Evaluation of the durability and antiadhesive action of 2-methacryloyloxyethyl phosphorylcholine grafting on an acrylic resin denture base material

Cryptocarya moschata extract decreases single and mixed biofilms on acrylic resins

OBJECTIVE

This study proposed to assess the effect of Cryptocarya moschata extract on single and mixed biofilms formed on denture base and reline acrylic resin.

MATERIALS AND METHODS

Single and mixed biofilms of Candida albicans and Streptococcus mutans were formed on the samples and treated with C. moschata extract; Nystatin solution at 100,000 IU/mL or Penicillin antibiotic solution at 100,000 IU/mL; or PBS solution. Antimicrobial activity was analyzed by counting colony-forming units, metabolism assay, assessment of protein components of the biofilm matrix, and of cell viability using confocal laser scanning microscopy (CLSM). Data were submitted to ANOVA and Tukey's post-test (α = 0.05).

RESULTS

Cryptocarya moschata extract reduced cell viability of C. albicans and S. mutans single and mixed biofilms formed on samples. For all types of biofilms in the C. moschata group, there was a log reduction of the biofilm, proven by the Alamar Blue assay. Analyzing the extracellular matrix protein components, groups treated with the extract exhibited a lower level of fluorescence compared to the PBS groups. Reduction in thickness biofilm and viable cells was perceptible in the C. moschata group when assessing through CLSM.

CONCLUSION

Cryptocarya moschata extract reduced the single and mixed biofilms of C. albicans and S. mutans on acrylic resins.

2-methacryloyloxyethyl phosphorylcholine polymer treatment prevents Candida albicans biofilm formation on acrylic resin

PURPOSE

We aimed to evaluate the effectiveness of photoreactive 2-methacryloyloxyethyl phosphorylcholine (MPC) in inhibiting Candida albicans biofilm formation on polymethyl methacrylate (PMMA) and assess its mechanism and need for re-application by evaluating its interaction with salivary mucin and durability during temperature changes.

METHODS

PMMA discs were used as specimens. The MPC coating was applied using the spray and cure technique for the treatment groups, whereas no coating was applied to the control. The MPC treatment (MT) groups were further differentiated based on the number of thermal cycles involved (0, 1000, 2500, and 5000). The optical density was measured to assess mucin adsorption (MA). Contact angle (CA) was calculated to evaluate surface hydrophilicity. The presence of MPC components on the PMMA surface was assessed using X-ray photoelectron spectroscopy (XPS). C. albicans biofilms were evaluated qualitatively (scanning electron microscope images) and quantitatively (colony-forming units (CFUs)). Statistical analysis was conducted using two-way analysis of variance and Tukey's multiple comparison test.

RESULTS

MA rate and CA increased significantly in the MT groups, which exhibited significantly fewer CFUs and thinner biofilms than those of the control group. Based on the XPS, MA, and CFU evaluations, the durability and efficacy of the MPC coating were considered stable up to 2500 thermal cycles. Additionally, a significant interaction was observed between mucin concentration and MPC efficacy.

CONCLUSIONS

The photoreactive MPC coating, which was resistant to temperature changes for approximately 3 months, effectively prevented C. albicans biofilm formation by modifying surface hydrophilicity and increasing mucin adsorption.

Novel protein-repellent and antibacterial polymethyl methacrylate dental resin in water-aging for 6 months

Background

The present study aimed to develop a novel protein-repellent and antibacterial polymethyl methacrylate (PMMA) dental resin with 2-methacryloyloxyethyl phosphorylcholine (MPC) and quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM), and to investigate the effects of water-aging for 6 months on the mechanical properties, protein adsorption, and antibacterial activity of the dental resin.

Methods

Four groups were tested: PMMA control; PMMA + 3% MPC; PMMA + 1.5% DMAHDM; and PMMA + 3% MPC + 1.5% DMADDM in acrylic resin powder. Specimens were water-aged for 1 d, 3 months, and 6 months at 37 ℃. Their mechanical properties were then measured using a three-point flexure test. Protein adsorption was measured using a micro bicinchoninic acid (BCA) method. A human saliva microcosm model was used to inoculate bacteria on water-aged specimens and to investigate the live/dead staining, metabolic activity of biofilms, and colony-forming units (CFUs).

Results

The flexural strength and elastic modulus showed a significant loss after 6 months of water-ageing for the PMMA control (mean ± SD; n = 10); in contrast, the new protein repellent and antibacterial PMMA resin showed no strength loss. The PMMA–MPC–DMAHDM-containing resin imparted a strong antibacterial effect by greatly reducing biofilm viability and metabolic activity. The biofilm CFU count was reduced by about two orders of magnitude (p < 0.05) compared with that of the PMMA resin control. The protein adsorption was 20% that of a commercial composite (p < 0.05). Furthermore, the PMMA–MPC–DMAHDM-containing resin exhibited a long-term antibacterial performance, with no significant difference between 1 d, 3 months and 6 months (p > 0.05).

Conclusions

The flexural strength and elastic modulus of the PMMA–MPC–DMAHDM-containing resin were superior to those of the PMMA control after 6 months of water-ageing. The novel PMMA resin incorporating MPC and DMAHDM exhibited potent and lasting protein-repellent and antibacterial properties.

Enhanced antimicrobial and remineralizing properties of self-adhesive orthodontic resin containing mesoporous bioactive glass and zwitterionic material

Abstract Background/purpose

Self-adhesive resins (SARs) do not require additional restorative adhesives and provide adequate adhesion to mineralized dental structures by shortening the bonding time in clinics where moisture control and isolation are difficult. The aim of this study was to evaluate the mechanical and biological properties of SARs containing mesoporous bioactive glass nanoparticles (MBNs) and 2-methacryloyloxyethyl phosphorylcholine (MPC) and to determine their antibacterial and remineralization effects.

