Poly(ionic liquids) in solid phase microextraction: Recent advances and perspectives

Extraction improvement of ionic liquid-functionalized silica by in situ anion-exchange for online solid-phase extraction of estrogens in honey

The accurate detection of analytes in honey is affected by the complex substrates, making it crucial to employ an effective sample preparation technique. In this work, an imidazolium ionic liquid was functionalized to the silica surface by a click reaction for solid-phase extraction (SPE) column, and in situ anion-exchange process was performed with different organic anions (dodecyl sulfonate, dodecyl benzene sulfonate, and naphthalene sulfonate). These SPE columns were evaluated through extracting the estrogens. The naphthalene sulfonate-based SPE column displayed the best extraction ability among these, and it was combined with high-performance liquid chromatography-diode array detection to establish an online enrichment and analysis system. Under the optimal test conditions, an online analytical method was developed, with high enrichment factors (1872-4744), wide linear ranges (0.0033-1.50, 0.0165-1.50, and 0.0330-1.50 μg g-1), and low detection limits (0.001-0.010 μg g-1). The method successfully determined several estrogens in some honey samples, and achieved satisfactory recovery results.

Synthesis of imidazolium ionic liquid immobilized on magnetic mesoporous silica: A sorbent material in a green micro-solid phase extraction of multiclass pesticides in water

In this study, we synthesized an imidazolium ionic liquid immobilized on magnetic mesoporous silica (IL-MMS) and evaluated its performance as a sorbent material for a green micro-solid phase extraction (μ-SPE) of multiclass pesticides in water. The synthesized IL-MMS was characterized by various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analyses (N2 adsorption/desorption), Vibrating Sample Magnetometer (VSM), energy-dispersive spectroscopy (EDS) and Field emission scanning electron microscopy (FESEM). Our synthesized IL-MMS demonstrated excellent magnetic properties (31.5 emu/g), high surface area (1177.4 m2/g), proper pore size (⁓4.2 nm) and volume (1.80 cm3/g). Under optimized extraction conditions, the IL-MMS exhibited a high adsorption capacity for a variety of pesticides, including organophosphates, carbamates, and pyrethroids. The proposed μ-SPE method using IL-MMS showed good linearity (R2 > 0.99), low limits of detection (LODs) ranging from 0.04 to 1.63 ng/L, and suitable recovery rate was between 82.4% and 109.8% for different pesticides. In addition, the method also exhibited excellent reproducibility, with relative standard deviations (RSDs) of less than 8% for both intra and inter-day precision. In overall, the synthesized IL-MMS has proven to be a highly promising material for sorbent-based micro-solid phase extraction (μ-SPE) of multiclass pesticides in water. With its simple, efficient, and eco-friendly approach to pesticide analysis, this method shows great potential for future pesticide detection and monitoring efforts due to its sensitivity, accuracy, and adaptability to various environmental conditions.

Solid phase microextraction device coupled with miniature mass spectrometry and mathematical model of its ion chronogram

Modern solid phase microextraction (SPME) device linked with mass spectrometry (SPME-MS) has evolved from producing ion chronogram as flat noisy signal to as unimodal-like signal. We designed a SPME device, which is closer in morphology to LC column, linked it with a miniature mass spectrometer (SPME-Mini MS), and proposed a mathematical model that elution of compound from the SPME device is equivalent to overlay of elution of the compound from the infinite LC columns with the lengths between 0 and the length of the device and it can generate an ion chronogram as right-skew unimodal signal. Rhodamine B as analyte was used for experimental verification and its unimodal signal was used to fit the parameters of a computer simulation program based on the model. The experimental results and simulations empirically cross-confirmed that SPME-Mini MS can generate ion chronogram as clean right-skew unimodal signal. Furthermore, the SPME-Mini MS system was used for quantitative analysis of psychotropic drugs (i.e. risperidone and aripiprazole) in artificial urine. The results preliminarily demonstrated that the system can utilize area under unimodal signal for quantitative analysis and has potential to be applied for on-site, fast and accurate quantification of drugs and other compounds.

