Calcification of synthetic polymers functionalized with negatively ionizable groups: A critical review

Zwitterionic keratin coating on silk-Laponite fibrous membranes for guided bone regeneration

Implant-related infection is one of the main challenges in periodontal diseases. According to the zwitterionic properties of keratin, we aim to develop guided bone regeneration (GBR) membrane with antibacterial and bioactivity properties using a keratin coating. In this study, electrospun silk fibroin (SF)-Laponite (LAP) fibrous membranes were developed as GBR membranes, and keratin extracted from sheep wool was electrosprayed on them. Here, the role of electrospraying time (2, 3, and 4h) on the properties of the GBR membranes was investigated. After physicochemical characterization of the keratin-modified membranes, in vitro bioactivity and degradation rate of the membranes were studied in simulated body fluid and phosphate buffer saline, respectively. Moreover, proliferation and differentiation of mesenchymal stem cells were evaluated in contact with the keratin-modified SF-LAP membrane. Finally, the antibacterial activity of membranes against gram-positive bacteria (Staphylococcus aureus) was investigated. Results demonstrated the successful formation of homogeneous wool keratin coating on SF-LAP fibrous membranes using a simple electrospray process. While wool keratin coating significantly enhanced the elongation and hydrophilicity of the SF-LAP membrane, the mechanical strength was not changed. In addition, keratin coating significantly improved the bioactivity and degradation rate of SF-LAP membranes, owing to the carboxyl groups of amino acids in keratin coating. In addition, the synergic role of LAP nanoparticles and keratin coating drastically improved osteoblast proliferation and differentiation. Finally, the zwitterionic property of wool keratin coating originating from their equal positive (NH₃ ⁺ ) and negative (COO^- ) charges considerably improved the antibacterial activity of the SF-LAP membrane. Overall, keratin-coated SF-LAP fibrous membranes with significant mechanical and biological properties could have the potential for GBR membranes.

Injectable hydrogels for vascular embolization and cell delivery: The potential for advances in cerebral aneurysm treatment

Cerebral aneurysms are vascular lesions caused by the biomechanical failure of the vessel wall due to hemodynamic stress and inflammation. Aneurysmal rupture results in subarachnoid hemorrhage often leading to death or disability. Current treatment options include open surgery and minimally invasive endovascular options aimed at secluding the aneurysm from the circulation. Cerebral aneurysm embolization with appropriate materials is a therapeutic approach to prevent rupture and the resultant clinical sequelae. Metallic platinum coils are a typical, practical option to embolize cerebral aneurysms. However, the development of an alternative treatment modality is of interest because of poor occlusion permanence, coil migration, and coil compaction. Moreover, minimizing the implanted foreign materials during therapy is of importance not just to patients, but also to clinicians in the event an open surgical approach has to be pursued in the future. Polymeric injectable hydrogels have been investigated for transcatheter embolization and cell therapy with the potential for permanent aneurysm repair. This review focuses on how the combination of injectable embolic biomaterials and cell therapy may achieve minimally invasive remodeling of a degenerated cerebral artery with promise for superior outcomes in treatment of this devastating disease.

Recent Advances in Pharmaceutical Potential of Brown Algal Polysaccharides and their Derivatives

Marine plants, animals and microorganisms display steady growth in the ocean and are abundant carbohydrate resources. Specifically, natural polysaccharides obtained from brown algae have been drawing increasing attention owing to their great potential in pharmaceutical applications. This review describes the structural and biological features of brown algal polysaccharides, including alginates, fucoidans, and laminarins, and it highlights recently developed approaches used to obtain the oligo- and polysaccharides with defined structures. Functional modification of these polysaccharides promotes their advanced applications in biomedical materials for controlled release and targeted drug delivery, etc. Moreover, brown algal polysaccharides and their derivatives possess numerous biological activities with anticancer, anticoagulant, wound healing, and antiviral properties. In addition, we also discuss carbohydrate- based substrates from brown algae, which are currently in clinical and preclinical studies, as well as the marine drugs that are already on the market. The present review summarizes the recent development in carbohydratebased products from brown algae, with promising findings that could rapidly facilitate the future discovery of novel marine drugs.

Bisphosphonic Acid-Functionalized Cross-Linkers to Tailor Hydrogel Properties for Biomedical Applications

Two bisphosphonic acid-functionalized cross-linkers (one novel) with different spacer chain characteristics were synthesized and incorporated into hydrogels by copolymerization with 2-hydroxyethyl methacrylate at different ratios to control the hydrogels' swelling, mechanical properties, and ability to support mineralization for biomedical applications. The cross-linkers were synthesized by reaction of 2-isocyanatoethyl methacrylate and bisphosphonated diamines followed by selective dealkylation of the bisphosphonate ester groups. The hydrogels provide in vitro growth of carbonated apatite, morphology affected by the cross-linker structure. The hydrogels exhibit a high Young's modulus E (up to 400 kPa) and can sustain up to 10.2 ± 0.1 MPa compressive stresses. E and hence the cross-link density significantly increases upon mineralization reflecting the formation of many bisphosphonate BP-Ca2+ bonds acting as additional cross-links. Cyclic mechanical tests reveal self-recoverability of hydrogels because of reversible nature of BP-Ca2+ bonds. The results suggest that these cross-linkers can add calcium-binding abilities to hydrogels synthesized from any monomer and improve their mechanical, swelling, and mineralization properties and hence are potentially useful materials for biomedical applications.

