Influence of the ferrule effect on the failure of fiber-reinforced composite post-and-core restorations: A systematic review and meta-analysis

Clinical and laboratorial performance of rehabilitation of endodontically treated teeth: A systematic review

OBJECTIVE

This systematic review aimed to analyze the clinical (survival rate, failure risk, or fracture) and laboratory performance (fracture mode or failure) of rehabilitations of endodontically treated teeth, with and without posts.

MATERIALS AND METHODS

A systematic search was conducted in the Pubmed, Scopus, Web of Science, Embase, Cochrane Library, and OpenGrey databases up to March 2023, according to PRISMA guidelines. In vitro and clinical studies that compared the clinical and laboratory performance of endodontically treated teeth with and without intraradicular posts were included. Studies selection, data extraction, and risk of bias analysis were performed.

RESULTS

Thirty-one in vitro and 7 clinical studies were included. For in vitro studies, fiberglass post (n = 24) was the most mentioned. The follow-up time of the clinical studies ranged from 1 to 17 years, with the fiber-reinforced composite post (n = 3) being the most evaluated, and only failure risk proved to be more favorable for using intraradicular posts.

CONCLUSION

Rehabilitations of endodontically treated teeth with and without intraradicular retainers showed no difference in fracture resistance and failure mode, evaluated by in vitro studies. Clinical studies showed no difference in survival rate, but failure risk proved to be more favorable for the use of posts.

CLINICAL SIGNIFICANCE

This analysis revealed significant variability between results, however, most laboratory and clinical studies revealed no difference with using the post. Furthermore, it is important to emphasize the need to evaluate the coronary remnant and the general characteristics of the tooth in each situation.

The effect of ferrule and core material on fracture resistance of endodontically treated anterior teeth restored with ceramic crowns after artificial aging

OBJECTIVES

To assess the influence of ferrule and core type on the fracture strength of endodontically treated anterior teeth (ETAT) and identify the failure mode type and distribution across different core types and ferrule conditions.

METHODS

Sixty extracted human central incisors were endodontically treated, decoronated and divided into two main groups (F=with ferrule, NF=no ferrule). Each main group was further subdivided into three subgroups according to the core material used: direct composite cores (DC), Ribbond fibre-reinforced composite cores (RIB-DC), and glass fibre post (GFP) with direct composite cores (GFP-DC). All specimens received E.max crowns and underwent thermal cycling and cyclic loading. Subsequently, the fracture resistance was tested with static loads applied to the crown restoration. Two-Way ANOVA and Chi square tests identified significant differences among the groups (p < 0.05).

RESULTS

The means and standard deviations (SD) of fracture loads in Newtons (N) for specimens in the F subgroups were RIB-DC: 465.0 (104.20), GFP-DC: 367.6 (79.59), DC: 275.8 (68.48), and in NF subgroups were RIB-DC: 110.8 (24.33), GFP-DC: 95.6 (25.47), DC: 67.4 (7.46). Specimens with ferrule yielded significantly higher fracture loads than those without ferrule (p = 0.0054). In the F groups, fracture loads of specimens with RIB-DC cores were significantly higher than those with GFP-DC (p = 0.0019) and those with DC (p = 0.0001). Moreover, fracture loads for the GFP-DC were significantly higher than those for the DC (p = 0.0026). The GFP-DC specimens showed the highest incidence of catastrophic failures (p = 0.0420).

CONCLUSIONS

Using fibre-reinforced composite (FRC) cores significantly increased fracture resistance in ETAT with ferrule. The failure modes repairable and possibly repairable were dominant in most specimens.

CLINICAL SIGNIFICANCE

When restoring ETAT with insufficient coronal tooth structure, preserving 2 mm of tooth structure ferrule and preparing cores with FRC can increase fracture resistance and reduce the incidence of non-repairable catastrophic fractures of teeth.

Restoration of teeth lacking complete ferrules using cast precious metal alloy post-and-cores and knife-edged crowns: A retrospective clinical study

STATEMENT OF PROBLEM

While the presence of a ferrule has been reported to be essential for post-and-core restorations, many extensively damaged teeth lack complete ferrules. The outcome of post-and-core restorations for these teeth remains uncertain.

PURPOSE

The purpose of this retrospective clinical study was to assess the outcome of cast alloy post-and-cores and knife-edged crowns for the restoration of teeth lacking complete ferrules.

MATERIAL AND METHODS

A total of 106 participants with endodontically treated teeth with 2 or fewer walls with ferrules who had received cast precious metal alloy post-and-cores along with knife-edged crowns between 2013 and 2022 were recalled for a clinical examination. The minimum follow-up time was 5 months after restoration, and restoration failure and the periodontal status difference between restored teeth and reference teeth were determined. Kaplan-Meier analysis was performed to obtain success curves. The influence of age, sex, jaw position, tooth type, and antagonistic dentition upon the success function was analyzed with the log-rank or Breslow test (α=.05).

RESULTS

A total of 100 participants with 130 restorations were studied. The success rate of the restorations was 93.85% in a mean ±standard deviation period of 48.3 ±26.1 months. The estimated 5-year cumulative success probability was 91.61%. No significant effect on the success of restorations was found regarding age, sex, jaw position, tooth type, or antagonistic dentition (P>.05). The main failure types were post debonding, root fracture, and apical periodontitis. No statistical difference in tooth mobility (Z=-1.265, P=.206) was found between the restored and the reference teeth, but the plaque index and calculus index of the restored teeth were significantly lower than of the reference teeth (Z=-7.216, P<.001; Z=-7.044, P<.001). Teeth that had received cast post-and-cores and knife-edged crowns were found to have no significant correlation with periodontal disease (χ²=1.131, P=.288) or bleeding on probing (χ²=3.436, P=.064).

CONCLUSIONS

The clinical outcomes for the restoration of teeth with 2 or fewer walls with ferrules using cast precious metal alloy post-and-cores and knife-edged crowns were favorable, exhibiting a high 5-year cumulative success probability and no increased periodontal health risk.

Biomechanical impact of labiolingual diameter on endodontically treated anterior teeth with crown restoration under occlusal loading

OBJECTIVE

To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and biomechanical safety under occlusal loading.

METHODOLOGY

Three-dimensional finite element models were generated for maxillary central incisors with all-ceramic crown restorations. The labiolingual diameters of the tooth, defined as the horizontal distance between the protrusion of the labial and lingual surfaces, were changed as follows: (D1) 6.85 mm, (D2) 6.35 mm, and (D3) 5.85 mm. The model was constructed as follows: (S0) vital pulp tooth; (S1) ET tooth; (S2) ET tooth with a 2 mm ferrule, restored with a fiber post and composite resin core; (S3) ET tooth without a ferrule, restored with a fiber post and composite resin core. A total of 12 models were developed. In total, two force loads (100 N) were applied to the crown's incisal edge and palatal surface at a 45° oblique angle to the longitudinal axis of the teeth. The Von Mises stress distribution and maximum stress of the models were analyzed.

