Bone regeneration strategies with bone marrow stromal cells in orthopaedic surgery

Clinical management and innovation in fracture non-union

INTRODUCTION

With the introduction and continuous improvement in operative fracture fixation, even the most severe bone fractures can be treated with a high rate of successful healing. However, healing complications can occur and when healing fails over prolonged time, the outcome is termed a fracture non-union. Non-union is generally believed to develop due to inadequate fixation, underlying host-related factors, or infection. Despite the advancements in fracture fixation and infection management, there is still a clear need for earlier diagnosis, improved prediction of healing outcomes and innovation in the treatment of non-union.

AREAS COVERED

This review provides a detailed description of non-union from a clinical perspective, including the state of the art in diagnosis, treatment, and currently available biomaterials and orthobiologics.Subsequently, recent translational development from the biological, mechanical, and infection research fields are presented, including the latest in smart implants, osteoinductive materials, and in silico modeling.

EXPERT OPINION

The first challenge for future innovations is to refine and to identify new clinical factors for the proper definition, diagnosis, and treatment of non-union. However, integration of in vitro, in vivo, and in silico research will enable a comprehensive understanding of non-union causes and correlations, leading to the development of more effective treatments.

Inhibiting the "isolated island" effect in simulated bone defect repair using a hollow structural scaffold design

The treatment of bone tissue defects remains a complicated clinical challenge. Recently, the bone tissue engineering (BTE) technology has become an important therapeutic approach for bone defect repair. Researchers have improved the scaffolds, cells, and bioactive factors used in BTE through various existing bone repair material preparation strategies. However, due to insufficient vascularization, inadequate degradation, and fibrous wrapping, most BTE scaffolds impede new bone ingrowth and the reconstruction of grid-like connections in the middle and late stages of bone repair. These non-degradable scaffolds become isolated and disordered like independent "isolated islands", which leads to the failure of osteogenesis. Consequently, we hypothesized that the "island effect" prevents successful bone repair. Accordingly, we proposed a new concept of scaffold modification-osteogenesis requires a bone temporary shelter (also referred to as the empty shell osteogenesis concept). Based on this concept, we consider that designing hollow structural scaffolds is the key to mitigating the "isolated island" effect and enabling optimal bone regeneration and reconstruction.

Bone tissue regeneration by 58S bioactive glass scaffolds containing exosome: an in vivo study

Exosomes, the naturally secreted nanocarriers of cells, have recently been demonstrated to have therapeutic benefits in a variety of disease models where parent cells are not present. However, the use of exosomes in bone defect regeneration has been unusual, and little is documented about the underlying processes. In recent study we produced and characterized exosomes derived human endometrial mesenchymal stem stromal cells and 58S bioactive glass scaffolds; in following, in this research exosome loaded scaffolds synthetized and release of exosome, porosity and bioactivity of them were assessed. More over the effect of scaffolds on repair of critical-size bone defects in rat's calvaria was evaluated by histological examination and micro computed tomography (µ CT). The findings confirmed that constructed porous scaffolds consistently release exosomes; additionally, in vivo findings including Hematoxilin & Eosin staining, Immunohistochemistry, Masson's trichrome, histomorphometric analysis, and µ CT clarified that our implant has osteogenic properties. We discovered that Exo-treated scaffolds might promote osteogenesis especially compared to pure scaffolds, indicating that produced scaffolds containing exosomes could be a potential replacement in bone tissue engineering.

Actuation of Soft Thermoresponsive Hydrogels Mechanically Stimulates Osteogenesis in Human Mesenchymal Stem Cells without Biochemical Factors

Mesenchymal stem cells (MSCs) have the potential to differentiate into multiple lineages and can be harvested relatively easily from adults, making them a promising cell source for regenerative therapies. While it is well-known how to consistently differentiate MSCs into adipose, chondrogenic, and osteogenic lineages by treatment with biochemical factors, the number of studies exploring how to achieve this with mechanical signals is limited. A relatively unexplored area is the effect of cyclic forces on the MSC differentiation. Recently, our group developed a thermoresponsive N-ethyl acrylamide/N-isopropylacrylamide (NIPAM/NEAM) hydrogel supplemented with gold nanorods that are able to convert near-infrared light into heat. Using light pulses allows for local hydrogel collapse and swelling with physiologically relevant force and frequency. In this study, MSCs are cultured on this hydrogel system with a patterned surface and exposed to intermittent or continuous actuation of the hydrogel for 3 days to study the effect of actuation on MSC differentiation. First, cells are harvested from the bone marrow of three donors and tested for their MSC phenotype, meeting the following criteria: the harvested cells are adherent and demonstrate a fibroblast-like bipolar morphology. They lack the expression of CD34 and CD45 but do express CD73, CD90, and CD105. Additionally, their differentiation potential into adipogenic, chondrogenic, and osteogenic lineages is validated by the addition of standardized differentiation media. Next, MSCs are exposed to intermittent or continuous actuation, which leads to a significantly enhanced cell spreading compared to nonactuated cells. Moreover, actuation results in nuclear translocation of Runt-related transcription factor 2 and the Yes-associated protein. Together, these results indicate that cyclic mechanical stimulation on a soft, ridged substrate modulates the MSC fate commitment in the direction of osteogenesis.

