Precision Polymer Synthesis by Controlled Radical Polymerization: Fusing the progress from Polymer Chemistry and Reaction Engineering

Design and Development of Infiltration Resins: From Base Monomer Structure to Resin Properties

The resin infiltration concept is one of the most widely used minimally invasive restorative techniques in restorative dentistry with the most outstanding therapeutic effect, and it is also one of the key research directions in restorative dentistry. "Infiltration resin" is the specialty restorative material for the technology, which is the key factor to success. The specialized restorative material is commonly known as "infiltrant/infiltration resins" "resins infiltrant" "infiltrant" or "resins," which will be consistently referred to as "infiltration resins" throughout the article. The paper aims to provide a comprehensive overview of infiltration resins by introducing the development of their therapeutic mechanisms, basic components, current challenges, and future trends, Based on existing literature, we analyze and compare how changes in the base monomer's structure and ratio affect the effectiveness of infiltration resins, from the material's structure-effective relationship. After compiling the information, the existing solution strategies have been listed to offer substantial support and guidance for future research endeavors.

Valorization of Lactate Esters and Amides into Value-Added Biobased (Meth)acrylic Polymers

(Meth)acrylic polymers are massively produced due to their inherently attractive properties. However, the vast majority of these polymers are derived from fossil resources, which is not aligned with the tendency to reduce gas emissions. In this context, (meth)acrylic polymers derived from biomass (biobased polymers) are gaining momentum, as their application in different areas can not only stand the comparison but even surpass, in some cases, the performance of petroleum-derived ones. In this review, we highlight the design and synthesis of (meth)acrylic polymers derived from lactate esters (LEs) and lactate amides (LAs), both derived from lactic acid. While biobased polymers have been widely studied and reviewed, the poly(meth)acrylates with pendant LE and LA moieties evolved slowly until recently when significant achievements have been made. Hence, constraints and opportunities arising from previous research in this area are presented, focusing on the synthesis of well-defined polymers for the preparation of advanced materials.

Synthesis of Polyacrylamide Nanomicrospheres Modified with a Reactive Carbamate Surfactant for Efficient Profile Control and Blocking

Urethane surfactants (REQ) were synthesized with octadecanol ethoxylate (AEO) and isocyanate methacrylate (IEM). Subsequently, reactive-carbamate-surfactant-modified nanomicrospheres (PER) were prepared via two-phase aqueous dispersion polymerization using acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and ethylene glycol dimethacrylate (EGDMA). The microstructures and properties of the nanomicrospheres were characterized and examined via infrared spectroscopy, nano-laser particle size analysis, scanning electron microscopy, and in-house simulated exfoliation experiments. The results showed that the synthesized PER nanomicrospheres had a uniform particle size distribution, with an average size of 336 nm. The thermal decomposition temperature of the nanomicrospheres was 278 °C, and the nanomicrospheres had good thermal stability. At the same time, the nanomicrospheres maintained good swelling properties at mineralization < 10,000 mg/L and temperature < 90 °C. Under the condition of certain permeability, the blocking rate and drag coefficient gradually increased with increasing polymer microsphere concentration. Furthermore, at certain polymer microsphere concentrations, the blocking rate and drag coefficient gradually decreased with increasing core permeability. The experimental results indicate that nanomicrospheres used in the artificial core simulation drive have a better ability to drive oil recovery. Compared with AM microspheres (without REQ modification), nanomicrospheres exert a more considerable effect on recovery improvement. Compared with the water drive stage, the final recovery rate after the drive increases by 23.53%. This improvement is attributed to the unique structural design of the nanorods, which can form a thin film at the oil-water-rock interface and promote oil emulsification and stripping. In conclusion, PER nanomicrospheres can effectively control the fluid dynamics within the reservoir, reduce the loss of oil and gas resources, and improve the economic benefits of oil and gas fields, giving them a good application prospect.

