Biophysical approaches to study the dynamic process of bacterial adhesion

Controlling the Carbon-Bio Interface via Glycan Functional Adlayers for Applications in Microbial Fuel Cell Bioanodes

Surface modification of electrodes with glycans was investigated as a strategy for modulating the development of electrocatalytic biofilms for microbial fuel cell applications. Covalent attachment of phenyl-mannoside and phenyl-lactoside adlayers on graphite rod electrodes was achieved via electrochemically assisted grafting of aryldiazonium cations from solution. To test the effects of the specific bio-functionalities, modified and unmodified graphite rods were used as anodes in two-chamber microbial fuel cell devices. Devices were set up with wastewater as inoculum and acetate as nutrient and their performance, in terms of output potential (open circuit and 1 kΩ load) and peak power output, was monitored over two months. The presence of glycans was found to lead to significant differences in startup times and peak power outputs. Lactosides were found to inhibit the development of biofilms when compared to bare graphite. Mannosides were found, instead, to promote exoelectrogenic biofilm adhesion and anode colonization, a finding that is supported by quartz crystal microbalance experiments in inoculum media. These differences were observed despite both adlayers possessing thickness in the nm range and similar hydrophilic character. This suggests that specific glycan-mediated bioaffinity interactions can be leveraged to direct the development of biotic electrocatalysts in bioelectrochemical systems and microbial fuel cell devices.

Fly foregut and transmission of microbes

Two areas of research that have greatly increased in attention are: dipterans as vectors and the microbes they are capable of vectoring. Because it is the front-end of the fly that first encounters these microbes, this review focuses on the legs, mouthparts, and foregut, which includes the crop as major structures involved in dipteran vectoring ability. The legs and mouthparts are generally involved in mechanical transmission of microbes. However, the crop is involved in more than just mechanical transmission, for it is within the lumen of the crop that microbes are taken up with the meal of the fly, stored, and it is within the lumen that horizontal transmission of bacterial resistance has been demonstrated. In addition to storage of microbes, the crop is also involved in depositing the microbes via a process known as regurgitation. Various aspects of crop regulation are discussed and specific examples of crop involvement with microorganisms are discussed. The importance of biofilm and biofilm formation are presented, as well as, some physical parameters of the crop that might either facilitate or inhibit biofilm formation. Finally, there is a brief discussion of dipteran model systems for studying crop microbe interactions.

The synergistic effect of enzymatic detergents on biofilm cleaning from different surfaces

Biofilm growth is a significant source of contamination in the food industry. Enzymes are considered green countermeasures against biofilm formation in the food industry owing to their biodegradability and low toxicity. In this study, the synergistic effect of enzymes was studied against biofilm cleaning from hard surfaces. A mixed-microbial sample was sourced from a meat packaging line and biofilms were grown under high shear conditions on stainless steel and polyethylene surfaces. A model cleaning-in-place (CIP) parallel-plate flow chamber was used for firstly, the enzymatic cleaning and secondly, a disinfection step. The cleaning effectiveness was evaluated in response to different formulations containing non-foaming commercial surfactants among with amylase, protease and lipase at neutral pH. The formulation combining all three enzymes was the most effective, showing a synergy essential for the deformation of biofilm structure and consequently better disinfection of both material surfaces.

Alternative SiO2 Surface Direct MDCK Epithelial Behavior

The mechanical interactions of cells are mediated through adhesive interactions. In this study, we examined the growth, cellular behavior, and adhesion of MDCK epithelial cells on three different SiO₂ substrates: amorphous glass coverslips and the silicon oxide layers that grow on ⟨111⟩ and ⟨100⟩ wafers. While compositionally all three substrates are almost similar, differences in surface energy result in dramatic differences in epithelial cell morphology, cell-cell adhesion, cell-substrate adhesion, actin organization, and extracellular matrix (ECM) protein expression. We also observe striking differences in ECM protein binding to the various substrates due to the hydrogen bond interactions. Our results demonstrate that MDCK cells have a robust response to differences in substrates that is not obviated by nanotopography or surface composition and that a cell's response may manifest through subtle differences in surface energies of the materials. This work strongly suggests that other properties of a material other than composition and topology should be considered when interpreting and controlling interactions of cells with a substrate, whether it is synthetic or natural.