Bone Marrow Stem Cells with Tissue-Engineered Scaffolds for Large Bone Segmental Defects: A Systematic Review

Critical-sized bone defects (CSBDs) represent a significant clinical challenge, stimulating researchers to seek new methods for successful bone reconstruction. The aim of this systematic review is to assess whether bone marrow stem cells (BMSCs) combined with tissue-engineered scaffolds have demonstrated improved bone regeneration in the treatment of CSBD in large preclinical animal models. A search of electronic databases (PubMed, Embase, Web of Science, and Cochrane Library) focused on in vivo large animal studies identified 10 articles according to the following inclusion criteria: (1) in vivo large animal models with segmental bone defects; (2) treatment with tissue-engineered scaffolds combined with BMSCs; (3) the presence of a control group; and (4) a minimum of a histological analysis outcome. Animal research: reporting of in Vivo Experiments guidelines were used for quality assessment, and Systematic Review Center for Laboratory animal Experimentation's risk of bias tool was used to define internal validity. The results demonstrated that tissue-engineered scaffolds, either from autografts or allografts, when combined with BMSCs provide improved bone mineralization and bone formation, including a critical role in the remodeling phase of bone healing. BMSC-seeded scaffolds showed improved biomechanical properties and microarchitecture properties of the regenerated bone when compared with untreated and scaffold-alone groups. This review highlights the efficacy of tissue engineering strategies for the repair of extensive bone defects in preclinical large-animal models. In particular, the use of mesenchymal stem cells, combined with bioscaffolds, seems to be a successful method in comparison to cell-free scaffolds.

Bibliometric and visualized analysis of 3D printing bioink in bone tissue engineering

Background: Applying 3D printed bioink to bone tissue engineering is an emerging technology for restoring bone tissue defects. This study aims to evaluate the application of 3D printing bioink in bone tissue engineering from 2010 to 2022 through bibliometric analysis, and to predict the hotspots and developing trends in this field. Methods: We retrieved publications from Web of Science from 2010 to 2022 on 8 January 2023. We examined the retrieved data using the bibliometrix package in R software, and VOSviewer and CiteSpace were used for visualizing the trends and hotspots of research on 3D printing bioink in bone tissue engineering. Results: We identified 682 articles and review articles in this field from 2010 to 2022. The journal Biomaterials ranked first in the number of articles published in this field. In 2016, an article published by Hölzl, K in the Biofabrication journal ranked first in number of citations. China ranked first in number of articles published and in single country publications (SCP), while America surpassed China to rank first in multiple country publications (MCP). In addition, a collaboration network analysis showed tight collaborations among China, America, South Korea, Netherlands, and other countries, with the top 10 major research affiliations mostly from these countries. The top 10 high-frequency words in this field are consistent with the field's research hotspots. The evolution trend of the discipline indicates that most citations come from Physics/Materials/Chemistry journals. Factorial analysis plays an intuitive role in determining research hotspots in this sphere. Keyword burst detection shows that chitosan and endothelial cells are emerging research hotspots in this field. Conclusion: This bibliometric study maps out a fundamental knowledge structure including countries, affiliations, authors, journals and keywords in this field of research from 2010 to 2022. This study fills a gap in the field of bibliometrics and provides a comprehensive perspective with broad prospects for this burgeoning research area.

Adipose-Derived Stem Cells Enhance Graft Incorporation and Mineralization in a Murine Model of Irradiated Mandibular Nonvascularized Bone Grafting

BACKGROUND

Nonvascularized bone grafting represents a practical method of mandibular reconstruction. However, the destructive effects of radiotherapy on native bone preclude the use of nonvascularized bone grafts in head and neck cancer patients. Adipose-derived stem cells have been shown to enhance bone healing and regeneration in numerous experimental models. The purpose of this study was to determine the impact of adipose-derived stem cells on nonvascularized bone graft incorporation in a murine model of irradiated mandibular reconstruction.

METHODS

Thirty isogenic rats were randomly divided into 3 groups: nonvascularized bone graft (control), radiation with nonvascularized bone graft (XRT), and radiation with nonvascularized bone graft and adipose-derived stem cells (ASC). Excluding the control group, all rats received a human-equivalent dose of radiation. All groups underwent mandibular reconstruction of a critical-sized defect with a nonvascularized bone graft from the contralateral hemimandible. After a 60-day recovery period, graft incorporation and bone mineralization were compared between groups.