Precise Regulation in Chain-Edge Structural Microenvironments of 1D Covalent Organic Frameworks for Photocatalysis

Covalent organic frameworks (COFs) constitute a promising research topic for photocatalytic reactions, but the rules and conformational relationships of 1D COFs are poorly defined. Herein, the chain edge structure is designed by precise modulation at the atomic level, and the 1D COFs bonded by C, O, and S elements is directionally prepared for oxygen-tolerant photoinduced electron transfer-atom transfer radical polymerization (PET-ATRP) reactions. It is demonstrated that heteroatom-type chain edge structures (─O─, ─S─) lead to a decrease in intra-plane conjugation, which restricts the effective transport of photogenerated electrons along the direction of the 1D strip. In contrast, the all-carbon type chain edge structure (─C─) with higher intra-plane conjugation not only reduces the energy loss of photoexcited electrons but also enhances the carrier density, which exhibits the optimal photopolymerization performance. This work offers valuable guidance in the exploitation of 1D COFs for high photocatalytic performance. This work offers valuable guidance in the exploitation of 1D COFs for high photocatalytic performance.

Transformation of metoprolol in UV/PDS process: Role and mechanisms of degradation and polymerization

Advanced oxidation processes for the treatment of organic pollutants in wastewater suffer from difficulties in mineralization, potential risks of dissolved residues, and high oxidant consumption. In this study, radical-initiated polymerization is dominated in an UV/peroxydisulfate (PDS) process to eliminate organic pollutant of pharmaceutical metoprolol (MTP). Compared with an ideal degradation-based UV/PDS process, the present process can save four fifths of PDS consumption at the same dissolved organic carbon removal of 47.3%. Simultaneously, organic carbon can be recovered from aqueous solution by separating solid polymers at a ratio of 50% of the initial chemical oxygen demand. The chemical structure of products was analyzed to infer the transformation pathways of MTP. Unlike previous studies on simple organic pollutants that the polymerization can occur independently, the polymerization of MTP is dependent on the partial degradation of MTP, and the main monomer in polymerization is a dominant degradation product (4-(2-methoxyethyl)-phenol, denoted as DP151). The separated solid polymers are formed by repeated oxidation and coupling of DP151 or its derivatives through a series of intermediate oligomers. This proof-of-concept study demonstrates the advantage of polymerization-dominated mechanism on dealing with large organic molecules with complex structures, as well as the potential of UV/PDS process for simultaneous organic pollution reduction and organic carbon recovery from aqueous solution.

Continuous Flow Synthesis of Functional Isocyanate-Free Poly(oxazolidone)s by Step-Growth Polymerization

Flow chemistry presents many advantages over batch processes for the fast and continuous production of polymers under more robust, safer, and easily scalable conditions. Although largely exploited for chain-growth polymerizations, it has rarely been applied to step-growth polymerizations (SGP) due to their inherent limitations. Here, we report the facile and fast preparation of an emerging class of nonisocyanate polyurethanes, i.e., CO2-based poly(oxazolidone)s, by SGP in continuous flow reactors. Importantly, we also demonstrate that functional poly(oxazolidone)s are easily prepared by telescoping a flow module where SGP occurs with reagents able to simultaneously promote two polymer derivatizations in a second module, i.e., dehydration followed by cationic thiol-ene to yield poly(N,S-acetal oxazolidone)s. The functional polymer is produced at a high rate and functionalization degree, without requiring the isolation of any intermediates. This work demonstrates the enormous potential of flow technology for the facile and fast continuous production of functional polymers by SGP.

