A prospective evaluation of zirconia anterior partial fixed dental prostheses: Clinical results after seven years

Influence of different cutting instruments and rotational speeds on heat generation and cutting efficiency when sectioning different types of zirconia

PURPOSE

The purpose of this study was to evaluate the temperature generated on the intaglio surface and efficiency when cutting different types of zirconia with different rotary instruments and rotational speeds.

METHODS

A conventional diamond rotary instrument (Brasseler, grit size 107 μm) and special diamond rotary instrument marketed to cut zirconia (4 ZR, Brasseler, grit size 126 μm) were tested on 3Y-TZP and 4Y-TZP zirconia with a rotation speed of 100,000 rpm and 200,000 rpm. Zirconia specimens were cut under water cooling (110 mL/min) in a custom-made holder attached to a universal testing machine. The temperature was recorded with infrared sensors pointing at the intaglio surface of the zirconia specimens.

RESULTS

A rotation speed of 200,000 rpm resulted in significantly shorter cutting times, but also in significantly higher temperatures at the intaglio surface of the zirconia specimens compared with a rotation speed of 100,000 rpm. Significantly shorter cutting times were observed for the conventional diamond rotary instrument than for the special rotary instrument marketed to cut zirconia. Using the special rotary instrument, significantly longer cutting times were recorded for 3Y-TZP than for 4Y-TZP.

CONCLUSIONS

A conventional diamond rotary instrument was more efficient than a special rotary instrument. However, to avoid high temperatures when cutting zirconia clinically, a rotation speed of 100,000 rpm is recommended.

Clinical performance of zirconia-based tooth-supported fixed dental prostheses: A systematic review and meta-analysis

OBJECTIVES

This study aimed to investigate the clinical performance of zirconia-based fixed dental prostheses (FDPs) in comparison to metal-ceramic (MC) FDPs.

METHODS

A comprehensive search on MEDLINE (PubMed), Web of Science (Core Collection), Scopus up to June 2024 was conducted. Studies that compared the success, survival and complication rates between zirconia based FDPs and MC FDPs were eligible for inclusion.

RESULTS

Thirty-one articles were identified, of which 22 were included for systematic review and 7 RCTs were included for meta-analysis. 10, 9 and 3 studies were classified to mean follow-up ≤ 5 years, 5 years < mean Follow-up ≤ 10 years, mean Follow-up >10 years, respectively. In the pooled analysis, 180 bilaminar zirconia (ZC) FDPs and 206 MC FDPs were included. ZC FDPs were significantly associated with more failures (RR=3.64, p = 0.009) and more Ceramic Chipping (RR=2.92, p < 0.0001) when compared to MC FDPs. Higher risks of Framework Fracture (RR=4.57, p = 0.18), Loss of Retention (RR=4.79, p = 0.17), Secondary Caries (RR=1.25, p = 0.68), Endodontic complications (RR=1.30, p = 0.74) and Marginal Integrity (RR=1.07, p = 0.88) were also found in ZC FDPs when compared to those of MC FDPs, but with no statistical difference.

CONCLUSION

The current evidence continues to support the preference for traditional MC FDPs over ZC FDPs. Studies indicate that ZC FDPs have higher failure rates and more complications compared to MC FDPs, with ceramic chipping being a significant concern. There is lack of long term (>10 years follow-up) evidence of the clinical performance of ZC FDPs and monolithic zirconia FDPs.

CLINICAL SIGNIFICANCE

The study suggests that despite the growing popularity of zirconia, evidence shows MC FDPs may still be considered preferable to ZC FDPs.

Vertical Marginal Discrepancy of a Monolithic Zirconia Crown with Different Cement Spaces

The long-term clinical success of indirect restorations highly depends on their marginal integrity. The cement space is an element that might affect the marginal integrity, but it can be altered during the configuring of the computer-assisted designing/computer-aided manufacturing (CAD-CAM) restoration. However, there is controversy in the literature regarding the effect of the cement space on the precision of zirconia crown marginal adaptation. The aim of this study was to measure the vertical marginal discrepancies between different cement thickness settings for CAD-CAM monolithic zirconia restorations. Material and Methods. An artificial mandibular right molar tooth mounted on a typodont was prepared for a zirconia crown using the standard method. The study sample consisted of 30 zirconia crowns (Zenostar Zr Translucent Zirconia, Weiland Dental, Germany) milled using an (iMes-iCore) milling machine. Each group of 10 crowns was designed with 30-50 and 70 μm spacer thicknesses. The vertical marginal adaptation at the center of the four different planes (mesial, distal, buccal, and palatal) was measured under a microscope at 40x magnification. A one-way analysis of variance test was used for statistical analysis. Results. The mean of Group 30 was 27.45; of Group 50 was 22.22; and of Group 70 was 22.90. There was no statistically significant difference between the groups (p ≥ 0.5). Conclusions. The increase in the cement space up to 70 μm did not influence the vertical marginal adaptation of the monolithic zirconia crowns.