In vitro mineralisation of grafted ePTFE membranes carrying carboxylate groups

In vitro mineralisation in simulated body fluid (SBF) of synthetic polymers continues to be an important area of research as the outcomes cannot be predicted. This study evaluates a series of ePTFE membranes grafted with carboxylate-containing copolymers, specifically using acrylic acid and itaconic acid for grafting. The samples differ with regards to graft density, carboxylate density and polymer topology. The type and amount of mineral produced in 1.5 × SBF was dependent on the sample characteristics as evident from XPS, SEM/EDX, and FTIR spectroscopy. It was found that the graft density affects the mineral phases that form and that low graft density appear to cause co-precipitation of calcium carbonate and calcium phosphate. Linear and branched graft copolymer topology led to hydroxyapatite mineralisation whereas crosslinked graft copolymers resulted in formation of a mixture of calcium-phosphate phases. This study demonstrates that in vitro mineralisation outcomes for carboxylate-containing graft copolymers are complex. The findings of this study have implications for the design of bioactive coatings and are important for understanding the bone-biomaterial interface.

Phosphorylation of alginate: synthesis, characterization, and evaluation of in vitro mineralization capacity

Phosphorylation of alginate was achieved using a heterogeneous urea/phosphate reaction. The degree and stereoselectivity of phosphorylation as well as the effects on the physical properties of the polysaccharide were investigated by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies, inductively coupled plasma optical-emission spectroscopy (ICP-OES), and size exclusion chromatography (SEC). Multidimensional NMR studies of the phosporylated alginate revealed that phosphorylation of the M residues occurred predominantly at the C3 (equatorial) carbon of the polysaccharide ring. In addition, a more comprehensive assignment of the (1)H NMR spectrum of alginate, compared with those previously reported in the literature, is provided here. Hydrogel materials were formed from ionically cross-linked blends of phosphorylated alginate and alginate. These blended hydrogels showed an enhanced resistance to degradation by chelating agents compared with cross-linked alginate hydrogels and a reduction in their mineralization potential.

Development and characterization of rhVEGF-loaded poly(HEMA-MOEP) coatings electrosynthesized on titanium to enhance bone mineralization and angiogenesis

Osteointegration of titanium implants could be significantly improved by coatings capable of promoting both mineralization and angiogenesis. In the present study, a copolymeric hydrogel coating, poly-2-hydroxyethyl methacrylate-2-methacryloyloxyethyl phosphate (P(HEMA-MOEP)), devised to enhance calcification in body fluids and to entrap and release growth factors, was electrosynthesized for the first time on titanium substrates and compared to poly-2-hydroxyethyl methacrylate (PHEMA), used as a blank reference. Polymers exhibiting negatively charged groups, such as P(HEMA-MOEP), help to enhance implant calcification. The electrosynthesized coatings were characterized by X-ray photoelectron spectroscopy and atomic force microscopy. MG-63 human osteoblast-like cell behaviour on the coated specimens was investigated by scanning electron microscopy, MTT viability test and osteocalcin mRNA detection. The ability of negatively charged phosphate groups to promote hydroxyapatite-like calcium phosphate deposition on the implants was explored by immersing them in simulated body fluid. Similar biological responses were observed in both coated specimens, while calcium-phosphorus globules were detected only on P(HEMA-MOEP) surfaces pretreated with alkaline solution. Testing of the ability of P(HEMA-MOEP) hydrogels to entrap and release human recombinant vascular endothelial growth factor, to tackle the problem of insufficient oxygen and nutrient delivery, suggested that P(HEMA-MOEP)-coated titanium prostheses could represent a multifunctional material suitable for bone restoration applications.

Calcification capacity of porous pHEMA-TiO₂ composite hydrogels

Many investigations have been attempted to promote calcification of synthetic polymers for applications as orthopaedic and dental implants. In this study, novel titanium dioxide (TiO(2)) reinforced porous poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels were synthesized. Calcification capacity of the composite polymers was examined using light microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy after incubation of the materials in a simulated body fluid up to 53 days. Mechanical strength, porosity and in vitro cytotoxicity were also investigated. Calcification capacity of porous pHEMA was significantly enhanced by the addition of TiO(2) particulates. Infiltration of calcium phosphate, up to 1000 mum, was observed. The diffusion capacity of calcium ions was affected by the porosity and the interconnectivity of pores in the hydrogel polymers which were influenced by the presence of TiO(2) and the monomer concentration. Cell viability tests indicated that porous hydrogels containing 7.5% TiO(2) were not toxic to 3T3 fibroblast cells. These results demonstrate that incorporating TiO(2) nanoparticulates can promote enhanced formation of calcium phosphate whilst maintaining the porosity and interconnectivity of the hydrogel polymers and would be very useful for the development of orthopaedic tissue engineering scaffolds.