Understanding the influence of polymeric ionic liquid sorbent coating substituents on cannabinoid and pesticide affinity in solid-phase microextraction

To understand factors that drive pesticide-cannabinoid selectivity in solid-phase microextraction (SPME), eight new polymeric ionic liquid (PIL) sorbent coatings were designed and compared to four previously reported PIL sorbent coatings for the extraction of pesticides. The four PIL sorbent coatings consisted of either vinylimidazolium or vinylbenzylimidazolium ILs with long alkyl chain substituents (i.e., -C8H17 or -C12H25) and bis[(trifluoromethyl)sulfonyl]imide ([NTf2-]) anions, from which the eight new PIL sorbent coatings were adapted. Modifications to the chemical structure of IL monomers and crosslinkers included incorporation of polymerizable p-styrenesulfonate or 3-sulfopropyl acrylate anions, the addition of aromatic moieties, and/or the addition of polar functional groups (i.e., -OH or -O- groups). A total of ten commonly regulated pesticides and six cannabinoids were examined in this study. The effect of salt on the solubility of pesticides and cannabinoids in aqueous solutions was assessed by determining their extraction efficiencies in the presence of varied methanol content. Differences in their solubilities appear to play a dominant role in enhancing pesticide-cannabinoid selectivity. The selectivity, represented as the ratio of pesticide total peak areas to cannabinoid total peak areas, also exhibited a moderate correlation to the affinity of the sorbent coatings towards both the pesticides and the cannabinoids. A positive correlation was observed for the pesticides and a negative correlation was observed for the cannabinoids, suggesting that selectivity was driven by more than the presence of salt in the samples. The sorbent coatings' affinity towards each class of analytes were examined to determine specific interactions that might influence selectivity. The two main structural modifications increasing pesticide-cannabinoid selectivity included the absence of aromatic moieties and the addition of hydrogen bond donor functional groups. Extractions of simple aromatic molecules as probes were performed under similar extraction conditions as the cannabinoids and confirmed the influence of hydrogen bonding interactions on sorbent coating affinity.

Cross-Linked Ionic Liquid Polymer for the Effective Removal of Ionic Dyes from Aqueous Systems: Investigation of Kinetics and Adsorption Isotherms

In the current study, we have synthesized an imidazolium based cross-linked polymer, namely, 1-vinyl-3-ethylimidazolium bis(trifluoromethylsulfonyl)imide (poly[veim][Tf2N]-TRIM) using trimethylolpropane trimethacrylate as cross linker, and demonstrated its efficiency for the removal of two extensively used ionic dyes—methylene blue and orange-II—from aqueous systems. The detailed characterization of the synthesized poly[veim][Tf2N]-TRIM was performed with the help of 1H NMR, TGA, FT-IR and FE-SEM analysis. The concentration of dyes in aqueous samples before and after the adsorption process was measured using an UV-vis spectrophotometer. The process parameters were optimised, and highest adsorption was obtained at a solution pH of 7.0, adsorbent dosage of 0.75 g/L, contact time of 7 h and dye concentrations of 100 mg/L and 5.0 mg/L for methylene blue and orange-II, respectively. The adsorption kinetics for orange-II and methylene blue were well described by pseudo-first-order and pseudo−second-order models, respectively. Meanwhile, the process of adsorption was best depicted by Langmuir isotherms for both the dyes. The highest monolayer adsorption capacities for methylene blue and orange-II were found to be 1212 mg/g and 126 mg/g, respectively. Overall, the synthesized cross-linked poly[veim][Tf2N]-TRIM effectively removed the selected ionic dyes from aqueous samples and provided >90% of adsorption efficiency after four cycles of adsorption. A possible adsorption mechanism between the synthesised polymeric adsorbent and proposed dyes is presented. It is further suggested that the proposed ionic liquid polymer adsorbent could effectively remove other ionic dyes and pollutants from contaminated aqueous systems.

Mussel Inspired Polydopamine as Silica Fibers Coating for Solid-Phase Microextraction

Commercial solid-phase microextraction fibers are available in a limited number of expensive coatings, which often contain environmentally harmful substances. Consequently, several different approaches have been used in the attempt to develop new sorbents that should possess intrinsic characteristics such as duration, selectivity, stability, and eco-friendliness. Herein we reported a straightforward, green, and easy coating method of silica fibers for solid-phase microextraction with polydopamine (PDA), an adhesive, biocompatible organic polymer that is easily produced by oxidative polymerization of dopamine in mild basic aqueous conditions. After FT-ATR and SEM characterization, the PDA fibers were tested via chromatographic analyses performed on UHPLC system using biphenyl and benzo(a)pyrene as model compounds, and their performances were compared with those of some commercial fibers. The new PDA fiber was finally used for the determination of selected PAHs in soot samples and the results compared with those obtained using the commercial PA fiber. Good reproducibility, extraction stability, and linearity were obtained using the PDA coating, which proved to be a very promising new material for SPME.