RESULTS

Compared with the control group, the XRT group demonstrated significantly decreased graft incorporation (P = 0.011), bone mineral density (P = 0.005), and bone volume fraction (P = 0.001). Compared with the XRT group, the ASC group achieved a significantly increased graft incorporation (P = 0.006), bone mineral density (P = 0.005), and bone volume fraction (P = 0.013). No significant differences were identified between the control and ASC groups.

CONCLUSIONS

Adipose-derived stem cells enhance nonvascularized bone graft incorporation in the setting of human-equivalent radiation.

Injectable enzyme-catalyzed crosslinking hydrogels as BMSCs-laden tunable scaffold for osteogenic differentiation

Bone defects caused by trauma or tumor are a significant challenge in clinical practice. Hydrogel-based tissue engineering has been considered an effective strategy. This study successfully formed a series of injectable hydrogels by enzyme-catalyzed crosslinking hyaluronic acid-tyramine (HA-TA) and sodium alginate-tyramine (ALG-TA) under physiological conditions in the presence of both horseradish peroxidase and hydrogen peroxide. The morphology, mechanical properties, swelling properties, and biodegradation properties of hydrogels were investigated. The results showed that the mechanical properties, swelling properties and biodegradation of HA/ALG hydrogels varied with the precursor solution concentration. Furthermore, the proliferation and osteogenic differentiation of BMSCs within the HA/ALG hydrogels were evaluated in vitro. The results illustrated that the hydrogels could offer an excellent microenvironment for BMSCs growth and promote osteogenic differentiation. Therefore, the injectable hydrogels can be used as an effective 3 D scaffold for bone repair and regeneration.

A Novel Construct of Coral Granules-Poly-L-Lactic Acid Nanomembrane Sandwich Double Stem Cell Sheet Transplantation as Regenerative Therapy of Bone Defect Model

OBJECTIVES

We examined the use of a new approach in nanotechnology and stem cell research as regenerative therapy for bone tissue defects.

MATERIALS AND METHODS

We compared in vitro osteogenic potential of human Wharton jelly mesenchymal stem cells using coral granules and poly-L-lactic acid nanofiber according to proliferation (by cck-8 kit) and osteogenes (runt-related transcription factor 2, alkaline phosphatase, osteonectin) by quantitative reverse transcription-polymerase chain reaction, alkaline phosphatase assay, calcium measurement, and assessment of mineralization by Alizarin red and von Kossa staining. To overcome the limitations of natural coral, we made a modification by packaging the coral granules-human Wharton jelly mesenchymal stem cells by nanomembrane-human Wharton jelly mesenchymal stem cells to form sandwich double cell sheets and compared this hole with other holes (one was filled by human Wharton jelly mesenchymal stem cell suspension, and the other was filled by coral granules saturated with preinduced mesenchymal stem cells) by radiological and histopathological studies for repairing the bone gap.

RESULTS

Collagen-coated poly-L-lactic acid showed higher mRNA levels for all osteogenes (P < .001), higher alkaline phosphatase and calcium content (P < .001), and greater stainability. Our in vivo experiment showed that the holes implanted with sandwich double cell sheet-poly-L-lactic acid coral were completely filled mature compact bone. The holes implanted with human Wharton jelly mesenchymal stem cells alone were filled with immature compact bone. Holes implanted with coral granules-human Wharton jelly mesenchymal stem cells were filled with condensed connective tissue.

CONCLUSIONS

Poly-L-lactic acid nanofiber has greater osteogenic differentiating effect than the coral granules. The new approach of sDCS-PLLA-coral construct proved success for bone regeneration and repairing the bone gap and this may improve the design of tissue constructs for bone tissue regenerative therapy.

Evaluation of Mechanical Properties of Porous Chitosan/Gelatin/Polycaprolactone Bone Scaffold Prepared by Microwave Foaming Method