Quality of Fixed Dental Prostheses and Patient Satisfaction in a Sample From Saudi Arabia

BACKGROUND

The objective of the study was to retrospectively assess the clinical performance of dental prostheses, single crowns, and three-unit bridges to identify clinical biological and mechanical complications in the Ha'il province of Saudi Arabia.

METHODS

The study was conducted between March 2021 to October 2021 and included 421 patients who underwent crown and tooth-supported fixed partial denture (FPD) procedures at the Dental Polyclinics Center in the Ha'il region of Saudi Arabia from 2010-2020. The planned sampling approach was applied. Patients who underwent crown and FPD placements at the dental center within the scheduled period were identified through clinical assessments. The inclusion criteria were met by patients with three-unit FPDs and a single crown containing a natural contralateral tooth or teeth. A total of six general dentists conducted clinical exams. Patient satisfaction and technical and biological issues were the evaluation criteria for crowns and FPDs. The frequency and percentage of the various characteristics employed in the current investigation were ascertained using cross-tabulation. The Chi-square test was employed to assess the associations between categorical variables, with p-values ≤ 0.05 considered significant.  Results: Marginal integrity was recorded in 332 participants (78.9%), which was satisfactory for the majority of the restoration. The acceptance morphology was present in 252 (59.9%) restorations. The highest rate of the restorations 274 (66.2%) had satisfactory color. In 86 cases (20.4%), there was visible periodontal depth of at least 5 mm. Three hundred and six (72.7%) of the fixed restorations had gingival bleeding connected to them, and 96 (22.8%) teeth had periapical lesions. A total of 311 patients (73.9%) reported they were satisfied with their fixed restorations.

CONCLUSIONS

The technical and biological complications noted in the current study were not higher compared with other studies of crowns and fixed dental prostheses. The majority of patients were satisfied with the restoration.

Technical complications with tooth-supported fixed dental prostheses (FDPs) of different span lengths: an up to 15-year retrospective study

BACKGROUNDS

Long-span dental bridges may cause excessive load on abutment teeth and the periodontal area, which may lead to bridge fractures or periodontal problems. However, some reports have revealed that short- and long-span bridges can provide a similar prognosis. This clinical study aimed to investigate the technical complications associated with fixed dental prostheses (FDPs) of different span lengths.

METHODS

All patients with previously cemented FDPs were clinically examined during their follow-up visits. Several data related to FDPs were registered, such as design, material type, location, and type of complication. The main clinical factors analyzed were technical complications. Life table survival analyses were performed to calculate the cumulative survival rate of FDPs when technical complications were detected.

RESULTS

The study examined 229 patients with a total number of 258 prostheses and an average of 98 months of follow-up. Seventy-four prostheses suffered from technical complications, and the most common complication was ceramic fracture or chipping (n = 66), while loss of retention occurred in 11 prostheses. The long-term evaluation of long-span prostheses revealed a significantly higher technical complication rate compared to short-span prostheses (P = ,003). The cumulative survival rate for short-span FDPs was 91% in year 5, 68% in year 10, and 34% in year 15. For long-span FDPs, the cumulative survival rate was 85% in year 5, 50% in year 10, and 18% in year 15.

CONCLUSION

Long-span prostheses (5 units or more) can be associated with a higher technical complication rate compared to short-span prostheses after long-term evaluation.

Secondary caries in fixed dental prostheses: Long-term clinical evaluation

OBJECTIVES

Even with excellent fixed dental prostheses (FDPs), there will be a substantial risk of biological complications, such as caries, if proper oral hygiene is not maintained. This study aimed to evaluate the risks of developing secondary caries with FDPs in relation to the patient oral hygiene status.

MATERIAL AND METHODS

Clinical and radiographic examinations were performed for patients to collect data related to their FDP complications and oral hygiene status. The main clinical parameter analyzed was secondary caries. Complications such as a fracture, debonding, or the need for endodontic therapy were also analyzed. The interval survival rate and the cumulative survival rate of FDPs from the time of treatment to the time of follow-up were analyzed.

RESULTS

A total of 423 patients (with a total of 1116 FDPs) were examined in this study, with a mean age of 43.7 years and a mean follow-up time of 7 years. Regarding complications, secondary caries was detected in 94 FDPs (8.4%), fracture (or chipping) in 85 (7.6%) cases, need for endodontic treatment in 42 cases (3.7%), and debonding in four (0.3%) cases. Secondary caries was found in nine out of 219 FDPs (4%) in patients with good oral hygiene, 35 out of 634 FDPs (5.5%) in patients with fair oral hygiene, and 50 out of 272 FDPs (18.4%) in patients with poor oral hygiene (p ≤ .001).

CONCLUSIONS

Good oral hygiene has a great influence on reducing the risk of secondary caries in patients with FDPs. The occurrence of secondary caries is a common complication in patients with poor oral hygiene.

