Fabrication and characterization of an ion-imprinted membrane via blending poly(methyl methacrylate- co -2-hydroxyethyl methacrylate) with polyvinylidene fluoride for selective adsorption of Ru(III)

Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

Synthesis & fabrication of O-linked polymeric hybrids for recovery of textile dyes: Closed loop economy

Dyes are an important resource employed for the production systems in textile, paper, paint and leather industry. An estimate of 200,000 tons of dyes are discharged as textile effluent each year worldwide. It becomes imperative to recover these dyes by treating the effluents using economically viable routes. The present research was undertaken with the objective to attain zero emission and zero waste through development of novel polymeric hybrids as adsorbents. For this purpose, metal moieties (Al3+, Si4+, Ti4+ and Zr4+) were hybridized with polyacrylic acid, and cellulose acetate for the uptake of selected dyes under optimized parameters. The structural elucidation of four synthesized hybrids (MP-Al, MP-Si, MP-Ti and MP-Zr) by FTIR, EDX and TGA confirmed O-linked grafting of metal moieties with polymers and thermally stable porous materials. SEM micrographic images displayed void spaces providing channels for effective adsorption. The batch experiments demonstrated removal of malachite green (77-96%) and congo red (70-82%) upon contact of initial 45 min on polymeric hybrids On the other hand, pristine polyacrylic acid and cellulose acetate showed remarkably low removal of dyes. The adsorption mechanism is proposed as physical in nature following type II isotherm. Further, Langmuir and Ho's pseudo second order fitness was evaluated. In order to determine the economic viability of the present research, the real textile dyes were recovered in three consecutive cycles of adsorption and chemical treatment of hybrids. The results propose a system with positive impact on economy by maximum utilization of hybrids as adsorbents and recovery of textile dyes for reuse in textile processing.

Ion-Imprinted Polymeric Materials for Selective Adsorption of Heavy Metal Ions from Aqueous Solution

The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided.

Highly Efficient Recovery of Ruthenium from Aqueous Solutions by Adsorption Using Dibenzo-30-Crown-10 Doped Chitosan

Ruthenium, as an industrial by-product or from natural sources, represents an important economical resource due to its specific applications. A complex problem is represented by ruthenium separation during reprocessing operations, therefore, different materials and methods have been proposed. The present study aims to develop a new material with good adsorbent properties able to be used for ruthenium recovery by adsorption from aqueous solutions. Absorbent material was obtained using chitosan (Ch) surface modification with dibenzo-30-crown-10 ether (DB30C10). Chitosan represents a well-known biopolymer with applicability in different adsorptive processes due to the presence of hydroxyl-, carboxyl-, and nitrogen-containing groups in the structure. Additionally, crown ethers are macromolecules with a good complexation capacity for metallic ions. It is expected that the adsorptive efficiency of newly prepared material will be superior to that of the individual components. New synthesized material was characterized using scanning electron microscopy coupled with energy dispersive X-ray (SEM–EDX), Fourier transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller surface area analysis (BET), and determination of point of zero charge (pZc). Results obtained from the performed kinetic, thermodynamic, and equilibrium studies confirmed the good adsorptive capacity of the prepared material, Ch-DB30C10, obtaining a maximum adsorption capacity of 52 mg Ru(III) per gram. This adsorption capacity was obtained using a solution with an initial concentration of 275 mg L−1, at pH 2, and 298 K. Ru(III) adsorption kinetics were studied by modeling the obtained experimental data with pseudo-first order and pseudo-second order models. Desorption studies established that the optimum eluent was represented by the 5M HNO3 solution. Based on the performed studies, a mechanism for recovery of ruthenium by adsorption was proposed.