Bone tissue may suffer from bone injury and bone defects due to accidents or diseases. Since the demand for autologous bone and allograft tissue far exceeds the supply, bone scaffolds have taken the lead. The use of bone scaffolds is one of the measures to help heal or regenerate bone tissue. Therefore, a new bone scaffold was proposed in this study, which has a simpler preparation process and stronger performance. This study proposes bone scaffolds with an attempt to use polymers that are synthesized separately with three types of minerals as the filler using the microwave foaming method as follows. A 0.1 wt% of montmorillonite (MMT), zinc oxide (ZnO), or titanium dioxide (TiO₂) is added to chitosan (CS)/gelatin mixtures, respectively, after which sodium bicarbonate is added as a foaming agent, thereby forming porous gels. The polymer synthesized from three minerals was used as filler. The following microwave foaming method was adopted: 0.1 wt% MMT, ZnO, or TiO₂ was added to the CS/gelatin mixture, and then sodium bicarbonate was added as a foaming agent to form a porous gel. Next, porous gels and polycaprolactone were combined in a self-made mold in order to form bone scaffolds. A stereo microscope is used to observe the morphology of bone scaffolds, after which the pore size analysis, pore connectivity, swell property, porosity, and compressive strength are tested, examining the effects of the mineral type on bone scaffolds. The test results indicate that with MMT being the filler and sodium bicarbonate being the foaming agent, the resulting bone scaffolds yield a porous structure with a pore size between 120 μm and 370 μm. Besides, the incorporation of polycaprolactone also provides samples of 1MCG-P, 2MCG-P, and 5MCG-P with a certain compressive strength of 150–170 MPa. To sum up, the test results substantiate that a combination of the microwave foaming method and MMT generates a porous structure for bone scaffolds (1MCG-P, 2MCG-P, and 5MCG-P), involving a porosity of 38%, an inter-connected porous structure, and the compressive strength that exceeds 150 MPa.

Therapeutic Efficacy of Adipose-Derived Stem Cells Versus Bone Marrow Stromal Cells for Irradiated Mandibular Fracture Repair

BACKGROUND

Mesenchymal stem cells have immense potential in applications of bone healing and regeneration. However, few studies have evaluated the therapeutic efficacy of adipose-derived stem cells (ASCs) and bone marrow stromal cells (BMSCs) in irradiated bone. The purpose of this study is to compare the ability of ASCs versus BMSCs to enhance healing outcomes in a murine model of irradiated mandibular fracture repair.

METHODS

Forty-eight isogenic male Lewis rats underwent radiation therapy followed by mandibular osteotomy with intraoperative placement of either ASCs or BMSCs. Animals were killed on postoperative day 40. Mandibles were analyzed for union rate, biomechanical strength, vascularity, and mineralization. Groups were compared at P < 0.05 significance.

RESULTS

The ASC and BMSC groups demonstrated 92% and 75% union rates. Compared with the BMSC group, the ASC group demonstrated a trending increase in maximum load ( P = 0.095) on biomechanical strength analysis and a significant increase in vessel number ( P = 0.001), vessel thickness ( P = 0.035), and vessel volume fraction ( P = 0.007) on micro-computed tomography angiography analysis. No significant differences in bone mineralization were identified on micro-computed tomography analysis.

CONCLUSION

This study demonstrates the superior therapeutic efficacy of ASCs over BMSCs in irradiated fracture healing as evidenced by union rate, vascular morphometry, and a trend in biomechanical strength. We posit that the robust vascular response induced by ASCs better recapitulates the sequence and synchronicity of physiologic bone healing compared with BMSCs, thereby improving the reliability of irradiated fracture repair.

Union, complication, reintervention and failure rates of surgical techniques for large diaphyseal defects: a systematic review and meta-analysis

To understand the potential and limitations of the different available surgical techniques used to treat large, long-bone diaphyseal defects by focusing on union, complication, re-intervention, and failure rates, summarizing the pros and cons of each technique. A literature search was performed on PubMed, Web of Science, and Cochrane databases up to March 16th, 2022; Inclusion criteria were clinical studies written in English, of any level of evidence, with more than five patients, describing the treatment of diaphyseal bone defects. The primary outcome was the analysis of results in terms of primary union, complication, reintervention, and failure rate of the four major groups of techniques: bone allograft and autograft, bone transport, vascularized and non-vascularized fibular graft, and endoprosthesis. The statistical analysis was carried out according to Neyeloff et al., and the Mantel–Haenszel method was used to provide pooled rates across the studies. The influence of the various techniques on union rates, complication rates, and reintervention rates was assessed by a z test on the pooled rates with their corresponding 95% CIs. Assessment of risk of bias and quality of evidence was based on Downs and Black’s “Checklist for Measuring Quality” and Rob 2.0 tool. Certainty of yielded evidence was evaluated with the GRADE system. Seventy-four articles were included on 1781 patients treated for the reconstruction of diaphyseal bone defects, 1496 cases in the inferior limb, and 285 in the upper limb, with trauma being the main cause of bone defect. The meta-analysis identified different outcomes in terms of results and risks. Primary union, complications, and reinterventions were 75%, 26% and 23% for bone allografts and autografts, 91%, 62% and 19% for the bone transport group, and 78%, 38% and 23% for fibular grafts; mean time to union was between 7.8 and 8.9 months in all these groups. Results varied according to the different aetiologies, endoprosthesis was the best solution for tumour, although with a 22% failure rate, while trauma presented a more composite outcome, with fibular grafts providing a faster time to union (6.9 months), while cancellous and cortical-cancellous grafts caused less complications, reinterventions, and failures. The literature about this topic has overall limited quality. However, important conclusions can be made: Many options are available to treat critical-size defects of the diaphysis, but no one appears to be an optimal solution in terms of a safe, satisfactory, and long-lasting outcome. Regardless of the bone defect cause, bone transport techniques showed a better primary union rate, but bone allograft and autograft had fewer complication, reintervention, and failure rates than the other techniques. The specific lesion aetiology represents a critical aspect influencing potential and limitations and therefore the choice of the most suitable technique to address the challenging large diaphyseal defects.