Probing the interactions of organic molecules, nanomaterials, and microbes with solid surfaces using quartz crystal microbalances: methodology, advantages, and limitations

Quartz crystal microbalances (QCMs) provide a new analytical opportunity and prospect to characterize many environmental processes at solid/liquid interfaces, thanks to their almost real-time measurement of physicochemical changes on their quartz sensor. This work reviews the applications of QCMs in probing the interactions of organic molecules, nanomaterials (NMs) and microbes with solid surfaces. These interfacial interactions are relevant to critical environmental processes such as biofilm formation, fate and transport of NMs, fouling in engineering systems and antifouling practices. The high sensitivity, real-time monitoring, and simultaneous frequency and dissipation measurements make QCM-D a unique technique that helps reveal the interaction mechanisms for the abovementioned processes (e.g., driving forces, affinity, kinetics, and the interplay between surface chemistry and solution chemistry). On the other hand, QCM measurement is nonselective and spatially-dependent. Thus, caution should be taken during data analysis and interpretation, and it is necessary to cross-validate the results using complementary information from other techniques for more quantitative and accurate interpretation. This review summarizes the general methodologies for collecting and analyzing raw QCM data, as well as for evaluating the associated uncertainties. It serves to help researchers gain deeper insights into the fundamentals and applications of QCMs, and provides new perspectives on future research directions.

Influence of Fimbriae on Bacterial Adhesion and Viscoelasticity and Correlations of the Two Properties with Biofilm Formation

The surface polymers of bacteria determine the ability of bacteria to adhere to a substrate for colonization, which is an essential step for a variety of microbial processes, such as biofilm formation and biofouling. Capsular polysaccharides and fimbriae are two major components on a bacterial surface, which are critical for mediating cell-surface interactions. Adhesion and viscoelasticity of bacteria are two major physical properties related to bacteria-surface interactions. In this study, we employed atomic force microscopy (AFM) to interrogate how the adhesion work and the viscoelasticity of a bacterial pathogen, Klebsiella pneumoniae, influence biofilm formation. To do this, the wild-type, type 3 fimbriae-deficient, and type 3 fimbriae-overexpressed K. pneumoniae strains have been investigated in an aqueous environment. The results show that the measured adhesion work is positively correlated to biofilm formation; however, the viscoelasticity is not correlated to biofilm formation. This study indicates that AFM-based adhesion measurements of bacteria can be used to evaluate the function of bacterial surface polymers in biofilm formation and to predict the ability of bacterial biofilm formation.

Detecting Bacterial Surface Organelles on Single Cells Using Optical Tweezers

Bacterial cells display a diverse array of surface organelles that are important for a range of processes such as intercellular communication, motility and adhesion leading to biofilm formation, infections, and bacterial spread. More specifically, attachment to host cells by Gram-negative bacteria are mediated by adhesion pili, which are nanometers wide and micrometers long fibrous organelles. Since these pili are significantly thinner than the wavelength of visible light, they cannot be detected using standard light microscopy techniques. At present, there is no fast and simple method available to investigate if a single cell expresses pili while keeping the cell alive for further studies. In this study, we present a method to determine the presence of pili on a single bacterium. The protocol involves imaging the bacterium to measure its size, followed by predicting the fluid drag based on its size using an analytical model, and thereafter oscillating the sample while a single bacterium is trapped by an optical tweezer to measure its effective fluid drag. Comparison between the predicted and the measured fluid drag thereby indicate the presence of pili. Herein, we verify the method using polymer coated silica microspheres and Escherichia coli bacteria expressing adhesion pili. Our protocol can in real time and within seconds assist single cell studies by distinguishing between piliated and nonpiliated bacteria.

Quartz-Crystal Microbalance (QCM) for Public Health: An Overview of Its Applications

Nanobiotechnologies, from the convergence of nanotechnology and molecular biology and postgenomics medicine, play a major role in the field of public health. This overview summarizes the potentiality of piezoelectric sensors, and in particular, of quartz-crystal microbalance (QCM), a physical nanogram-sensitive device. QCM enables the rapid, real time, on-site detection of pathogens with an enormous burden in public health, such as influenza and other respiratory viruses, hepatitis B virus (HBV), and drug-resistant bacteria, among others. Further, it allows to detect food allergens, food-borne pathogens, such as Escherichia coli and Salmonella typhimurium, and food chemical contaminants, as well as water-borne microorganisms and environmental contaminants. Moreover, QCM holds promises in early cancer detection and screening of new antiblastic drugs. Applications for monitoring biohazards, for assuring homeland security, and preventing bioterrorism are also discussed.

