Poly(N,N-dimethylaminoethyl methacrylate) for removing chromium (VI) through polymer-enhanced ultrafiltration technique

Comparative Study of the Removal Efficiency of Nalidixic Acid by Poly[(4-vinylbenzyl)trimethylammonium Chloride] and N-Alkylated Chitosan through the Ultrafiltration Technique and Its Approximation through Theoretical Calculations

Emerging antibiotic contaminants in water is a global problem because bacterial strains resistant to these antibiotics arise, risking human health. This study describes the use of poly[(4-vinylbenzyl) trimethylammonium chloride] and N-alkylated chitosan, two cationic polymers with different natures and structures to remove nalidixic acid. Both contain ammonium salt as a functional group. One of them is a synthetic polymer, and the other is a modified artificial polymer. The removal of the antibiotic was investigated under various experimental conditions (pH, ionic strength, and antibiotic concentration) using the technique of liquid-phase polymer-based retention (LPR). In addition, a stochastic algorithm provided by Fukui's functions is used. It was shown that alkylated N-chitosan presents 65.0% removal at pH 7, while poly[(4-vinylbenzyl)trimethylammonium chloride] removes 75.0% at pH 9. The interaction mechanisms that predominate the removal processes are electrostatic interactions, π-π interactions, and hydrogen bonding. The polymers reached maximum retention capacities of 1605 mg g-1 for poly[(4-vinylbenzyl) trimethylammonium chloride] and 561 mg g-1 of antibiotic per gram for alkylated poly(N-chitosan). In conclusion, the presence of aromatic groups improves the capacity and polymer-antibiotic interactions.

Removal of Antimony(III) and Antimony(V) from water samples through water-soluble polymer-enhanced ultrafiltration

Addressing antimony (Sb) contamination, which is caused by the use of Sb compounds in various industries, is crucial. This study aims to compare two different Sb removal mechanisms: ion exchange and chelation. Therefore, two different water-soluble polymers-glycidyl methacrylate-N-methyl-D-glucamine and poly 2-(acryloyloxy)ethyl trimethylammonium chloride-were synthesized and used to remove Sb(III) and Sb(V) using the polymer-enhanced ultrafiltration (PEUF) method. The removal of Sb(III) was pH-dependent and extremely difficult at a pH of 1.2. However, when the pH of the solution was increased to 11, the Sb(III) removal rate increased to 77%. The Sb(III) removal rate was 28% at an Sb(III):polymer mole ratio of 1:5, which increased to 77% at a mole ratio of 1:20. Sb(III) removal was discovered to be unaffected by the low concentrations of Na⁺, K⁺, Ca²⁺, and Mg²⁺ ions in the solution, maintaining a Sb(III) removal rate of 77%. The test parameters showed different characteristics for Sb(V) removal. Increasing the pH of the solution from 1 to 9 correspondingly increased the removal rate from 0% to 45%, but increasing it further to 11 decreased the removal rate to 14%. The removal rate of Sb(V) was 67% at a Sb(V):polymer mole ratio of 1:60. Sb(V) removal was discovered to be unaffected by low concentrations of SO₄^2-, NO₃^-, and PO₄^3- anions in the solution. However, notably, the Sb(V) removal rate decreased from 67% to 58% in the presence of Cl^- ions. The results demonstrate that Sb removal via chelation was more effective than by ion exchange, and it remained unaffected by the presence of interfering ions.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Water treatment using stimuli-responsive polymers

Stimuli-responsive polymers are a new category of smart materials used in water treatment via a stimuli-induced purification process and subsequent regeneration processes.

