Glycidol-functionalized macroporous polymer for boron removal from aqueous solution

Boron Removal in Aqueous Solutions Using Adsorption with Sugarcane Bagasse Biochar and Ammonia Nanobubbles

Boron is a naturally occurring trace chemical element. High concentrations of boron in nature can adversely affect biological systems and cause severe pollution to the ecological environment. We examined a method to effectively remove boron ions from water systems using sugarcane bagasse biochar from agricultural waste with NH3 nanobubbles (10% NH3 and 90% N2). We studied the effects of the boron solution concentration, pH, and adsorption time on the adsorption of boron by the modified biochar. At the same time, the possibility of using magnesium chloride and NH3 nanobubbles to enhance the adsorption capacity of the biochar was explored. The carbonization temperature of sugarcane bagasse was investigated using thermogravimetric analysis. It was characterized using XRD, SEM, and BET analysis. The boron adsorption results showed that, under alkaline conditions above pH 9, the adsorption capacity of the positively charged modified biochar was improved under the double-layer effect of magnesium ions and NH3 nanobubbles, because the boron existed in the form of negatively charged borate B(OH)4- anion groups. Moreover, cations on the NH3 nanobubble could adsorb the boron. When the NH3 nanobubbles with boron and the modified biochar with boron could coagulate each other, the boron was removed to a significant extent. Extended DLVO theory was adopted to model the interaction between the NH3 nanobubble and modified biochar. The boron adsorption capacity was 36 mg/g at room temperature according to a Langmuir adsorption isotherm. The adsorbed boron was investigated using FT-IR and XPS analysis. The ammonia could be removed using zeolite molecular sieves and heating. Boron in an aqueous solution can be removed via adsorption with modified biochar with NH3 nanobubbles and MgCl2 addition.

Recent advances in boron removal in aqueous media. An approach to the adsorption process and process optimization

The numerous oxidation states of the element boron bring great challenges in containing its contamination in receptor bodies. This scenario increases significantly due to the widespread use of boron compounds in various industries in recent years. For this reason, the removal of this contaminant is receiving worldwide attention. Although adsorption is a promising method in boron removal, finding suitable adsorbents, that is, those with high efficiency, and feasible remains a constant challenge. Hence, this review presents the boron removal methods in comparison to costs of adsorbents, reaction mechanisms, economic viability, continuous bed application, and regeneration capacity. In addition, the approach of multivariate algorithms in the solution of multiobjective problems can enable the optimized conditions of dosage of adsorbents and coagulants, pH, and initial concentration of boron. Therefore, this review sought to comprehensively and critically demonstrate strategic issues that may guide the choice of method and adsorbent or coagulant material in future research for bench and industrial scale boron removal.

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Increasing levels of boron in water exceeding acceptable thresholds have triggered concerns regarding environmental pollution and adverse health effects. In response, significant efforts are being made to develop new adsorbents for the removal of boron from contaminated water. Among the various materials proposed, inorganic adsorbents have emerged as promising materials due to their chemical, thermal, and mechanical stability. This review aims to comprehensively examine recent advances made in the development of inorganic adsorbents for the efficient removal of boron from water. Firstly, the adsorption performance of the most used adsorbents, such as magnesium, iron, aluminum, and individual and mixed oxides, are summarized. Subsequently, diverse functionalization methods aimed at enhancing boron adsorption capacity and selectivity are carefully analyzed. Lastly, challenges and future perspectives in this field are highlighted to guide the development of innovative high-performance adsorbents and adsorption systems, ultimately leading to a reduction in boron pollution.