Role of Capsular Polysaccharides in Biofilm Formation: An AFM Nanomechanics Study

Bacteria form biofilms to facilitate colonization of biotic and abiotic surfaces, and biofilm formation on indwelling medical devices is a common cause of hospital-acquired infection. Although it is well-recognized that the exopolysaccharide capsule is one of the key bacterial components for biofilm formation, the underlying biophysical mechanism is poorly understood. In the present study, nanomechanical measurements of wild type and specific mutants of the pathogen, Klebsiella pneumoniae, were performed in situ using atomic force microscopy (AFM). Theoretical modeling of the mechanical data and static microtiter plate biofilm assays show that the organization of the capsule can influence bacterial adhesion, and thereby biofilm formation. The capsular organization is affected by the presence of type 3 fimbriae. Understanding the biophysical mechanisms for the impact of the structural organization of the bacterial polysaccharide capsule on biofilm formation will aid the development of strategies to prevent biofilm formation.

Targeting the bacteria-host interface: strategies in anti-adhesion therapy

Bacterial infections are a major cause of morbidity and mortality worldwide and are increasingly problematic to treat due to the rise in antibiotic-resistant strains. It becomes more and more challenging to develop new antimicrobials that are able to withstand the ever-increasing repertoire of bacterial resistance mechanisms. This necessitates the development of alternative approaches to prevent and treat bacterial infections. One of the first steps during bacterial infection is adhesion of the pathogen to host cells. A pathogen’s ability to colonize and invade host tissues strictly depends on this process. Thus, interference with adhesion (anti-adhesion therapy) is an efficient way to prevent or treat bacterial infections. As a basis to present different strategies to interfere with pathogen adhesion, this review briefly introduces general concepts of bacterial attachment to host cells. We further discuss advantages and disadvantages of anti-adhesion treatments and issues that are in need of improvement so as to make anti-adhesion compounds a more broadly applicable alternative to conventional antimicrobials.

Bacteria-surface interactions

The interaction of bacteria with surfaces has important implications in a range of areas, including bioenergy, biofouling, biofilm formation, and the infection of plants and animals. Many of the interactions of bacteria with surfaces produce changes in the expression of genes that influence cell morphology and behavior, including genes essential for motility and surface attachment. Despite the attention that these phenotypes have garnered, the bacterial systems used for sensing and responding to surfaces are still not well understood. An understanding of these mechanisms will guide the development of new classes of materials that inhibit and promote cell growth, and complement studies of the physiology of bacteria in contact with surfaces. Recent studies from a range of fields in science and engineering are poised to guide future investigations in this area. This review summarizes recent studies on bacteria-surface interactions, discusses mechanisms of surface sensing and consequences of cell attachment, provides an overview of surfaces that have been used in bacterial studies, and highlights unanswered questions in this field.

Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions

Staphylococcus comprises up to two-thirds of all pathogens in orthopedic implant infections and they are the principal causative agents of two major types of infection affecting bone: septic arthritis and osteomyelitis, which involve the inflammatory destruction of joint and bone. Bacterial adhesion is the first and most important step in implant infection. It is a complex process influenced by environmental factors, bacterial properties, material surface properties and by the presence of serum or tissue proteins. Properties of the substrate, such as chemical composition of the material, surface charge, hydrophobicity, surface roughness and the presence of specific proteins at the surface, are all thought to be important in the initial cell attachment process. The biofilm mode of growth of infecting bacteria on an implant surface protects the organisms from the host immune system and antibiotic therapy. The research for novel therapeutic strategies is incited by the emergence of antibiotic-resistant bacteria. This work will provide an overview of the mechanisms and factors involved in bacterial adhesion, the techniques that are currently being used studying bacterial-material interactions as well as provide insight into future directions in the field.