Efficacy of adjuvant treatment for fracture nonunion/delayed union: a network meta-analysis of randomized controlled trials

Background

Fracture nonunion/delayed union seriously affects physical and mental health and quality of life. The aim of this study was to evaluate the relative efficacy of different adjuvant treatments for nonunion/delayed union by network meta-analysis.

Methods

A comprehensive search was performed to identify randomized controlled trials (RCTs) evaluating adjuvant treatment in the management of nonunion/delayed union. A network meta-analysis reporting on healing rate, healing time, and adverse effect (AE) outcomes was conducted to assess and compare different interventions.

Results

Thirty studies were included in the analysis. For the healing rate outcome, bone marrow aspirate (BMA) + autologous cancellous bone (ACB) was found to be significantly better than ACB alone (odds ratio: 0.12; 95% confidence interval: 0.03, 0.59). In the ranking results, BMA+ platelet-rich plasma (PRP) (96%), BMA + ACB (90%), and BMA alone (82%) showed relative advantages in the healing rate. Low-intensity pulsed ultrasonography (LIUS) intervention significantly shortened the healing time compared with ACB (SMD: -9.26; 95% CI: − 14.64, − 3.87). LIUS (100%), BMA + PRP (74%), and bone morphogenetic proteins (BMPs) (69%) have relative advantages. Compared with the control, electromagnetic field (EMF) (OR: 13.21; 95% CI: 1.58, 110.40) and extracorporeal shock wave (ESWT) (OR: 4.90; 95% CI: 1.38, 17.43) had a higher AE risk.

Conclusions

Among the current intervention strategies, BMA in combination with PRP and ACB can improve the healing rate of nonunion/delayed union. LIUS can significantly shorten the healing time. EMF and ESWT may have a high risk of AE. However, large-scale, well-designed studies are still needed to confirm the results.

Trial registration

Retrospectively registered.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05407-5.

Clinical translation of a patient-specific scaffold-guided bone regeneration concept in four cases with large long bone defects

Background

Bone defects after trauma, infection, or tumour resection present a challenge for patients and clinicians. To date, autologous bone graft (ABG) is the gold standard for bone regeneration. To address the limitations of ABG such as limited harvest volume as well as overly fast remodelling and resorption, a new treatment strategy of scaffold-guided bone regeneration (SGBR) was developed. In a well-characterized sheep model of large to extra-large tibial segmental defects, three-dimensional (3D) printed composite scaffolds have shown clinically relevant biocompatibility and osteoconductive capacity in SGBR strategies. Here, we report four challenging clinical cases with large complex posttraumatic long bone defects using patient-specific SGBR as a successful treatment.

Methods

After giving informed consent computed tomography (CT) images were used to design patient-specific biodegradable medical-grade polycaprolactone-tricalcium phosphate (mPCL-TCP, 80:20 ​wt%) scaffolds. The CT scans were segmented using Materialise Mimics to produce a defect model and the scaffold parts were designed with Autodesk Meshmixer. Scaffold prototypes were 3D-printed to validate robust clinical handling and bone defect fit. The final scaffold design was additively manufactured under Food and Drug Administration (FDA) guidelines for patient-specific and custom-made implants by Osteopore International Pte Ltd.

Results

Four patients (age: 23–42 years) with posttraumatic lower extremity large long bone defects (case 1: 4 ​cm distal femur, case 2: 10 ​cm tibia shaft, case 3: complex malunion femur, case 4: irregularly shaped defect distal tibia) are presented. After giving informed consent, the patients were treated surgically by implanting a custom-made mPCL-TCP scaffold loaded with ABG (case 2: additional application of recombinant human bone morphogenetic protein-2) harvested with the Reamer-Irrigator-Aspirator system (RIA, Synthes®). In all cases, the scaffolds matched the actual anatomical defect well and no perioperative adverse events were observed. Cases 1, 3 and 4 showed evidence of bony ingrowth into the large honeycomb pores (pores >2 ​mm) and fully interconnected scaffold architecture with indicative osseous bridges at the bony ends on the last radiographic follow-up (8–9 months after implantation). Comprehensive bone regeneration and full weight bearing were achieved in case 2 ​at follow-up 23 months after implantation.

