternative route for inverse vulcanization—mechanochemical synthesis, with advantages of mild conditions (room temperature), short reaction time (3 h), high atom economy, less H₂S, and broader monomer range. Successful generation of polymers using crosslinkers ranging from aromatic, aliphatic to volatile, including renewable monomers, demonstrates this method is powerful and versatile. Compared with thermal synthesis, the mechanochemically synthesized products show enhanced mercury capture. The resulting polymers show thermal and light induced recycling. The speed, ease, versatility, safety, and green nature of this process offers a more potential future for inverse vulcanization, and enables further unexpected discoveries.

Inverse vulcanization is a process that enables to convert sulfur, a by-product of the petroleum industry, into polymers. Here the authors report a synthetic method of inverse vulcanization via mechanochemical synthesis; compared to thermal routes, a broader range of monomers can be used, and the protocol yields materials with enhanced mercury capture capacity.

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide

Soluble sulfur (S₈) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS₂) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS₂) and S₈, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS₂ solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.

Sulfur in Dynamic Covalent Chemistry

Sulfur has been important in dynamic covalent chemistry (DCC) since the beginning of the field. Mainly as part of disulfides and thioesters, dynamic sulfur-based bonds (DSBs) have a leading role in several remarkable reactions. Part of this success is due to the almost ideal properties of DSBs for the preparation of dynamic covalent systems, including high reactivity and good reversibility under mild aqueous conditions, the possibility of exploiting supramolecular interactions, access to isolable structures, and easy experimental control to turn the reaction on/off. DCC is currently witnessing an increase in the importance of DSBs. The chemical flexibility offered by DSBs opens the door to multiple applications. This Review presents an overview of all the DSBs used in DCC, their applications, and remarks on the interesting properties that they confer on dynamic chemical systems, especially those containing several DSBs.

Synthesis of poly(thioester sulfonamide)s via the Ring-Opening Copolymerization of Cyclic Thioanhydride with N-Sulfonyl Aziridine Using Mild Phosphazene base

Providing access to diverse polymer structures is highly desirable, which helps to explore new polymer materials. Poly(thioester sulfonamide)s, combining both the advantages of thioesters and amides, however, have been rarely available in polymer chemistry. Here, we report the ring-opening copolymerization (ROCOP) of cyclic thioanhydride with N-sulfonyl aziridine using mild phosphazene base, resulting in well-defined poly(thioester sulfonamide)s with highly alternative structures, high yields, and controlled molecular weights. Additionally, benefiting from the mild catalytic process, this ROCOP can be combined with ROCOP of N-sulfonyl aziridines with cyclic anhydrides to produce novel block copolymers. This article is protected by copyright. All rights reserved.

Click Synthesis Enabled Sulfur Atom Strategy for Polymerization-Enhanced and Two-Photon Photosensitization

Facile tailoring of photosensitizers (PSs) with advanced and synergetic properties is highly expected to broaden and deepen photodynamic therapy (PDT) applications. Herein, a catalyst-free thiol-yne click reaction was employed to develop the sulfur atom-based PSs by using the in situ formed sulfur "heavy atom effect" to enhance the intersystem crossing (ISC), while such an effect can be remarkably magnified by the polymerization. The introduction of a tetraphenylpyrazine-based aggregation-induced emission (AIE) unit was also advantageous in PS design by suppressing their non-radiative decay to facilitate the ISC in the aggregated state. Besides, the resulting sulfur atom electron donor, together with a double-bond π bridge and AIE electron acceptor, created a donor-π-acceptor (D-π-A) molecular system with good two-photon excitation properties. Combined with the high singlet oxygen generation efficiency, the fabricated polymer nanoparticles exhibited an excellent in vitro two-photon-excited PDT towards cancer cells, therefore possessing a huge potential for the deep-tissue disease therapy.

Controlled Disassembly of Elemental Sulfur: An Approach to the Precise Synthesis of Polydisulfides

The usage of elemental sulfur (S₈ ) for constructing sulfur-containing polymers is of great significance in terms of sulfur resource utilization or fabrication of high-performance polymers. Currently, the random disassembly of S₈ hinders its direct use in the precise synthesis of sulfur-containing polymers. Herein, we provide an effective strategy for controlling the dismantlement of S₈ to synthesize polydisulfides, a promising category of dynamic bonds containing polymers. In this strategy, the completely alternating copolymerization of one sulfur atom, which is orderly derived from S₈ , with episulfides is achieved with MTBD (7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene) as catalyst and [PPN]SbF₆ ([PPN]⁺ is bis(triphenylphosphine)iminium) as cocatalyst. Delightedly, the living- polymerization feature, and the good monomer compatibility allows for the access to diverse polydisulfides. Furthermore, the density functional theory (DFT) was employed to elaborate the copolymerization process.

