On the origin of the electrostatic surface potential of Aspergillus niger spores in acidic environments

Initial pH determines the morphological characteristics and secondary metabolite production in Aspergillus terreus and Streptomyces rimosus cocultures

The influence of the initial pH on the morphology and secondary metabolite production in cocultures and axenic cultures of Aspergillus terreus and Streptomyces rimosus was investigated. The detected secondary metabolites (6 of bacterial and 4 of fungal origin) were not found in the cultures initiated at pH values less than or equal to 4.0. The highest mean levels of oxytetracycline were recorded in S. rimosus axenic culture at pH 5.0. Initiating the axenic culture at pH 5.9 led to visibly lower product levels, yet the presence of A. terreus reduced the negative effect of non-optimal pH and led to higher oxytetracycline titer than in the corresponding S. rimosus axenic culture. The cocultivation initiated at pH 5.0 or 5.9 triggered the formation of oxidized rimocidin. The products of A. terreus were absent in the cocultures. At pH 4.0, the striking morphological differences between the coculture and the axenic cultures were recorded.

Manipulation of co-pelletization for Chlorela vulgaris harvest by treatment of Aspergillus niger spore

The co-pelletization of microalgae with filamentous fungi was a promising approach for microalgae harvest. However, the real conditions of microalgae growth limited the arbitrary optimization of co-pellets formation with filamentous fungi. Therefore, it is urgent to develop an approach to manipulate the co-pelletization through treatment of A. niger spores. In this study, Aspergillus niger and Chlorella vulgaris were used as the model species of filamentous fungi and microalgae to investigate co-pellets formation using A. niger spores after by different pH solutions treatment, swelling, snailase treatment. The importance of spore treatments on C. vulgaris harvest in sequence was claimed based on response surface methodology analysis. The pH solutions treatment, swelling, snailase treatment of A. niger spore contributed 21.0%, 10.5%, 40.7% of harvest ratio of C. vulgaris respectively, which guided the application of spore treatment into co-pelletization. Treatment of spore was showed as an efficient approach to manipulate co-pelletization for microalgae harvest in diverse microalgae condition. This results promoted the application of co-pelletization technology in microalgae harvest of various conditions.

Effects of Cationic and Anionic Surfaces on the Perpendicular and Lateral Forces and Binding of Aspergillus niger Conidia

The binding of conidia to surfaces is a prerequisite for biofouling by fungal species. In this study, Aspergillus niger subtypes 1957 and 1988 were used which produced differently shaped conidia (round or spikey respectively). Test surfaces were characterised for their surface topography, wettability, and hardness. Conidial assays included perpendicular and lateral force measurements, as well as attachment, adhesion and retention assays. Anionic surfaces were less rough (Ra 2.4 nm), less wettable (54°) and harder (0.72 GPa) than cationic surfaces (Ra 5.4 nm, 36° and 0.5 GPa, respectively). Perpendicular and lateral force assays demonstrated that both types of conidia adhered with more force to the anionic surfaces and were influenced by surface wettability. Following the binding assays, fewer A. niger 1957 and A. niger 1988 conidia bound to the anionic surface. However, surface wettability affected the density and dispersion of the conidia on the coatings, whilst clustering was affected by their spore shapes. This work demonstrated that anionic surfaces were more repulsive to A. niger 1998 spores than cationic surfaces were, but once attached, the conidia bound more firmly to the anionic surfaces. This work informs on the importance of understanding how conidia become tightly bound to surfaces, which can be used to prevent biofouling.

Unveiling the Morphostructural Plasticity of Zoonotic Sporotrichosis Fungal Strains: Possible Implications for Sporothrix brasiliensis Virulence and Pathogenicity