Time-of-flight secondary ion mass spectrometry study of the orientation of a bifunctional diblock copolymer attached to a solid substrate

A block copolymer consisting of a phosphate-containing moiety (poly[2-(methacryloyloxy)ethyl phosphate], PMOEP) and a keto-containing moiety (poly[2-(acetoacetoxy)ethyl methacrylate], PAAEMA) showed good stability after attachment to an APS amine-modified glass slide, as did both of the respective homopolymers. The PAAEMA homopolymer can attach to the APS amine groups via covalent linkages, while the PMOEP homopolymer most likely attaches through electrostatic interactions involving deprotonated phosphate and protonated amine groups. To elucidate the conformation of the block copolymer after attachment, particularly with respect to the PMOEP segment orientation, principal component analysis (PCA) of time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectra of the surface-attached polymer layers was performed. Comparison with the pure homopolymer spectra and interpretation after PCA indicate that the adsorbed conformation is not random. Rather, the copolymer is adsorbed in a conformation that preferentially exposes the PMOEP block toward the outer surface. We thus conclude that the most likely conformation of PMOEP-b-PAAEMA immobilized onto the APS-modified glass slide is via covalent interfacial linkages involving the PAAEMA block with the result that the surface is enriched in PMOEP tails. This in turn implies that under the conditions applied (dry DMF) the covalent coupling of keto groups to the amine groups of the aminated slide is more efficient than the proton transfer required for the generation of electrostatic attractions. This (partially) preferential orientation of the PMOEP-b-PAAEMA copolymer could have significant implications on interfacial interactions such as those involved in nucleation and the subsequent mineralization sequence of events in hydroxyapatite formation. The present study demonstrates that ToF-SIMS is a powerful tool not only for the investigation of the surface composition of adsorbed layers, but also for probing the molecular conformation of such adsorbed block copolymers, though care is required in the PCA analysis of multiple spectra.

PHEMA hydrogels modified through the grafting of phosphate groups by ATRP support the attachment and growth of human corneal epithelial cells

Converting the surface of poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel into a cell-adhesive surface has been successfully achieved through a method based on atom transfer radical polymerization (ATRP) grafting. Following activation of the surface hydroxyl groups of PHEMA by bromination, surface-initiated ATRP of mono(2-methacryloyloxyethyl) phosphate (MMEP) was conducted in a methanol-water system with Cu(I)Br as catalyst at room temperature. The conversion of PHEMA hydroxyl groups to brominated isobutyryl groups and the occurrence of grafting of PMMEP were confirmed by infrared and X-ray photoelectron spectroscopies. Cell attachment experiments were conducted by culturing human corneal limbal epithelial cells on the PMMEP-grafted PHEMA, and on unmodified PHEMA and tissue culture plastic for comparison. The results showed that the grafted PMMEP was homogeneously distributed, and the phosphate groups appeared to significantly promote the attachment, spreading and growth of cells, at a level comparable to the tissue culture plastic.

Influence of a diene impurity on the molecular structure of phosphate-containing polymers with medical applications

We have demonstrated that the unacknowledged presence of almost 30% diene impurity in some commercial phosphate monomers had not only a significant effect on the molecular structure (topology) of a series of synthesized polymers but the instability of the ester functionalities during these polymerizations resulted in unexpectedly complex co-polymer chemistry.

Mineralization of radiation-crosslinked polyvinyl alcohol/polyvinyl pyrrolidone hydrogels

A study of the calcification of the polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) hydrogels during their exposure to a calcium chloride solution or a simulated body fluid has been carried out. On the basis of the experiments, using a two-compartment permeation cell, the diffusion of calcium ions and their subsequent deposition in the hydrogels were elucidated. Steady-batch experiments were also performed to further elaborate the deposition pattern and the types of calcium deposits. It was demonstrated that Fick's second law of diffusion can describe the diffusion of calcium ions through PVA/PVP hydrogels at 310 K. The diffusion coefficient was determined to be (4.4+/-0.1)x10(-10) m2/s and the partition coefficient for the hydrogels was 0.06. Formation of calcium deposits was noticed taking place both on the surface and inside the hydrogels. The deposits formed on the surface have flake morphology, while the deposits inside the hydrogels are more like globular aggregates. Both types of deposits have been characterized as being comprised calcium and hydroxyl ion deficient apatites with chloride ions the most likely substituting species at the hydroxyl sites.