Smart ion imprinted polymer for selective adsorption of Ru(Ⅲ) and simultaneously waste sample being transformed as a catalyst

In this work, a temperature-sensitive block polymer PDEA-b-P(DEA-co-AM) was synthesized and then introduced into the preparation of a smart Ru(Ⅲ) imprinted polymer (Ru-IIP) to selectively adsorption Ru(Ⅲ) first. Then the waste Ru-IIP was converted into a catalyst in-situ for recycle. The structure and morphology of the prepared polymer were characterized by Fourier transform infrared spectrometer, Scanning electron microscope, BET surface area and Thermogravimetric analysis. The adsorption properties of the synthesized smart material were investigated in terms of adsorption pH, adsorption kinetics and adsorption isotherm. Results documented that the optimal adsorption temperature and pH were 35 °C and 1.5 respectively, the maximum adsorption capacity was 0.153 mmol/g, and the adsorption processes of Ru-IIP were more suitable to be expressed by pseudo-first-order kinetic and Langmuir model. The selectivity studied in different binary mixed solutions showed that Ru-IIP has good selectivity, and reusability results showed that Ru-IIP still maintains a good adsorption effect after 8 cycles. In addition, the waste Ru-IIP, a Ru(Ⅲ) remained waste sample was employed as the catalyst for the synthesis of imines, and result showed the mass of adsorbent would reduce after the completion of catalysis, which could not only catalyze the reaction but also reduce pollution.

Molecular Imprinting: Green Perspectives and Strategies

Advances in revolutionary technologies pose new challenges for human life; in response to them, global responsibility is pushing modern technologies toward greener pathways. Molecular imprinting technology (MIT) is a multidisciplinary mimic technology simulating the specific binding principle of enzymes to substrates or antigens to antibodies; along with its rapid progress and wide applications, MIT faces the challenge of complying with green sustainable development requirements. With the identification of environmental risks associated with unsustainable MIT, a new aspect of MIT, termed green MIT, has emerged and developed. However, so far, no clear definition has been provided to appraise green MIT. Herein, the implementation process of green chemistry in MIT is demonstrated and a mnemonic device in the form of an acronym, GREENIFICATION, is proposed to present the green MIT principles. The entire greenificated imprinting process is surveyed, including element choice, polymerization implementation, energy input, imprinting strategies, waste treatment, and recovery, as well as the impacts of these processes on operator health and the environment. Moreover, assistance of upgraded instrumentation in deploying greener goals is considered. Finally, future perspectives are presented to provide a more complete picture of the greenificated MIT road map and to pave the way for further development.

Antifouling Membranes Based on Cellulose Acetate (CA) Blended with Poly(acrylic acid) for Heavy Metal Remediation

Fouling has been widely recognized as the Achilles’ heel of membrane processes and the growing perception about the relevance of this critical issue has driven the development of advanced antifouling strategies. Herein, novel fouling-resistant ultrafiltration (UF) membranes for Cadmium (Cd) remediation were developed via a blending method by combining the flexibility of cellulose acetate (CA) with the complex properties of poly(acrylic acid) (PAA). A systematic characterization, based on differential scanning calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR), confirmed the homogeneity of the blend favored by hydrogen interconnections between CA and PAA polymeric chains. The concentration of PAA with respect to CA played a key role in tuning the morphology and the hydrophilic character of the novel UF membranes prepared via non-solvent-induced phase separation (NIPS). UF experiments revealed the tremendous advantages of the blend since CA/PAA membranes showed superior performance with respect to the neat CA membrane in terms of (i) water permeability; (ii) Cd rejection; and (iii) antifouling resistance to humic acid (HA). Concisely, the increasing of the concentration of PAA in the casting solution was found to be beneficial to improve the flux recovery ratio (FRR) coupled with the decline of the total fouling ratio (Rt). Overall, PAA is an effective additive to prepare CA membranes with enhanced antifouling properties exploitable for the remediation of water bodies contaminated by heavy metals via UF process.

Insight into carbohydrate polymers (chitosan and 2- hydroxyethyl methacrylate/methyl methacrylate) intercalated bentonite-based nanocomposites as multifunctional and environmental adsorbents for methyl parathion pesticide