RESULTS

Regardless of the loading location, stress concentration and maximum stress (34.07~66.78MPa) in all models occurred in the labial cervical 1/3 of each root. Both labiolingual diameter and construction influenced the maximum stress of the residual tooth tissue, with the impact of the labiolingual diameter being greater. A reduction in labiolingual diameter led to increased maximum stress throughout the tooth. The ferrule reduced the maximum stress of the core of S2 models (7.15~10.69 MPa), which is lower compared with that of S3 models (19.45~43.67 MPa).

CONCLUSION

The labiolingual diameter exerts a greater impact on the biomechanical characteristics of ET anterior teeth with crown restoration, surpassing the influence of the construction. The ferrule can reduce the maximum stress of the core and maintain the uniformity of stress distribution.

Factors influencing the clinical performance of the restoration of endodontically treated teeth: An assessment of systematic reviews of clinical studies

STATEMENT OF PROBLEM

How best to restore endodontically treated teeth is still unclear because many types of material and techniques are involved.

PURPOSE

The purpose of this overview of systematic reviews of clinical studies was to assess the available evidence-based literature on the influence of associated clinical factors on the clinical performance (survival, failure rate, or success) of restored endodontically treated teeth.

MATERIAL AND METHODS

PubMed, Scopus, and Web of Science were searched from inception until September 27, 2021, to identify systematic reviews. Two reviewers independently screened titles, abstracts, and full-text articles, and each reviewer extracted the data of half of the included studies. A single reviewer with an independent verifier completed the quality appraisal. A descriptive analysis of the collected data was made.

RESULTS

A total of 36 systematic reviews fulfilled the inclusion criteria. The factors most assessed were the type of coronal restorative technique (n=22) and type of post (n=22). The results indicated that metal and fiber posts seem to present similar clinical performance, 1-piece endodontic crowns could be a suitable restorative option, there is no evidence to confirm whether single crowns are better or worse than direct restoration, the maintenance of the coronal structure is a fundamental factor, and the ferrule effect is still a controversial topic. Most of the studies (n=30, 81%) presented a final Grading of Recommendations, Assessment, Development and Evaluations (GRADE) rating of "critically low."

CONCLUSIONS

The post type does not appear to influence the clinical performance of restored endodontically treated teeth. However, conclusive evidence to suggest how different materials or techniques for restoring coronal tooth structure affect the clinical performance of such restorations, as well as the impact of the ferrule effect, is still lacking.

Treatment planning algorithm for patients with a terminal dentition

This article discusses the variables that affect the diagnostic process in patients with a compromised dentition and addresses the clinical decision of whether to extract or maintain teeth. A decision tree algorithm is proposed to guide clinicians in planning complete arch rehabilitations.

Comparative Analysis of the Mechanical Properties and Biocompatibility between CAD/CAM and Conventional Polymers Applied in Prosthetic Dentistry

Modern media often portray CAD/CAM technology as widely utilized in the fabrication of dental prosthetics. This study presents a comparative analysis of the mechanical properties and biocompatibility of CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) polymers and conventional polymers commonly utilized in prosthetic dentistry. With the increasing adoption of CAD/CAM technology in dental laboratories and practices, understanding the differences in material properties is crucial for informed decision-making in prosthodontic treatment planning. Through a narrative review of the literature and empirical data, this study evaluates the mechanical strength, durability, esthetics, and biocompatibility of CAD/CAM polymers in comparison to traditional polymers. Furthermore, it examines the implications of these findings on the clinical outcomes and long-term success of prosthetic restorations. The results provide valuable insights into the advantages and limitations of CAD/CAM polymers, informing clinicians and researchers about their suitability for various dental prosthetic applications. This study underscores the considerable advantages of CAD/CAM polymers over conventional ones in terms of mechanical properties, biocompatibility, and esthetics for prosthetic dentistry. CAD/CAM technology offers improved mechanical strength and durability, potentially enhancing the long-term performance of dental prosthetics, while the biocompatibility of these polymers makes them suitable for a broad patient demographic, reducing the risk of adverse reactions. The practical implications of these findings for dental technicians and dentists are significant, as understanding these material differences enables tailored treatment planning to meet individual patient needs and preferences. Integration of CAD/CAM technology into dental practices can lead to more predictable outcomes and heightened patient satisfaction with prosthetic restorations.

Single crown vs. composite for glass fiber post-retained restorations: An 8-year randomized clinical trial

OBJECTIVES

This study aimed to compare the success and survival rates of metal-ceramic crowns and composite resin restorations applied in root filled teeth that received a glass fiber post.

METHODS

A prospective, randomized controlled trial, with equivalent parallel groups was designed. Eighty-two teeth were randomly allocated to the metal-ceramic or composite resin groups. Multivariate Cox regression analysis with shared frailty for patients and Kaplan-Meier curves were performed using success and survival rates (p<0.05).

RESULTS

Seventy-five post-retained restorations (34 metal-ceramic crowns and 41 composite restorations) in 62 patients were analyzed. The median follow-up was 8.1 years [IQR 4.0-9.9]. Twenty-seven failures were observed. Twenty-two failures (81.5 %) were observed in the composite resin group, of which six (27.3 %) were not repairable. Five failures (18.5 %) were observed in the metal-ceramic crown group, of which three (66.6 %) were non-repairable. The cumulative success rate at 8 years was 85.0 % for crowns (AFR=1.31 %) and 43.2 % for composite resins (AFR=6.58 %), while the survival rate was 93.8 % for crowns (AFR=0.52 %) and 97.6 % for composite resins (AFR=0.20 %). Considering the success rates, adjusted multivariate Cox regression showed that composite resin had a Hazard Ratio of 5.07 (95 %CI, 1.99-12.89) greater than the metal-ceramic crown. No significant difference in the failure risk was observed when the survival rates were considered (HR=0.38, 95 %CI (0.10 - 1.44), p = 0.156). Co-variables did not affect the success and survival rates (p>0.05).

CONCLUSIONS

Metal-ceramic crowns showed a higher success rate than composite restorations. The survival rates were similar, but composite restorations presented a higher need for repairs.

CLINICAL SIGNIFICANCE

Post-retained composite restorations may need more reinterventions during the lifecycle, although more preservation of sound tooth structure is expected with a large restoration of resin post-and-core. These aspects have to be discussed with the patient for decision-making planning.