Conclusion

This study shows the bench to bedside translation of guided bone regeneration principles into scaffold-based bone tissue engineering. The scaffold design in SGBR should have a tissue-specific morphological signature which stimulates and directs the stages from the initial host response towards the full regeneration. Thereby, the scaffolds provide a physical niche with morphology and biomaterial properties that allow cell migration, proliferation, and formation of vascularized tissue in the first one to two months, followed by functional bone formation and the capacity for physiological bone remodelling. Great design flexibility of composite scaffolds to support the one to three-year bone regeneration was observed in four patients with complex long bone defects.

The translational potential of this article

This study reports on the clinical efficacy of SGBR in the treatment of long bone defects. Moreover, it presents a comprehensive narrative of the rationale of this technology, highlighting its potential for bone regeneration treatment regimens in patients with any type of large and complex osseous defects.

Application of osteoinductive calcium phosphate ceramics in giant cell tumor of the sacrum: report of six cases

This study aimed at evaluating the possibility and effectiveness of osteoinductive bioceramics to fill the tumor cavity following the curettage of sacral giant cell tumor (GCT). Six patients (four females and two males, 25–45 years old) underwent nerve-sparing surgery, in which the tumor was treated by denosumab, preoperative arterial embolization and extensive curettage. The remaining cavity was filled with commercial osteoinductive calcium phosphate (CaP) bioceramics, whose excellent osteoinductivity was confirmed by intramuscular implantation in beagle canine. All patients were followed by computed tomography (CT) scans postoperatively. According to the modified Neer criterion, five cases obtained Type I healing status, and one case had Type II. At the latest follow-up, no graft-related complications and local recurrence were found. The CT scan indicated a median time of healing initiation of 3 months postoperatively, and the median time for relatively complete healing was 12 months. The excellent bone regenerative ability of the ceramics was also confirmed by increased CT attenuation value, blurred boundary and cortical rim rebuilding. In conclusion, osteoinductive CaP bioceramics could be an ideal biomaterial to treat the large remaining cavity following extensive curettage of sacral GCT. However, further investigation with more cases and longer follow-up was required to confirm the final clinical effect.

Rotary Jet-Spun Polycaprolactone/Hydroxyapatite and Carbon Nanotube Scaffolds Seeded with Bone Marrow Mesenchymal Stem Cells Increase Bone Neoformation

Clinically, bone tissue replacements and/or bone repair are challenging. Strategies based on well-defined combinations of osteoconductive materials and osteogenic cells are promising to improve bone regeneration but still require improvement. Herein, we combined polycaprolactone (PCL) fibers, carbon nanotubes (CNT), and hydroxyapatite (nHap) nanoparticles to develop the next generation of bone regeneration material. Fibers formed by rotary jet spinning (RJS) instead of traditional electrospinning (ES) with embedded bone marrow mesenchymal stem cells (BMMSCs) showed the best outcomes to repair rat calvarial defects after 6 weeks. To understand this, it was observed that different morphologies were formed depending on the manufacturing method used. RJS fibers presented a particular topography with rough fibers, which allowed for better cellular growth and cell spreading in vitro around and into a three-dimensional (3D) mesh, while fibers made by ES were more smooth and cellular growth was only measured on the 3D mesh surface. The fibers with incorporated nHap/CNT nanoparticles enhanced in vitro cell performance as indicated by more cellular proliferation, alkaline phosphatase activity, proliferation, and deposition of calcium. Greater bone neoformation occurred by combining three characteristics: the presence of nHap and CNT nanoparticles, the topography of the RJS fibers, and the addition of BMMSCs. RJS fibers with nanoparticles and seeded with BMMSCs showed 10 136 mm³ of bone neoformation, meaning a 10-fold increase compared to using RJS only and BMMSCs (0.853 mm³) and a 5-fold increase from using ES only (2054 mm³) after 6 weeks of implantation. Conversely, none of these approaches used individually showed any significant difference for in vivo bone neoformation, suggesting that their combination is essential for optimizing bone formation. In summary, our work generated a potential material composed of well-defined combinations of suitable scaffolds seeded with BMMSCs for enhancing numerous orthopedic tissue engineering applications.