Materials and methods

MBNs and MPC were added to SARs to improve their physical properties and remineralization ability. The experimental resins assessed in this study were SARs mixed with 3%MPC, 5%MPC, 1%MBN+3%MPC, or 3%MBN+3%MPC. The shear bond strength, microhardness, adhesive remnant index, ion dissolution, degree of conversion, and antibacterial properties of the SARs were evaluated. To assess the remineralization properties, micro-computed tomography analysis was performed after pH cycling.

Results

Increasing the MBN content in SAR resulted in higher microhardness compared to the control SAR. The shear bond strength decreased in the SAR+5%MPC group and increased in the SAR+1%MBN+3%MPC and SAR+3%MBN+5%MPC groups.

Conclusion

Our findings suggest that SARs containing MBNs and MPC have antibacterial and remineralization effects on the enamel.

Surface Modification to Modulate Microbial Biofilms-Applications in Dental Medicine

Recent progress in materials science and nanotechnology has led to the development of advanced materials with multifunctional properties. Dental medicine has benefited from the design of such materials and coatings in providing patients with tailored implants and improved materials for restorative and functional use. Such materials and coatings allow for better acceptance by the host body, promote successful implantation and determine a reduced inflammatory response after contact with the materials. Since numerous dental pathologies are influenced by the presence and activity of some pathogenic microorganisms, novel materials are needed to overcome this challenge as well. This paper aimed to reveal and discuss the most recent and innovative progress made in the field of materials surface modification in terms of microbial attachment inhibition and biofilm formation, with a direct impact on dental medicine.

In Vitro Biofilm Formation on Aryl Ketone Polymer (AKP), A New Denture Material, Compared with That on Three Traditional Dental Denture Materials

Control of denture plaque biofilms is a practical approach to preventing persistent oral infections such as denture stomatitis. Objectives. This study compared in vitro biofilm attachment and growth on a new denture material, Ultaire® AKP, with that on traditional denture materials including cobalt chrome (CoCr), polymethyl methacrylate (PMMA), and polyoxymethylene (POM). Methods. Microbial biofilms were grown with cultures of Candida albicans, Streptococcus mutans UA159, or a mixed Streptococcus spp. (S. mutans 700610/Streptococcus sanguinis BAA-1455) for 6 hours in a static protocol or 24 hours in a dynamic protocol for each material. Adherent biofilm cells were removed, and viable colony-forming units (CFUs) were enumerated. Confocal microscopy of the 24-hour Streptococcus spp. biofilms was used to determine biofilm mass and roughness coefficients. Results. The rank order of C. albicans attachment after 6 hours was CoCr > PMMA ^∗  > Ultaire® AKP ^∗ ( ^∗ vs CoCr, p ≤ 0.05), and that for 24-hour biofilm growth was CoCr > Ultaire® AKP ^∗  > PMMA ^∗ ( ^∗ vs CoCr, p ≤ 0.05). The rank order of S. mutans biofilm attachment was CoCr > POM > Ultaire® AKP ^∗  > PMMA ^∗ ( ^∗ vs CoCr, p ≤ 0.05), and that for the 24-hour Streptococcus spp. biofilm growth was POM > Ultaire® AKP > PMMA > CoCr ^∗ ( ^∗ vs POM, p ≤ 0.05). Confocal images revealed structural differences in Streptococcus spp. biofilms on CoCr compared with the other test materials. Significantly lower roughness coefficients of Streptococcus spp. biofilms on Ultaire® AKP were noted, suggesting that these biofilms were less differentiated. Ultaire® AKP promoted significantly less C. albicans and S. mutans biofilm attachment than CoCr at 6 hours and C. albicans growth at 24 hours. Streptococcus spp. biofilms on Ultaire® AKP were less differentiated than those on other test materials. Conclusion. In addition to its material strength, Ultaire® AKP represents an attractive option for denture material in removable partial dentures.

Challenges and strategies for in situ endothelialization and long-term lumen patency of vascular grafts

Vascular diseases are the most prevalent cause of ischemic necrosis of tissue and organ, which even result in dysfunction and death. Vascular regeneration or artificial vascular graft, as the conventional treatment modality, has received keen attentions. However, small-diameter (diameter < 4 mm) vascular grafts have a high risk of thrombosis and intimal hyperplasia (IH), which makes long-term lumen patency challengeable. Endothelial cells (ECs) form the inner endothelium layer, and are crucial for anti-coagulation and thrombogenesis. Thus, promoting in situ endothelialization in vascular graft remodeling takes top priority, which requires recruitment of endothelia progenitor cells (EPCs), migration, adhesion, proliferation and activation of EPCs and ECs. Chemotaxis aimed at ligands on EPC surface can be utilized for EPC homing, while nanofibrous structure, biocompatible surface and cell-capturing molecules on graft surface can be applied for cell adhesion. Moreover, cell orientation can be regulated by topography of scaffold, and cell bioactivity can be modulated by growth factors and therapeutic genes. Additionally, surface modification can also reduce thrombogenesis, and some drug release can inhibit IH. Considering the influence of macrophages on ECs and smooth muscle cells (SMCs), scaffolds loaded with drugs that can promote M2 polarization are alternative strategies. In conclusion, the advanced strategies for enhanced long-term lumen patency of vascular grafts are summarized in this review. Strategies for recruitment of EPCs, adhesion, proliferation and activation of EPCs and ECs, anti-thrombogenesis, anti-IH, and immunomodulation are discussed. Ideal vascular grafts with appropriate surface modification, loading and fabrication strategies are required in further studies.