Effect of a circumferential ferrule on the survival and success of endodontically treated teeth restored with fiber posts: A systematic review and meta-analysis

STATEMENT OF PROBLEM

The success of endodontically treated teeth (ETT) is influenced by factors that include the use of prefabricated glass fiber posts. A consideration for success is the presence of a circumferential ferrule, but systematic reviews and meta-analyses are lacking.

PURPOSE

The purpose of this systematic review and meta-analysis was to assess the impact of the presence or absence of a circumferential ferrule on the survival and success rates of ETT restored with prefabricated fiber posts.

MATERIAL AND METHODS

Adhering to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, a comprehensive search of the major scientific literature databases was conducted. Eligible studies included randomized clinical trials and prospective cohort studies with a minimum 6-month follow-up, focusing on ETT restored with fiber posts either with or without a uniform circumferential ferrule. Relative risks (RRs) and 95% confidence intervals (CIs) were calculated to compare outcomes. The degree of variability among studies was assessed using the chi-squared test (α=.05).

RESULTS

Of 3731 identified records, 8 were eligible for inclusion. Direct analysis of success rates (2 studies, 123 teeth) showed a significant increase in success when a uniform circumferential ferrule was present (RR=1.28, 95% CI: 1.06, 1.54, P<.05). However, indirect analysis of survival and success rates (8 studies, 407 teeth) indicated no significant differences in outcomes between the ferrule and no ferrule groups (P>.05).

CONCLUSIONS

The results of this systematic review and meta-analysis determined that a uniform circumferential ferrule had a positive effect on the success rates of ETT restored with prefabricated fiber posts. However, further high-quality studies are required to provide more robust evidence and to allow potential confounding factors to be considered.

The impact of extended pulp chamber preparations on the clinical performance of endocrowns in Indian patients: A 1-year observational study

Purpose

The limitations of foundation restorations have been reduced with the advent of endocrowns. Despite their success, the extent of endocrowns tooth preparation into the pulp chamber has not been fully explored in the literature. The study aimed to evaluate the clinical performance of endocrowns with 5 mm extended pulp chamber tooth preparations in Indian patients over a 1- year period using modified USPHS criteria.

Methods

The observational study recruited 36 participants with definite criteria. Ceramic crown was planned for all the participants. Conventional endocrown tooth preparation was made with 5 mm pulpal extension. Clinical assessments were made at 0-, 6- and 12-months intervals using modified USPHS criteria. The data was statistically analyzed using Friedman test and Wilcoxon signed rank test.

Results

One patient (2.8%) experienced loss of retention, marginal adaptation, and loss of anatomical form during 1-year follow up period. The majority of the participants (97.3%) reported no discomfort and high satisfaction. (P < .05) No opposing tooth wear was observed at 0- and 6-months. The results showed statistical significance in the parameters of retention, marginal adaptation, loss of anatomical form, and patient satisfaction. (P < .05).

Conclusion

The clinical performance of endocrowns with extended pulp chamber preparation was satisfactory for a period of 12 months.

Evaluation of Poly(etheretherketone) Post's Mechanical Strength in Comparison with Three Metal-Free Biomaterials: An In Vitro Study

The thinking about metallic replacement has begun in a global context of reducing metallic alloys' use in odontology. Among the materials proposed for their replacement, poly(etheretherketone) may present interesting properties, especially in removable dentures' frames. The purpose of this study is to evaluate fracture resistance of PEEK posts-and-cores compared to non-metallic CAD/CAM materials and fiber glass posts. Forty extracted maxillary central incisors were prepared to receive posts. Samples were divided into four groups depending on whether they had been reconstructed with LuxaCam® PEEK, Enamic®, Numerys GF® or LuxaPost®. Samples were submitted to an oblique compressive test and results were statistically analyzed with ANOVA and Student's tests (or non-parametric tests depending on the conditions). Glass fiber posts and Numerys GF® reveal a significantly higher fracture resistance than LuxaCam® PEEK and Enamic®. No exclusively dental fracture has been noted for the Enamic group, which significantly distinguishes these samples from the three other groups. In our study, it appears that the conception of posts and cores with hybrid ceramic never conducts to a unique tooth fracture. By weighting the results according to the materials used, our data, obtained for the first time on this type of PEEK block, cannot confirm the possibility of using PEEK for inlay-core conception, excepted for specific cases when the material is considered in a patient presenting allergies or systemic disease contraindicating resin or metal.

The Effect of Remaining Coronal Tissue Height on the Fracture Strength of Over-Flared Endodontically Treated Central Incisors Restored Using a Multipost Approach

Objectives

This study aimed to examine the effect of remaining coronal tissue height on the fracture strength of over-flared endodontically treated central incisors restored with multiple prefabricated fiberglass posts using the multipost approach.

Materials and Methods

A total of 40 human central maxillary incisors were examined in this study. The samples were assigned to five groups (n = 8) based on the height of the remaining coronal tissue: with no remaining coronal tissue, 1-mm coronal tissue height (CTH1), 2-mm coronal tissue height, 3-mm coronal tissue height (CTH3), and one intact tooth (IT) group. Following endodontic treatment of an over-flared canal, the postspace depth was 10 mm, and the residual dentin thickness was 1 mm. Two prefabricated fiberglass posts were cemented into the root canal, adopting a multipost approach. The static load was applied at 0.5 mm/min and 135° concerning the tooth's longitudinal axis until a fracture occurred. One-way analysis of variance and the post hoc Tukey's test were performed to analyze the data at a significance level of p < 0.05.

Results

The maximum fracture strength was recorded for IT (control group), while the minimum fracture strength was found for teeth with a coronal tissue height of 1 mm. The differences between IT group and other groups (p < 0.05), as well as the differences between the group with CTH3 and groups without coronal tissue and CTH1, were significant.

Conclusion

In sum, an increase in the height of the remaining coronal tissue (≥3 mm) significantly increased the fracture strength of over-flared endodontically treated central incisors after restoration with prefabricated fiberglass posts by adopting a multipost approach.

Microcomputed tomography analysis of the radicular residual dentin thickness in mandibular second molars after virtual fiber post placement: Identification of danger zones

STATEMENT OF PROBLEM

Mandibular second molars have variable root, pulp chamber floor, and radicular groove morphologies, potentially affecting residual dentin thickness and post placement suitability. However, an identification of the danger zones is lacking.

PURPOSE

The purpose of this in vitro study was to investigate the residual dentin thickness in the danger zone of mandibular second molars after virtual fiber post placement by using a simulation method based on microcomputed tomography (μCT).