BMP-2 Enhances Osteogenic Differentiation of Human Adipose-Derived and Dental Pulp Stem Cells in 2D and 3D In Vitro Models

Bone tissue provides support and protection to different organs and tissues. Aging and different diseases can cause a decrease in the rate of bone regeneration or incomplete healing; thus, tissue-engineered substitutes can be an acceptable alternative to traditional therapies. In the present work, we have developed an in vitro osteogenic differentiation model based on mesenchymal stem cells (MSCs), to first analyse the influence of the culture media and the origin of the cells on the efficiency of this process and secondly to extrapolate it to a 3D environment to evaluate its possible application in bone regeneration therapies. Two osteogenic culture media were used (one commercial from Stemcell Technologies and a second supplemented with dexamethasone, ascorbic acid, glycerol-2-phosphate, and BMP-2), with human cells of a mesenchymal phenotype from two different origins: adipose tissue (hADSCs) and dental pulp (hDPSCs). The expression of osteogenic markers in 2D cultures was evaluated in several culture periods by means of the immunofluorescence technique and real-time gene expression analysis, taking as reference MG-63 cells of osteogenic origin. The same strategy was extrapolated to a 3D environment of polylactic acid (PLA), with a 3% alginate hydrogel. The expression of osteogenic markers was detected in both hADSCs and hDPSCs, cultured in either 2D or 3D environments. However, the osteogenic differentiation of MSCs was obtained based on the culture medium and the cell origin used, since higher osteogenic marker levels were found when hADSCs were cultured with medium supplemented with BMP-2. Furthermore, the 3D culture used was suitable for cell survival and osteogenic induction.

Targeted activation of androgen receptor signaling in the periosteum improves bone fracture repair

Low testosterone level is an independent predictor of osteoporotic fracture in elderly men as well as increased fracture risk in men undergoing androgen deprivation. Androgens and androgen receptor (AR) actions are essential for bone development and homeostasis but their linkage to fracture repair remains unclear. Here we found that AR is highly expressed in the periosteum cells and is co-localized with a mesenchymal progenitor cell marker, paired-related homeobox protein 1 (Prrx1), during bone fracture repair. Mice lacking the AR gene in the periosteum expressing Prrx1-cre (AR^-/Y;Prrx1::Cre) but not in the chondrocytes (AR^-/Y;Col-2::Cre) exhibits reduced callus size and new bone volume. Gene expression data analysis revealed that the expression of several collagens, integrins and cell adhesion molecules were downregulated in periosteum-derived progenitor cells (PDCs) from AR^-/Y;Prrx1::Cre mice. Mechanistically, androgens-AR signaling activates the AR/ARA55/FAK complex and induces the collagen-integrin α2β1 gene expression that is required for promoting the AR-mediated PDCs migration. Using mouse cortical-defect and femoral graft transplantation models, we proved that elimination of AR in periosteum of host mice impairs fracture healing, regardless of AR existence of transplanted donor graft. While testosterone implanted scaffolds failed to complete callus bridging across the fracture gap in AR^-/Y;Prrx1::Cre mice, cell-based transplantation using DPCs re-expressing AR could lead to rescue bone repair. In conclusion, targeting androgen/AR axis in the periosteum may provide a novel therapy approach to improve fracture healing.

Optimal regenerative repair of large segmental bone defect in a goat model with osteoinductive calcium phosphate bioceramic implants

So far, how to achieve the optimal regenerative repair of large load-bearing bone defects using artificial bone grafts is a huge challenge in clinic. In this study, a strategy of combining osteoinductive biphasic calcium phosphate (BCP) bioceramic scaffolds with intramedullary nail fixation for creating stable osteogenic microenvironment was applied to repair large segmental bone defects (3.0 cm in length) in goat femur model. The material characterization results showed that the BCP scaffold had the initial compressive strength of over 2.0 MPa, and total porosity of 84%. The cell culture experiments demonstrated that the scaffold had the excellent ability to promote the proliferation and osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells (BMSCs). The in vivo results showed that the intramedullary nail fixation maintained the initial stability and structural integrity of the implants at early stage, promoting the osteogenic process both guided and induced by the BCP scaffolds. At 9 months postoperatively, good integration between the implants and host bone was observed, and a large amount of newborn bones formed, accompanying with the degradation of the material. At 18 months postoperatively, almost the complete new bone substitution in the defect area was achieved. The maximum bending strength of the repaired bone defects reached to the 100% of normal femur at 18 months post-surgery. Our results demonstrated the good potential of osteoinductive BCP bioceramics in the regenerative repair of large load-bearing bone defects. The current study could provide an effective method to treat the clinical large segmental bone defects.

•

A novel strategy of achieving regenerative repair for large segmental bone defects with osteoinductive calcium phosphate bioceramics was developed successfully.

•

The critical-sized goat femur defects (3.0 cm in length) were completely repaired by osteoinductive calcium phosphate bioceramics without using exogenous active factors or cells.