Gelatin aerogel with good mechanical properties and adjustable physical properties for boron adsorption from salt lake brines: An optimized process

A composite aerogel with good mechanical properties and adjustable physical properties was synthesized by a sol-gel technique on the base of gelatin for the boron adsorption from water solution. The adsorption key variables, for instance, initial boron concentration (C0) (900-1100 mg/L), the contact time (t) (8-9 h), and pH (9-11), were optimized using central composite design to obtain improved boron adsorption performance of epichlorohydrin-modified gelatin (EMG)/N-methyl-d-glutamine (NMDG) aerogel loaded with hydroxylated carbon nanotubes (EMG@NMDG). The adsorption followed the pseudo-second-order and Freundlich model. At pH of 10, C0 of 1000 mg/L and t of 10 h, the largest adsorbed amount of EMG@NMDG was 85.79 mg/g. Regeneration experiments were carried out by eluting the adsorbent using HCl. The analysis showed that the adsorption in actual brine was 62.65 mg/g. Therefore, the developed EMG@NMDG aerogel has potential value for the boron extraction from brine and wastewater.

Hydrophilic magnetic Ti3C2Tx-based nanocomposite as an efficient boron adsorbent: Synthesis, characterization, and application

It is widely recognized that wastewater containing boron is an environmental issue. Therefore, the development of adsorbents with excellent adsorption capacity, stability, and recyclability is essential in water treatment applications. A Fe3O4/PDA/Ti3C2Tx/PEI/DHHA nanocomposite has been prepared that can be used to separate and recover boric acid by adjusting the pH of the solution, based on the affinity theory of boric acid and cis-diol. Through series characterization, it was determined that the adsorbent possessed good magnetic properties, high hydrophilicity and high loading capacities. In this study, 4-formylphenylboronic acid (FPBA) was selected as the model compound. The nanocomposite exhibited an adsorption equilibrium time of 10 h and an adsorption capacity of 98.99 mg/g at pH = 8.5 and 25 °C. The Langmuir isothermal model and the quasi-secondary kinetic model are both appropriate for describing the adsorption process. Thermodynamic results suggest that adsorption is a spontaneous chemisorption process. Furthermore, the nanocomposite retains good regeneration performance after five adsorption-desorption cycles.

Boron Adsorption Using NMDG-Modified Polypropylene Melt-Blown Fibers Induced by Ultraviolet Grafting

Boron is in high demand in many sectors, yet there are significant flaws in current boron resource utilization. This study describes the synthesis of a boron adsorbent based on polypropylene (PP) melt-blown fiber using ultraviolet (UV)-induced grafting of Glycidyl methacrylate (GMA) onto PP melt-blown fiber, followed by an epoxy ring-opening reaction with N-methyl-D-glucosamine (NMDG). Using single-factor studies, grafting conditions such as the GMA concentration, benzophenone dose, and grafting duration were optimized. Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and water contact angle were used to characterize the produced adsorbent (PP-g-GMA-NMDG). The PP-g-GMA-NMDG adsorption process was examined by fitting the data with different adsorption settings and models. The results demonstrated that the adsorption process was compatible with the pseudo-second-order model and the Langmuir model; however, the internal diffusion model suggested that the process was impacted by both extra- and intra-membrane diffusion. According to thermodynamic simulations, the adsorption process was exothermic. At pH 6, the greatest saturation adsorption capacity to boron was 41.65 mg·g^-1 for PP-g-GMA-NMDG. The PP-g-GMA-NMDG preparation process is a feasible and environmentally friendly route, and the prepared PP-g-GMA-NMDG has the advantages of high adsorption capacity, outstanding selectivity, good reproducibility, and easy recovery when compared to similar adsorbents, indicating that the reported adsorbent is promising for boron separation from water.