Evaluation and Comparison of Five-Year Survival of Tooth-Supported Porcelain Fused to Metal and All-Ceramic Multiple Unit Fixed Prostheses: A Systematic Review

The prosthesis must have good survival despite being functional for at least 5-10 years. This makes sure that the replacement of missing teeth does not become a repeated expense. Of 579 identified articles, 15 met the inclusion criteria for systematic review. Missing teeth replacement materials are divided into two groups: porcelain fused to metal and all ceramics. Data related to survival rates as well as the most common mode of failure is observed from both groups. It was observed that porcelain fused to metal prostheses had an approximately 99.5% survival rate and an approximately 92% survival rate for all-ceramic tooth-supported prostheses after five years of insertion. Porcelain-fused-to-metal (PFM) prostheses had a better survival rate after five years of insertion as compared to all-ceramic prostheses. Porcelain fused to metal should be the treatment of choice for dentists and patients when missing teeth need to be fixed.

Do tooth-supported zirconia restorations present more technical failures related to fracture or loss of retention? Systematic review and meta-analysis

OBJECTIVES

This systematic review was performed to determine the main cause of technical failure of tooth-supported zirconia crowns and fixed partial dentures (FPDs), categorizing them as fracture/chipping or loss of retention/decementation.

MATERIALS AND METHODS

Electronic and manual searches were performed for randomized clinical trials, prospective clinical trials, and prospective cohort studies that reported the technical failure rates of zirconia restorations. The Cochrane Collaboration risk-of-bias tool and Newcastle-Ottawa scale were used to assess the quality of the studies.

RESULTS

Fifty-two studies were included and most of them had unclear risk of bias. Considering all reported fractures/chipping, for veneered crowns with 1 to 3 years of follow-up, the relative risk (RR) of fracture in relation to loss or retention was 3.95 (95% CI 1.18-13.23; p = 0.03). For 4 to 6 years of follow-up, the RR was 5.44 (95% CI 1.41-20.92; p = 0.01). For veneered FPDs with 1 to 3 years of follow-up, the RR was 5.98 (95% CI 2.31-15.01; p = 0.0002). For 4 to 6 years of follow-up, the RR was 3.70 (95% CI 1.63-8.41; p = 0.002). For 7 years or more of follow-up, the RR was 3.45 (95% CI 1.84-6.46; p = 0.0001). When only framework fractures were considered, there were no significant differences for the RR in all follow-up periods (p > 0.05).

CONCLUSIONS

Higher RR for fracture/chipping in relation to decementation for veneered zirconia crowns and FPDs at all follow-up times. For framework fractures, no difference was observed between the risk of failure of the restoration due to fracture or decementation.

CLINICAL RELEVANCE

Zirconia crowns and FPDs showed relatively high success and survival rates. However, considering the technical failures, there is approximately four times higher chance of fracture/chipping than loss of retention for both single and multi-unit tooth-supported veneered zirconia restorations.

Effect of ethyl cellulose coating as an evaluation agent against contamination on the bond strength of zirconia restorations: An in vitro study

STATEMENT OF PROBLEM

During the trial placement of zirconia restorations, contamination of the bonding surface is inevitable. Although cleaning methods for contaminated surfaces have been described, a method of preventing saliva contamination of the bonding surface of zirconia restorations is lacking.

PURPOSE

The purpose of this in vitro study was to investigate an ethyl cellulose coating as an evaluation agent to mitigate the effects of saliva contamination on the bond strength of zirconia restorations.

MATERIAL AND METHODS

Experimental groups representing different cleaning methods of tetragonal yttria-stabilized tetragonal zirconia polycrystal (4Y-TZP) surfaces were investigated for shear bond strength with a resin luting agent, and the failure mode was analyzed. The 9.0×7.0×5.0-mm zirconia blocks (n=72) were assigned as follows: Group N: uncontaminated control; Group CU: contaminated with saliva, followed by ultrasonic cleaning with ethanol; Group CI: contaminated with saliva, followed by application of a zirconia cleaner; Group PCW: preapplication of a zirconia primer, contaminated with saliva, followed by cleaning with water spray; Group ECU: precoating with the ethyl cellulose agent, contaminated with saliva, followed by removal of the agent in an ultrasonic bath with ethanol. Each group was divided into 3 subgroups (immediate, short-term aging, and long-term aging), and the shear bond strength was measured (n=24). To analyze the bonding surface characteristics, the contact angle was measured (n=5). The surfaces of the zirconia specimens in each experimental group were evaluated by using a field emission scanning electron microscope (n=5). Time-of-flight secondary ion mass spectroscopy was used for the chemical analysis of the conditioned surfaces (n=3). A 2-way analysis of variance (ANOVA) with main effect model for shear bond strength results and a 1-way ANOVA for contact angle data were performed as statistical analysis, followed by the Bonferroni post hoc test (α=.05).