Microbicidal effect of 405-nm blue LED light on Candida albicans and Streptococcus mutans dual-species biofilms on denture base resin

This study investigated: (1) the microbicidal effect of 405-nm blue LED light irradiation on biofilm formed by Candida albicans hyphae and Streptococcus mutans under dual-species condition on denture base resin, (2) the generation of intracellular reactive oxygen species (ROS) induced by irradiation, and (3) the existence of intracellular porphyrins, which act as a photosensitizer. Denture base resin specimens were prepared and C. albicans and S. mutans dual-species biofilms were allowed to form on the specimens. The biofilms were irradiated with 405-nm blue LED light and analyzed using the colony-forming unit assay, fluorescence microscopy, and scanning electron microscopy (SEM). Single-species biofilms of C. albicans and S. mutans formed on the specimens were irradiated with 405-nm blue LED light. After the irradiation, the intracellular ROS levels in C. albicans and S. mutans cells were measured. In addition, the level of intracellular porphyrins in C. albicans and S. mutans were measured. Irradiation for more than 30 min significantly inhibited the colony formation ability of C. albicans and S. mutans. Fluorescence microscopy revealed that almost all C. albicans and S. mutans cells were killed by irradiation. SEM images showed various cell damage patterns. Irradiation led to the generation of intracellular ROS and porphyrins were present in both C. albicans and S. mutans cells. In conclusion, irradiation with 405-nm blue light-emitting diode light for 40 min effectively disinfect C. albicans hyphae and S. mutans dual-species biofilms and possibly react with intracellular porphyrins resulting in generation of ROS in each microorganism.

The long observation in vitro of prevention effect of novel self-etching orthodontic adhesive modified with 2-methacryloxyethyl phosphorylcholine in enamel demineralization

The enamel demineralization is common in fixed orthodontics. Plaque accumulation around the bracket plays a critical role and could cause various degrees of white spot lesions (WSLs) on the surface of teeth. The 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer is a biological polymer with protein repellent and an anti-bacterial adhesion effects. In this study, the enamel shear bond strength (SBS) and protein repellent property in vitro of self-etching orthodontic adhesive with MPC were evaluated. It was found that the self-etching adhesive with 0-7.5%MPC met the orthodontic clinical requirement on the SBS values at three different points of time. The incorporation of 7.5%MPC significantly reduced the bacterial adhesion and total microorganism of the yield biofilm. Moreover, the MTT assay showed that the amount of plaque metabolism in 7.5%MPC was the lowest among the groups. To conclude, the novel protein repellent self-etching adhesive was able to inhibit biofilm formation efficiently and minimize enamel demineralization.

Durable Oral Biofilm Resistance of 3D-Printed Dental Base Polymers Containing Zwitterionic Materials

Poly(methyl methacralyate) (PMMA) has long been used in dentistry as a base polymer for dentures, and it is recently being used for the 3D printing of dental materials. Despite its many advantages, its susceptibility to microbial colonization remains to be overcome. In this study, the interface between 3D-printed PMMA specimens and oral salivary biofilm was studied following the addition of zwitterionic materials, 2-methacryloyloxyethyl phosphorylcholine (MPC) or sulfobetaine methacrylate (SB). A significant reduction in bacterial and biofilm adhesions was observed following the addition of MPC or SB, owing to their protein-repellent properties, and there were no significant differences between the two test materials. Although the mechanical properties of the tested materials were degraded, the statistical value of the reduction was minimal and all the properties fulfilled the requirements set by the International Standard, ISO 20795-2. Additionally, both the test materials maintained their resistance to biofilm when subjected to hydrothermal fatigue, with no further deterioration of the mechanical properties. Thus, novel 3D-printable PMMA incorporated with MPC or SB shows durable oral salivary biofilm resistance with maintenance of the physical and mechanical properties.

Bio-Interactive Zwitterionic Dental Biomaterials for Improving Biofilm Resistance: Characteristics and Applications

Biofilms are formed on surfaces inside the oral cavity covered by the acquired pellicle and develop into a complex, dynamic, microbial environment. Oral biofilm is a causative factor of dental and periodontal diseases. Accordingly, novel materials that can resist biofilm formation have attracted significant attention. Zwitterionic polymers (ZPs) have unique features that resist protein adhesion and prevent biofilm formation while maintaining biocompatibility. Recent literature has reflected a rapid increase in the application of ZPs as coatings and additives with promising outcomes. In this review, we briefly introduce ZPs and their mechanism of antifouling action, properties of human oral biofilms, and present trends in anti-biofouling, zwitterionic, dental materials. Furthermore, we highlight the existing challenges in the standardization of biofilm research and the future of antifouling, zwitterated, dental materials.

Synergetic Effect of 2-Methacryloyloxyethyl Phosphorylcholine and Mesoporous Bioactive Glass Nanoparticles on Antibacterial and Anti-Demineralisation Properties in Orthodontic Bonding Agents

2-methacryloyloxyethyl phosphorylcholine (MPC) is known to have antibacterial and protein-repellent effects, whereas mesoporous bioactive glass nanoparticles (MBN) are known to have remineralisation effects. We evaluated the antibacterial and remineralisation effects of mixing MPC and MBN at various ratios with orthodontic bonding agents. MPC and MBN were mixed in the following weight percentages in CharmFil-Flow (CF): CF, 3% MPC, 5% MPC, 3% MPC + 3% MBN, and 3% MPC + 5% MBN. As the content of MPC and MBN increased, the mechanical properties of the resin decreased. At 5% MPC, the mechanical properties decreased significantly with respect to CF (shear bond strength), gelation of MPC occurred, and no significant difference was observed in terms of protein adsorption compared to the control group. Composition 3% MPC + 5% MBN exhibited the lowest protein adsorption because the proportion of hydrophobic resin composite decreased; CF (91.8 ± 4.8 μg/mL), 3% MPC (73.9 ± 2.6 μg/mL), 3% MPC + 3% MBN (69.4 ± 3.6 μg/mL), and 3% MPC + 5% MBN (55.9 ± 1.6 μg/mL). In experiments against S. mutans and E. coli, addition of MPC and MBN resulted in significant antibacterial effects. In another experiment, the anti-demineralisation effect was improved when MPC was added, and when MBN was additionally added, it resulted in a synergetic effect. When MPC and MBN were added at an appropriate ratio to the orthodontic bonding agents, the protein-repellent, antibacterial, and anti-demineralisation effects were improved. This combination could thus be an alternative way of treating white spot lesions.