Sporotrichosis is a fungal infection caused by Sporothrix species, with Sporothrix brasiliensis as a prevalent pathogen in Latin America. Despite its clinical importance, the virulence factors of S. brasiliensis and their impact on the pathogenesis of sporotrichosis are still poorly understood. This study evaluated the morphostructural plasticity of S. brasiliensis, a fungus that causes sporotrichosis. Three cell surface characteristics, namely cell surface hydrophobicity, Zeta potential, and conductance, were assessed. Biofilm formation was also analyzed, with measurements taken for biomass, extracellular matrix, and metabolic activity. In addition, other potential and poorly studied characteristics correlated with virulence such as lipid bodies, chitin, and cell size were evaluated. The results revealed that the major phenotsypic features associated with fungal virulence in the studied S. brasiliensis strains were chitin, lipid bodies, and conductance. The dendrogram clustered the strains based on their overall similarity in the production of these factors. Correlation analyses showed that hydrophobicity was strongly linked to the production of biomass and extracellular matrix, while there was a weaker association between Zeta potential and size, and lipid bodies and chitin. This study provides valuable insights into the virulence factors of S. brasiliensis and their potential role in the pathogenesis of sporotrichosis.

Water-based Fe3O4 magnetic fluid-coated Aspergillus niger spores for treating liquid contaminated with Cr(VI)

The use of magnetic biosorbents for the remediation of heavy metals has attracted increasing attention due to their ease of separation and reusability. We developed a method for preparing superparamagnetic biosorbent materials using water-based magnetic fluids. Water-based magnetic fluid-spores (WMFSs) were obtained by combining water-based magnetic fluid (WMF) with Aspergillus niger spores at ratios of 0.6:1 (WMFS1), 0.8:1 (WMFS2), 1:1 (WMFS3), 1.2:1 (WMFS4), and 1.4:1 (WMFS5). A magnetic composite material was prepared from magnetic nanoparticles and spores in a ratio of 1:1 as a control. The adsorption efficiency and separation effect of WMFS3 were significantly better than those of the magnetic composite material. The morphology and structure of WMFS3 were characterized by performing transmission electron microscopy. The results showed that Fe₃O₄ magnetic particles were uniformly coated on the spore surface. The superparamagnetism of WMFS3 was tested using a vibrating sample magnetometer. At pH 2.0, the maximum adsorption capacity of WMFS3 for Cr(VI) was 105 mg/g; in the pH range of 2.0-3.0, the adsorption equilibrium time of WMFS3 was 60 min. Thus, the adsorption process conformed to the pseudo-second-order kinetic model and Freundlich isotherm. Thermodynamic studies showed that the process was spontaneous and endothermic. The adsorption mechanisms of WMF3 for Cr(VI) included electrostatic, reduction, and complexation adsorption. This biosorbent material showed excellent adsorption performance for Cr(VI) and is promising for wastewater resource applications.

Efficient Elimination of Airborne Pathogens: A Study on aerosolized Mycobacterium tuberculosis and SARS-CoV-2 using ZeBox Technology

Background

Aim

Methods

Findings

Conclusion

Recovery of Fungal Cells from Air Samples: a Tale of Loss and Gain

There are limitations in establishing a direct link between fungal exposure and health effects due to the methodology used, among other reasons. Culture methods ignore the nonviable/uncultivable fraction of airborne fungi. Molecular methods allow for a better understanding of the environmental health impacts of microbial communities. However, there are challenges when applying these techniques to bioaerosols, particularly to fungal cells. This study reveals that there is a loss of fungal cells when samples are recovered from air using wet samplers and aimed to create and test an improved protocol for concentrating mold spores via filtration prior to DNA extraction. Results obtained using the new technique showed that up to 3 orders of magnitude more fungal DNA was retrieved from the samples using quantitative PCR. A sequencing approach with MiSeq revealed a different diversity profile depending on the methodology used. Specifically, 8 fungal families out of 19 families tested were highlighted to be differentially abundant in centrifuged and filtered samples. An experiment using laboratory settings showed the same spore loss during centrifugation for Aspergillus niger and Penicillium roquefortii strains. We believe that this work helped identify and address fungal cell loss during processing of air samples, including centrifugation steps, and propose an alternative method for a more accurate evaluation of fungal exposure and diversity.IMPORTANCE This work shed light on a significant issue regarding the loss of fungal spores when recovered from air samples using liquid medium and centrifugation to concentrate air particles before DNA extraction. We provide proof that the loss affects the overall fungal diversity of aerosols and that some taxa are differentially more affected than others. Furthermore, a laboratory experiment confirmed the environmental results obtained during field sampling. The filtration protocol described in this work offers a better description of the fungal diversity of aerosols and should be used in fungal aerosol studies.

