Immunoglobulin G recognition with Fab fragments imprinted monolithic cryogels: Evaluation of the effects of metal-ion assisted-coordination of template molecule

Peptide-crosslinked molecularly imprinted polymers for efficient separation of immunoglobulin G from human serum

Low-cost and highly effective methods are highly desirable to replace the costly ethanol fractionation and affinity chromatography in IgG isolation from human plasma. Molecularly imprinted polymers (MIPs) of IgG are potential candidates, however, they still suffer from severe problems such as difficult template removal and low imprinting efficiency. Here, a recently developed strategy was adopted to overcome these problems. The MIPs were synthesized using poly(L-glutamic acid) (PLGA) peptide crosslinkers instead of commonly used crosslinkers, such as N,N-methylenebisacrylamide (BIS). Because of the pH-induced helix-coil transition and the precise folding of the peptide segments in the polymers, the imprint cavities can be enlarged by adjusting the pH from 5.0 to 7.0, but their original size and shape are restored when the pH is adjusted back. Therefore, the IgG template can be eluted completely under mild conditions, and significantly improved imprinting efficiency can be achieved. Compared with BIS-crosslinked MIP, 8.6 times more binding sites can be created by molecular imprinting PLGA-crosslinked MIP. The factors influencing the performance of the MIP were studied systematically. An optimized MIP with a high adsorption capacity (612.5 mg g^-1), high IF (4.92), and high selectivity was obtained. The adsorption capacity and selectivity of the MIP are much higher than the previously reported IgG MIPs. Because of its high adsorption capacity and selectivity, it can separate IgG from human serum effectively, affording high purity products.

Rabbit IgG-imprinted nanoMIPs by solid phase synthesis: the effect of cross-linkers on their affinity and selectivity

Solid phase synthesis (SPS) of molecularly imprinted nanopolymers (nanoMIPs) represents an innovative method to prepare nanomaterials with tailor-made molecular recognition properties towards peptides and proteins. The synthesis of nanoMIPs by SPS usually involves a pre-polymerization formulation, where the cross-linker is invariably N,N'-methylen-bis-acrylamide (BIS). To date, the effect of cross-linkers on the binding properties of nanoMIPs prepared using cross-linkers other than BIS has never been reported. In this work, in order to investigate the effect of different cross-linkers in protein-imprinted nanoMIPs prepared by SPS, alongside BIS we considered other similar cross-linkers: N,N'-ethylene dimethacrylamide (EDAM), N,O-bis-methacryloylethanolamine (NOBE), ethylene glycol dimethacrilate (EDMA) and glycerol dimethacrylate (GDMA), replacing BIS with them in pre-polymerization mixtures. The synthetized nanoMIPs were homogeneous, with a polydispersity index of 0.24-0.30 and a mean diameter of 129-169 nm in water. The binding properties of the nanoMIPs were measured via equilibrium partition experiments with the template, rabbit IgG (RIgG), and the selectivity was evaluated with respect to bovine IgG (BIgG), bovine serum albumin (BSA) and hen egg lysozyme (LZM). The experimental results show that all the cross-linkers, with the exception of EDMA, endowed nanoMIPs with high binding affinities for the template (BIS: 16.0 × 10⁶ mol^-1 L, EDAM: 8.8 × 10⁶ mol^-1 L, NOBE: 15.8 × 10⁶ mol^-1 L, and GDMA: 12.8 × 10⁶ mol^-1 L), medium to high imprinting factors (BIS: 12.3, EDAM: 5.5, NOBE: 7.2, and GDMA: 11.6) and good selectivity towards other proteins but markedly dependent on the structure of the cross-linker, confirming the importance of the latter in the SPS of imprinted nanopolymers.