MATERIAL AND METHODS

A total of 84 extracted mandibular second molars were scanned using μCT and classified according to root morphology (separate or fused) and pulp chamber floor morphologies (C-shaped, non-C-shaped, or no pulp chamber floor). Fused-root mandibular second molars were further classified based on the radicular groove type (V-, U-, or Ω-shaped). All specimens were accessed, instrumented, and rescanned with μCT. Two types of commercial fiber posts were also scanned. Clinical fiber post placement was simulated in all prepared canals by using a multifunctional software program. The minimum residual dentin thickness of each root canal was measured and analyzed by using nonparametric tests to identify the danger zone. Perforation rates were calculated and recorded.

RESULTS

Larger fiber posts decreased minimum residual dentin thickness (P<.05) and increased perforation rate. In regard to mandibular second molars with separate roots, the distal root canal exhibited a significantly higher minimum residual dentin thickness than the mesiobuccal and mesiolingual root canals (P<.05). However, no significant difference in minimum residual dentin thickness was found between the different canals in fused-root mandibular second molars with C-shaped pulp chamber floors (P<.05). Fused-root mandibular second molars with Ω-shaped radicular grooves had a lower minimum residual dentin thickness than those with V-shaped radicular grooves (P<.05) and demonstrated the highest perforation rate.

CONCLUSIONS

The morphologies of the root, pulp chamber floor, and radicular groove were correlated with residual dentin thickness distribution in mandibular second molars after fiber post placement. A comprehensive understanding of mandibular second molar morphology is essential for determining the suitability of post-and-core crown restorations after endodontic treatment.

Survival rate and treatment success of glass fiber posts cemented with two adhesive cementation strategies after up to 106 months: a randomized clinical trial

OBJECTIVES

The objective of this study is to evaluate the longevity of two fiber post cementation strategies in a prospective, multicenter, non-inferiority, double-blind randomized controlled trial.

METHODS

A total of 152 teeth, with adequate endodontic treatment and loss of coronal structure and bilateral simultaneous posterior occlusal contacts, were randomly allocated to receive glass fiber posts cemented with a conventional cementation strategy (CRC group: adhesive system + resin cement) (Adper Single Bond + RelyX ARC; 3 M-ESPE) or a self-adhesive cementation strategy (SRC group: self-adhesive resin cement; RelyX U100/U200; 3 M-ESPE). The patients were recalled annually for clinical and radiographical evaluation with a 93% recall rate (142 teeth, with 74 at CR groups and 68 at SRC group). The primary outcome was survival rate, considering the fiber post debonding (loss of retention). The secondary outcome included the success rate of the prosthetic treatment with crown debonding, post fracture, and tooth loss (not related to post failure). Both outcomes were evaluated annually. The Kaplan-Meier method and Cox regression with 95% confidence interval were used for the statistical analysis.

RESULTS

For the primary outcome (failures directly related to fiber posts cementation strategy), there were 4 fiber post debondings (2 per group), 8 root fractures (3 for SRC group and 5 for CRC group), and one mixed failure (debonding combined with root fracture for CRC), with both strategies presenting similar survival rates (p = 0.331), with 88.9% for the CRC group and 90.9% for the SRC group. For the secondary outcome (failures not related to fiber post cementation strategies), there were 8 crown debondings, 3 post fractures, and 3 tooth losses, with no statistically difference between groups (p = 0.701), with 77% for SRC and 82% for CRC.

CONCLUSION

Fiber post cementation strategies with conventional or self-adhesive resin cement presents similar tooth survival and success rates.

TRIAL REGISTRATION

NCT01461239 CLINICAL RELEVANCE: Both adhesive cementation strategies led to high survival and success rates and are indicated for fiber post cementation, even after a long follow-up period (up to 106 months).

Evidence-based fact checking for selective procedures in restorative dentistry

OBJECTIVES

Similar to other dental specialties, there are many clinical procedures in restorative dentistry that may or may not be supported by good evidence. Thus, the effectiveness of these procedures is uncertain. The aim of this paper is to reduce this knowledge gap by critically inspecting selective procedures in restorative dentistry and exploring if these well-established or widely advocated treatment modalities are necessary for improving treatment outcomes based on the best available evidence.

MATERIALS AND METHODS

A MEDLINE search was conducted to identify research on selective procedures while focusing on clinical trials and systematic reviews. Due to their practical relevance in the decision-making process, cost-effectiveness analyses were also included.

RESULTS

Mixed results were identified regarding the included interventions. Some procedures had adequate evidence supporting them while others were mostly based on beliefs.

CONCLUSIONS

A critical review of the available literature indicates that some common restorative procedures lack adequate support from high-quality research evidence.

CLINICAL RELEVANCE

This paper attempts to highlight the need to critically examine the scientific validity of traditional knowledge and techniques through the context of current research evidence. This will not only help generate consensus between educators, clinicians, and researchers regarding restorative procedures but will also lead to improved patient care and outcomes.

Influence of alveolar bone height on the biomechanical behavior of roots restored with custom-made posts-and-cores

OBJETIVE

This study evaluated the influence of alveolar bone height and post type on compressive force resistance, fracture pattern, and stress distribution in endodontically treated teeth.

MATERIALS AND METHODS

Bovine roots were endodontically treated and divided into eight groups (n = 10) according to alveolar bone height (normal alveolar bone and alveolar bone loss - 2 and 5 mm from the margin of the crown, respectively) and post type (prefabricated glass fiber post, anatomic glass fiber post, customized milled glass fiber post-and-core and customized milled polyetheretherketone (PEEK) post-and-core). Mechanical fatigue was simulated (300.000 cycles/50 N/1.2 Hz). Compression force resistance (N) was analyzed by two-way ANOVA and Tukey test (α = 0.05). Fracture patterns were described as percentages. Stress distribution was analyzed by finite element analysis.

RESULTS

Significant diferences were found for alveolar bone height (P < 0.0001): normal alveolar bone groups showed higher mean values of compression force resistance compared to alveolar bone loss groups, while no significant differences were found for post type (P = 0.4551), and there was no double interaction between them (P = 0.5837). Reparable fractures were more predominant in normal alveolar bone groups, especially in the milled glass fiber and PEEK post-and-core groups. Stress distribution was similar in groups with prefabricated glass fiber posts and milled PEEK posts-and-cores, and the alveolar bone loss condition significantly increased stress concentration and strain values, mainly on apical dentin.

CONCLUSIONS

Alveolar bone loss due to physiological aging and/or periodontal disease may lead to increased risk of restored tooth failure, although milled glass fiber and PEEK posts-and-cores provide more reparable fractures.