Endothelialization of cardiovascular devices

Blood-contacting surfaces of cardiovascular devices are not biocompatible for creating an endothelial layer on them. Numerous research studies have mainly sought to modify these surfaces through physical, chemical and biological means to ease early endothelial cell (EC) adhesion, migration and proliferation, and eventually to build an endothelial layer on the surfaces. The first priority for surface modification is inhibition of protein adsorption that leads to inhibition of platelet adhesion to the device surfaces, which may favor EC adhesion. Surface modification through surface texturing, if applicable, can bring some hopeful outcomes in this regard. Surface modifications through chemical and/or biological means may play a significant role in easy endothelialization of cardiovascular devices and inhibit smooth muscle cell proliferation. Cellular engineering of cells relevant to endothelialization can boost the positive outcomes obtained through surface engineering. This review briefly summarizes recent developments and research in early endothelialization of cardiovascular devices. STATEMENT OF SIGNIFICANCE: Endothelialization of cardiovascular implants, including heart valves, vascular stents and vascular grafts is crucial to solve many problems in our health care system. Numerous research efforts have been made to improve endothelialization on the surfaces of cardiovascular implants, mainly through surface modifications in three ways - physically, chemically and biologically. This review is intended to highlight comprehensive research studies to date on surface modifications aiming for early endothelialization on the blood-contacting surfaces of cardiovascular implants. It also discusses future perspectives to help guide endothelialization strategies and inspire further innovations.

Novel Protein-Repellent and Antibacterial Resins and Cements to Inhibit Lesions and Protect Teeth

Orthodontic treatment is increasingly popular as people worldwide seek esthetics and better quality of life. In orthodontic treatment, complex appliances and retainers are placed in the patients’ mouths for at least one year, which often lead to biofilm plaque accumulation. This in turn increases the caries-inducing bacteria, decreases the pH of the retained plaque on an enamel surface, and causes white spot lesions (WSLs) in enamel. This article reviews the cutting-edge research on a new class of bioactive and therapeutic dental resins, cements, and adhesives that can inhibit biofilms and protect tooth structures. The novel approaches include the use of protein-repellent and anticaries polymeric dental cements containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); multifunctional resins that can inhibit enamel demineralization; protein-repellent and self-etching adhesives to greatly reduce oral biofilm growth; and novel polymethyl methacrylate resins to suppress oral biofilms and acid production. These new materials could reduce biofilm attachment, raise local biofilm pH, and facilitate the remineralization to protect the teeth. This novel class of dental resin with dual benefits of antibacterial and protein-repellent capabilities has the potential for a wide range of dental and biomedical applications to inhibit bacterial infection and protect the tissues.

In situ surface modification on dental composite resin using 2-methacryloyloxyethyl phosphorylcholine polymer for controlling plaque formation

Composite resins (CRs) are widely used as dental restorative materials for caries treatment. They cause problems of secondary caries since Streptococcus mutans stays in the dental plaque, which the surface exists and produces acidic compounds during metabolism. The dental plaque depositions are induced by the protein adsorption on the surface. Therefore, suppression of protein adsorption on the surface of the CRs is important for inhibiting the formation of plaque and secondary caries. In this study we developed a surface treatment to provide an antibiofouling nature to the CRs by chemical reaction with 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers in the oral cavity during dental treatment. To carry out the photochemical reaction on the remaining polymerizable groups of CRs, we synthesized the MPC polymer with a polymerizable group in the side chain. The MPC polymer could bind on the surfaces of the CRs chemically under dental treatment procedures. The treated surface showed significant resistance to oral protein adsorption and bacterial adhesion even when the surface was brushed with a toothbrush. Thus, we concluded that the photochemical reaction of the MPC polymer with the CRs in the oral cavity was good for making an antibiofouling surface and preventing secondary caries.

Protein-repellent nanocomposite with rechargeable calcium and phosphate for long-term ion release

OBJECTIVE

There has been no report on the effect of incorporating protein repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) into a composite containing nanoparticles of amorphous calcium phosphate (NACP) on calcium (Ca) and phosphate (P) ion rechargeability. The objectives of this study were to develop a Ca and P ion-rechargeable and protein-repellent composite for the first time, and investigate the effects of MPC and NACP on mechanical properties, protein-repellency, anti-biofilm effects, and Ca and P ion recharge and re-release.

METHODS

NACP were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Three NACP composites were made with 0 (control), 1.5%, and 3% of MPC. NACP (20%) and glass particles (50%) were also added into the resin. Protein adsorption was measured using a micro-bicinchoninic acid (BCA) method. A human saliva microcosm biofilm model was used to determine biofilm metabolic activity, lactic acid, and colony-forming units (CFU). Ca and P ion recharge and re-release were measured using a spectrophotometric method.

RESULTS

Flexural strengths and moduli of CaP-rechargeable composites matched those of a commercial composite without CaP rechargeability (p>0.1). Adding 1.5% and 3% MPC reduced protein adsorption to 1/3 and 1/5, respectively, that of commercial composite (p<0.05). Adding 3% MPC suppressed biofilm metabolic activity and lactic acid production, and reduced biofilm CFU by nearly 2 logs. All three NACP composites had excellent ion rechargeability and higher levels of ion re-releases. One recharge yielded continuous ion release for 21 days. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release. Incorporation of MPC did not compromise the CaP ion rechargeability.

SIGNIFICANCE

Incorporating 3% MPC into NACP nanocomposite greatly reduced protein adsorption, biofilm growth and lactic acid, decreasing biofilm CFU by nearly 2 logs, without compromising Ca and P recharge. This protein-repellent NACP-MPC rechargeable composite with long-term remineralization is promising for tooth restorations to inhibit secondary caries.