2,5-Diisopropenylthiophene by Suzuki-Miyaura cross-coupling reaction and its exploitation in inverse vulcanization: a case study

A novel thiophene derivative, namely 2,5-diisopropenylthiophene (DIT) was synthetized by Suzuki–Miyaura cross-coupling reaction (SMCCR). The influence of reaction parameters, such as temperature, solvent, stoichiometry of reagents, role of the base and reaction medium were thoroughly discussed in view of yield optimization and environmental impact minimization. Basic design of experiment (DoE) and multiple linear regression (MLR) modeling methods were used to interpret the obtained results. DIT was then employed as a comonomer in the copolymerization with waste elemental sulfur through a green process, inverse vulcanization (IV), to obtain sulfur-rich polymers named inverse vulcanized polymers (IVPs) possessing high refractive index (n ≈ 1.8). The DIT comonomer was purposely designed to (i) favor the IV process owing to the high reactivity of the isopropenyl functionalities and (ii) enhance the refractive index of the ensuing IVPs owing to the presence of the sulfur atom itself and to the high electronic polarizability of the π-conjugated thiophene ring. A series of random sulfur-r-diisopropenylthiophene (S-r-DIT) copolymers with sulfur content from 50 up to 90 wt% were synthesized by varying the S/DIT feed ratio. Spectroscopic, thermal and optical characterizations of the new IVPs were carried out to assess their main chemical–physical features.

A novel thiophene derivative, namely 2,5-diisopropenylthiophene (DIT) was synthetized by Suzuki–Miyaura cross-coupling reaction (SMCCR) and employed in the inverse vulcanization (IV) process achieving high-refractive-index sulfur-rich polymers.

Bitumen Binders Modified with Sulfur/Organic Copolymers

With the continuing growth of waste sulfur production from the petroleum industry processes, its utilization for the production of useful, low-cost, and environmentally beneficial materials is of primary interest. Elemental sulfur has a significant and established history in the modification of bitumen binders, while the sulfur-containing high-molecular compounds are limited in this field. Herein, we report a novel possibility to utilize the sulfur/organic copolymers obtained via the inverse vulcanization process as modifiers for bitumen binders. Synthesis and thermal characterization (TGA-DSC) of polysulfides derived from elemental sulfur (S8) and unsaturated organic species (dicyclopentadiene, styrene, and limonene) have been carried out. The performance of modified bitumen binders has been studied by several mechanical measurements (softening point, ductility, penetration at 25 °C, frass breaking point, adhesion to glass and gravel) and compared to the unmodified bitumen from the perspective of normalized requirements concerning polymer-modified bitumen. The interaction of bitumen binder with sulfur/organic modifier has been studied by means of FTIR spectroscopy and DSC measurements. The impact of the modification on the performance properties of bitumen has been demonstrated. The bitumen binders modified with sulfur/organic copolymers are in general less sensitive to higher temperatures (higher softening point up to 7 °C), more resistant to permanent deformations (lower penetration depth), and more resistant to aging processes without intrusive deterioration of parameters at lower temperatures. What is more, the modification resulted in significantly higher adhesion of bitumen binders to both glass (from 25% up to 87%) and gravel surfaces in combination with a lower tendency to form permanent deformations (more elastic behavior of the modified materials).

Exploration of Sulfur-Containing Nanoparticles: Synthesis, Microstructure Analysis, and Sensing Potential

In this work, three different sulfur sources such as sulfur powder, sodium sulfide, and sodium thiosulfate are selected to prepare sulfur-derived quantum dots (S-QDs), Na₂S-derived nanoparticles (NS-NPs), and Na₂S₂O₃^--derived QDs (NSO-QDs) in the presence of NaOH or assisted by hydrogen peroxide etching. The low sulfur percentage in the above three samples and the synthesis experiments in the presence of nitrogen/oxygen all support that poly(ethylene glycol) (PEG) plays an important role during the assembly process and the definition of sulfur dots is not accurate. For photophysical features, remarkable green quantum dots (S-QDs) possess an excitation-independent emission peak at 500 nm. But NS-NPs and NSO-QDs demonstrate observable shift tendency, and the evolution of emission profiles varies from 480 to 586 nm. NSO-QDs can be used as a fluorescent probe for highly selective and quantitative detection of Ni²⁺ in an aqueous solution in the presence of potential interfering ions with a low detection limit (0.18 μM) and a wide linear range (8-380 μM). Their reusability performance has also been demonstrated by employing dimethylglyoxime as the restoration reagent.