RESULTS

The shear bond strength was significantly higher in the ECU group than in the groups with the other cleaning methods (P<.05). After the removal of ethyl cellulose with ethanol, the contact angle and surface topography were found to be similar to those of the control group, and no saliva contaminants were identified in the spectroscopy analysis.

CONCLUSIONS

Coating with ethyl cellulose may protect the bonding surface of zirconia restorations from salivary contamination better than cleaning a contaminated surface.

Zirconia surface infiltration with low-fusing glass: A surface treatment modality to enhance the bond strength between zirconia and veneering ceramic

Background

The pursuit of esthetics and superior mechanical properties prompted the layering of Yttrium stabilized Zirconia with ceramic material. However, the bioinert nature of zirconia causes the chipping off of this ceramic layer. Selective infiltration etching (SIE) of zirconia provides good bond strength between zirconia and veneering ceramic.

Materials and Methods

One hundred and fifty zirconia specimens of dimensions 5 × 5 × 10 mm were divided into 5 groups. Group 1: Air abrasion with 30 μ Al₂O₃ for 15 s with 0.4 bar pressure. Group 2: SIE and heat-induced maturation (HIM) as demonstrated by Abousheilb. Group 3: Sintered zirconia specimens were taken up for air abrasion followed by SIE/HIM. Group 4: Air abrasion and SIE performed on unsintered specimens followed by heat treatment at 1500°C. Group 5: Air abrasion performed on unsintered zirconia specimens followed by heat treatment at 1500°C followed by SIE/HIM. The samples were then layered with ceramic and subjected to shear bond strength (SBS) analysis.

Results

The mean and standard deviation were calculated for the data. The mean SBS among the groups was compared using ANOVA. The post hoc Bonferroni test was applied to compare between the groups. The mean SBS was highest for Group 5 (47.89 ± 6.53) followed by Group 2 (34.94 ± 3.04), Group 3 (32.56 ± 6.04), Group 1 (29.12 ± 7.37), and Group 4 (27.56 ± 7.54). ANOVA test showed statistically significant differences among the groups (F = 48.86, P = 0.00).

Conclusion

SIE/HIM when combined with sandblasting with appropriate heat treatment demonstrated a significant increase in bond strength. This prolongs the longevity of the restoration, thereby meeting the clinical needs.

Bonding properties of third-generation zirconia CAD-CAM blocks for monolithic restorations to composite and resin-modified glass-ionomer cements

PURPOSE

To compare the interfacial fracture toughness (IFT) of two MDP-based composite cements and a resin-modified glass-ionomer cement (RMGIC) with third-generation zirconia CAD-CAM restorations using two different airborne-particle abrasion (AB) pressures.

METHODS

Blocks were cut into prisms (n=60), split and sintered to the desired equilateral half prisms. Half-prisms were divided into two groups for AB at 0.5 or 2.5 bar with 50 µm Al₂O₃ particles. Each group was then further divided into 3 subgroups, and half-prisms were bonded to their counterparts with Panavia V5 (V5), Panavia Self Adhesive Cement Plus (SA), or RMGIC Fuji Plus (n=10/group). The IFT was determined using the Notchless Triangular Prism test in a water bath at 36°C after thermocycling (10,000 cycles). Surface roughness and SEM analyses were performed for representative zirconia samples after AB, and composite cements were tested for flexural strength and wettability.

RESULTS

SA (2.5 bar) showed a significantly higher IFT. The 3 other groups with SA and V5 showed no significant difference in their IFT values regardless of the AB pressure (1-way ANOVA). Weibull analysis of SA was higher than V5. All RMGIC samples debonded while thermocycling, and were, therefore, not included in the statistical analysis. Surface roughness increased with increasing AB pressure, and both cements showed similar flexural strength values and good wettability.

CONCLUSION

Contrary to RMGIC, composite cements show high performance with zirconia after AB. Increasing AB pressure enhances the micromechanical retention of composite cement. Future perspectives should include study of the effect of AB pressure on zirconia surface properties.

Effect of processing methods on the chipping resistance of veneered zirconia

OBJECTIVES

To evaluate the edge chipping resistance (R_eA) and the fracture toughness (K_C) of 3Y-TZP bilayers produced with the following materials/processing combinations: fluorapatite glass-ceramic applied on zirconia using the traditional layering and hot-pressing (press-on) techniques; feldspathic porcelain using rapid layer technology (RLT); and lithium disilicate glass-ceramic using CAD-on method. The influence of the cooling rate (slow and fast) was analyzed for layering and hot-pressing.

METHODS

Bilayer bars (25x4x2 mm) were made following manufacturers' instructions. The edge chipping test was performed in an universal testing machine, using a coupled Vickers indenter. R_eA was calculated dividing the critical load at fracture by the edge distance. Fracture toughness was calculated by a regression fit with a fixed slope of 1.5 correlating the critical chipping load regarding edge distance and also with indentation fracture (IF) method. Data were statistically analyzed using ANOVA and Tukey's test (α = 5%).

