Effects of electron beam irradiation of cellulose acetate cigarette filters

A review on cigarette butts: Environmental abundance, characterization, and toxic pollutants released into water from cigarette butts

Every year, trillions of cigarette butts (CBs) are discarded into the environment. CBs are frequently found on beaches and in urban areas worldwide due to their high resistance to physical and biological degradation. Components of CBs, such as heavy metals, polycyclic aromatic hydrocarbons (PAHs), cellulose acetate fibers (microplastics), nicotine, aromatic amines, and BTEX (benzene, toluene, ethylbenzene, and xylene), are released into aquatic environments. Harmful components released into water from CBs cause both water pollution and toxic effects on different aquatic organisms. In the first part of this review, studies investigating the density of CBs in different environments were reviewed. In the second part, the results of studies investigating the characteristics of cigarette filters using characterization techniques were reviewed. Then, studies on heavy metals, PAHs, microplastics (microfibers), nicotine, aromatic amines and BTEX released into water from CBs were reviewed, and factors affecting the types, amounts and release conditions of compounds (pollutants) released into water from CBs were discussed. In the last section, taking into account the studies carried out to date, deficiencies in the research on pollutants released into water from CBs were identified and recommendations were made for future studies. This review highlights the environmental abundance of CBs, the characterization results of CB filters, and the release into water of some substances in CBs that are pollutants for the aquatic environment. This review may serve as a guide to elucidate the environmental abundance of CBs, the characteristics of CBs/filters, and the concentration in water of some pollutants released into water from CBs.

Glucaric acid additives for the antiplasticization of fibers wet spun from cellulose acetate/acetic acid/water

Cellulose acetate (CA) receives notable attention as an environmentally friendly, biodegradable polymer from renewable, low-cost resources. CA polymers are believed to have a critical role in shaping a greener and more circular textile economy. However, the mechanical properties of CA fibers are among the lowest in terms of its tensile strength, poor wet strength, and low flexural strength. This study investigates the effect of biobased additives for antiplasticizing the mechanical performance and structure of CA fibers. At up to 5 % of CA, glucaric acid (GA) and its monoammonium salt were added to CA fibers. With 1.5 % GA additive, tensile modulus improved by 155%, tensile strength by 55 %, and CA flexibility according to knot to straight fiber tenacity ratios improved by 107 % when compared to neat CA fibers. Based on the results, green small molecule antiplasticizers do exist, but their performance improvements are observed at low percentages of loading.

Extraction of nano cellulose fibers from the banana peel and bract for production of acetyl and lauroyl cellulose

The principal aim of the present study is to develop a method for the production of cellulose nanofibers, from the banana peel (BP) and bract (BB). It is also the aim of this study to produce cellulose-based biopolymers through acetyl and lauroyl modifications. The microwave digestion method and ball milling assisted ultra-sonication method was optimized for sustainable extraction of micro and nano cellulose fibers, respectively. The microwave digestion method was found to be effective in the removal of hemicellulose and lignin. Micro and nano cellulose fibers of BP and BB were found to contain type I cellulose structure. Thermal stability and crystallinity index of cellulose nanofibers were examined to be higher than it's native micro cellulose. Nano cellulose fibers were examined to be a potential source for production of acetyl and lauroyl cellulose, with a high degree of substitution and thermal stability. Hence, microwave digestion and ball milling assisted ultra-sonication method was proven to be effective in the extraction of nano cellulose fiber for development of cellulose-based polymers.

Reactive Black 5 dye degradation using filters of smuggled cigarette modified with Fe3

This study presents an attempt to solve two serious environmental problems: the generation of toxic effluents and solid waste disposal. The work proposes recycling cigarette filters with the purpose of degrading reactive dyes, which are used in the textile industry. Filters of smuggled cigarettes were recycled through Fe³⁺ immobilization on their surface. The material obtained was characterized through Fourier transform infrared spectroscopy (FTIR), atomic absorption spectroscopy (AAS), scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS), and ultraviolet-visible spectroscopy (UV-vis). The factorial design revealed that the most suitable conditions for the degradation of Reactive Black 5 dye were obtained by using 1 g of material at pH 3.0 in a 100 mg L^-1 hydrogen peroxide solution. The material showed excellent performance in the Reactive Black 5 dye degradation process; in 60 min, 99.09 % dye was removed. At pH 7.0, the dye degradation was 72.67 %, indicating that the material prepared can be used at pH values greater than 3.0 without the occurrence of hydrated Fe³⁺ oxide precipitation. Furthermore, the material showed no loss of catalytic activity after three degradation studies.

Superhydrophobic fibers from cigarette filters for oil spill cleanup

Cellulose acetate fibers from cigarette butts were converted into superhydrophobic fibers and used for oil spill cleanup.