Protein-repellent and antibacterial effects of a novel polymethyl methacrylate resin

OBJECTIVES

Heat-cured resins are commonly used in orthodontics; however, there is a high incidence of caries, periodontal diseases and denture-induced stomatitis. The objectives of this study were to: (1) develop a new bioactive polymethyl methacrylate (PMMA) resin containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM), and (2) investigate the effects on mechanical properties, protein-repellency and antibacterial properties.

METHODS

MPC and DMAHDM were mixed into a commercial acrylic resin (Nature Cryl™ MC). Mechanical properties were measured in three-point flexure. Surface roughness was assessed using atomic force microscopy (AFM). Protein adsorption onto the PMMA resin was measured using a micro bicinchoninic acid (BCA) method. A human saliva microcosm model was used to investigate the live/dead staining and metabolic activity of the biofilms.

RESULTS

Incorporation of 3% MPC and 1.5% DMAHDM into PMMA resin achieved protein repellent and antibacterial capabilities, without compromising the mechanical properties. PMMA resin with 3% MPC + 1.5% DMAHDM had protein adsorption that was 1/6 that of a commercial control (p < 0.05). The PMMA resin with 3% MPC + 1.5% DMAHDM had much greater reduction in biofilm growth than using MPC or DMAHDM alone (p < 0.05).

CONCLUSIONS

A bioactive PMMA resin with a combination of strong protein-repellent and antibacterial capabilities was developed for the first time. The new resin greatly reduced the biofilm growth and metabolic activity, without compromising its mechanical properties.

SIGNIFICANCE

Novel PMMA resin is promising for applications in orthodontic retainers and orthodontic appliances to reduce biofilm activity and protein adsorption around the resin.

Examination of 2-methacryloyloxyethyl phosphorylcholine polymer coated acrylic resin denture base material: surface characteristics and Candida albicans adhesion

The aim of this study is to evaluate the effects of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coating with various concentrations onto acrylic resin denture base material on surface characteristics such as contact angle and surface roughness and on Candida albicans adhesion which is the major factor of denture stomatitis. Specimens, prepared from heat-polymerized acrylic denture base material, were divided into control and three test groups, randomly. Surfaces of the specimens in test groups were coated with poly(MPC) (PMPC) by graft polymerization of MPC in different concentrations (0.25 mol/L; 0.50 mol/L and 0.75 mol/L), while no surface treatment was applied to the control group. Contact angles and surface roughness were examined, and chemical composition of the surfaces was analyzed by Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (FTIR) to verify the presence of PMPC coatings. Then, specimens were incubated with C. albicans for 18 h and the number of adhered cells was determined. Upon PMPC coating, the contact angle values statistically decreased, but no difference was found in surface roughness values. A statistically significant decrease was observed in C. albicans adhesion in parallel with the increase in the MPC polymer concentration. There was no significant difference between 0.50 mol/L and 0.75 mol/L groups in terms of adhesion. These findings indicated that graft polymerization of MPC on acrylic denture base material reduces the adhesion of C. albicans, and may be evaluated as a coating for prevention of denture stomatitis.

Effects of water-aging for 6 months on the durability of a novel antimicrobial and protein-repellent dental bonding agent

Biofilms at the tooth-restoration bonded interface can produce acids and cause recurrent caries. Recurrent caries is a primary reason for restoration failures. The objectives of this study were to synthesize a novel bioactive dental bonding agent containing dimethylaminohexadecyl methacrylate (DMAHDM) and 2-methacryloyloxyethyl phosphorylcholine (MPC) to inhibit biofilm formation at the tooth-restoration margin and to investigate the effects of water-aging for 6 months on the dentin bond strength and protein-repellent and antibacterial durability. A protein-repellent agent (MPC) and antibacterial agent (DMAHDM) were added to a Scotchbond multi-purpose (SBMP) primer and adhesive. Specimens were stored in water at 37 °C for 1, 30, 90, or 180 days (d). At the end of each time period, the dentin bond strength and protein-repellent and antibacterial properties were evaluated. Protein attachment onto resin specimens was measured by the micro-bicinchoninic acid approach. A dental plaque microcosm biofilm model was used to test the biofilm response. The SBMP + MPC + DMAHDM group showed no decline in dentin bond strength after water-aging for 6 months, which was significantly higher than that of the control (P < 0.05). The SBMP + MPC + DMAHDM group had protein adhesion that was only 1/20 of that of the SBMP control (P < 0.05). Incorporation of MPC and DMAHDM into SBMP provided a synergistic effect on biofilm reduction. The antibacterial effect and resistance to protein adsorption exhibited no decrease from 1 to 180 d (P > 0.1). In conclusion, a bonding agent with MPC and DMAHDM achieved a durable dentin bond strength and long-term resistance to proteins and oral bacteria. The novel dental bonding agent is promising for applications in preventive and restorative dentistry to reduce biofilm formation at the tooth-restoration margin.

Superhydrophilic co-polymer coatings on denture surfaces reduce Candida albicans adhesion-An in vitro study

OBJECTIVE

In this study, we aimed to investigate denture-base-resin coatings prepared with a crosslinkable co-polymer containing sulfobetaine methacrylamide (SBMAm) and the relationship between their surface characteristics and the initial adhesion of Candida albicans (C. albicans).

METHODS

Acrylic resin discs were coated with co-polymers containing various concentrations of SBMAm and N,N'-(4,7,10-trioxa-1,13-tridecadiamine) diacrylamide (JDA) as crosslinking agent. Uncoated discs were used as controls. An acquired pellicle was formed on each disc using artificial saliva, and the discs were immersed in a suspension of C. albicans (JCM2085) cells. After incubation, tetrazolium salt (XTT-reduction) and colony forming unit (CFU) assays were performed and the morphogenesis of C. albicans was examined using scanning electron microscopy (SEM). The surface roughness, film thickness, and the water contact angle of each disc surface were measured.