Dynamic-Bond-Mediated Chain Reptation Enhances Energy Dissipation of Elastomers

Vibrations with various frequencies in daily life and industry can cause health hazards and fatigue failure of critical structures, which requires the development of elastomers with high energy dissipation at desired frequencies. Current strategies relying on tuning characteristic relaxation time of polymer chains are mostly qualitative empirical methods, and it is difficult to precisely control damping performances. Here, we report a general strategy for constructing dynamic crosslinked polymer fluid gels that provide controllable ultrahigh energy dissipation. This is realized by dynamic-bond-mediated chain reptation of polymer fluids in a crosslinked network, where the characteristic time of chain reptation is dominated by the presence of well-defined dissociation time of dynamic bonds and almost independent of their molar mass. Using prototypical supramolecular polydimethylsiloxane elastomers, we demonstrate that dynamic crosslinked polymer fluid gels exhibit a controllable ultrahigh damping performance at desired frequencies (10-2~102 Hz), exceeding that of typical state-of-the-art silicone damping materials. Their shock absorption is over 300 % higher than that of commercial silicone rubber under the same impact force.

Achieving high molecular weight alternating copolymers of 1-octene with methyl acrylate via Lewis acid catalyzed copolymerization

The radical (co)polymerization of long-chain α-olefins (C4+) to produce high molecular weight (Mw) polymers is of great importance. However, this process is currently faced with significant challenges due to the presence of less reactive allylic radicals during radical (co)polymerization, leading to oligomers or polymers with extremely low Mw (less than 1 × 104 g mol-1). Using copolymerization of 1-octene with methyl acrylate (MA) as a proof-of-concept for addressing this challenge, we present a feasible method for synthesizing high Mw α-olefin copolymers via scandium trifluoromethanesulfonate (Sc(OTf)3)-mediated radical copolymerization. In this case, copolymers of 1-octene and MA (poly(1-octene-alt-MA)) with a Mw exceeding 3 × 104 g mol-1 were successfully synthesized in the presence of Sc(OTf)3. Meanwhile, the presence of alternating 1-octene-MA sequential structures was observed. To further enhance the Mw of poly(1-octene-alt-MA), a difunctional comonomer, 1,7-octadiene, was introduced to copolymerize with 1-octene and MA. The results indicate that the incorporation of difunctional comonomer leads to a significant increase in the Mw of the copolymers synthesized. The addition of 1 mol% of 1,7-octadiene resulted in a copolymer with a remarkably high Mw of up to 13.45 × 104 g mol-1 while still maintaining a high degree of the alternating 1-octene-MA sequence (41%). The influence of polymerization parameters on the molecular weight were also investigated. Increasing the monomer concentration, reducing the dosage of initiator, and lowering the polymerization temperature have been found to be advantageous in enhancing the molecular weight. This approach has also been successfully applied to the synthesis of high molecular weight alternating copolymers of other long-chain α-olefins, including 1-hexene, 1-decene and 1-tetradecane, with methyl acrylate. In summary, this study provides a feasible method for converting "less activated" α-olefins into high Mw olefin copolymers. This approach holds significant potential for the production of value-added polyolefins, thus offering promising prospects for future applications.

Electrochemically Mediated Surface-Initiated Atom Transfer Radical Polymerization by ppm of CuII/Tris(2-pyridylmethyl)amine

Atom transfer radical polymerization (ATRP) is one of the most widely used methods for modifying surfaces with functional polymer films and has received considerable attention in recent years. Here, we report an electrochemically mediated surface-initiated ATRP to graft polymer brushes onto solid substrates catalyzed by ppm amounts of CuII/TPMA in water/MeOH solution. We systematically investigated the type and concentrations of copper/ligand and applied potentials correlated to the polymerization kinetics and polymer brush thickness. Gradient polymer brushes and various types of polymer brushes are prepared. Block copolymerization of 2-hydroxyethyl methacrylate (HEMA) and 3-sulfopropyl methacrylate potassium salt (PSPMA) (poly(HEMA-b-SPMA)) with ultralow ppm eATRP indicates the remarkable preservation of chain end functionality and a pronounced "living" characteristic feature of ppm-level eATRP in aqueous solution for surface polymerization.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Visible Light Photoiniferter Polymerization for Dispersity Control in High Molecular Weight Polymers