Ultrasound-assisted dispersive magnetic solid-phase extraction of cadmium, lead and copper ions from water and fruit juice samples using DABCO-based poly (ionic liquid) functionalized magnetic nanoparticles

A poly (ionic liquid) (PIL) functionalized magnetic nanoparticles methodology was developed and utilized as an efficient adsorbent for the simultaneous extraction of cadmium, lead, and copper ions from water and fruit juice samples. The novel adsorbent was fabricated by grafting DABCO-based PIL onto silica-coated Fe₃O₄ nanoparticles via copper (0)-mediated reversible-deactivation radical polymerization. Different techniques properly characterized the developed nanoparticles. The central composite design was used to analyze the simultaneous effects of various parameters on the extraction efficiency. The detection limits for water samples ranged between 3.2 and 9.2 ng.L^-1, and fruit juice samples varied from 0.0103 to 0.1082 μg.kg^-1. The recovery ranged from 94.1 to 101.3% and 93.6 to 105.1% for water and fruit juice samples, respectively. The relive measurement uncertainty ranged from 7.7 to 13.6%. The proposed method is rapid, sensitive, environmentally friendly, and useful for monitoring the residues of heavy metal ions in water and fruit juice samples.

Molecular imprinting technology and poly (ionic liquid)s: Promising tools with industrial application for the removal of acrylamide and furanic compounds from coffee and other foods

Coffee is one of the most consumed beverages in the world. Coffee provides to the consumer special sensorial characteristics, can help to prevent diseases, improves physical performance and increases focus. In contrast, coffee consumption supplies a significant source of substances with carcinogenic and genotoxic potential such as furan, hydroxymethylfurfural (HMF), furfural (F), and acrylamide (AA). The present review addresses the issues around the presence of such toxic substances formed in Maillard reaction (MR) during thermal treatments in food processing, from chemical and, toxicological perspectives, occurrences in coffee and other foods processed by heating. In addition, current strategies advantages and disadvantages are presented along with application of molecular imprinting technology (MIT) and poly (ionic liquid) s (PIL) as an alternative to reduce the furan, HMF, F and AA content in coffee and other foods.

Miniaturized green sample preparation approaches for pharmaceutical analysis

The development of green sample preparation procedures is an extremely important research field in which more and more applications are constantly being proposed in different areas, including pharmaceutical analysis. This review article is aimed at providing a general overview of the development of miniaturized green analytical sample preparation procedures in the pharmaceutical analysis field, with special focus on the works published between January 2017 and July 2021. Particular attention has been paid to the application of environmentally friendly solvents and sorbents as well as nanomaterials or high extraction capacity sorbents in which the solvent volumes and reagents amounts are drastically reduced, with their subsequent advantages from the sustainability point of view.

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.

Preparation of a new coating of graphene oxide/nickel complex on a nickelized metal surface for direct immersion solid phase microextraction of some polycyclic aromatic hydrocarbons

Background

Solid-phase microextraction (SPME) is a versatile sampling and sample preparation technology that possess a significant application in the extraction and pre-concentration of a broad range of micro-pollutants from different kind of matrices. Selection and preparation of an appropriate fiber substrate and coating materials have always been the main challenges of the SPME procedure. This paper introduces a high-efficiency metal-based SPME fiber with a new chemical coating of nickel/graphene oxide/nickel tetraazamacrocyclic complex (Ni/GO/NiTAM).

Result

The Ni/GO/NiTAM sorbent was electroless deposited onto the surface of an aluchrom (Alu) wire, and then the prepared fiber was employed for the extraction and pre-concentration of some PAHs before their HPLC–UV analysis. The prepared fiber characterization data were assessed using FE-SEM, EDX, XRD, FT-IR, and BET techniques. The method validation parameters, including the linearity range (LRs: 0.10 to 200.0 µg L⁻¹), the limit of detection (LODs: 0.03‒0.30 µg L⁻¹), and the limit of quantification (LOQs: 0.10–1.00 µg L⁻¹), under optimal conditions. The relative standard deviations (RSDs) of intra-day, inter-day, and single fiber repeatability (for the samples spiked at 25 µg L^‒1) were in the range of 0.32–2.94, 1.20–4.09, and 1.42‒4.39%, respectively. In addition, the technique recoveries (RR %) and enrichment factors (EF) were in the range of 83.10‒107.80% and 83–164, respectively.

Conclusion

The fiber fabrication was simple, and the applied materials were also economical and easily accessible. Alu metal has high physicochemical and mechanical stability and thus can be a good alternative for the substrate of the fragile commercial SPME fibers. High rigidity and durability, long service life, and high extraction capability are some of the other advantages of the offered fiber.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13065-021-00783-w.