RESULTS

R_eA and K_C was significantly higher for the CAD-on bilayers. RLT showed intermediate R_eA means, and layering and hot-pressing techniques showed the lowest R_eA values. For both processing methods there was no effect of the cooling protocol on the R_eA and fracture toughness.

CONCLUSIONS

There is a significant effect of the material/processing association on the edge chipping resistance and fracture toughness of the bilayers. There was no effect of the cooling protocol on the edge chipping resistance and fracture toughness for the specimens processed by both the layering and hot-pressing techniques.

Periodontal outcomes of anterior fixed partial dentures on teeth treated with the biologically oriented preparation technique: A 6-year prospective clinical trial

STATEMENT OF PROBLEM

One of the most frequent complications in participants with fixed partial dentures (FPDs) is the apical migration of the gingival margin, which may be associated with factors such as fit, gingival margin location, or tooth preparation type. The prevalence of the complication in participants restored with FPDs prepared by using the biologically oriented preparation technique (BOPT) is unclear.

PURPOSE

The purpose of this prospective clinical trial was to evaluate the clinical and biologic outcomes of FPDs on teeth prepared by using the BOPT, over a 6-year follow-up period.

MATERIAL AND METHODS

Tooth-supported zirconia FPDs in the anterior region prepared by using the BOPT were evaluated. Each participant was monitored annually for 6 years by evaluating plaque index, probing depth, vestibular gingival thickness, and gingival margin stability. Biologic and/or mechanical complications were also recorded. Patient satisfaction was measured by using a visual analog scale (VAS).

RESULTS

A total of 25 FPDs supported by 70 teeth in 24 participants were analyzed. Low plaque index values and stable probing depths were observed, whereas the gingival index was 0 for most of the teeth. Teeth treated by using the BOPT presented significant increase in gingival thickness, and the gingival margin was found to be stable in 100% of the treatments. FPD survival was 100%.

CONCLUSION

Tooth supporting FPDs prepared by using the BOPT presented good periodontal health and gingival margin stability, without recession and with a 100% survival rate during a 6-year follow-up.

Clinical Performance of CAD/CAM All-Ceramic Tooth-Supported Fixed Dental Prostheses: A Systematic Review and Meta-Analysis

Although CAD/CAM ceramics present a promising alternative to metal-ceramic fixed dental prostheses, little is known about their mid- and long-term clinical performance. This systematic review aims to estimate the survival and success rates and describes the underlying complication characteristics for CAD/CAM tooth-supported zirconia- and lithium disilicate-based fixed dental prostheses (FDPs). We systematically searched MEDLINE and Web of Science to find relevant prospective studies with a follow-up of at least one year. We estimated pooled 1-, 5-, and 10-year survival and success rates by combining the collected data in a Poisson regression model. Descriptive statistics were conducted to evaluate the distribution of failures and complications in the included studies. Risk of bias for the included studies was assessed with an adapted checklist for single-arm trials. Pooled estimated 1-, 5-, and 10-year survival rates ranged from 93.80% to 94.66%, 89.67% to 91.1%, and 79.33% to 82.20%, respectively. The corresponding success rates excluding failures, but including any other types of intervention were 94.53% to 96.77%, 90.89% to 94.62%, and 81.78% to 89.25%. Secondary caries was the most frequent cause of failure, followed by chipping of the veneering. The most common cause of complication excluding failures but requiring intervention was chipping of the veneering. Risk of bias was generally acceptable for the included studies, with seven studies associated with low risk of bias, eight studies with a moderate risk of bias, and three studies with serious risk of bias. The current meta-analysis on CAD/CAM-supported FDPs revealed satisfying survival and success rates for up to 10 years of exposure. More prospective studies focusing on long-term performance are needed to strengthen the evidence currently available in the literature.

Clinical outcomes of veneered zirconia anterior partial fixed dental prostheses: A 12-year prospective clinical trial

STATEMENT OF PROBLEM

Anterior veneered zirconia partial fixed dental prostheses (FDPs) have substituted for metal-ceramic to improve esthetics and biocompatibility. However, the material is susceptible to aging or hydrothermal degradation and to chipping of the feldspathic veneer. Whether these susceptibilities limit the clinical performance of anterior veneered zirconia FPDs is unclear.

PURPOSE

The purpose of this prospective clinical study was to analyze the mechanical and biologic behavior of zirconia partial FDPs in the anterior region over a 12-year follow-up period.

MATERIAL AND METHODS

Twenty-seven 3- to 6-unit FDPs fabricated from zirconia veneered with feldspathic porcelain were placed in the anterior region and examined clinically at 1 month, 6 months, and then annually for 12 years, recording mechanical and biologic outcomes. Raw complication rates and time-to-event Kaplan-Meier analysis was conducted and compared as per the partial fixed dental prosthesis type.