Effective Fungal Spore Inactivation with an Environmentally Friendly Approach Based on Atmospheric Pressure Air Plasma

Fungal contamination of surfaces is a global burden, posing a major environmental and public health challenge. A wide variety of antifungal chemical agents are available; however, the side effects of the use of these disinfectants often result in the generation of toxic residues raising major environmental concerns. Herein, atmospheric pressure air plasma generated by a surface barrier discharge (SBD) is presented as an innovative green chemical method for fungal inactivation, with the potential to become an effective replacement for conventional chemical disinfection agents, such as Virkon. Using Aspergillus flavus spores as a target organism, a comparison of plasma based decontamination techniques is reported, highlighting their respective efficiencies and uncovering their underpining inactivation pathways. Tests were performed using both direct gaseous plasma treatment and an indirect treatment using a plasma activated aqueous broth solution (PAB). Concentrations of gaseous ozone and nitrogen oxides were determined with Fourier-transform infrared spectroscopy (FTIR) and Optical emission spectroscopy (OES), whereas hydrogen peroxides, nitrites, nitrates, and pH were measured in PAB. It is demonstrated that direct exposure to the gaseous plasma effluent exhibited superior decontamination efficiency and eliminated spores more effectively than Virkon, a finding attributed to the production of a wide variety of reactive oxygen and nitrogen species within the plasma.

RgsD negatively controls development, toxigenesis, stress response, and virulence in Aspergillus fumigatus

The regulator of G protein signaling (RGS) domain proteins generally attenuate heterotrimeric G protein signaling, thereby fine-tune the duration and strength of signal transduction. In this study, we characterize the functions of RgsD, one of the six RGS domain proteins present in the human pathogenic fungus Aspergillus fumigatus. The deletion (Δ) of rgsD results in enhanced asexual sporulation coupled with increased mRNA levels of key developmental activators. Moreover, ΔrgsD leads to increased spore tolerance to UV and oxidative stress, which might be associated with the enhanced expression of melanin biosynthetic genes and increased amount of melanin. Yeast two-hybrid assays reveal that RgsD can interact with the three Gα proteins GpaB, GanA, and GpaA, showing the highest interaction potential with GpaB. Importantly, the ΔrgsD mutant shows elevated expression of genes in the cAMP-dependent protein kinase A (PKA) pathway and PKA catalytic activity. The ΔrgsD mutant also display increased gliotoxin production and elevated virulence toward Galleria mellonella wax moth larvae. Transcriptomic analyses using RNA-seq reveal the expression changes associated with the diverse phenotypic outcomes caused by ΔrgsD. Collectively, we conclude that RgsD attenuates cAMP-PKA signaling pathway and negatively regulates asexual development, toxigenesis, melanin production, and virulence in A. fumigatus.

Surface properties, adhesion and biofilm formation on different surfaces by Scedosporium spp. and Lomentospora prolificans

In the present work, some surface properties of the fungi Scedosporium apiospermum, S. aurantiacum, S. minutisporum, and Lomentospora prolificans and their capability to adhere to and form a biofilm on diverse surfaces were evaluated. All four species had high conidial surface hydrophobicity and elevated electronegative zeta potentials. Abundant quantities of melanin were detected at the conidial surface, whereas sialic acid was absent. The numbers of non-germinated and germinated conidia adhered to poly-L-lysine-covered slides was higher than on glass after 4 h of fungi-surface contact. Additionally, after 72 h of interaction a typical biofilm structure had formed. Mature biofilms were also observed after 72 h on a nasogastric catheter (made from polyvinyl chloride), a late bladder catheter (siliconized latex), and a nasoenteric catheter (polyurethane). Interestingly, biofilm biomass increased considerably when the catheters had previously been incubated with serum. These results confirm that Scedosporium/Lomentospora spp. are capable of forming biofilms on diverse abiotic surfaces.