RESULTS

All coating groups showed significantly lower amounts of adhered C. albicans in the XTT-reduction and CFU assays than the control, confirmed by the SEM images. Many wrinkle structures were observed on the surfaces coated with co-polymers containing more than 30% SBMAm. There were no significant differences in surface roughness among all groups. The co-polymer films on the coated discs were less than 5.0 μm in thickness, and these surfaces exhibited significantly lower mean water contact angles than the control.

CONCLUSION

Crosslinkable co-polymers containing SBMAm can enhance the hydrophilicity of the surface of denture-base resins and reduce the initial adhesion of C. albicans.

Antibacterial activity, cytotoxicity and mechanical behavior of nano-enhanced denture base resin with different kinds of inorganic antibacterial agents

Silanized aluminum borate whiskers (ABWs) of 4 wt%, silanized zirconium dioxide nanoparticles (nano-ZrO₂) of 2 wt% were mixed with polymethyl methacrylate (PMMA) powder to get ZrO₂-ABWs/PMMA composites. Titanium dioxide (TiO₂), silver-supported titanium dioxide (Ag/TiO₂), silver-supported zirconium phosphate (Novaron) and tetrapod-like zinc oxide whiskers (T-ZnOw) antibacterial agents of 3 wt% were mixed with ZrO₂-ABWs/PMMA composites respectively to fabricate standard specimens. Plaque biofilms on the specimens surface were investigated for colony-forming units (CFUs). In addition, cytotoxicity and mechanical behavior were evaluated. Results showed that the CFUs values of S. mutans and C. albican biofilms on the four antibacterial composites surface were all reduced (p<0.05) compared to the blank and control groups. The antibacterial composites did not have an adverse effect on fibroblast growth in this study (p>0.05) except TiO₂ and Ag/TiO₂ groups of undiluted extracts. The flexural strength and surface hardness of Novaron and T-ZnOw groups were increased (p<0.05) compared to the control group.

Inhibition of denture plaque deposition on complete dentures by 2-methacryloyloxyethyl phosphorylcholine polymer coating: A clinical study

STATEMENT OF PROBLEM

Denture plaque-associated infections are regarded as a source of serious dental and medical complications in the elderly population. Methods of managing this problem are needed.

PURPOSE

The purpose of this clinical study was to evaluate the effects of treatment with a 2-methacryloyloxyethyl phosphorylcholine polymer, PMBPAz, on plaque deposition in complete dentures.

MATERIAL AND METHODS

The study protocol was approved by the Ethics Committee of Showa University (#2013-013). Eleven individuals with maxillary complete dentures participated in this study. Their dentures were treated with PMBPAz, and the amount of denture plaque accumulation was evaluated by staining the denture surfaces with methylene blue after 2 weeks of denture usage. The same procedures were repeated to evaluate the original denture surfaces as a control. The image of the stained denture surface was captured using a digital camera, and the percentage of stained area, quantified as a pixel-based density, of the whole denture area (percentage of plaque index) was calculated for the mucosal and polished surfaces. To quantify the biofilm on the dentures, denture plaque biofilm was detached by ultrasonic vibration, resuspended in diluent, and measured with a microplate reader at an optical density of 620 nm. The effects of PMBPAz treatment on these variables were statistically analyzed with ANOVA (α=.05).

RESULTS

The mean ±SD percentage of plaque index was 40.7% ±19.9% on the mucosal surfaces and 28.0% ±16.8% on the polished surfaces of the control denture. The mean percentage of plaque index of PMBPAz-treated dentures significantly decreased to 17.4%% ±12.0% on the mucosal surfaces (P<.001) and 15.0% ±9.9% on the polished surfaces (P<.05). The quantification of plaque deposition agreed with the results of these image analyses.

CONCLUSIONS

These results demonstrated the effectiveness of the treatment with the PMBPAz to inhibit the bacterial plaque deposition on complete dentures.

Current Insights into the Modulation of Oral Bacterial Degradation of Dental Polymeric Restorative Materials

Dental polymeric composites have become the first choice for cavity restorations due to their esthetics and capacity to be bonded to the tooth. However, the oral cavity is considered to be harsh environment for a polymeric material. Oral biofilms can degrade the polymeric components, thus compromising the marginal integrity and leading to the recurrence of caries. Recurrent caries around restorations has been reported as the main reason for restoration failure. The degradation of materials greatly compromises the clinical longevity. This review focuses on the degradation process of resin composites by oral biofilms, the mechanisms of degradation and its consequences. In addition, potential future developments in the area of resin-based dental biomaterials with an emphasis on anti-biofilm strategies are also reviewed.

Effects of Long-Term Water-Aging on Novel Anti-Biofilm and Protein-Repellent Dental Composite

The aims of this study were to: (1) synthesize an anti-biofilm and protein-repellent dental composite by combining 2-methacryloyloxyethyl phosphorylcholine (MPC) with quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM); and (2) evaluate the effects of water-aging for 180 days on protein resistance, bacteria-killing ability, and mechanical properties of MPC-DMAHDM composite. MPC and DMAHDM were added into a resin composite. Specimens were stored in distilled water at 37 °C for 1, 30, 90, and 180 days. Mechanical properties were measured in three-point flexure. Protein attachment onto the composite was evaluated by a micro bicinchoninic acid approach. An oral plaque microcosm biofilm model was employed to evaluate oral biofilm viability vs. water-aging time. Mechanical properties of the MPC-DMAHDM composite after 180-day immersion matched those of the commercial control composite. The composite with 3% MPC + 1.5% DMAHDM had much stronger resistance to protein adhesion than control (p < 0.05). MPC + DMAHDM achieved much stronger biofilm-eradicating effects than MPC or DMAHDM alone (p < 0.05). Biofilm colony-forming units on the 3% MPC + 1.5% DMAHDM composite were three orders of magnitude lower than commercial control. The protein-repellent and antibacterial effects were durable and showed no loss in water-aging from 1 to 180 days. The novel MPC-DMAHDM composite possessed strong and durable resistance to protein adhesion and potent bacteria-eradicating function, while matching the load-bearing ability of a commercial dental composite. The novel MPC-DMAHDM composite represents a promising means of suppressing oral plaque growth, acid production, and secondary caries.