CLINICAL SIGNIFICANCE

Custom-made glass fiber and PEEK post-and-cores are interesting options, since they enable clinicians to work with a single-body post-and-core system that avoid several materials interfaces and fits well in the root canal provided promising results to improve the failure behavior of restored roots, as they offer more reparable fractures even in situations of alveolar bone loss.

CORE TRAINING IMPACTS RUNNING ATHLETES’ PHYSICAL CAPACITY

ABSTRACT Introduction: Core strength training focuses mainly on the muscle group and neuromuscular system of the central area of the human body to gain strength and stability for complex movements. Studies have reported the effect of core training on high-capacity athletes, but there is still a gap regarding the impacts on physical capacity in running athletes. Objective: To study the effects of strength training on athletes’ core and the direct impacts on running quality. Methods: Athletes of the men’s running team at the athletic training center of the Institute of Physical Education were core strength trained for 10 to 12 weeks. After the period, physical tests, according to predetermined protocols. The data were compared before, after the intervention, and after statistical treatment, and the findings were discussed according to the scientific literature. Results: After 12 weeks of training, among the five sports skills, there was only a significant difference before and after training of body lateral flexion (right side) (P<0.05), and there was no significant difference before and after training of the other four sport skills (P > 0.05). Conclusions: Through the static and dynamic exercises of core strength training, we can effectively improve the proprioception intervention in body movement so that runners can more accurately control their joints and muscles, ensuring movement and postural accuracy. Level of evidence II; Therapeutic studies - investigation of treatment outcomes.

Probability of survival and failure mode of endodontically treated incisors without ferrule restored with CAD/CAM fiber-reinforced composite (FRC) post-cores

PURPOSE

This study evaluated the probability of survival and failure mode of endodontically treated incisors without ferrule restored with CAD/CAM FRC post-cores.

METHODS

Root canals of bovine incisors were treated, leaving post preparations of ∼10 mm. Teeth were allocated into three groups: (i) cast metal post-core, (ii) FRC prefabricated post with a direct resin core build-up, and (iii) CAD/CAM FRC post-core. Posts and zirconia crowns were cemented using resin cement. Specimens were subjected to step-stress accelerated-life fatigue testing in water. Use level probability Weibull curves, probability of survival for a mission of 100,000 cycles at 25, 50, and 100 N, Weibull modulus, and characteristic strength were calculated and plotted. Failure mode was examined under a stereomicroscope.

RESULTS

Restored incisors demonstrated high probability of survival (93-100%) for missions estimated at 25 and 50 N, irrespective of post-core foundation. At 100 N, incisors restored with metal posts presented significantly higher probability of survival (99%) relative to CAD/CAM posts (79%), whereas FRC groups demonstrated no significant difference. Weibull analysis indicated no significant difference on the Weibull modulus (m = 3.38-5.92). Incisors reconstructed with metal post-cores (431 N) presented significantly higher characteristic strength relative to prefabricated (200 N) and CAD/CAM (202 N) FRC post-cores. While post fracture was the chief failure mode for prefabricated and CAD/CAM FRC post-cores, post and/or root fracture were the main event for metal post-cores.

CONCLUSION

Endodontically treated incisors without ferrule restored with CAD/CAM FRC post-cores presented promising probability of survival for loads compatible with anterior masticatory forces and favorable failure modes.

Compressive Strength and Porosity Evaluation of Innovative Bidirectional Spiral Winding Fiber Reinforced Composites

The aim of this in vitro study was to investigate the compressive strength and the bulk porosity of a bidirectional (bFRC) and an experimental bidirectional spiral winding reinforced fiber composite (bswFRC). Cylindrical-shape specimens were prepared for each material group and processed for the evaluation of compressive strength after different storage conditions (dry, 1 and 3 months) in distilled water at 37 °C. The specimens were also assessed for the degree of bulk porosity through X-ray tomography. A scanning electron microscope (SEM) was used to determine the fracture mode after a compressive strength test. Data were statistically analyzed using Two-Way Analysis of Variance (ANOVA). A significantly lower compressive strength was obtained in dry conditions, and after 1 month of water immersion, with the specimens created with bFRC compared to those made with bswFRC (p < 0.05). No significant difference (p > 0.05) was found between the two groups after 3 months of water immersion. However, the presence of water jeopardized significantly the compressive strength of bswFRC after water storage. The type of fracture was clearly different between the two groups; bswFRC showed a brutal fracture, whilst bFRC demonstrated a shear fracture. The bswFRC demonstrated higher pore volume density than bFRC. In conclusion, bswFRC is characterized by greater compressive strength compared to bFRC in dry conditions, but water-aging can significantly decrease the mechanical properties of such an innovative FRC. Therefore, both the novel bidirectional spiral winding reinforced fiber composites (bswFRC) and the bidirectional fiber reinforced composites (bFRC) might represent suitable materials for the production of post-and-core systems via CAD/CAM technology. These findings suggest that both FRC materials have the potential to strengthen the endodontically treated teeth.

Outcome of teeth restored with CAD/CAM zirconium dioxide post-cores: a retrospective study with a follow-up period of 3-6 years

Statement of problem

Computer aided design/computer aided manufacturing (CAD/CAM) zirconia post-cores is one of the options of post crown restoration materials due to their esthetic properties and superior mechanical strength. However, the clinical effect on aesthetics and strength properties is unclear due to the lack of results of their long-term follow-up.

Purpose

This retrospective clinical study aims to analyze the survival rate, clinical manifestations, and failure factors after CAD/CAM zirconia post-core restoration.

Material and methods

Clinical and radiographic examinations were performed on 342 patients with 400 teeth for 3–6 years postsurgical follow-up examination. The patients were all received CAD/CAM zirconia post-cores and all-ceramic crowns at the Department of Prosthodontics in the public hospital. The retrospective outcomes were conducted after zirconia post restoration, including survival rate by Kaplan–Meier analysis and findings of manifestations and failure factors. The effects of gender and dental position on survival rate were analyzed by Cox–Mantel Test.

Results

This study retrospectively evaluated 261 teeth from 229 patients with a 35% drop-out rate. The survival rate was 96.0%, and the success rate was 92.4%. According to the tooth position classification, the survival rate was 100% for 101 anterior teeth, 95.4% for 69 premolars, and 88.3% for 91 molars. According to gender, the survival rate of the male group was 92.3%, while that of the female group was 98.0%, with a significant difference (P < 0.01). The complications included crown fracture (1.9%) periapical inflammation (1.9%), crown debonding (1.1%), percussion abnormal (1.9%) and root fracture (0.8%).

Conclusions

Within the limitations of this retrospective study, it can be concluded that CAD/CAM zirconia post-cores are clinically promising. Compared with the posterior teeth, CAD/CAM zirconia post-cores are more suitable for anterior teeth.