Structure-function analysis and therapeutic efficacy of antibodies to fungal melanin for melanoma radioimmunotherapy

Metastatic melanoma remains difficult to treat despite recent approvals of several new drugs. Recently we reported encouraging results of Phase I clinical trial of radiolabeled with 188Re murine monoclonal IgM 6D2 to melanin in patients with Stage III/IV melanoma. Subsequently we generated a novel murine IgG 8C3 to melanin. IgGs are more amenable to humanization and cGMP (current Good Manufacturing Practice) manufacturing than IgMs. We performed comparative structural analysis of melanin-binding IgM 6D2 and IgG 8C3. The therapeutic efficacy of 213Bi- and 188Re-labeled 8C3 and its comparison with anti-CTLA4 immunotherapy was performed in B16-F10 murine melanoma model. The primary structures of these antibodies revealed significant homology, with the CDRs containing a high percentage of positively charged amino acids. The 8C3 model has a negatively charged binding surface and significant number of aromatic residues in its H3 domain, suggesting that hydrophobic interactions contribute to the antibody-melanin interaction. Radiolabeled IgG 8C3 showed significant therapeutic efficacy in murine melanoma, safety towards healthy melanin-containing tissues and favorable comparison with the anti-CTLA4 antibody. We have demonstrated that antibody binding to melanin relies on both charge and hydrophobic interactions while the in vivo data supports further development of 8C3 IgG as radioimmunotherapy reagent for metastatic melanoma.

The filamentous fungal pellet-relationship between morphology and productivity

Filamentous fungi are used for the production of a multitude of highly relevant biotechnological products like citric acid and penicillin. In submerged culture, fungi can either grow in dispersed form or as spherical pellets consisting of aggregated hyphal structures. Pellet morphology, process control and productivity are highly interlinked. On the one hand, process control in a bioreactor usually demands for compact and small pellets due to rheological issues. On the other hand, optimal productivity might be associated with less dense and larger morphology. Over the years, several publications have dealt with aforementioned relations within the confines of specific organisms and products. However, contributions which evaluate such interlinkages across several fungal species are scarce. For this purpose, we are looking into methods to manipulate fungal pellet morphology in relation to individual species and products. This review attempts to address (i) how variability of pellet morphology can be assessed and (ii) how morphology is linked to productivity. Firstly, the mechanism of pellet formation is outlined. Subsequently, the description and analysis of morphological variations are discussed to finally establish interlinkages between productivity, performance and morphology across different fungal species.

Bulk isolation of basidiospores from wild mushrooms by electrostatic attraction with low risk of microbial contaminations

The basidiospores of most Agaricomycetes are ballistospores. They are propelled off from their basidia at maturity when Buller's drop develops at high humidity at the hilar spore appendix and fuses with a liquid film formed on the adaxial side of the spore. Spores are catapulted into the free air space between hymenia and fall then out of the mushroom's cap by gravity. Here we show for 66 different species that ballistospores from mushrooms can be attracted against gravity to electrostatic charged plastic surfaces. Charges on basidiospores can influence this effect. We used this feature to selectively collect basidiospores in sterile plastic Petri-dish lids from mushrooms which were positioned upside-down onto wet paper tissues for spore release into the air. Bulks of 10⁴ to >10⁷ spores were obtained overnight in the plastic lids above the reversed fruiting bodies, between 10⁴ and 10⁶ spores already after 2-4 h incubation. In plating tests on agar medium, we rarely observed in the harvested spore solutions contaminations by other fungi (mostly none to up to in 10% of samples in different test series) and infrequently by bacteria (in between 0 and 22% of samples of test series) which could mostly be suppressed by bactericides. We thus show that it is possible to obtain clean basidiospore samples from wild mushrooms. The technique of spore collection through electrostatic attraction in plastic lids is applicable to fresh lamellate and poroid fruiting bodies from the wild, to short-lived deliquescent mushrooms, to older and dehydrating fleshy fruiting bodies, even to animal-infested mushrooms and also to dry specimens of long-lasting tough species such as Schizophyllum commune.

Characterization of the biosorption properties of dormant spores of Aspergillus niger: a potential breakthrough agent for removing Cu2+ from contaminated water

The biosorption capacity of Aspergillus niger spores for Cu²⁺ was found to be 25.3 mg g⁻¹, which was two times higher than that of its mycelium (10.1 mg g⁻¹).