2-Methacryloyloxyethyl Phosphorylcholine Polymer Treatment of Complete Dentures to Inhibit Denture Plaque Deposition

Removable dentures made of poly (methyl methacrylate) (PMMA) are prone to bacterial adherence and dental plaque formation, which is called denture plaque. Denture plaque-associated infection is a source of serious dental and medical complications in the elderly. 2-Methacryloyloxyethyl phosphorylcholine (MPC) is a well-known biomedical material that exhibits marked antithrombogenicity and tissue compatibility because of its high resistance to protein adsorption and cell adhesion. Therefore, MPC polymer coatings are suggested to have the potential to inhibit plaque deposition on the surface of PMMA dentures. However, coating MPC polymer on the surface of a PMMA denture is a complex procedure that requires specialized equipment, which is regarded as a major barrier to its clinical application. Here, we introduce a new MPC polymer treatment procedure that uses poly (MPC-co-BMA-co-MPAz) (PMBPAz) to prevent denture plaque deposition on removable dentures. This procedure enables the MPC coating of PMMA denture surfaces in a simple and stable manner that is resistant to various chemical and mechanical stresses due to the MPC layer of PMBPAz that is covalently bound to the PMMA surface by ultraviolet light irradiation. In addition, the procedure does not require any specialized equipment and can be completed by clinicians within 2 min. We applied this procedure in a clinical setting and demonstrated its clinical utility and efficacy in inhibiting plaque deposition on removable dentures.

Novel protein-repellent dental adhesive containing 2-methacryloyloxyethyl phosphorylcholine

OBJECTIVES

Biofilms at tooth-restoration margins can produce acids and cause secondary caries. A protein-repellent adhesive resin can potentially inhibit bacteria attachment and biofilm growth. However, there has been no report on protein-repellent dental resins. The objectives of this study were to develop a protein-repellent bonding agent incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC), and to investigate its resistance to protein adsorption and biofilm growth for the first time.

METHODS

MPC was incorporated into Scotchbond Multi-Purpose (SBMP) at 0%, 3.75%, 7.5%, 11.25%, and 15% by mass. Extracted human teeth were used to measure dentine shear bond strengths. Protein adsorption onto resins was determined by a micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to measure biofilm metabolic activity and colony-forming unit (CFU) counts.

RESULTS

Adding 7.5% MPC into primer and adhesive did not decrease the dentine bond strength, compared to control (p>0.1). Incorporation of 7.5% of MPC achieved the lowest protein adsorption, which was 20-fold less than that of control. Incorporation of 7.5% of MPC greatly reduced bacterial adhesion, yielding biofilm total microorganism, total streptococci, and mutans streptococci CFU that were an order of magnitude less than control.

CONCLUSIONS

A protein-repellent dental adhesive resin was developed for the first time. Incorporation of MPC into primer and adhesive at 7.5% by mass greatly reduced the protein adsorption and bacterial adhesion, without compromising the dentine bond strength.

CLINICAL SIGNIFICANCE

The novel protein-repellent primer and adhesive are promising to inhibit biofilm formation and acid production, to protect the tooth-restoration margins and prevent secondary caries.

Materials and surface modification for tissue engineered vascular scaffolds

Although vascular implantation has been used as an effective treatment for cardiovascular disease for many years, off-the-shelf and regenerable vascular scaffolds are still not available. Tissue engineers have tested various materials and methods of surface modification in the attempt to develop a scaffold that is more suitable for implantation. Extracellular matrix-based natural materials and biodegradable polymers, which are the focus of this review, are considered to be suitable materials for production of tissue-engineered vascular grafts. Various methods of surface modification that have been developed will also be introduced, their impacts will be summarized and assessed, and challenges for further research will briefly be discussed.

Effect of denture-coating composite on Candida albicans biofilm and surface degradation after disinfection protocol

INTRODUCTION

Denture stomatitis is the most common pathology affecting denture wearers and its main cause is colonisation of dentures with Candida albicans.

OBJECTIVE

This study investigated the effectiveness of two commercial composite surface sealants (Biscover(®) LV and Surface Coat(®)) to reduce C. albicans biofilm colonisation on denture resin, as well as their surface integrity after disinfection cycles with 1% sodium hypochlorite solution.

METHODS

Heat-cured acrylic resin specimens were manufactured (10 mm × 10 mm × 1 mm). The specimen surfaces were mechanically polished to simulate rough or smooth denture surfaces. Four surface-treatment groups were tested: smooth surfaces [0.3 μm of mean roughness (Ra)]; rough surfaces (3 μm of Ra); rough surfaces treated with Biscover(®) LV; and rough surfaces treated with Surface Coat(®). Specimens of each group were randomly divided to undergo immersion in distilled water or 1% sodium hypochlorite for 30 or 90 cycles each. Specimens of all groups in each immersion solution were tested using a crystal violet (CV) staining assay for biofilm quantification and by scanning electron microscopy for visual analyses of surface integrity and biofilm structure. CV assay data were analysed using one-way analysis of variance (ANOVA) followed by Tukey's multiple comparison test (P < 0.05).

RESULTS

The effectiveness and surface integrity of Biscover(®) LV-treated surfaces were similar to those of smooth surfaces, whereas Surface Coat(®) -treated surfaces presented a similar performance to rough surfaces in all solutions and cycles.

CONCLUSION

These results suggest the possibility of clinical use of Biscover(®) LV for denture coating on surfaces in which mechanical polish is not indicated, such as the fitting surface.

