Influence of gamma radiation on properties of paper and textile fibres during disinfection

Non-thermal plasma decontamination of microbes: a state of the art

Microbial decontamination is a critical concern in various sectors, from healthcare to food processing. Traditional decontamination methods, while effective to a degree, present limitations in terms of environmental impact, efficiency, and potential harm to the target material. This review investigates the emerging realm of non-thermal plasma (NTP) as a promising alternative for microbial decontamination, emphasizing its mechanisms, reactor designs and applications. The mechanism decomposed into physical, chemical and biological effects of plasma, are elaborated upon to provide a foundational understanding of the intrinsic principles of plasma decontamination. Except for the generation type of NTP, reactors and other parameters by which NTP achieves microbial decontamination, emphasizing the design considerations and parameters that influence its efficacy. Moreover, the latest applications of NTP in decontaminating air, water, and surfaces, supported by the latest research findings in each domain are explored. Additionally, the perspectives on the future research tendencies of NTP decontamination and disinfection are highlighted with potential avenues for exploration and innovation. Through this comprehensive review, the aim is to underscore the potential of NTP, particularly DBD plasma, as a versatile, efficient, and environmentally friendly method for microbial decontamination.

Analysis of the Surface of Historic Fabric from the Auschwitz-Birkenau State Museum after Treatment with Ethanol Mist Used to Eliminate Microorganisms Harmful to Human Health

AIM

the aim of the work was to present the changes occurring on the model and historical cotton surface of cotton resulting from disinfection with 90% ethanol mist.

MATERIALS AND METHODS

Samples of historical materials consisted of fabric elements from suitcases stored in A-BSM. A mist of 90% ethanol was applied for 15 s at a distance of 16 cm from the surface. The spectra of cotton samples before and after ethanol application were recorded using Fourier transform infrared spectroscopy (FTIR-ATR). Analyses of the surface layers were performed using X-ray photoelectron spectroscopy (XPS).

RESULTS

the decontamination performed did not show any significant differences in the chemical composition and surface structure of cotton before and after the use of 90% ethanol mist.

CONCLUSIONS

Ethanol mist, which eliminates microorganisms from the historical surface, does not cause significant changes to the surface of historical objects.

Active Cellulose-Based Food Packaging and Its Use on Foodstuff

The essential role of active packaging is food quality improvement, which results in an extension of shelf life. Active packaging can also further enhance distribution from the origin point, and contributes to food waste reduction, offering greater sustainability. In this study, we introduced a new method for obtaining cellulose-based active packages, combining gamma irradiation as an eco-friendly activation process, and clove essential oil and cold-pressed rosehip seed oil as bioactive agents. Newly obtained bioactive materials were evaluated to assess their structural, hydrophobic, and morphological properties, thermal stability, and antioxidant and antimicrobial properties. The results showed that the plant oils induced their antimicrobial effects on paper, using both in vitro tests, against several bacterial strains (Gram-positive bacteria Listeria monocytogenes and Gram-negative bacteria Salmonella enteritidis and Escherichia coli), and in vivo tests, on fresh cheese curd and beef. Moreover, these oils can help control foodborne pathogens, which leads to extended shelf life.

Physical Chemical Investigation of Gamma-Irradiated Parchment for Preservation of Cultural Heritage

The historical artefacts of parchment are prone to degradation if the storage conditions are improper due to the collagen structure having a limited stability under physical, chemical, and biological agent attacks. The parchment structure is difficult to characterize due to the variety of manufacturing traditions (eastern/western), intrinsic variability of skins (i.e., species, breeding variation, living conditions, effects of pathologies, etc.), biodeterioration, and aging, and the main concern in its analysis is its uniformity. The deterioration of parchment collagen produces a rather stiff or in some circumstances, a relaxed structure. Any intervention or treatment of unique, very precious cultural heritage artefacts must not negatively influence the properties of the component materials. Gamma irradiation is a relatively new technique of bioremediation. Data on the leather properties pre- and post-ionizing radiation bioremediation treatments are few in the literature. Fewer data are available on the historical leather and parchment physical chemical characteristics after ionizing gamma irradiation. This research had two main objectives: (i) the characterization of the parchment structure's uniformity across the analyzed areas and its mechanical properties, i.e., tensile stress by mechanical tests and ATR-FTIR spectroscopy; and (ii) to establish parchment tolerance when exposed to ionizing gamma radiation as a pre-requisite for cultural heritage preservation irradiation treatment. It was found that the mechanical tests and ATR-FTIR spectroscopy may identify changes in the parchment's irradiated structure and that the preservation of cultural heritage parchment artefacts may be performed at maximum 15 kGy gamma irradiation dose.