Characterising the structure of photosynthetic biofilms using fluid dynamic gauging

A new configuration of the fluid dynamic gauging technique for measuring soft layers on surfaces was used to monitor the growth of a cyanobacterium, Synechococcus sp. WH 5701, on stainless steel (SS), glass and an indium tin oxide (ITO) on a polyethylene terephthalate (PET) substratum. The biofilm thickness increased steadily over 4 weeks and exhibited noticeable changes in microstructure and strength. The biofilms all exhibited a two-layer structure, with a compact layer next to the substratum and a loose layer above. Biofilms on ITO or SS exhibited cohesive failure when removed by fluid shear whereas those on glass exhibited adhesive failure. The technique is able to elucidate various aspects of biofilm behaviour, as illustrated by the action of a biocide (NaOCl) on a mature biofilm.

Submicron-textured biomaterial surface reduces staphylococcal bacterial adhesion and biofilm formation

Staphylococci are among the most important pathogens causing bloodstream infections associated with implanted medical devices. Control of bacterial adhesion to material surfaces is important for prevention of biofilm formation and biomaterial-associated infections. In this study, we hypothesized that submicron (staphylococcal bacterial dimension) surface textures may reduce the bacterial adhesion via a decrease in surface area that bacteria can contact, and subsequently inhibit biofilm formation. Poly(urethane urea) films were textured with two different sizes of submicron pillars via a two-stage replication process. Adhesion of two bacterial strains (Staphylococcus epidermidis RP62A and S. aureus Newman) was assessed over a shear stress range of 0-13.2 dyn cm(-2) using a rotating disk system in physiological buffer solutions. Significant decreases in bacterial adhesion were observed on textured surfaces for both strains compared with smooth controls. Biofilm formation was further tested on surfaces incubated in solution for either 2 or 5 days and it was found that biofilm formation was dramatically inhibited on textured surfaces. The results of the approaches used in this work demonstrate that patterned surface texturing of biomaterials provides an effective means to reduce staphylococcal adhesion and biofilm formation on biomaterial surfaces, and thus to prevent biomaterial-associated infections.

Analysis of bacterial surface interactions using microfluidic systems

Modern microbiological research has increasingly focused on the interactions between bacterial cells and the surfaces that they inhabit. To this end, microfluidic devices have played a large role in enabling research of cell-surface interactions, especially surface attachment and biofilm formation. This review provides background on microfluidic devices and their use in biological systems, as well specific examples from current literature. Methods to observe and interrogate cells within microfluidic devices are described, as well as the analytical techniques that are used to collect these data.

Grading the commercial optical biosensor literature-Class of 2008: 'The Mighty Binders'

Optical biosensor technology continues to be the method of choice for label-free, real-time interaction analysis. But when it comes to improving the quality of the biosensor literature, education should be fundamental. Of the 1413 articles published in 2008, less than 30% would pass the requirements for high-school chemistry. To teach by example, we spotlight 10 papers that illustrate how to implement the technology properly. Then we grade every paper published in 2008 on a scale from A to F and outline what features make a biosensor article fabulous, middling or abysmal. To help improve the quality of published data, we focus on a few experimental, analysis and presentation mistakes that are alarmingly common. With the literature as a guide, we want to ensure that no user is left behind.

Microbial metropolis

Microorganisms can form tightly knit communities such as biofilms. Many others include marine snow, anaerobic digester granules, the ginger beer plant and bacterial colonies. This chapter is devoted to a survey of the main properties of these communities, with an emphasis on biofilms. We start with attachment to surfaces and the nature of adhesion. The growing community then forms within a matrix, generally of organic macromolecules. Inevitably the environment within such a matrix is different from that outside. Organisms respond by forming crowd-detection and response units; these quorum sensing systems act as switches between planktonic life and the dramatically altered conditions found inside microbial aggregates. The community then matures and changes and may even fail and disappear. Antimicrobial resistance is discussed as an example of multicellular behavior. The multicellular lifestyle has been modeled mathematically and responded to powerful molecular biological techniques. Latterly, microbial systems have been used as models for fundamental evolutionary processes, mostly because of their high rates of reproduction and the ease of genetic manipulation. The life of most microbes is a duality between the yin of the community and the yang of planktonic existence. Sadly far less research has been devoted to adaptation to free-living forms than in the opposite direction.