Visible light-induced hydrogels towards reversible adsorption and desorption based on trivalent chromium in aqueous solution

Removal of trivalent chromium ions in model contaminated groundwater using hexagonal boron nitride as an adsorbent

The feasibility of using hexagonal boron nitride (h-BN) to treat heavy metal Cr(III) from model contaminated groundwater was evaluated in this study by adsorption experiments and characterizations. To the best of our knowledge, this study is the first attempt to conduct the adsorption of Cr(III) by h-BN under various experimental conditions such as exposure time, ratio of adsorbates and adsorbents, solution pH, background ions with different ionic strength, and the presence of humic acids (HA) in model contaminated groundwater. The optimized h-BN showed excellent maximum adsorption capacity (i.e., 177 mg ∙ g-1) when the concentrations of Cr(III) and h-BN were 10 and 10 mg ∙ L-1, respectively. Subsequently, we confirmed there was a negligible change in the adsorption performance of Cr(III) by h-BN in the presence of co-ions (i.e., K and Mg) in concentrations in a range from 50 to 1000 mg ∙ L-1. Furthermore, the adsorption performance of Cr(III) gradually improved with HA concentrations from 2.5 to 25 mg ∙ L-1. Interestingly, the maximum adsorption performance of Cr(III) by both HA and h-BN increased until 500 mg ∙ g-1 in the presence of 25 mg ∙ L-1 HA. The adsorption mechanism was clarified by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Additionally, we successfully confirmed that h-BN could be reused until five cycles. On the basis of the adsorption performance results and characterizations, h-BN can be utilized as an efficient and practical adsorbent to treat Cr(III) in groundwater treatment.

Adsorption of Co2+ and Cr3+ in Industrial Wastewater by Magnesium Silicate Nanomaterials

In this paper, two flower-like magnesium silicate nanomaterials were prepared. These and another two commercial magnesium silicate materials were characterized using a scanning electron microscope, the N2 adsorption-desorption method, and other methods. The structure-activity relationship between the adsorption performance of these four magnesium silicate materials and their specific surface area, pore size distribution, and pore structure was compared. The results showed that the 3-FMS modified by sodium dodecyl sulfonate (SDS) had the largest specific surface area and pore size, the best adsorption performance, and the largest experimental equilibrium adsorption capacity (qe,exp) for Co2+, reaching 190.01 mg/g, and Cr3+, reaching 208.89 mg/g. The adsorption behavior of the four materials for Co2+ and Cr3+ both fitted the pseudo-second-order kinetic model and Langmuir adsorption model, indicating that chemical monolayer uniform adsorption was the dominant adsorption process. Among them, the theoretical adsorption capacity (qm) of 3-FMS was the highest, reaching 207.62 mg/g for Co2+ and 230.85 mg/g for Cr3+. Through further research, it was found that the four materials mainly removed Co2+ and Cr3+ through electrostatic adsorption, surface metal ions (Mg2+), and acidic groups (-OH and -SO3H) exchanging with ions in solution. The adsorption performance of two self-made flower-like magnesium silicate materials for Co2+ and Cr3+ was superior to that of two commercial magnesium silicates.

Spiropyran-Based Soft Substrate with SPR, Anti-Reflection and Anti-NRET for Enhanced Visualization/Fluorescence Dual Response to Metal Ions

The photoluminescence of modified spiropyran on solid surfaces is poor, and the fluorescence intensity of its MC form is weak, which affects its application in the field of sensing. In this work, a PMMA layer containing Au nanoparticles and a spiropyran monomolecular layer are coated on the surface of a PDMS substrate with inverted micro-pyramids successively by means of interface assembly and soft lithography, and the overall structure is similar to insect compound eyes. The anti-reflection effect of the bioinspired structure, the SPR (surface plasmon resonance) effect of the Au nanoparticles and the anti-NRET (non-radiation energy transfer) effect of the PMMA isolation layer raise the fluorescence enhancement factor of the composite substrate vs. the surface MC form of spiropyran to 5.06. In the process of metal ion detection, the composite substrate can achieve both colorimetric and fluorescence response, and the detection limit for Zn²⁺ can reach 0.281 μM. However, at the same time, the lack of the ability to recognize specific metal ions is expected to be further improved by the modification of spiropyran.

Natural deep eutectic solvent (fructose-glycine) functionalized-celite/ polyethylene glycol hydrogel nanocomposite for phosphate adsorption: Statistical analysis

The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems and water quality warranting its amputation from polluted water. This article describes the preparation of a novel natural deep eutectic solvent (NADES) functionalized-celite/polyethylene glycol hydrogel nanocomposite (NADES-Cel/PEG HNC) for adsorptive phosphate removal from water. The XRD, FTIR, SEM coupled with EDX spectroscopy, TEM, BET analysis, and pH_pzc measurement were used to characterise the prepared material. Central composite design (CCD) in response surface methodology (RSM) was used for experimental design to analyse the individual and combined impact of five operational parameters on equilibrium adsorption capacity (Q_e), and evaluate the optimal operating conditions by numerical optimization, which were obtained as: contact time (60 min), adsorbent dosage (1.0 g/L), initial [PO₄^3-] (80 mg/L), initial solution pH (3.5), and temperature (304 K). The adsorption process was best explicated via Langmuir adsorption isotherm with a noteworthy saturation capacity, Q_m of 111.80 mg PO₄^3-/g at 298 K, and was favourable (S* = 0.99), feasible (ΔG° = -7.02 kJ/mol), exothermic (ΔH° = -8.39 kJ/mol) and physical in nature. The uptake mechanism largely involved H-bonding, electrostatic interaction, n-π interaction and pore-filling. Uptake kinetics of PO₄^3- was best explicated by pseudo-second order model, and the rate-determining step involved both intraparticle and liquid film diffusion mechanisms. The admirable performance of NADES-Cel/PEG HNC was signified by its competent adsorption efficacy and effectual reusability. The pertinence of the hydrogel nanocomposite for treatment of real wastewater was tested. Hence, NADES-Cel/PEG HNC might prove to be a pragmatic adsorbent for decontamination of PO₄^3- from an aqueous environment.

Spiropyran-Merocyanine Based Photochromic Fluorescent Probes: Design, Synthesis, and Applications

Due to ever-increasing insights into their fundamental properties and photochromic behaviors, spiropyran derivatives are still a target of interest for researchers. The interswitching ability of this photochrome between the spiropyran (SP) and merocyanine (MC) isoforms under external stimuli (light, cations, anions, pH etc.) with different spectral properties as well as the protonation-deprotonation of its MC form allows researchers to use it suitably in sensing purposes by developing different colorimetric and fluorometric probes. Selective and sensitive recognition can be achieved by little modification of its SP moiety and functional groups. In this review, we emphasize the recent advancements (from 2019 to 2022) of spiropyran-merocyanine based fluorogenic and chromogenic probes for selective detection of various metal ions, anions, neutral analytes, and pH. We precisely explain their design strategies, sensing mechanisms, and biological and environmental applications. This review may accelerate the improvements in designing more advanced probes with innovative applications in the near future.