Application of Vegetal Oils in Developing Bioactive Paper-Based Materials for Food Packaging

A major disadvantage of conventional food packaging materials is the difficulty in disposal and recycling, due to their high stability to environmental and thermal stress. The trend now is to develop new eco-friendly food packaging that can substitute fossil fuel derived materials. Cellulose, the main constituent of paper-based food packages, is a favorable starting material for such purpose. In this study we present a new method to obtain bioactive paper based materials suitable for food packaging applications. By combining eco-friendly activation processes (cold plasma or gamma irradiation) and bioactive plant oils (clove essential oil and rosehip seeds vegetal oil) for modification of kraft paper, new materials with antioxidant and antibacterial activity were obtained. The oil-loaded bioactive paper based materials presented increased hydrophobicity (from 97° contact angle in the case of kraft paper to 115° for oil-loaded sample) and decreased water adsorption (a one-quarter decrease). Due to various interactions with the functional groups of plant oils, the modified kraft paper presents different antibacterial and antioxidant properties. Essential clove oil imprinted higher antioxidant activity (owing to the high content in eugenol and eugenol acetate phenolic compounds) and was more efficient in reducing the bacterial growth on fresh beef meat and on fresh curd cheese. The cold pressed rosehip seeds oil acted as aslightly better antibacterial agent against Listeria monocytogenes (+), Salmonella enteritidis (−) and Escherichia coli (−) bacterial strains. Thus, the newly developed bioactive paper could be used as effective packaging material that can help preserving food quality for longer time.

Influence of Disinfectants on Natural Textile Fibres

Textiles are frequently used in bookbinding or for attaching pendent seals and thus they are an integral part of archival and library items. Any part of these items can be contaminated by various microorganisms. Consequently, it is often necessary to include disinfection procedures in the initial stages of the conservation process. Primarily, the agents employed in conservation must not harm the treated material. This work was concerned with monitoring the effect of selected disinfectant agents (ethylene oxide, Septonex®, glutaraldehyde, Bacillol® AF, butanol vapours, Acticide® MV, silver nanoparticles, Chiroseptol®) on the properties and long-term stability of natural textile fibres (cotton and silk). The disinfected textiles were subjected to three kinds of artificial ageing (dry heat, moist heat, and light) and their properties were determined by means of the total colour difference, thread tensile strength and the limiting viscosity number.

The Bad and the Good-Microorganisms in Cultural Heritage Environments-An Update on Biodeterioration and Biotreatment Approaches

Cultural heritage objects constitute a very diverse environment, inhabited by various bacteria and fungi. The impact of these microorganisms on the degradation of artworks is undeniable, but at the same time, some of them may be applied for the efficient biotreatment of cultural heritage assets. Interventions with microorganisms have been proven to be useful in restoration of artworks, when classical chemical and mechanical methods fail or produce poor or short-term effects. The path to understanding the impact of microbes on historical objects relies mostly on multidisciplinary approaches, combining novel meta-omic technologies with classical cultivation experiments, and physico-chemical characterization of artworks. In particular, the development of metabolomic- and metatranscriptomic-based analyses associated with metagenomic studies may significantly increase our understanding of the microbial processes occurring on different materials and under various environmental conditions. Moreover, the progress in environmental microbiology and biotechnology may enable more effective application of microorganisms in the biotreatment of historical objects, creating an alternative to highly invasive chemical and mechanical methods.