Removal of Dyes by Polymer-Enhanced Ultrafiltration: An Overview

The current problem of contamination caused by colored industrial effluents has led to the development of different techniques to remove these species from water. One of them, polymer-enhanced ultrafiltration (PEUF), has been systematically studied in this mini review, in which research works from 1971 to date were found and analyzed. Dye retention rates of up to 99% were obtained in several cases. In addition, a brief discussion of different parameters, such as pH, interfering salts, type of polymer, dye concentration, and membrane type, and their influence in dye removal is presented. It was concluded from the above that these factors can be adapted depending on the pollutant to be remediated, in order to optimize the process. Finally, theoretical approaches have been used to understand the intermolecular interactions, and development of the studied technique. In this revision, it is possible to observe that molecular docking, molecular dynamics simulations, density functional theory calculations, and hybrid neural-genetic algorithms based on an evolutionary approach are the most usual approximations used for this purpose. Herein, there is a detailed discussion about what was carried out in order to contribute to the research development of this important science field.

Pressure-Driven Membrane Process: A Review of Advanced Technique for Heavy Metals Remediation

Pressure-driven processes have come a long way since they were introduced. These processes, namely Ultra-Filtration (UF), Nano-Filtration (NF), and Reverse-Osmosis (RO), aim to enhance the efficiency of wastewater treatment, thereby aiming at a cleaner production. Membranes may be polymeric, ceramic, metallic, or organo-mineral, and the filtration techniques differ in pore size from dense to porous membrane. The applied pressure varies according to the method used. These are being utilized in many exciting applications in, for example, the food industry, the pharmaceutical industry, and wastewater treatment. This paper attempts to comprehensively review the principle behind the different pressure-driven membrane technologies and their use in the removal of heavy metals from wastewater. The transport mechanism has been elaborated, which helps in the predictive modeling of the membrane system. Fouling of the membrane is perhaps the only barrier to the emergence of membrane technology and its full acceptance. However, with the use of innovative techniques of fabrication, this can be overcome. This review is concluded with perspective recommendations that can be incorporated by researchers worldwide as a new problem statement for their work.

Electrochemical reduction of Cr(VI) in the presence of sodium alginate and its application in water purification

Chromium (Cr) is used in many manufacturing processes, and its release into natural waters is a major environmental problem today. Low concentrations of Cr(VI) are toxic to human health and living organisms due to the carcinogenic and mutagenic nature of this mineral. This work examined the conversion of Cr(VI) to Cr(III) via electrochemical reduction using gold electrode in an acidic sodium alginate (SA) solution and subsequent removal of the produced Cr(III)-SA by the polymer-enhanced ultrafiltration (PEUF) technique. A solution of SA in nitric acid was used both as an electrolytic medium during the voltammetric measurements and bulk electrolysis and as an extracting agent during the PEUF technique. The electroanalysis of Cr(VI) was performed by linear sweep voltammetry in the presence of acidic SA solution to study its voltammetric behavior as a function of the Cr(VI) concentration, pH, presence of Cr(III), SA concentration and scan rate. In addition, the quantitative reduction of Cr(VI) to Cr(III) was studied through the bulk electrolysis technique. The results showed efficient reduction with well-defined peaks at approximately 0.3 V vs. Ag/AgCl, using a gold working electrode. As the pH increased, the reduction signal strongly decreased until its disappearance. The optimum SA concentration was 10 mmol/L, and it was observed that the presence of Cr(III) did not interfere in the Cr(VI) electroanalysis. Through the quantitative reduction by bulk electrolysis in the presence of acidic SA solution, it was possible to reduce all Cr(VI) to Cr(III) followed by its removal via PEUF.

Removal of chromium ions by functional polymers in conjunction with ultrafiltration membranes