Activation of Melanin Synthesis in Alternaria infectoria by Antifungal Drugs

The importance of Alternaria species fungi to human health ranges from their role as etiological agents of serious infections with poor prognoses in immunosuppressed individuals to their association with respiratory allergic diseases. The present work focuses on Alternaria infectoria, which was used as a model organism of the genus, and was designed to unravel melanin production in response to antifungals. After we characterized the pigment produced by A. infectoria, we studied the dynamics of 1,8-dihydroxynaphthalene (DHN)-melanin production during growth, the degree of melanization in response to antifungals, and how melanization affected susceptibility to several classes of therapeutic drugs. We demonstrate that A. infectoria increased melanin deposition in cell walls in response to nikkomycin Z, caspofungin, and itraconazole but not in response to fluconazole or amphotericin B. These results indicate that A. infectoria activates DHN-melanin synthesis in response to certain antifungal drugs, possibly as a protective mechanism against these drugs. Inhibition of DHN-melanin synthesis by pyroquilon resulted in a lower minimum effective concentration (MEC) of caspofungin and enhanced morphological changes (increased hyphal balloon size), characterized by thinner and less organized A. infectoria cell walls. In summary, A. infectoria synthesizes melanin in response to certain antifungal drugs, and its susceptibility is influenced by melanization, suggesting the therapeutic potential of drug combinations that affect melanin synthesis.

The filamentous fungal pellet and forces driving its formation

Filamentous fungi play an important role not only in the bio-manufacturing of value-added products, but also in bioenergy and environmental research. The bioprocess manipulation of filamentous fungi is more difficult than that of other microbial species because of their different pellet morphologies and the presence of tangled mycelia under different cultivation conditions. Fungal pellets, which have the advantages of harvest ease, low fermentation broth viscosity and high yield of some proteins, have been used for a long time. Many attempts have been made to establish the relationship between pellet and product yield using quantitative approaches. Fungal pellet formation is attributed to the combination of electrostatic interactions, hydrophobicity and specific interactions from spore wall components. Electrostatic interactions result from van der Waals forces and negative charge repulsion from carboxyl groups in the spore wall structure. Electrostatic interactions are also affected by counter-ions (cations) and the physiologic conditions of spores that modify the carboxyl groups. Fungal aggregates are promoted by the hydrophobicity generated by hydrophobins, which form a hydrophobic coat that covers the spore. The specific interactions of spore wall components contribute to spore aggregation through salt bridging. A model of spore aggregation was proposed based on these forces. Additionally, some challenges were addressed, including the limitations of research techniques, the quantitative determination of forces and the complex information of biological systems, to clarify the mechanism of fungal pellet formation.

DOPA and DHN pathway orchestrate melanin synthesis in Aspergillus species

Melanins are high molecular weight hydrophobic pigments that have been studied for their role in the virulence of fungal pathogens. We investigated the amount and type of melanin in 20 isolates of Aspergillus spp.; A. niger (n = 3), A. flavus (n = 5), A. tamarii (n = 3), A. terreus (n = 3), A. tubingensis (n = 3), A. sydowii (n = 3). Aspergillus spp. were identified by sequencing the internal transcribed spacer (ITS) region. Extraction of melanin from culture filtrate and fungal biomass was done and followed by qualitative and quantitative analysis of melanin pigment. Ultraviolet (UV), Fourier transformed infrared (FT-IR), and electron paramagnetic resonance (EPR) spectra analyses confirmed the presence of melanin. The melanin pathway was studied by analyzing the effects of inhibitors; kojic acid, tropolone, phthalide, and tricyclazole. The results indicate that in A. niger and A. tubingensis melanin was found in both culture filtrate and fungal biomass. For A. tamarii and A. flavus melanin was extracted from biomass only, whereas melanin was found only in culture filtrate for A. terreus. A negligible amount of melanin was found in A. sydowii. The maximum amount of melanin from culture filtrate and fungal biomass was found in A. niger and A. tamarrii, respectively. The DOPA (3,4-dihydroxyphenylalanine) pathway produces melanin in A. niger, A. tamarii and A. flavus, whereas the DHN (1,8-dihydroxynaphthalene) pathway produces melanin in A. tubingensis and A. terreus. It can be concluded that the amount and type of melanin in aspergilli largely differ from species to species.