Preparation and Boron Removal Performance of Glycidol Modified PANI Nanorods: An Optimization Study Based on Response Surface Methodology

Boron removal from aqueous solutions has attracted increasing attention, offering benefits for animal and plant health as well as profound significance for exploiting Salt Lake boron resources. In this work, we synthesized novel glycidol-functionalized and hydrophilic polyaniline (PANI) nanorod adsorbents, which were prepared to separate boron compounds from boric acid aqueous solutions. The as-prepared adsorbents were significantly different from the traditional polymers' grafting reaction because they had a higher functional yield and more active position for adsorption. The maximum adsorption capacity (0.2210 mmoL∙g^-1) and optimal adsorption conditions (boric acid concentration of 1307 mg/L, pH = 9.82, time of 10 h) were obtained with single-factor experimentation and the response surface method (RSM). In addition, adsorption kinetics studies showed that the adsorption reaction belonged to the pseudo-first-order kinetic model, and diffusion was the key limiting factor; therefore, the adsorption equilibrium time is more than 10 h. Finally, the related possible adsorption mechanism was investigated based on the species and the diffusion of boron in the aqueous phase.

Magnetic Separation of Oxoacid of Boron from Salt-Lake Brine by Synergistically Enhanced Boron Adsorbents of Glucose-Functionalized SiO2 and Graphene

The adsorption separation and extraction of low-concentration boron from salt-lake brine have great significance. Magnetic separation avoids the problem of adsorbent granulation and improves the usage efficiency. The silicon-based adsorbents have attracted interest due to their superior acid and alkali resistance, in which polyhydroxy graphene enhances the adsorption of boron ions. Herein different boron adsorbents, derived by magnetic separation, were developed and characterized by SEM, TEM, XPS, VSM, FT-IR, and XRD analysis. The adsorption-desorption performance of boron adsorbents with different compositions was evaluated. The isotherms and kinetics parameters of the boron extraction were evaluated based on adsorption-desorption tests. The graphene-based magnetic adsorbent (Go-Fe3O4@SiO2@mSiO2-Glu) registered a high boron adsorption capacity of 23.90 mg/g at pH = 9 in the boron solution and 24.84 mg/g for East Taigener salt-lake brine. The Na+, Mg2+, Ca2+, and Cl− ions have little interference with the boron adsorption. The adsorbents exhibit magnetic separation performance and good cycle life. The results showed that acid-alkali desorption solution has little effect on the adsorbents, and the composite of graphene enhances the adsorption of boron ions. The adsorbents developed in this study are promising to recover boron from low-concentration boron-containing salt-lake brines.

Advances in Technologies for Boron Removal from Water: A Comprehensive Review

Boron overabundance in aquatic environment raises severe concerns about the environment and human health because it is toxic to various crops and induces many human and animal diseases with long-term consequences. In response to the boron pollution of water resources and the difficulty of eliminating boron from water for production and living purposes, this article summarizes the progress in research on boron removal technology, addressing the following aspects: (1) the reasons for the difficulty of removing boron from water (boron chemistry); (2) ecological/biological toxicity and established regulations; (3) analysis of different existing processes (membrane processes, resin, adsorption, chemical precipitation, (electric) coagulation, extraction, and combined methods) in terms of their mechanisms, effectiveness, and limitations; (4) prospects for future studies and possible improvements in applicability and recyclability. The focus of this paper is thus to provide a comprehensive summary of reported deboronation processes to date, which will definitely identify directions for the development of boron removal technology in the future.

Fabrication of Elastic Macroporous Polymers with Enhanced Oil Absorbability and Antiwaxing Performance

Porous polymers are of great interest in potential energy storage and environmental remediation applications. However, traditional fabrication methods are either time-consuming or energy-consuming and deteriorate the mechanical strength of polymer materials. In this study, polymerization-induced phase separation was used to realize the template-free fabrication of superflexible macroporous polymers. Since the solvent is also used as a porogen, this method can be widely used to synthesize several porous polymers by carefully choosing the solvent and monomer. Compared to nonstructured polymers, the prepared macroporous polymers exhibited enhanced mechanical strength, superflexibility, multicompressibility, and bending properties. Along with hydrophobicity/oleophilicity and macroporous structures, the as-prepared porous polymers demonstrated controllable oil absorbability and release; furthermore, after infusing with lubrication liquid, these materials can be used as antiwaxing materials. The elastic porous polymers prepared using this simple and universal method show great potential for various applications, including controlled drug release, antiwaxing, and lubrication.