RESULTS

Five FDPs had biologic complications (3 with secondary caries, 1 with periapical pathology, 1 with periodontal disease) and 9 had mechanical complications (7 with chipping and 2 with decementation). Chipping was the most prevalent complication and increasingly found with longer-span fixed partial prostheses (P=.007). Five FDPs had to be replaced because of complete failure, the most frequent cause of failure being secondary caries (P=.003). The mean survival rate (no failures) was 11 years 4 months (95% confidence interval, 10.3-12.7).

CONCLUSIONS

Zirconia FDPs had an 81.5% survival rate over 12 years. A higher incidence of complications took place during the first 3 years, the most common being chipping.

Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up

Purpose To evaluate the clinical behavior and survival of full coverage monolithic zirconia crowns on posterior teeth over a 5-year follow-up.Methods Fifty patients were recruited and underwent restoration with a Lava Plus monolithic zirconia crown (Lava™ Frame Zirconia, 3M Espe, Germany) on premolars or molars. Patients were monitored over a 5-year follow-up (2014-19), recording any biological and/or mechanical complications; these data were used to estimate the crowns' success rate. Periodontal clinical parameters were recorded (pocket probing depth (PPD), plaque index (PLI), bleeding on probing (BOP), and gingival recession (GR)). Wear to the zirconia crowns and antagonist teeth were also evaluated with Geomagic software (3D Systems, U.S.A.). Patients' satisfaction with treatment was evaluated in a questionnaire.Results For the 50 monolithic zirconia crowns analyzed, the survival rate was 98% after 5 years. Only 6% of the crowns presented some type of complication (two debonding and one root fracture). No fracture or fissures were detected. GR and BOP were the only clinical parameters found to be significantly greater around teeth restored with crowns. The monolithic zirconia crowns suffered less wear than the enamel of antagonist teeth. Patient's general satisfaction with treatment was high.Conclusions Monolithic zirconia crowns on posterior teeth are a highly predictable treatment option, with a high survival rate. The single treatment failure was due to a biological complication arising from root fracture. This treatment may be recommended as a treatment that conserves dental structure, and requires minimal dental preparation.

Effect of core design on fracture resistance of zirconia-lithium disilicate anterior bilayered crowns

PURPOSE

The effect of core design on the fracture resistance of zirconia-lithium disilicate (LS2) bilayered crowns for anterior teeth is evaluated by comparing with that of metal-ceramic crowns.

MATERIALS AND METHODS

Forty customized titanium abutments for maxillary central incisor were prepared. Each group of 10 units was constructed using the same veneer form of designs A and B, which covered labial surface to approximately one third of the incisal and cervical palatal surface, respectively. LS2 pressed-on-zirconia (POZ) and porcelain-fused-to-metal (PFM) crowns were divided into “POZ_A,” “POZ_B,” “PFM_A,” and “PFM_B” groups, and 6000 thermal cycles (5/55℃) were performed after 24 h storage in distilled water at 37℃. All specimens were prepared using a single type of self-adhesive resin cement. The fracture resistance was measured using a universal testing machine. Failure mode and elemental analyses of the bonding interface were performed. The data were analyzed using Welch's t-test and the Games-Howell exact test.

RESULTS

The PFM_B (1376. 8 ± 93.3 N) group demonstrated significantly higher fracture strength than the PFM_A (915.8 ± 206.3 N) and POZ_B (963.8 ± 316.2 N) groups (P<.05). There was no statistically significant difference in fracture resistance between the POZ_A (1184.4 ± 319.6 N) and POZ_B groups (P>.05). Regardless of the design differences of the zirconia cores, fractures involving cores occurred in all specimens of the POZ groups.

CONCLUSION

The bilayered anterior POZ crowns showed different fracture resistance and fracture pattern according to the core design compared to PFM.

Investigating the shear bond strength of five resin-based luting agents to zirconia ceramics

The present study investigated the bond strength and aging resistance performance of five resin-based luting agents to zirconia. A total of 100 large blocks (10.0 mm × 10.0 mm × 2.5 mm) and 100 small blocks (4.0 mm × 4.0 mm × 2.5 mm) of zirconia were airborne-particle abraded and randomly divided into five groups: (RelyX Ultimate [RUl]; Panavia F [PF]; Clearfil SA Luting [SAC]; Multilink Speed [MS]; and RelyX Unicem [RUn]). The small blocks were bonded to the large blocks using the resin-based luting agents. Shear bond strengths (SBS) and failure mode were determined before and after 5,000 thermocycles. After being stored in water for 24 h, the SBS were MS > PF > RUl > SAC > RUn (P < 0.05). After 5,000 thermocycles, the SBS were MS > SAC ≈ RUl > PF ≈ RUn (P < 0.05); the SBS of the PF, MS, and RUn groups were lower than that before 5,000 thermocycles (P < 0.01). Adhesive failure, cohesive failure, or mixed failure occurred in the specimens. In general, Clearfil SA Luting, a self-adhesive resin-based luting agent containing 10-methacryloxy decyl diphosphate, had good initial and durable SBS to zirconia and was a better adhesive.