The synthesis of polymers with high molecular weights, controlled sequence, and tunable dispersities remains a challenge. A simple and effective visible-light controlled photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization is reported here to realize this goal. Key to this strategy is the use of switchable RAFT agents (SRAs) to tune polymerization activities coupled with the inherent highly living nature of photoiniferter RAFT polymerization. The polymerization activities of SRAs were in situ adjusted by the addition of acid. In addition to a switchable chain-transfer coefficient, photolysis and polymerization kinetic studies revealed that neutral and protonated SRAs showed different photolysis and polymerization rates, which is unique to photoiniferter RAFT polymerization in terms of dispersity control. This strategy features no catalyst, no exogenous radical source, temporal regulation by visible light, and tunable dispersities in the unprecedented high molecular weight regime (up to 500 kg mol-1 ). Pentablock copolymers with three different dispersity combinations were also synthesized, highlighting that the highly living nature was maintained even for blocks with large dispersities. Tg was lowered for high-dispersity polymers of similar MWs due to the existence of more low-MW polymers. This strategy holds great potential for the synthesis of advanced materials with controlled molecular weight, dispersity and sequence.

Beauty of Explicit Dispersity (Đ) Equations in Controlled Polymerizations

Dispersity (Đ) as a critical parameter indicates the level of uniformity of the polymer molar mass or chain length. In the past several decades, the development of explicit equations for calculating Đ experiences a continual revolution. This viewpoint tracks the historical evolution of the explicit equations from living to reversible-deactivation polymerization systems. Emphasis is laid on displaying the charm of explicit Đ equations in batch reversible-deactivation radical polymerization (RDRP), with highlights of the relevant elegant mathematical manipulations. Some representative emerging applications enabled by the existing explicit equations are shown, involving nitroxide-mediated polymerization (NMP), atom transfer radical polymerization (ATRP), and reversible addition-fragmentation chain transfer (RAFT) polymerization systems. Stemming from the several outlined challenges and outlooks, sustained concerns about the explicit Đ equations are still highly deserved. It is expected that these equations will continue to play an important role not only in traditional polymerization kinetic simulation and design of experiments but also in modern intelligent manufacturing of precision polymers and classroom education.

From Linear to Nets: Multiconfiguration Polymer Structure Generation with PolyFlin

Molecular modeling and simulations are essential tools in polymer science and engineering, enabling researchers to predict and understand the properties of macromolecules, including their structure, dynamics, thermodynamics, and overall material characteristics. However, one of the key challenges in polymer simulation and modeling lies in the initial topology design, as existing programs often lack the capability to generate all types of polymer forms. In this study, we present PolyFlin, a powerful Python module that addresses this limitation by allowing the generation of a wide range of polymer structures, from simple homopolymers to complex copolymers, including grafts, cyclic, star, dendrimers, and nets. PolyFlin offers a versatile and efficient tool for exploring and creating diverse polymer architectures, facilitating advancements in various fields that require precise polymer modeling and simulation.

Controlled Radical Polymerization Initiated by Solvated Electrons

Solvated electron (esol - ) is highly reducing species and apt to initiate monomers via one-electron transfer reaction. Herein, utilizing the esol - solution of Na/hexamethylphosphoramide, radical and anionic initiations are observed respectively, which heavily depend on Na concentrations. Interestingly, this initiation system, in states of lower Na concentrations, higher molar conductivities and less paired esol - , give rise to a controlled radical polymerization (CRP) to yield polymers with predictable molecular weights and narrow molecular weight distributions (the lowest Ð = 1.25). This CRP presents unique behaviors, like solvent effect, electric field effect, and unusual copolymerization phenomenon. A semi-conjugated radical carrying a negative charge is proposed to be responsible for the CRP. This system gives a distinct way to regulate CRP from current CRPs, and offers new insights into the monomer initiation by esol - .