Morphogenesis of Streptomyces in submerged cultures

Members of the genus Streptomyces are mycelial bacteria that undergo a complex multicellular life cycle and propagate via sporulation. Streptomycetes are important industrial microorganisms, as they produce a plethora of medically relevant natural products, including the majority of clinically important antibiotics, as well as a wide range of enzymes with industrial application. While development of Streptomyces in surface-grown cultures is well studied, relatively little is known of the parameters that determine morphogenesis in submerged cultures. Here, growth is characterized by the formation of mycelial networks and pellets. From the perspective of industrial fermentations, such mycelial growth is unattractive, as it is associated with slow growth, heterogeneous cultures, and high viscosity. Here, we review the current insights into the genetic and environmental factors that determine mycelial growth and morphology in liquid-grown cultures. The genetic factors include cell-matrix proteins and extracellular polymers, morphoproteins with specific roles in liquid-culture morphogenesis, with the SsgA-like proteins as well-studied examples, and programmed cell death. Environmental factors refer in particular to those dictated by process engineering, such as growth media and reactor set-up. These insights are then integrated to provide perspectives as to how this knowledge can be applied to improve streptomycetes for industrial applications.

Cell wall modifications during conidial maturation of the human pathogenic fungus Pseudallescheria boydii

Progress in extending the life expectancy of cystic fibrosis (CF) patients remains jeopardized by the increasing incidence of fungal respiratory infections. Pseudallescheria boydii (P. boydii), an emerging pathogen of humans, is a filamentous fungus frequently isolated from the respiratory secretions of CF patients. It is commonly believed that infection by this fungus occurs through inhalation of airborne conidia, but the mechanisms allowing the adherence of Pseudallescheria to the host epithelial cells and its escape from the host immune defenses remain largely unknown. Given that the cell wall orchestrates all these processes, we were interested in studying its dynamic changes in conidia as function of the age of cultures. We found that the surface hydrophobicity and electronegative charge of conidia increased with the age of culture. Melanin that can influence the cell surface properties, was extracted from conidia and estimated using UV-visible spectrophotometry. Cells were also directly examined and compared using electron paramagnetic resonance (EPR) that determines the production of free radicals. Consistent with the increased amount of melanin, the EPR signal intensity decreased suggesting polymerization of melanin. These results were confirmed by flow cytometry after studying the effect of melanin polymerization on the surface accessibility of mannose-containing glycoconjugates to fluorescent concanavalin A. In the absence of melanin, conidia showed a marked increase in fluorescence intensity as the age of culture increased. Using atomic force microscopy, we were unable to find rodlet-forming hydrophobins, molecules that can also affect conidial surface properties. In conclusion, the changes in surface properties and biochemical composition of the conidial wall with the age of culture highlight the process of conidial maturation. Mannose-containing glycoconjugates that are involved in immune recognition, are progressively masked by polymerization of melanin, an antioxidant that is commonly thought to allow fungal escape from the host immune defenses.

Characterization and control of fungal morphology for improved production performance in biotechnology

Filamentous fungi have been widely applied in industrial biotechnology for many decades. In submerged culture processes, they typically exhibit a complex morphological life cycle that is related to production performance--a link that is of high interest for process optimization. The fungal forms can vary from dense spherical pellets to viscous mycelia. The resulting morphology has been shown to be influenced strongly by process parameters, including power input through stirring and aeration, mass transfer characteristics, pH value, osmolality and the presence of solid micro-particles. The surface properties of fungal spores and hyphae also play a role. Due to their high industrial relevance, the past years have seen a substantial development of tools and techniques to characterize the growth of fungi and obtain quantitative estimates on their morphological properties. Based on the novel insights available from such studies, more recent studies have been aimed at the precise control of morphology, i.e., morphology engineering, to produce superior bio-processes with filamentous fungi.