Prevention of bacterial adhesion and biofilm formation on a vitamin E-blended, cross-linked polyethylene surface with a poly(2-methacryloyloxyethyl phosphorylcholine) layer

In the construction of artificial hip joint replacements, the surface and substrate of a cross-linked polyethylene (CLPE) liner are designed to achieve high wear resistance and prevent infection by bacteria. In this study, we fabricated a highly hydrophilic and antibiofouling poly(2-methacryloyloxyethyl phosphorylcholine [MPC]) (PMPC)-graft layer on the vitamin E-blended CLPE (HD-CLPE(VE)) surface. The 100-nm-thick, smooth, and electrically neutral PMPC layer was successfully fabricated on the HD-CLPE(VE) surface using photoinduced graft polymerization. The PMPC-grafted HD-CLPE(VE) was found to prevent bacterial adherence and biofilm formation on the surface because of the formation of a highly hydrophilic polyzwitterionic layer on the surface of HD-CLPE(VE), which can serve as an extremely efficient antibiofouling layer. The number of bacterial adhered on the PMPC-grafted HD-CLPE(VE) surface was reduced by 100-fold or more by PMPC grafting, regardless of the biofilm-production characteristics of the strains. In contrast, vitamin E blending did not affect bacterial adhesion. Moreover, the number of planktonic bacteria did not differ significantly, regardless of PMPC grafting and vitamin E blending. In conclusion, the PMPC-grafted HD-CLPE(VE) provided bacteriostatic effects associated with smooth, highly hydrophilic surfaces with a neutral electrostatic charge owing to the zwitterionic structure of the MPC unit. Thus, this modification may prove useful for the production of artificial hip joint replacement materials.

STATEMENT OF SIGNIFICANCE

Our preliminary in vitro findings suggest that improved bacteriostatic performance of the HD-CLPE(VE) surface in orthopedic implants is possible via PMPC grafting. The results also indicate that surface modifications affect the anti-infection properties of the orthopedic implants and demonstrate that the application of a PMPC-grafted HD-CLPE(VE) surface may be a promising approach to extend the longevity and clinical outcomes of total hip arthroplasty. Further research is needed to evaluate the resistance to infection of PMPC-grafted HD-CLPE(VE) in terms of the varieties of biofilm formation tests including fluid flow conditions and animal experiments, which may offer useful clues to the possible performance of these materials in vivo.

Development of novel dental adhesive with double benefits of protein-repellent and antibacterial capabilities

OBJECTIVES

Secondary caries at the tooth-restoration margins remains a main reason for restoration failure. The objectives of this study were to: (1) combine protein-repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) with quaternary ammonium dimethylaminohexadecyl methacrylate (DMAHDM) to develop a new dental adhesive with double benefits of protein-repellent and antibacterial capabilities for the first time; and (2) investigate the effects on protein adsorption, anti-biofilm activity, and dentin bond strength.

METHODS

MPC and DMAHDM were incorporated into Scotchbond Multi-Purpose (SBMP) primer and adhesive. Dentin shear bond strengths were measured using extracted human molars. Protein adsorption onto the adhesive resin surfaces was determined by the micro bicinchoninic acid (BCA) method. A dental plaque microcosm biofilm model with human saliva as inoculum was used to investigate biofilm metabolic activity, colony-forming unit (CFU) counts, lactic acid production and live/dead staining of biofilms on resins.

RESULTS

Incorporation of 7.5% MPC and 5% DMAHDM into primer and adhesive did not adversely affect the dentin shear bond strength (p>0.1). The resin with 7.5% MPC+5% DMAHDM had protein adsorption that was nearly 20-fold less than SBMP control (p<0.05). The resin with 7.5% MPC+5% DMAHDM had much stronger antibacterial effects than using MPC or DMAHDM alone (p<0.05). Biofilm CFU counts on the resin with 7.5% MPC+5% DMAHDM were reduced by more than 4 orders of magnitude, compared to SBMP control.

SIGNIFICANCE

The use of double agents (protein-repellent MPC+antibacterial DMAHDM) in dental adhesive achieved much stronger inhibition of biofilms than using each agent alone. The novel protein-repellent and antibacterial bonding agent is promising to reduce biofilm/plaque buildup and reduce recurrent caries at the tooth-restoration margins.

Novel protein-repellent and biofilm-repellent orthodontic cement containing 2-methacryloyloxyethyl phosphorylcholine

The objectives of this study were to develop the first protein-repellent resin-modified glass ionomer cement (RMGI) by incorporating 2-methacryloyloxyethyl phosphorylcholine (MPC) for orthodontic applications, and to investigate the MPC effects on protein adsorption, biofilm growth, and enamel bond strength. MPC was incorporated into RMGI at 0% (control), 1.5%, 3%, and 5% by mass. Specimens were stored in water at 37°C for 1 and 30 days. Enamel shear bond strength (SBS) was measured, and the adhesive remnant index (ARI) scores were assessed. Protein adsorption onto the specimens was determined by a micro bicinchoninic acid method. A dental plaque microcosm biofilm model with human saliva as inoculum was used. The results showed that adding 3% of MPC into RMGI did not significantly reduce the SBS (p > 0.1). There was no significant loss in SBS for RMGI containing 3% MPC after water-aging for 30 days, as compared to 1 day (p > 0.1). RMGI with 3% MPC had protein adsorption that was 1/10 that of control. RMGI with 3% MPC greatly reduced the bacterial adhesion, and lactic acid production and colony-forming units of biofilms, while substantially increasing the medium solution pH containing biofilms. The protein-repellent and biofilm-repellent effects were not decreased after water-aging for 30 days. In conclusion, the MPC-containing RMGI is promising to reduce biofilms and white spot lesions without compromising orthodontic bracket-enamel bond strength. The novel protein-repellent method may have applicability to other orthodontic cements, dental composites, adhesives, sealants, and cements to repel proteins and biofilms. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 949-959, 2016.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.