Tribochemically Controlled Atom Transfer Radical Polymerization Enabled by Contact Electrification

Traditional mechanochemically controlled reversible-deactivation radical polymerization (RDRP) utilizes ultrasound or ball milling to regenerate activators, which induce side reactions because of the high-energy and high-frequency stimuli. Here, we propose a facile approach for tribochemically controlled atom transfer radical polymerization (tribo-ATRP) that relies on contact-electro-catalysis (CEC) between titanium oxide (TiO2 ) particles and CuBr2 /tris(2-pyridylmethylamine (TPMA), without any high-energy input. Under the friction induced by stirring, the TiO2 particles are electrified, continuously reducing CuBr2 /TPMA into CuBr/TPMA, thereby conversing alkyl halides into active radicals to start ATRP. In addition, the effect of friction on the reaction was elucidated by theoretical simulation. The results indicated that increasing the frequency could reduce the energy barrier for the electron transfer from TiO2 particles to CuBr2 /TPMA. In this study, the design of tribo-ATRP was successfully achieved, enabling CEC (ca. 10 Hz) access to a variety of polymers with predetermined molecular weights, low dispersity, and high chain-end fidelity.

Recent Advances in the Application of ATRP in the Synthesis of Drug Delivery Systems

Advances in atom transfer radical polymerization (ATRP) have enabled the precise design and preparation of nanostructured polymeric materials for a variety of biomedical applications. This paper briefly summarizes recent developments in the synthesis of bio-therapeutics for drug delivery based on linear and branched block copolymers and bioconjugates using ATRP, which have been tested in drug delivery systems (DDSs) over the past decade. An important trend is the rapid development of a number of smart DDSs that can release bioactive materials in response to certain external stimuli, either physical (e.g., light, ultrasound, or temperature) or chemical factors (e.g., changes in pH values and/or environmental redox potential). The use of ATRPs in the synthesis of polymeric bioconjugates containing drugs, proteins, and nucleic acids, as well as systems applied in combination therapies, has also received considerable attention.

Development and Experimental Validation of a Dispersity Model for In Silico RAFT Polymerization

The exploitation of computational techniques to predict the outcome of chemical reactions is becoming commonplace, enabling a reduction in the number of physical experiments required to optimize a reaction. Here, we adapt and combine models for polymerization kinetics and molar mass dispersity as a function of conversion for reversible addition fragmentation chain transfer (RAFT) solution polymerization, including the introduction of a novel expression accounting for termination. A flow reactor operating under isothermal conditions was used to experimentally validate the models for the RAFT polymerization of dimethyl acrylamide with an additional term to accommodate the effect of residence time distribution. Further validation is conducted in a batch reactor, where a previously recorded in situ temperature monitoring provides the ability to model the system under more representative batch conditions, accounting for slow heat transfer and the observed exotherm. The model also shows agreement with several literature examples of the RAFT polymerization of acrylamide and acrylate monomers in batch reactors. In principle, the model not only provides a tool for polymer chemists to estimate ideal conditions for a polymerization, but it can also automatically define the initial parameter space for exploration by computationally controlled reactor platforms provided a reliable estimation of rate constants is available. The model is compiled into an easily accessible application to enable simulation of RAFT polymerization of several monomers.

Ring Repeating Unit: An Upgraded Structure Representation of Linear Condensation Polymers for Property Prediction

Unique structure representation of polymers plays a crucial role in developing models for polymer property prediction and polymer design by data-centric approaches. Currently, monomer and repeating unit (RU) approximations are widely used to represent polymer structures for generating feature descriptors in the modeling of quantitative structure-property relationships (QSPR). However, such conventional structure representations may not uniquely approximate heterochain polymers due to the diversity of monomer combinations and the potential multi-RUs. In this study, the so-called ring repeating unit (RRU) method that can uniquely represent polymers with a broad range of structure diversity is proposed for the first time. As a proof of concept, an RRU-based QSPR model was developed to predict the associated glass transition temperature (T_g) of polyimides (PIs) with deterministic values. Comprehensive model validations including external, internal, and Y-random validations were performed. Also, an RU-based QSPR model developed based on the same large database of 1321 PIs provides nonunique prediction results, which further prove the necessity of RRU-based structure representation. Promising results obtained by the application of the RRU-based model confirm that the as-developed RRU method provides an effective representation that accurately captures the sequence of repeat units and thus realizes reliable polymer property prediction by data-driven approaches.