Polymeric metal-containing ionic liquid sorbent coating for the determination of amines using headspace solid-phase microextraction

This study describes the design, synthesis, and application of polymeric ionic liquid sorbent coatings featuring nickel metal centers for the determination of volatile and semivolatile amines from water samples using headspace solid-phase microextraction. The examined polymeric ionic liquid (PIL) sorbent coatings were composed of two ionic liquid monomers (tetra(3-vinylimidazolium)nickel bis[(trifluoromethyl)sulfonyl]imide [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] and 1-vinyl-3-hexylimidazolium [HVIM⁺ ][NTf₂ ^- ]), and an ionic liquid cross-linker (1,12-di(3-vinylimidazolium)dodecane  [(VIM)₂ C₁₂ ²⁺ ] 2[NTf₂ ^- ]). With these ionic liquid monomers and cross-linkers, three different types of coatings were prepared: PIL 1 based on the neat [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] monomer, PIL 2 consisting of the [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] monomer with addition of cross-linker, and PIL 3 composed of the [HVIM⁺ ][NTf₂ ^- ] monomer and cross-linker. Analytical performance of the prepared sorbent coatings using headspace solid-phase microextraction gas chromatography-mass spectrometry was compared with the polydimethylsiloxane and polyacrylate commercial coatings. The PIL 2 sorbent coating yielded the highest enrichment factors ranging from 5500 to over 160 000 for the target analytes. The developed headspace solid-phase microextraction gas chromatography-mass spectrometry method was applied for the analysis of real samples (the concentration of amines was 200 μg/L), producing relative recovery values in the range of 90.9-120.0% (PIL 1) and 83.0-122.7% (PIL 2) from tap water, and 84.8-112.4% (PIL 1) and 79.2-119.3% (PIL 2) from lake water.

Recent Applications of Solid Phase Microextraction Coupled to Liquid Chromatography

Solid phase microextraction (SPME) is one of the most popular sample preparation methods which can be applied to organic compounds allowing the simultaneous extraction and pre-concentration of analytes from the sample matrix. It is based on the partitioning of the analyte between the extracting phase, generally immobilized on a fiber substrate, and the matrix (water, air, etc.), and has numerous advantages such as rapidity, simplicity, low cost, ease of use and automation, and absence of toxic solvents. Fiber SPME has been widely used in combination with various analytical instrumentation even if most of the work has been done coupling the extraction technique with gas and liquid chromatography (GC and LC). This manuscript presents an overview of the recent works (from 2010 to date) of solid phase microextraction coupled to liquid chromatography (SPME-LC) relevant to analytical applications performed using commercially available fibers or lab-made fibers already developed in previous papers, and to improved instrumental systems and approaches.

Nanoconfined Crosslinked Poly(ionic liquid)s with Unprecedented Selective Swelling Properties Obtained by Alkylation in Nanophase-Separated Poly(1-vinylimidazole)-l-poly(tetrahydrofuran) Conetworks

Despite the great interest in nanoconfined materials nowadays, nanocompartmentalized poly(ionic liquid)s (PILs) have been rarely investigated so far. Herein, we report on the successful alkylation of poly(1-vinylimidazole) with methyl iodide in bicontinuous nanophasic poly(1-vinylimidazole)-l-poly(tetrahydrofuran) (PVIm-l-PTHF) amphiphilic conetworks (APCNs) to obtain nanoconfined methylated PVImMe-l-PTHF poly(ionic liquid) conetworks (PIL-CNs). A high extent of alkylation (~95%) was achieved via a simple alkylation process with MeI at room temperature. This does not destroy the bicontinuous nanophasic morphology as proved by SAXS and AFM, and PIL-CNs with 15-20 nm d-spacing and poly(3-methyl-1-vinylimidazolium iodide) PIL nanophases with average domain sizes of 8.2-8.4 nm are formed. Unexpectedly, while the swelling capacity of the PIL-CN dramatically increases in aprotic polar solvents, such as DMF, NMP, and DMSO, reaching higher than 1000% superabsorbent swelling degrees, the equilibrium swelling degrees decrease in even highly polar protic (hydrophilic) solvents, like water and methanol. An unprecedented Gaussian-type relationship was found between the ratios of the swelling degrees versus the polarity index, indicating increased swelling for the nanoconfined PVImMe-l-PTHF PIL-CNs in solvents with a polarity index between ~6 and 9.5. In addition to the nanoconfined structural features, the unique selective superabsorbent swelling behavior of the PIL-CNs can also be utilized in various application fields.