CAD/CAM Ceramic Restorative Materials for Natural Teeth

Advances in computer-aided design (CAD) / computer-aided manufacturing (CAM) technologies and their ease of application enabled the development of novel treatment concepts for modern prosthodontics. This recent paradigm shift in fixed prosthodontics from traditional to minimally invasive treatment approaches is evidenced by the clinical long-term success of bonded CAD/CAM glass-ceramic restorations. Today, defect-oriented restorations, such as inlays, onlays, and posterior crowns, are predominately fabricated from glass-ceramics in monolithic application. The variety of CAD/CAM ceramic restorative systems is constantly evolving to meet the increased demands for highly aesthetic, biocompatible, and long-lasting restorations. Recently introduced polymer-infiltrated ceramic network CAD/CAM blocks add innovative treatment options in CAD/CAM chairside 1-visit restorations. The material-specific high-edge stability enables the CAD/CAM machinability of thin restoration margins. Full-contour zirconia restorations are constantly gaining market share at the expense of bilayered systems. Advancements in material science and bonding protocols foster the development of novel material combinations or fabrication techniques of proven high-strength zirconia ceramics. CAD/CAM applications offer a standardized manufacturing process resulting in a reliable, predictable, and economic workflow for individual and complex teeth-supported restorations. More evidence from long-term clinical studies is needed to verify the clinical performance of monolithic polymer-infiltrated ceramic network and zirconia teeth-supported minimally invasive and extensive restorations.

Role of coefficient of thermal expansion on bond strength of ceramic veneered yttrium-stabilized zirconia

Background

Incompatible coefficient of thermal expansion (CTE) is supposed to be a reason for chipping of ceramic veneered zirconia. This study evaluates the effect of veneering ceramic at varied CTE on bond strength to zirconia.

Material and Methods

Zirconia disks (Z, Ø 10 mm, 1.0 mm thickness) were prepared from Y-TZP (Cercon®) and sintered at 1350°C for 6 hours. All zirconia disks were veneered with ceramics ((Ø 7.0 mm, 1.5 mm thickness) with varied CTE including VITADur® alpha (VDα), VITAVM®7 (VM7), VITAVM®9 (VM9), Cercon® ceramkiss (CCK), IPSe.max® ceram (IeC), and IPS dSIGN® (IdS) (n=15). The specimens were thermo-cycled (5-55 °C, 500 cycles) prior to determine the shear bond strength on a universal testing machine. The veneering ceramic and zirconia rods (Ø 4 mm, 30 mm length) were prepared for CTE evaluation. ANOVA and Tukey's multiple comparisons were used to determine the statistically significant difference (α=0.05). Weibull analysis was applied for survival probability, Weibull modulus (m), and characteristics strength (σo) of the shear bond. The interfaces were microscopically examined. The phase transformation of zirconia was determined using X ray diffraction.

Results

The mean±sd (MPa), m, and σo of bond strength were 20.45±2.32, 9.25, and 21.53 for Z-VDα, 19.47±4.53, 4.66, and 20.31 for Z-VM7, 21.05±3.96, 5.61, and 21.88 for Z-IeC, 25.85±2.74, 9.93, and 27.15 for Z-VM9, 25.82±4.39, 6.27, and 27.06 for Z-CCK, and 2.96±0.73, 4.11, and 3.28 for Z-IdS. The CTE (×10-6/°C) were 10.80, 7.83, 7.87, 9.86, 9.93, 10.03, and 12.95 for Z, VDα, VM7, IeC, VM9, CCK, and IdS. The bond strength was significantly affected by the CTE difference (p<0.05). The t→m phase transformation related with the CTE difference.

Conclusions

The CTE's differences induced stress that affected the bond strength. CTE's compatibility of veneering ceramic to zirconia is crucial for enhancing the bond strength. The CTE difference approximately 0.77-0.87×10-6/°C was recommended. Key words:Bond strength, coefficient of thermal expansion, zirconia.

Zirconia toughened mica glass ceramics for dental restorations

OBJECTIVE

The objective of the present study is to understand the role of yttria stabilized zirconia (YSZ) in achieving the desired spectrum of clinically relevant mechanical properties (hardness, elastic modulus, fracture toughness and brittleness index) and chemical solubility of mica glass ceramics.

METHODS

The glass-zirconia mixtures with varying amounts of YSZ (0, 5, 10, 15 and 20wt.%) were ball milled, compacted and sintered to obtain pellets of glass ceramic-YSZ composites. Phase analysis was carried out using X-ray diffraction and microstructural characterization with SEM revealed the crystal morphology of the composites. Mechanical properties such as Vickers hardness, elastic modulus, indentation fracture toughness and chemical solubility were assessed.