Radiation Processing of Styrene-isoprene-styrene/Poly(ε-caprolactone) Blends

The irradiation consequences on styrene-isoprene-styrene (SIS)/poly(ε-caprolactone) (PCL) blends are discussed starting from the oxidation initiation. Three characterization methods: chemiluminescence, differential scanning calorimetry and FTIR spectroscopy are applied. The differences that exist between the two components are revealed, when the oxidation rates of the inspected formulas depend on the blending proportion and the degradation conditions. The relevant activation energies characterizing the oxidation strength as well as the kinetic parameters of degradation during the accelerated damaging of blended polymers are related to the inhibition protection of PCL on the faster oxidation of SIS. The interaction between mixed components is revealed by the structural modifications simultaneously accompanied by the competition of formation and decay of radicals.

Alternating Methyl Methacrylate/n-Butyl Acrylate Copolymer Prepared by Atom Transfer Radical Polymerization

Poly(methyl methacrylate/n-butyl acrylate) [P(MMA/BA)] copolymer with an alternating structure was synthesized via an activator regenerated by electron transfer (ARGET) atom transfer radical (co)polymerization (ATRP) of 2-ethylfenchyl methacrylate (EFMA) and n-butyl acrylate (BA) with subsequent postpolymerization modifications (PPM). Due to the steric hindrance of the bulky pendant group of EFMA, as well as the low reactivity ratio of BA in copolymerization with methacrylates, copolymerization of EFMA and BA generated a copolymer with a high content of alternating dyads. A subsequent PPM procedure of the alternating EFMA/BA copolymer was comprised of the hydrolysis of a tertiary ester by trifluoroacetic acid and methylation by (trimethylsilyl)diazomethane. After the modifications, the architecture of the obtained alternating MMA/BA copolymers was compared with gradient and statistical copolymers with overall similar compositions, molecular weights, and dispersities. ¹³C NMR indicated the absence of either MMA/MMA/MMA or BA/BA/BA sequences, in contrast to an abundance of homotriads in either the statistical or especially in the gradient copolymer. All three copolymers had similar glass transition temperatures, as measured by differential scanning calorimetry (DSC), but the alternating copolymer had the narrowest range of glass transition.

Controllable synthesis and structural design of novel all-organic polymers toward high energy storage dielectrics

As the core unit of energy storage equipment, high voltage pulse capacitor plays an indispensable role in the field of electric power system and electromagnetic energy related equipment. The mostly utilized polymer materials are metallized polymer thin films, which are represented by biaxially oriented polypropylene (BOPP) films, possessing the advantages including low cost, high breakdown strength, excellent processing ability, and self-healing performance. However, the low dielectric constant (εr &lt; 3) of traditional BOPP films makes it impossible to meet the demand for increased high energy density. Controlled/living radical polymerization (CRP) and related techniques have become a powerful approach to tailor the chemical and physical properties of materials and have given rise to great advances in tuning the properties of polymer dielectrics. Although organic-inorganic composite dielectrics have received much attention in previous studies, all-organic polymer dielectrics have been proven to be the most promising choice because of its light weight and easy large-scale continuous processing. In this short review, we begin with some basic theory of polymer dielectrics and some theoretical considerations for the rational design of dielectric polymers with high performance. In the guidance of these theoretical considerations, we review recent progress toward all-organic polymer dielectrics based on two major approaches, one is to control the polymer chain structure, containing microscopic main-chain and side-chain structures, by the method of CRP and the other is macroscopic structure design of all-organic polymer dielectric films. And various chemistry and compositions are discussed within each approach.

Sonochemistry-assisted photocontrolled atom transfer radical polymerization enabled by manganese carbonyl

Sonochemistry-assisted photocontrolled atom transfer radical polymerization (SAP-ATRP) is developed to circumvent the problem caused by the low penetration depth of light.