Two-hybrid products of bentonite intercalated carbohydrate polymers (chitosan (BE.P.CH) and 2- hydroxyethyl methacrylate/methyl methacrylate copolymer (BE/P.HEMA/MMA)) were synthesized as enhanced adsorbents for methyl parathion pesticide (MPP). The intercalation processes induced the affinity and the capacity of bentonite achieving the best value at pH 8. The maximum MPP adsorption capacities of BE (287.3 mg/g), BE/P.CH (634.5 mg/g), and BE/P.HEMA-MMA (868.5 mg/g) obtained after 300 min, 240 min, and 360 min, respectively. The kinetic properties of BE follow the Pseudo-second order behavior (R² = 0.93) while BE/P.CH and BE/P.HEMA-MMA are of Pseudo-First order behavior (R² > 0.92). Based on the equilibrium studies, the three products are of Freundlich isotherm behavior (R² > 0.9) and the uptake is of multilayer forms on heterogeneous surfaces. The Gaussian energies (>8 KJ/mol), Gibbs free energies (>20 to <40 KJ/mol), and enthalpies (>40 to <80 KJ/mol) give an indication about adsorption mechanism involved chemical and physical reactions. The thermodynamics of MPP uptake reactions by the three products are of endothermic and spontaneous behaviors. The MPP uptake in the presence of NH⁺⁴, PO₄^-3, Mn⁺², and Pb⁺² competitive ions reflects enhancement in the affinity of BE after the integration between it and the selected polymers.

Insight into the Adsorption and Photocatalytic Behaviors of an Organo-bentonite/Co3O4 Green Nanocomposite for Malachite Green Synthetic Dye and Cr(VI) Metal Ions: Application and Mechanisms

A green composite of organically modified bentonite supported by Co3O4 nanoparticles (OB/Co) was successfully fabricated and investigated as a potential eco-friendly, low-cost adsorbent and photocatalyst for promising removal of both malachite green dye (MG.D) and Cr(VI) ions. The composite showed high adsorption properties and achieved experimental q max values of 223 and 139 mg/g for MG.D and Cr(VI) after equilibration times of 360 min and 480 min for the inspected contaminants, respectively. The kinetic and equilibrium inspection reflected the best description of their adsorption behaviors by the pseudo-first-order kinetic model and the Langmuir isotherm model, respectively. This revealed favorable and homogeneous uptake of both MG.D and Cr(VI) in a monolayer form with theoretical Langmuir q max values of 343.6 and 194.5 mg/g, respectively. The theoretical adsorption energies of MG.D (0.6 kJ/mol) and Cr(VI) (0.5 kJ/mol) from the Dubinin-Radushkevich (D-R) model revealed physisorption properties that might be resulted from some types of Coulombic attractive forces, achieving theoretical q max values of 226.5 and 144.6 mg/g, respectively. The suggested adsorption mechanism was confirmed by the main mathematical parameters of thermodynamic studies that revealed physical, spontaneous, and exothermic uptake processes. Also, the composite showed high photocatalytic performance under visible light, which resulted in a 100% removal percentage of 100 mg/L of MG.D and Cr(VI) after about 180 and 240 min, respectively, from the adsorption equilibrium time.

Preparation and performance of poly(4-vinylpyridine)-b-polysulfone-b-poly(4-vinylpyridine) triblock copolymer/polysulfone blend membrane for separation of palladium (II) from electroplating wastewaters

In order to separate palladium (II) from electroplating wastewaters, poly(4-vinylpyridine)-b-polysulfone-b-poly(4-vinylpyridine) (P4VP-PSF-P4VP) / polysulfone blend membranes were fabricated by combining non-solvent induced phase separation, surface segregation and self-assembly of block copolymer. Amphiphilic P4VP-PSF-P4VP was used as the membrane base material, which was synthesized by introducing the functional monomer of 4-vinylpyridine (4-VP), and polysulfone as the additive. Effects of blend ratio and 4-VP content on membrane performance, such as structure, hydrophilicity, pure water flux and adsorption capacity towards Pd (II), were investigated. The membranes exhibited dense surface structure and low roughness due to surface segregation and self-assembly of P4VP-PSF-P4VP. The presence of 4-VP increased hydrophilicity and water flux of membrane, and it also provided good adsorption capacity towards Pd (II) (up to 103.1 ± 5.15 mg/g). Further, the membrane was used to separate Pd (II) from simulated wastewaters during filtration. It showed good rejection ability and high selectivity towards Pd (II) in co-existence of Cu (II) and Ni (II), and selectivity coefficients of Pd/Cu and Pd/Ni are 41.9 ± 1.88 and 97.8 ± 4.32, respectively. In filtration process of actual electroplating wastewater, the membrane also exhibited excellent rejection performance (Pd (II) rejection reached up to 96.8 ± 2.71%). Perhaps it is suitable for future practice applications.