A critical analysis of research methods and experimental models to study the load capacity and clinical behavior of the root filled teeth

The prognosis of root‐filled teeth depends not only on a successful root canal treatment but also on the restorative prognosis. This critical review discusses the advantages and limitations of various methodologies used to assess the load capacity or clinical survivability of root‐filled teeth and restorations. These methods include static loading, cyclic loading, finite element analysis and randomized clinical trials. In vitro research is valuable for preclinical screening of new dental materials or restorative modalities. It also can assist investigators or industry to decide whether further clinical trials are justified. It is important that these models present high precision and accuracy, be reproducible, and present adequate outcomes. Although in vitro models can reduce confounding by controlling important variables, the lack of clinical validation (accuracy) is a downside that has not been properly addressed. Most importantly, many in vitro studies did not explore the mechanisms of failure and their results are limited to rank different materials or treatment modalities according to the maximum load capacity. An extensive number of randomized clinical trials have also been published in the last years. These trials have provided valuable insight on the survivability of the root‐filled tooth answering numerous clinical questions. However, trials can also be affected by the selected outcome and by intrinsic and extrinsic biases. For example, selection bias, loss to follow‐up and confounding. In the clinical scenario, hypothesis‐based studies are preferred over observational and retrospective studies. It is recommended that hypothesis‐based studies minimize error and bias during the design phase.

Survival Rates of Endodontically Treated Posterior Teeth Restored with All-Ceramic Partial-Coverage Crowns: When Systematic Review Fails

Background: To determine the survival rates of endodontically treated posterior teeth (EDPT) restored with partial coverage all-ceramic crowns with or without the use of fiber posts. Methods: MEDLINE and Cochrane searches were conducted in order to identify Randomized Clinical Trials (RCTs) related to endodontically treated posterior teeth restored with partial coverage crowns. The search period was extended until February 2020 and only in vivo, human, and studies in the English language were included. A manual search was also conducted and additional articles, if found, were included in the database. Results: The initial search for the selected databases identified 495 studies, which were all screened for inclusion through titles, abstracts and full-text reading. Out of these 495 studies, only one article met the eligibility criteria and was included in this systematic review. Statistical analysis could not be performed. Conclusions: Only one RCT was identified in this systematic review. More clinical evidence is necessary to assess the survival rate of EDPT with partial-coverage crowns. This systematic review failed because it did not find scientific evidence to support the use of indirect bonded restorations on EDPT.

Metal vs fibre posts - which is clinically superior for the restoration of endodontically treated teeth?

Data sources Medline/PubMed, Web of Science, Scopus and Cochrane Library databases. Grey literature searches (OpenGrey, ProQuest databases), hand searches in the reference list of eligible studies and relevant journals.Study selection Randomised controlled trials (RCTs) and prospective clinical trials (PCTs) with direct comparisons between metal posts (MPs) and fibre posts (FPs). Trials contained a minimum of ten patients and endodontically treated permanent teeth that had received either single crowns or fixed partial dentures (bridges) and followed up for a minimum of one year. The primary outcome compared the difference in failure rates between FPs and MPs, with subgroup analysis comparing location (anterior/posterior), type of MP (cast post core/preformed MP) and most frequent modes of failure (debond/root fracture).Data extraction and synthesis Study selection, data collection and risk of bias assessments were completed independently by two reviewers. Disagreements were discussed with a third reviewer to reach a consensus. The risk of bias was evaluated using the Cochrane risk of bias tool (RCTs) or the ROBINS-I tool (PCTs). The quality of responses was assessed using the Grading of Recommendations Assessment, Development And Evaluation (GRADE) approach. The meta-analysis (MA) was performed using the Mantel-Haenszel method. Trial heterogeneity was assessed using random- and fixed-effects models. Inter-examiner agreement during the database search and study selection process was checked using the kappa statistic.Results After duplicates were removed, 1,026 articles were assessed and screened by title and abstract. Of these, 21 articles underwent full-text evaluation, with ten articles meeting the eligibility criteria. Eligible studies included six RCTs and four PCTs. A total of 844 endodontically treated teeth (ETT) were restored with intra-radicular posts in 704 participants. Four hundred and fifty-three ETT were restored with FPs and 391 with MPs. The mean age of participants was 42.7 (33.95-55.45) years, with a mean follow-up period of 50.95 (12-154) months. Most studies reported failures during the follow-up period, but the MA revealed no significant difference between FPs and MPs in terms of failure rates (P = 0.39; RR: 0.82 mm; CI: 0.52-1.29). Sub-analysis showed no difference in failure rates between anterior and posterior regions and no difference when comparing FPs to cast post and core vs prefabricated MPs. Root fractures and post debondings were the most common modes of failure, but within these failures, no difference was observed between FPs and MPs.Conclusions No evidence was identified for a difference in failure rates between FPs and MPs. This was independent of the type of MP and position within the arch. Reporting of RCTs and PCTs was variable and further high-quality studies are needed.

Influence of one-wall remaining coronal tooth with resin abutment and fiber post on static and dynamic fracture resistance

The objective of this study was to determine the influence of height and thickness of the one wall remaining coronal tooth structure on the fracture resistance of an endodontically treated root with resin abutment build-up using resin composite and fiber-reinforced resin composite post. Static and dynamic fracture tests were performed by placing the remaining tooth wall on the tensile side and applying loads at an angle of 30° from the tooth axis. Superior static fracture resistance was observed when the wall remaining on the tooth had a height and thickness greater than 1.0 mm. The dynamic fatigue test showed high loading capacity or fracture resistance in specimens with large height and thickness. The dynamic fatigue test showed the influence of the remaining tooth structure on fracture resistance clearly. In conclusion, the static and dynamic fracture resistances increased with the height and thickness of the one wall remaining tooth structure.

Effect of Cervical Lesions on Fracture Resistance and Failure Mode of Maxillary Central Incisors Restored with Fiber Posts and Complete Crowns

PURPOSE

To investigate the effect of a cervical cavity extending 1 mm apical to the cemento-enamel junction (CEJ) on fracture resistance and failure mode of maxillary central incisors that have been treated endodontically, present with complete and incomplete ferrules, and are restored with and without a fiber post.

METHODS AND MATERIALS

50 intact human maxillary central incisors were divided into five groups (n=10): CG (control group) 6-mm fer-rule height, no cervical cavity, and without post; (CO) 6-mm ferrule height without post, with a cervical cavity (access to root canal and cervical cavity restored with composite resin), cervical cavity; and post with ferrule heights of 1 mm (CP1), 2 mm (CP2), and 6 mm (CP6) restored with fiberglass post and composite resin core. After complete metal crowns were cemented on all specimens, they were subjected to thermal cycling (6000 cycles, 5°C/55°C), followed by immediate testing of fracture resistance. After failure, the specimens were sectioned buccolingually to evaluate and identify the mode of failure. The data were analyzed with an analysis of variance (ANOVA) and the Student-Newman-Keuls multiple comparison tests (α =0.05).

