Temperature-swing adsorption of precious metal ions onto poly(2-(dimethylamino)ethyl methacrylate) gel

Removal characteristics of two anionic dyes by a polyethylenimine/poly(N,N-dimethylaminoethyl methacrylate) gel

The highly efficient gel obtained via the copolymerization of polyethylenimine (PEI) and poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) was successfully applied for the removal of two anionic dyes (amaranth and sunset yellow) from their aqueous solutions. Moreover, the results of the adsorption experiments for sunset yellow and amaranth on the PEI/PDMAEMA gel demonstrate that the adsorption equilibrium both could be achieved within 1 h, and the maximum adsorption capacities were 757 mg g⁻¹ and 744 mg g⁻¹ under unoptimized conditions, respectively. Moreover, the PEI/PDMAEMA composite gel was found to be pH-sensitive and the addition of salts together with ionic strength were also explored for understanding the adsorption performance. In addition, it can be found from the studies of adsorption mechanism that it is mainly electrostatic adsorption; moreover, the separation process conforms to the Langmuir adsorption isotherm model and the pseudo second-order kinetic model, which is a spontaneous endothermic process. When the PEI/PDMAEMA gel was used in continuous flow column, it could handle large volumes of dye solution with very low concentrations due to its strong enrichment capacity. Finally, the desorption experiments show that the PEI/PDMAEMA gel is easier to regenerate and has a longer lifetime. Therefore, the high adsorption capacity and easy operation of adsorption for amaranth and sunset yellow on the PEI/PDMAEMA gel make it a potential application prospect for the practical removal of other kinds of similar pollutants.

The highly efficient gel obtained via the copolymerization of polyethylenimine and poly(N,N-dimethylaminoethyl methacrylate) was successfully applied to remove two anionic dyes (amaranth and sunset yellow) from their aqueous solutions.

Semi-Interpenetrating Polymer Networks with Predefined Architecture for Metal Ion Fluorescence Monitoring

The development of new synthetic approaches for the preparation of efficient 3D luminescent chemosensors for transition metal ions receives considerable attention nowadays, owing to the key role of the latter as elements in biological systems and their harmful environmental effects when present in aquatic media. In this work, we describe an easy and versatile synthetic methodology that leads to the generation of nonconjugated 3D luminescent semi-interpenetrating amphiphilic networks (semi-IPN) with structure-defined characteristics. More precisely, the synthesis involves the encapsulation of well-defined poly(9-anthrylmethyl methacrylate) (pAnMMA) (hydrophobic, luminescent) linear polymer chains within a covalent poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) hydrophilic polymer network, derived via the 1,2-bis-(2-iodoethoxy)ethane (BIEE)-induced crosslinking process of well-defined pDMAEMA linear chains. Characterization of their fluorescence properties demonstrated that these materials act as strong blue emitters when exposed to UV irradiation. This, combined with the presence of the metal-binding tertiary amino functionalities of the pDMAEMA segments, allowed for their applicability as sorbents and fluorescence chemosensors for transition metal ions (Fe3+, Cu2+) in solution via a chelation-enhanced fluorescence-quenching effect promoted within the semi-IPN network architecture. Ethylenediaminetetraacetic acid (EDTA)-induced metal ion desorption and thus material recyclability has been also demonstrated.

Smart Macroporous IPN Hydrogels Responsive to pH, Temperature, and Ionic Strength: Synthesis, Characterization, and Evaluation of Controlled Release of Drugs

Fast responsive macroporous interpenetrating polymer network (IPN) hydrogels were fabricated in this work by a sequential strategy, as follows: the first network, consisting of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEM) cross-linked with N,N'-methylenebisacrylamide (BAAm), was prepared at -18 °C, the second network consisting of poly(acrylamide) (PAAm) cross-linked with BAAm, being also generated by cryogelation technique. Both single network cryogels (SNC) and IPN cryogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and water uptake. The presence of weak polycation PDMAEM endows the SNCs and the IPNs cryogels with sensitivity at numerous external stimuli such as pH, temperature, ionic strength, electric field, among which the first three were investigated in this work. It was found that the initial concentration of monomers in both networks was the key factor in tailoring the properties of IPN cryogels such as swelling kinetics, equilibrium water content (EWC), phase transition temperature and the response at ionic strength. The pore size increased after the formation of the second network, the swelling kinetics in pure water being comparable with that of the SNC, phase transition temperature being situated in the range 35-36 °C for IPN cryogels. The water uptake at equilibrium (WUeq) abruptly increased at pH < 3.0 in the case of SNCs, whereas the response of IPN cryogels at the decrease of pH from 6.0 to 1.0 was strongly dependent on the gel structure, the values of WUeq being lower at a higher concentration of DMAEM in the first network, the monomer concentration in the second network being about 10 wt %. The pH response was very much diminished when the monomer concentration was high in both networks (15 wt % in the first network, and 21 wt % in the second network). The increase of the ionic strength from 0 up to 0.3 M NaCl led to the decrease of the WUeq, for all cryogels, the level of dehydration being higher and faster for the SNC than for the corresponding IPN cryogel. The release of diclofenac sodium (DS), as a model acidic drug, triggered by pH, temperature, and ionic strength from the IPN cryogels was evaluated. A pulsatile release of DS from the IPN cryogels was presented, with a slower release at 34 °C (below VPTT) and a faster release at 37 and 40 °C (above the VPTT).

Temperature and pH-dependent swelling and copper(ii) adsorption of poly(N-isopropylacrylamide) copolymer hydrogel

Poly(N-isopropylacrylamide-co-acrylamide-co-maleic acid) (PNIPAM-AM-MA) hydrogel, which can make the Cu²⁺ adsorption process stimuli-responsive under temperature and pH value control, has been synthesized by free radical polymerization.