Challenges and Advances in the Fabrication of Monolithic Bioseparation Materials and their Applications in Proteomics Research

High-performance liquid chromatography integrated with tandem mass spectrometry (HPLC-MS/MS) has become a powerful technique for proteomics research. Its performance heavily depends on the separation efficiency of HPLC, which in turn depends on the chromatographic material. As the "heart" of the HPLC system, the chromatographic material is required to achieve excellent column efficiency and fast analysis. Monolithic materials, fabricated as continuous supports with interconnected skeletal structure and flow-through pores, are regarded as an alternative to particle-packed columns. Such materials are featured with easy preparation, fast mass transfer, high porosity, low back pressure, and miniaturization, and are next-generation separation materials for high-throughput proteins and peptides analysis. Herein, the recent progress regarding the fabrication of various monolithic materials is reviewed. Special emphasis is placed on studies of the fabrication of monolithic capillary columns and their applications in separation of biomolecules by capillary liquid chromatography (cLC). The applications of monolithic materials in the digestion, enrichment, and separation of phosphopeptides and glycopeptides from biological samples are also considered. Finally, advances in comprehensive 2D HPLC separations using monolithic columns are also shown.

Synthesis of Molecularly Imprinted Cryogels to Deplete Abundant Proteins from Bovine Serum

Molecularly imprinted polyacrylamide cryogels were synthesized with pending templates (bovine serums of different concentrations). As the serum concentrations increased in the monomer solutions, the resulting cryogels could adsorb and deplete more proteins from serum samples. Due to the addition of vinyltriethoxysilane (VTEOS) in the prepolymerizing solutions, the polymers came as organic⁻inorganic hybrid materials. It endued the silica-modified amphoteric polyacrylamide cryogels with improved mechanical strengths. Scanning electron micrography (SEM), Infrared (IR) spectrometry, thermogravimetry-differential thermal analysis (TG-DTA), and X-ray photoelectron spectroscopy (XPS) were carried out to characterize these macroporous polymers. Amphoteric cryogels proved to be favorable materials recognizing and binding proteins. When used as liquid chromatography stationary phases, they were capable of simultaneously adsorbing various serum proteins. Electrophoresis showed that abundant proteins were gradually depleted by the cryogels prepared from increased ratios of bovine serums in the monomer solutions. As abundant proteins are always imprinted first, this sample per se imprinting method provides an effective and convenient way to deplete abundant proteins from complex samples such as serums, meanwhile concentrating and collecting scarce species therein.

Preparation of imprinted cryogel cartridge for chiral separation of l-phenylalanine

l-Phe-imprinted cryogel cartridge was prepared for the chiral separation of l-Phe. N-Methacryloyl l-phenylalanine (MAPA) was used as a functional monomer for complexing with l-Phe. The selectivity of the membranes was investigated by using d-Phe, l-Trp, and d-Trp as competitor molecules. The PHEMAPA-l-Trp membranes were 6.4, 4.3, and 5.5 times more selective for l-Phe than d-Phe, l-Trp, and d-Trp, respectively. The PHEMAPA-l-Phe cryogel cartridge was incorporated into the fast protein liquid chromatography (FPLC) equipment and was able to separate D,l-Phe racemic mixture efficiently. The PHEMAPA-l-Phe membranes were shown to be reusable many times without significant loss of the adsorption capacity.

Self-oriented nanoparticles for site-selective immunoglobulin G recognition via epitope imprinting approach

Molecular imprinting is a polymerization technique that provides synthetic analogs for template molecules. Molecularly imprinted polymers (MIPs) have gained much attention due to their unique properties such as selectivity and specificity for target molecules. In this study, we focused on the development of polymeric materials with molecular recognition ability, so molecular imprinting was combined with miniemulsion polymerization to synthesize self-orienting nanoparticles through the use of an epitope imprinting approach. Thus, L-lysine imprinted nanoparticles (LMIP) were synthesized via miniemulsion polymerization technique. Immunoglobulin G (IgG) was then bound to the cavities that specifically formed for L-lysine molecules that are typically found at the C-terminus of the Fc region of antibody molecules. The resulting nanoparticles makes it possible to minimize the nonspecific interaction between monomer and template molecules. In addition, the orientation of the entire IgG molecule was controlled, and random imprinting of the IgG was prevented. The optimum conditions were determined for IgG recognition using the imprinted nanoparticles. The selectivity of the nanoparticles against IgG molecules was also evaluated using albumin and hemoglobin as competitor molecules. In order to show the self-orientation capability of imprinted nanoparticles, human serum albumin (HSA) adsorption onto both the plain nanoparticles and immobilized nanoparticles by anti-human serum albumin antibody (anti-HSA antibody) was also carried out. Due to anti-HSA antibody immobilization on the imprinted nanoparticles, the adsorption capability of nanoparticles against HSA molecules vigorously enhanced. It is proved that the oriented immobilization of antibodies was appropriately succeeded.