RESULTS

A 1-mm ferrule height (CP1) fracture resistance was significantly lower (531±125 N) compared to the 6-mm ferrule height (CP6) (769±175 N) (p<0.05). With respect to the groups with similar residual dentin, with and without a cervical cavity, CG (667±119 N) and CO (668±119 N), the presence of a post (CP6) increased the resistance to fracture, although no statistically significant difference was demonstrated. Partial decementation was observed in all specimens of CG and CP6, in nine of CP1 and CP2, and in three in CO. Root fractures occurred in 23 specimens. The root surface was exposed 2 mm below the CEJ to simulate bone level. Propagation of subosseous cracks occurred in four specimens in CG and CP2, in seven specimens in CP6, in two specimens in CP1, and in six specimens in CO. All were considered catastrophic failures.

CONCLUSIONS

Within the limitations of this study it is suggested that, when restoring an endodontically treated maxillary central incisor that has a cervical lesion and needs to be restored with a complete crown, a fiber post is cemented to improve fracture resistance.

Influence of remaining axial walls on of root filled teeth restored with a single crown and adhesively bonded fibre post: A systematic review and meta-analysis

OBJECTIVES

To synthesise evidence on structural failures and prevalence of post-treatment endodontic disease (PTD) in anterior and posterior root filled teeth with a single crown and adhesively bonded fibre post with regards to the number of axial walls.

DATA

An electronic search was performed, no language constraints or restriction on the year of publication were applied.

SOURCES

PubMed, Medline, Cochrane and Scopus on 13th of July 2021.

STUDY SELECTION

Clinical studies that reported the remaining number of axial walls for permanent anterior and posterior root filled teeth (RFT) restored with single crowns and adhesively bonded fibre posts with a minimum of 1 year follow-up were included. Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines [1] were used. The number of axial walls and the success/failures were analysed as follows: fibre post and/or core decementation, post and/or core fracture and post treatment endodontic disease, and root fracture.

CONCLUSIONS

A total of 811 studies were identified with 5 meeting the inclusion criteria. The two randomized controlled trials included had 'some concerns' as determined by the Cochrane risk-of-bias 2 tool while the Newcastle-Ottawa scale found low risk of bias for the remaining three studies. The random effects model for subgroup meta-analysis revealed failures for posterior RFT increased with decreasing numbers of remaining walls. Failures for 0 remaining walls were 23% (95% CI = 10% - 36%) and for one remaining wall 15% (CI: 3% -26%), irrespective of follow-up times. Fibre post debonding and PTD increased with decreasing numbers of walls. Relative & catastrophic failure of posterior teeth restored with a fibre post and single crown after root canal treatment increased with decreasing numbers of remaining axial walls.

CLINICAL SIGNIFICANCE

This synthesis is unique as it minimizes the presence of confounding factors by reviewing evidence of failures and post-treatment endodontic disease associated with teeth restored with single crowns. Therefore, it provides valuable predictive evidence of potential coronal restoration catastrophes and post-treatment endodontic disease associated with root filled teeth.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

The Scientific Investigation Committee of the American Academy of Restorative Dentistry offers this review of the 2020 professional literature in restorative dentistry to inform busy dentists regarding noteworthy scientific and clinical progress over the past year. Each member of the committee brings discipline-specific expertise to this work to cover this broad topic. Specific subject areas addressed include prosthodontics; periodontics, alveolar bone, and peri-implant tissues; implant dentistry; dental materials and therapeutics; occlusion and temporomandibular disorders (TMDs); sleep-related breathing disorders; oral medicine and oral and maxillofacial surgery; and dental caries and cariology. The authors focused their efforts on reporting information likely to influence day-to-day dental treatment decisions with a keen eye on future trends in the profession. With the tremendous volume of dentistry and related literature being published today, this review cannot possibly be comprehensive. The purpose is to update interested readers and provide important resource material for those interested in pursuing greater detail. It remains our intent to assist colleagues in navigating the extensive volume of important information being published annually. It is our hope that readers find this work useful in successfully managing the dental patients they encounter.

Is a fiber post better than a metal post for the restoration of endodontically treated teeth? A systematic review and meta-analysis

OBJECTIVE

To evaluate systematically the evidence about the failure rates of endodontically treated teeth (ETT) restored with intraradicular metal posts (MPs) or fiber posts (FPs).

DATA

The review protocol was registered on PROSPERO (CRD42020189792). Eligibility criteria included randomized clinical trials (RCT) and prospective clinical trials (PCT) that compared the failures between FP and MP restorations for ETT. Meta-analyses were conducted for failure rates using fixed- and random-effects models. Subgroup and funnel plot analyses were performed.

SOURCES

Four electronic databases (MEDLINE/PubMed, Web of Science, Scopus, and Cochrane Library), manual, and grey literature were screened by two researchers independently for articles published until November 2020 without language or time restrictions. For the analysis of the risk of bias, the Cochrane collaboration tool and ROBINS-I were used. The certainty of the evidence was evaluated using GRADE.

STUDY SELECTION

Ten studies were included. A total of 704 participants with a mean age of 42.7 years with a total of 844 ETT were restored using 453 FPs and 391 MPs. The FPs presented similar failures to that with MPs (P=0.39; risk ratio [RR]:0.82; 95% confidence interval [CI]: 0.52 to 1.29). Subgroup analysis showed no significant differences between the FPs and MPs for the anterior region (P=0.60; RR:0.88; [CI]: 0.54 to 1.42), posterior region (P=0.52; RR:1.18; [CI]: 0.71 to 1.98), root fracture (P=0.44; RR:0.78; [CI]: 0.41 to 1.49), and debonding (P=0.56; RR:1.27; [CI]: 0.57 to 2.80). Additionally, FP showed similar failures compared with those of cast (P=0.36; RR:0.63; [CI]: 0.23 to 1.72) and prefabricated MPs (P=0.68; RR:0.90; [CI]: 0.54 to 1.50). The RCT and PCT studies revealed a low risk of bias for most of the domains. However, the certainty of evidence was considered low.

CONCLUSION

No evidence of difference was observed for failure rates between FPs, and MPs, independent of region and different MPs used in ETT. However, further well-conducted clinical studies with high-quality evidence are encouraged.

CLINICAL SIGNIFICANCE

Our results indicate that both retainer posts can be considered an adequate alternative in restoring ETT. Therefore, the choice of post (fiber or metal) could be based on dentist preference or individual characteristics of the patient as the failure rates for different posts are similar.