In the current research water-soluble functional polymers (WSFP) were prepared via radical polymerization and purified by fractionation through ultrafiltration membranes with different molecular weights cut off (MWCO) of 30 and 100 kDa. The WSFPs were poly(3-acrylamide propyl) trimethyl ammonium chloride, P(ClAPTA), poly(2-acrylamido-2-methyl-1-propane sodium sulfonate, P(AMPSNa), and poly(3-methacrylamino propyl) dimethyl 3-sulfopropyl ammonium hydroxide, P(HMPDSPA). These polymers were characterized by Fourier transformed infrared spectroscopy (FT-IR) and thermogravimetry analysis (TGA). Using liquid-phase polymer-based retention technique (LPR), chromium [Cr(III) and Cr(VI)] retention was studied as a function of pH, polymer and chromium concentration, selectivity, maximum retention capacity, chromium elution capacity, and polymer regeneration through sorption and desorption studies. Results of FT-IR showed the characteristic absorption bands of the synthesized polymers. The decomposition temperatures of P(ClAPTA) were at 303.1 °C, and for P(AMPSNa) three decompositions temperatures were registered at 190.5 °C, 223.2 °C, and 304.8 °C. P(HMPDSPA) presented two important decomposition temperatures at 292.4 °C and 391.7 °C, respectively. Concerning to the retention of Cr(VI), it was maximal (100 %) when P(ClAPTA) was studied at pH 6. The maximum retention of Cr(III) (100 %) was achieved by P(AMPSNa) at pH 3. The optimum polymer:Cr mole ratio obtained was 10:1 for both Cr(VI) and Cr(III). The retention of Cr(VI) decreased due to the presence of interfering ions, and the hydrodynamic flow was almost constant during the ultrafiltration of polymer-Cr macromolecule.

Contribution of Cross-Linker and Silica Morphology on Cr(VI) Sorption Performances of Organic Anion Exchangers Embedded into Silica Pores

Removal of Cr(VI) from the environment represents a stringent issue because of its tremendous effects on living organisms. In this context, design of sorbents with high sorption capacity for Cr(VI) is getting a strong need. For this purpose, poly(vinylbenzyl chloride), impregnated into porous silica (PSi), was cross-linked with either N,N,N',N'-tetramethyl-1,2-ethylenediamine (TEMED) or N,N,N',N'-tetramethyl-1,3-propanediamine, followed by the reaction of the free -CH2Cl groups with N,N-diethyl-2-hydroxyethylamine to generate strong base anion exchangers (ANEX) inside the pores. The PSi/ANEX composite sorbents were deeply characterized by FTIR spectroscopy, SEM-energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), and water uptake. The sorption performances of composites against Cr(VI) were investigated as a function of pH, contact time, initial concentration of Cr(VI), and temperature. It was found that the cross-linker structure and the silica morphology are the key factors controlling the sorption capacity. The adsorption process was spontaneous and endothermic and well described by pseudo-second-order kinetic and Sips isotherm models. The maximum sorption capacity of 311.2 mg Cr(VI)/g sorbent was found for the composite prepared with mesoporous silica using TEMED as cross-linker. The PSi/ANEX composite sorbents represent an excellent alternative for the removal of Cr(VI) oxyanions, being endowed with fast kinetics, equilibrium in about 60 min, and a high level of reusability in successive sorption/desorption cycles.

Magnetic nanoparticles coated with aminated polymer brush as a novel material for effective removal of Pb(II) ions from aqueous environments

In the present study, a poly (vinylbenzyl chloride) grafted Fe₃O₄ nanoparticle (Fe₃O₄@PVBC) was prepared by surface-initiated reversible addition fragmentation chain transfer (SI-RAFT) polymerization and subsequently coated with tris (aminoethyl) amine (TAEA). Then, Fe₃O₄@PVBC-TAEA nanoparticles were utilized as a novel adsorbent for removal of Pb(II) from aqueous media and optimal adsorption conditions were determined with response surface methodology (RSM). The used adsorbent was characterized by using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). RSM with central composite design (CCD) was carried out to evaluate the effect of initial pH, initial Pb(II) concentration (C₀, mg/L), adsorbent dosage (mg), and contact time (min). The optimum initial pH, C₀, adsorbent dosage, and contact time were found to be 5.88, 46.51 mg/L, 17.41 mg, and 108.21 min, respectively. The maximum removal efficiency and adsorption capacity were 97.07% and 129.65 mg/g under these conditions, respectively. The kinetic data revealed that the adsorption mechanism could be best explained by the pseudo-second-order and Weber-Morris models. The isotherm studies found that both the Langmuir and Freundlich isotherm models fitted the experimental data well. The thermodynamic analysis indicated that the adsorption nature is exothermic, applicable, and spontaneous.