Determination of bisphenol A: Old problem, recent creative solutions based on novel materials

Bisphenol A is a synthetic compound widely used in industry, in the production of polycarbonate, epoxy resins, and thermal paper, among others. Its annual production is estimated at millions of tons per year, demonstrating its importance. Despite its wide application in various everyday products, once in the environment (due to its disposal or leaching), it has high toxicity to humans and animal life, and this problem has been well known for years. Given this problem, many researchers seek alternatives for its monitoring in matrices such as natural water, waste, food, and biological matrices. For this, new advanced materials have been developed, characterized, and applied in creative ways for the preparation of samples for the determination of bisphenol A. This article aims to present some of these important and recent applications, describing the use of molecularly imprinted polymers, metal and covalent organic frameworks, ionic liquids and magnetic ionic liquids, and deep eutectic solvents as creative solutions in sample preparation for the long-standing problem of bisphenol A determination.

Poly(ionic liquid)s as new adsorbents in dispersive micro-solid-phase extraction of unmodified and modified oligonucleotides

Cross-linked poly(ionic liquid)s were successfully used for the first time in the preparation of oligonucleotide biological samples. The adsorbents were prepared by co-polymerization of imidazolium-based ionic liquids and divinylbenzene. Consequently, the following three adsorbents were prepared and comprehenzively characterized: poly(3-butyl-1-vinylimidazolium bromide-co-divinylbenzene), poly(3-hexyl-1-vinylimidazolium bromide-co-divinylbenzene) and poly(2-(1-vinylimidazoliumyl)acetate-co-divinylbenzene). Oligonucleotides were adsorbed onto the surface of these materials at low pH values. Preliminary studies of the desorption of the analytes included testing the influence of different types of salts, as well as their concentrations and pH, and organic solvents on the recovery. This allowed for determining the adsorbent and the desorption conditions for further optimization with the use of central composition design. The chosen adsorbent was poly(2-(1-vinylimidazoliumyl)acetate-co-divinylbenzene), and the optimal desorption conditions (5 mM ammonium acetate (pH = 9.5)/methanol (50/50, v/v)) gave a recovery of 99.7 ± 0.3%. The dispersive micro-solid-phase extraction procedure was successfully applied for the extraction of oligonucleotides with various modifications and lengths. Finally, the developed method was used to extract 2'-O-methyl oligonucleotide and its two synthetic metabolites from enriched human plasma without any pre-purification, yielding recoveries over 80%.

Thin Porous Poly(ionic liquid) Coatings for Enhanced Headspace Solid Phase Microextraction

In this contribution, thin poly(ionic liquid) (PIL) coatings with a well-defined pore structure built up from interpolyelectrolyte complexation between a PIL and poly(acrylic acid) (PAA) were successfully used for enhanced solid phase microextraction (SPME). The introduction of porosity with tunable polarity through the highly versatile PIL chemistry clearly boosts the potential of SPME in the detection of compounds at rather low concentrations. This work will inspire researchers to further explore the potential of porous poly(ionic liquid) materials in sensing and separation applications.

The Influence of Ionic Liquids on the Effectiveness of Analytical Methods Used in the Monitoring of Human and Veterinary Pharmaceuticals in Biological and Environmental Samples-Trends and Perspectives

Recent years have seen the increased utilization of ionic liquids (ILs) in the development and optimization of analytical methods. Their unique and eco-friendly properties and the ability to modify their structure allows them to be useful both at the sample preparation stage and at the separation stage of the analytes. The use of ILs for the analysis of pharmaceuticals seems particularly interesting because of their systematic delivery to the environment. Nowadays, they are commonly detected in many countries at very low concentration levels. However, due to their specific physiological activity, pharmaceuticals are responsible for bioaccumulation and toxic effects in aquatic and terrestrial ecosystems as well as possibly upsetting the body's equilibrium, leading to the dangerous phenomenon of drug resistance. This review will provide a comprehensive summary of the use of ILs in various sample preparation procedures and separation methods for the determination of pharmaceuticals in environmental and biological matrices based on liquid-based chromatography (LC, SFC, TLC), gas chromatography (GC) and electromigration techniques (e.g., capillary electrophoresis (CE)). Moreover, the advantages and disadvantages of ILs, which can appear during extraction and separation, will be presented and attention will be given to the criteria to be followed during the selection of ILs for specific applications.