CAD/CAM Milled Glass Fiber Posts: Adaptation and Mechanical Behavior in Flared Root Canals

This study aimed to evaluate the cementation and mechanical behavior of flared root canals restored with CAD/CAM milled glass fiber post-and-core systems. Sixty-six endodontically treated human canines with a flared root canal were divided into three different groups according to the type of post: GPF received prefabricated posts; GREL received relined glass fiber posts, and GMILLED received CAD/CAM milled glass fiber posts. Cementation was performed with self-adhesive resin cement. The samples were submitted to x-ray microcomputed tomography analysis for the analysis of voids and gaps. The roots were sectioned and submitted to the push-out bond strength test. The load-to-fracture was evaluated in post-and-core systems. GMILLED presented lower void and lower gap volumes when compared to GPF and GREL. On the load-to-fracture test, GREL presented statistically significant higher values than GMILLED. GPF values had no statistically significant difference from the two other groups. On the push-out bond strength test, GPF presented statistically significant lower values when compared to GREL and GMILLED. The most common failure pattern was between dentin and cement in all groups. CAD/CAM milled glass fiber post-and-core systems presented an enhanced adaptation of glass fiber posts to flared root canal systems. Their results were comparable to relined posts in bond strength, while load-to-fracture-results for GMILLED were lower than those for GPF.

Better Glass-fiber Post Preservation in Teeth with Ferrule When Subjected to Chewing

OBJECTIVES

To evaluate the influence of ferrule effect and mechanical fatigue aging on glass-fiber post push-out bond strength (PBS) to root-canal dentin at different root thirds of premolars.

METHODS AND MATERIALS

Thirty-two sound maxillary premolar teeth were collected, and randomly assigned to two experimental groups (n=16): 'Remaining Dentin Ferrule' (RDF) = coronal crown cut 2.0 mm above the cementoenamel junction (CEJ); 'Without Dentin Ferrule' (WDF) = coronal crown cut at the cemento-enamel junction. Teeth were endodontically treated, post spaces were prepared up to 10.0-mm depth from CEJ, and glass-fiber posts were cemented using a dual-cure self-adhesive composite cement. Standardized cores were built using a light-cure composite, upon which tooth cores were prepared using a 1.5-mm taper ogival-end diamond bur. Crowns were handmade using self-cure acrylic resin and cemented using the aforementioned composite cement. Half of the specimens were subjected to 1,200,000 cycles of mechanical fatigue in a chewing simulator (F = 'Fatigue'), while the other half were stored in distilled water at 37°C for 1 week (C = 'Control'). All specimens were horizontally sectioned into 1.0-mm thick slices prior to PBS test; the failure modes were assessed using stereomicroscopy and scanning electron microscopy (SEM). Data were analyzed for each root third using two-way analysis of variance (ANOVA) followed by Tukey HSD post-hoc test; frequency distribution was compared by Chi-square test (α=0.05) and post-hoc comparisons with Bonferroni.

RESULTS

The mean PBS in MPa (SD) were = RDF_F = 10.4 (2.9); WDF_F = 6.9 (1.7); RDF_C = 14.5 (2.7); WDF_C = 14.2 (2.9). Similar PBS were found for the root thirds. For all root thirds, significant differences were found for both the factors Dentin Ferrule and Fatigue, and their interaction (p<0.05). The lowest PBS was found for specimens without dentin ferrule subjected to chewing fatigue (p<0.001). Most failures occurred at the composite cement/dentin interface, followed by mixed and composite cement/glass-fiber post interfacial failures. There was a significant increase in mixed failures for the WDF_F group (p<0.001).

CONCLUSION

Absence of 2.0-mm remaining dentin ferrule in premolars resulted in a higher decrease of the glass-fiber posts' PBS to dentin after mechanical fatigue, irrespective of root third.

Direct Esthetic Composite Restorations in Anterior Teeth: Managing Symmetry Strategies

A novel procedure for symmetric and consistent layer thickness management in esthetic direct restoration of anterior teeth is presented. For the purpose of obtaining a satisfactory final outcome of an esthetic direct restoration, it is crucial to standardize either margin preparation design and dentin and enamel layer thickness. Leaving too much space for the final translucent layer may lead in fact to “low value—gray” restorations if not correctly managed. The most common tool used to check layer thickness is the sagittal silicone index, which is reliable but involves planning; therefore, it requires two stages appointments. In this clinical case, a novel procedure is used to prepare, to model and to check thickness of composite shades in a single appointment, thus providing a symmetric esthetic outcome. A healthy 21-year-old woman referred to our dental office for the esthetic rehabilitation of both maxillary central incisors. The correct composite bilateral and symmetric layer thickness management provided a predictable esthetic outcome of the restorations. The main objective of this case presentation is to describe a novel technique that is able to save chair-time and dental laboratory costs during direct restorations in anterior teeth.

Core build-up resin composites: an in-vitro comparative study

Aim

Resin composite (RC) are commonly used under full crowns. However, independent information is lacking to guide practitioners regarding core RC material selection. This study aimed at comparing the flexural properties of a large selection of commercially-available core build-up RCs (CBU-RC), either light-, self- or dual-cure, to conventional light-cure RCs.

Methods

RCs were injected into a 25 × 2×2mm Teflon mold, and either light-cured during 20 s (materials with claimed light-cure characteristics) or covered by aluminum during 10 min (dual- and self-cure CBU-RCs). They were subjected after a one-week water storage at 37.5 °C to three-point bending, and Flexural modulus (E _flex) and Flexural Strength (σ _f) were calculated (n = 20). Thermogravimetric analysis (n = 3) was performed to determine inorganic filler content (%).

Results

For dual-cure CBU-RCs, both RC (p < .0001) and light-curing (p = .0007) had a significant influence on E _flex, while only RC was significant for σ _f (p < .0001). Between all conventional RCs and CBU-RCs, significant differences were observed (p < .0001), both regarding E _flex and σ _f, with values ranging from 3.9 to 15.5 GPa and from 76 to 130.3 MPa, respectively. Higher E _flex values were observed for light-cure RCs than for self- and dual-cure ones, while no clear trend was noticed regarding σ _f. Good linear correlation was found between inorganic filler content and E _flex (R ²=0.85, p < .0001), but not with σ _f (R ²=0.08, p = .1609).

Conclusion

This work demonstrated a positive influence of light-curing on dual-cure CBU-RC's E _flex. It also highlighted large differences in flexural properties (especially E _flex) among the investigated materials, questioning the use of some CBU-RCs as dentin replacement in case of large tissue loss.