Polymerization Reactions and Modifications of Polymers by Ionizing Radiation

Ionizing radiation has become the most effective way to modify natural and synthetic polymers through crosslinking, degradation, and graft polymerization. This review will include an in-depth analysis of radiation chemistry mechanisms and the kinetics of the radiation-induced C-centered free radical, anion, and cation polymerization, and grafting. It also presents sections on radiation modifications of synthetic and natural polymers. For decades, low linear energy transfer (LLET) ionizing radiation, such as gamma rays, X-rays, and up to 10 MeV electron beams, has been the primary tool to produce many products through polymerization reactions. Photons and electrons interaction with polymers display various mechanisms. While the interactions of gamma ray and X-ray photons are mainly through the photoelectric effect, Compton scattering, and pair-production, the interactions of the high-energy electrons take place through coulombic interactions. Despite the type of radiation used on materials, photons or high energy electrons, in both cases ions and electrons are produced. The interactions between electrons and monomers takes place within less than a nanosecond. Depending on the dose rate (dose is defined as the absorbed radiation energy per unit mass), the kinetic chain length of the propagation can be controlled, hence allowing for some control over the degree of polymerization. When polymers are submitted to high-energy radiation in the bulk, contrasting behaviors are observed with a dominant effect of cross-linking or chain scission, depending on the chemical nature and physical characteristics of the material. Polymers in solution are subject to indirect effects resulting from the radiolysis of the medium. Likewise, for radiation-induced polymerization, depending on the dose rate, the free radicals generated on polymer chains can undergo various reactions, such as inter/intramolecular combination or inter/intramolecular disproportionation, b-scission. These reactions lead to structural or functional polymer modifications. In the presence of oxygen, playing on irradiation dose-rates, one can favor crosslinking reactions or promotes degradations through oxidations. The competition between the crosslinking reactions of C-centered free radicals and their reactions with oxygen is described through fundamental mechanism formalisms. The fundamentals of polymerization reactions are herein presented to meet industrial needs for various polymer materials produced or degraded by irradiation. Notably, the medical and industrial applications of polymers are endless and thus it is vital to investigate the effects of sterilization dose and dose rate on various polymers and copolymers with different molecular structures and morphologies. The presence or absence of various functional groups, degree of crystallinity, irradiation temperature, etc. all greatly affect the radiation chemistry of the irradiated polymers. Over the past decade, grafting new chemical functionalities on solid polymers by radiation-induced polymerization (also called RIG for Radiation-Induced Grafting) has been widely exploited to develop innovative materials in coherence with actual societal expectations. These novel materials respond not only to health emergencies but also to carbon-free energy needs (e.g., hydrogen fuel cells, piezoelectricity, etc.) and environmental concerns with the development of numerous specific adsorbents of chemical hazards and pollutants. The modification of polymers through RIG is durable as it covalently bonds the functional monomers. As radiation penetration depths can be varied, this technique can be used to modify polymer surface or bulk. The many parameters influencing RIG that control the yield of the grafting process are discussed in this review. These include monomer reactivity, irradiation dose, solvent, presence of inhibitor of homopolymerization, grafting temperature, etc. Today, the general knowledge of RIG can be applied to any solid polymer and may predict, to some extent, the grafting location. A special focus is on how ionizing radiation sources (ion and electron beams, UVs) may be chosen or mixed to combine both solid polymer nanostructuration and RIG. LLET ionizing radiation has also been extensively used to synthesize hydrogel and nanogel for drug delivery systems and other advanced applications. In particular, nanogels can either be produced by radiation-induced polymerization and simultaneous crosslinking of hydrophilic monomers in "nanocompartments", i.e., within the aqueous phase of inverse micelles, or by intramolecular crosslinking of suitable water-soluble polymers. The radiolytically produced oxidizing species from water, •OH radicals, can easily abstract H-atoms from the backbone of the dissolved polymers (or can add to the unsaturated bonds) leading to the formation of C-centered radicals. These C-centered free radicals can undergo two main competitive reactions; intramolecular and intermolecular crosslinking. When produced by electron beam irradiation, higher temperatures, dose rates within the pulse, and pulse repetition rates favour intramolecular crosslinking over intermolecular crosslinking, thus enabling a better control of particle size and size distribution. For other water-soluble biopolymers such as polysaccharides, proteins, DNA and RNA, the abstraction of H atoms or the addition to the unsaturation by •OH can lead to the direct scission of the backbone, double, or single strand breaks of these polymers.

Gamma Ray Irradiation Enhances the Linkage of Cotton Fabrics Coated with ZnO Nanoparticles

In this work, we aim to study zinc oxide (ZnO)-based functional materials over cotton fabrics and their effects after gamma ray exposure of 9 kGy. We found that the binding of the nanoparticles with cotton fabrics can be enhanced after irradiation. This could be due to the oxygen deficiency or defects created in the interface between ZnO and cotton fabrics after irradiation. Near-edge X-ray absorption fine structure and X-ray photoelectron spectroscopy (XPS) were used to detect the oxygen inadequacies generated in the interior and at the surface of the ZnO nanoparticles after gamma ray exposure. XPS results showed that the binding energy of Zn shifts by 2 eV at 1.5 kGy and by 4 eV at 9 kGy. This huge shift of about 4 eV is completely different from other works due to the reaction that takes place on the interface between ZnO nanostructures and cotton fabrics after gamma ray irradiation. Overall, this work suggests that after gamma ray irradiation, there is an enhanced level of binding between the coated functional nanoparticles and cotton fabrics, which can be advantageous for the textile industries.