Surface imprinting approach for preparing specific adsorbent for IgG separation

In this study, we focused our attention on preparing of a new adsorbent for specific separation of immunoglobulin G (IgG). In this respect, we applied core-shell surface imprinting approach. Silica microspheres were selected as core-material to prepare specific surface imprinted polymer against IgG. Silica surface was activated via acidic treatment and modified with 3-methacryloyloxypropyl trimethoxysilane (MPTMS). Then, IgG molecules were imprinted on the surface of microspheres by using N-methacryloyl-L-aspartic acid as complexing/functional monomer. The core-shell silica microspheres were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermo gravimetric analysis and zeta size analysis. Then, the microspheres were used for the separation of IgG from aqueous solution to evaluate/optimize conditions. The effect of parameters such as concentration, pH, ionic strength, and temperature on the separation of IgG were evaluated in their relevant ranges. The maximum IgG adsorption capacities of IgG-imprinted and non-imprinted core-shell silica microspheres were found to be 15.43 and 9.43 mg/g, respectively, at pH 6.0 phosphate buffer. 1.0 M NaCl was used as a desorption agent. Selectivity of the imprinted microspheres was also investigated by using human serum albumin and haemoglobin as competitor molecules.

Affinity-recognition-based polymeric cryogels for protein depletion studies

Supermacroporous cryogels can be used for the depletion of highly abundant proteins prior to proteome investigations.

One-dimensional surface-imprinted polymeric nanotubes for specific biorecognition by initiated chemical vapor deposition (iCVD)

Molecular imprinting is a powerful, generic, and cost-effective technique; however, challenges still remain related to the fabrication and development of these systems involving nonhomogeneous binding sites, insufficient template removing, incompatibility with aqueous media, low rebinding capacity, and slow mass transfer. The vapor-phase deposition of polymers is a unique technique because of the conformal nature of coating and offers new possibilities in a number of applications including sensors, microfluidics, coating, and bioaffinity platforms. Herein, we demonstrated a simple but versatile concept to generate one-dimensional surface-imprinted polymeric nanotubes within anodic aluminum oxide (AAO) membranes based on initiated chemical vapor deposition (iCVD) technique for biorecognition of immunoglobulin G (IgG). It is reported that the fabricated surface-imprinted nanotubes showed high binding capacity and significant specific recognition ability toward target molecules compared with the nonimprinted forms. Given its simplicity and universality, the iCVD method can offer new possibilities in the field of molecular imprinting.

Simultaneous depletion of immunoglobulin G and albumin from human plasma using novel monolithic cryogel columns

In this study, we aimed to develop an alternative matrix able to deplete the albumin (Alb) and immunoglobulin G (IgG) from blood plasma simultaneously to prepare plasma samples for large-scale applications of blood-related proteomics. As a first step, nano-protein A nanoparticles (nanoProA) were prepared and characterized. Subsequently, cibacron blue F3GA (CB) was immobilized onto the nanoProA's to enhance their specific affinity for Alb molecules. Finally, both nanoparticles, specifically, nanoProA and CB-nanoProA, were separately embedded into cryogel structures to combine advantages of the nanoparticles with those of the cryogels. The protein adsorption was optimized using aqueous Alb and IgG solutions separately. Subsequently, competitive protein adsorption was performed using a protein mixture prepared with Alb and IgG adhering to their plasma protein ratios. Because of the CB-immobilization, the Alb depletion performance of the cryogels increased whereas the IgG depleting performance decreased. Using the nanoProA, embedded cryogel removed 99.3% of the IgG, while using the CB-nanoProA embedded cryogel removed 97.5% of the Alb content. The simultaneous depletion performances of the cryogels for Alb and IgG were characterized using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. In this study, the monolithic cryogel-based adsorbents were classified as an alternative matrix to prepare plasma samples for proteomics applications at the preparative scale.