RESULTS

Phase analysis of sintered pellets of glass ceramic-YSZ composites revealed the characteristic peaks of fluorophlogopite (FPP) and tetragonal zirconia. Microstructural investigation showed plate and lath-like interlocking mica crystals with embedded zirconia. Vickers hardness of 9.2GPa, elastic modulus of 125GPa, indentation toughness of 3.6MPa·m^1/2, and chemical solubility of 30μg/cm² (well below the permissible limit) were recorded with mica glass ceramics containing 20wt.% YSZ.

SIGNIFICANCE

An increase in hardness and toughness of the glass ceramic-YSZ composites with no compromise on their brittleness index and chemical solubility has been observed. Such spectrum of properties can be utilised for developing a machinable ceramic for low stress bearing inlays, onlays and veneers.

In vitro evaluation of the polishing effect and optical properties of monolithic zirconia

STATEMENT OF PROBLEM

The relationship between surface roughness and the optical characteristics of zirconia prostheses may be affected by the type of shaded block.

PURPOSE

The purpose of this in vitro study was to investigate changes in surface roughness and brightness of monolithic zirconia blocks of different shades after polishing.

MATERIAL AND METHODS

The surface roughness averages of 3 different kinds of shaded zirconia blocks (Zenostarof T0 [T0], Zenostar sun [Ts], and Zenostar sun chroma [Tsc]) were compared after surface polishing. Fifteen specimens of differing thicknesses were produced per block. (1 mm and 3 mm). Surface morphology and compositions were analyzed by using filed emission scanning electron microscopy (FE-SEM) and energy dispersive spectrometry. A 1-way ANOVA and the post hoc Scheffé test were performed (α=.05). The correlations between surface roughness and brightness were determined using the Pearson correlation analysis (α=.01).

RESULTS

After phased polishing, Ts had the highest average roughness, followed by T0 and then Tsc. A statistically significant difference in roughness was observed between Ts and Tsc (P<.05). Ts exhibited multiple distinct layers in the FE-SEM image. Carbon was detected in the Ts specimens only. Brightness was highest in T0, followed by Ts and then Tsc. A positive correlation was observed between brightness and surface roughness for all specimens (P<.01). This correlation was stronger in the thicker specimens.

CONCLUSIONS

The results of this study suggest that polishing affects monolithic zirconia differently depending on shade. The polishing of monolithic zirconia reduces both surface roughness and brightness. The optical properties of monolithic zirconia vary by thickness and can be opaque or translucent.

Anterosuperior rehabilitation with metal-free fixed prosthesis based on zirconia

The loss of upper front dental elements causes functional and psychosocial problems to the affected individuals. In this case report, the treatment planning considered hard and soft tissue loss for a complex fixed partial denture (FPD) rehabilitation. The six-element, all-ceramic FPD was manufactured using a computer-aided design/computer-aided manufacturing system with zirconia framework, veneered with leucite-reinforced ceramic. Ceramic artificial gum was also produced to guarantee tooth-facial proportions as well as lip support, promoting both esthetics and phonetics. The material's mechanical properties allowed for the coupling of the esthetic and mechanical requirements, proving an alternative to the well-established metal-ceramic technology, optimizing biomimetic. One of the endodontic-treated abutment teeth required a radicular retainer with cast metal post, but because of the opacity of zirconia, the esthetics of the prosthesis was not compromised. The low silica content of high resistance ceramics such as zirconia hampers the adhesive cementation, with numerous studies advocating for different cementation protocols, with no clear scientific consensus so far. In the present case, the internal surface of the FPD was initially blasted with aluminum oxide, followed by the application of a universal adhesive system containing 10-methacryloyloxydecyl dihydrogen phosphate. Finally, cementation to the dental structure was conducted with dual-cure self-adhesive resin cement.

A Three-Year Retrospective Study on Survival of Ceramic-Veneered Zirconia (Y-TZP) Fixed Dental Prostheses Performed in Private Practices

Objectives

The aim of this retrospective study was to evaluate the three-year clinical outcome for ceramic-veneered zirconia fixed dental prostheses (FDPs).

Methods

All patients who were treated with ceramic-veneered zirconia FDPs, in three private practices in Sweden, during the period June 2003 to April 2007 were included. Case records from 151 patients, treated with a total of 184 zirconia FDPs (692 units), were analysed for clinical data. All complications noted in the charts were registered and compared to definitions for success and survival and statistical analysis was performed using the Kaplan-Meier method and a Cox regression model.

Results

In total, 32 FDPs in 31 patients experienced some type of complication (17.4% of FDPs, 20.5% of patients). Core fractures occurred in two (1.1%) FDPs. Two (1.1%) FDPs or 0.6% of units showed adhesive veneer fractures. Cohesive veneer fractures occurred in 10 (5.4%) FDPs (1.6% of units). The three-year cumulative success and survival rates (CSR) were 82.3% and 95.2%, respectively.

Conclusions

Ceramic-veneered zirconia is a promising alternative to metal-ceramic FDPs, even in the posterior area. However, the higher survival rate of metal-ceramic FDPs should be noted and both dentists and patients must be aware of the risks of complications.