•

The current study could provide an effective method to solve the clinical problem about large load-bearing bone defect repair.

Biomimetic Methacrylated Gelatin Hydrogel Loaded With Bone Marrow Mesenchymal Stem Cells for Bone Tissue Regeneration

Large-segment bone defect caused by trauma or tumor is one of the most challenging problems in orthopedic clinics. Biomimetic materials for bone tissue engineering have developed dramatically in the past few decades. The organic combination of biomimetic materials and stem cells offers new strategies for tissue repair, and the fate of stem cells is closely related to their extracellular matrix (ECM) properties. In this study, a photocrosslinked biomimetic methacrylated gelatin (Bio-GelMA) hydrogel scaffold was prepared to simulate the physical structure and chemical composition of the natural bone extracellular matrix, providing a three-dimensional (3D) template and extracellular matrix microenvironment. Bone marrow mesenchymal stem cells (BMSCS) were encapsulated in Bio-GelMA scaffolds to examine the therapeutic effects of ECM-loaded cells in a 3D environment simulated for segmental bone defects. In vitro results showed that Bio-GelMA had good biocompatibility and sufficient mechanical properties (14.22kPa). A rat segmental bone defect model was constructed in vivo. The GelMA-BMSC suspension was added into the PDMS mold with the size of the bone defect and photocured as a scaffold. BMSC-loaded Bio-GelMA resulted in maximum and robust new bone formation compared with hydrogels alone and stem cell group. In conclusion, the bio-GelMA scaffold can be used as a cell carrier of BMSC to promote the repair of segmental bone defects and has great potential in future clinical applications.

Mechanistically Scoping Cell-Free and Cell-Dependent Artificial Scaffolds in Rebuilding Skeletal and Dental Hard Tissues

Rebuilding mineralized tissues in skeletal and dental systems remains costly and challenging. Despite numerous demands and heavy clinical burden over the world, sources of autografts, allografts, and xenografts are far limited, along with massive risks including viral infections, ethic crisis, and so on. Per such dilemma, artificial scaffolds have emerged to provide efficient alternatives. To date, cell-free biomimetic mineralization (BM) and cell-dependent scaffolds have both demonstrated promising capabilities of regenerating mineralized tissues. However, BM and cell-dependent scaffolds have distinctive mechanisms for mineral genesis, which makes them methodically, synthetically, and functionally disparate. Herein, these two strategies in regenerative dentistry and orthopedics are systematically summarized at the level of mechanisms. For BM, methodological and theoretical advances are focused upon; and meanwhile, for cell-dependent scaffolds, it is demonstrated how scaffolds orchestrate osteogenic cell fate. The summary of the experimental advances and clinical progress will endow researchers with mechanistic understandings of artificial scaffolds in rebuilding hard tissues, by which better clinical choices and research directions may be approached.

Biomimetic versus sintered macroporous calcium phosphate scaffolds enhanced bone regeneration and human mesenchymal stromal cell engraftment in calvarial defects

In contrast to sintered calcium phosphates (CaPs) commonly employed as scaffolds to deliver mesenchymal stromal cells (MSCs) targeting bone repair, low temperature setting conditions of calcium deficient hydroxyapatite (CDHA) yield biomimetic topology with high specific surface area. In this study, the healing capacity of CDHA administering MSCs to bone defects is evaluated for the first time and compared with sintered beta-tricalcium phosphate (β-TCP) constructs sharing the same interconnected macroporosity. Xeno-free expanded human bone marrow MSCs attached to the surface of the hydrophobic β-TCP constructs, while infiltrating the pores of the hydrophilic CDHA. Implantation of MSCs on CaPs for 8 weeks in calvaria defects of nude mice exhibited complete healing, with bone formation aligned along the periphery of β-TCP, and conversely distributed within the pores of CDHA. Human monocyte-osteoclast differentiation was inhibited in vitro by direct culture on CDHA compared to β-TCP biomaterials and indirectly by administration of MSC-conditioned media generated on CDHA, while MSCs increased osteoclastogenesis in both CaPs in vivo. MSC engraftment was significantly higher in CDHA constructs, and also correlated positively with bone in-growth in scaffolds. These findings demonstrate that biomimetic CDHA are favorable carriers for MSC therapies and should be explored further towards clinical bone regeneration strategies. STATEMENT OF SIGNIFICANCE: Delivery of mesenchymal stromal cells (MSCs) on calcium phosphate (CaP) biomaterials enhances reconstruction of bone defects. Traditional CaPs are produced at high temperature, but calcium deficient hydroxyapatite (CDHA) prepared at room temperature yields a surface structure more similar to native bone mineral. The objective of this study was to compare the capacity of biomimetic CDHA scaffolds with sintered β-TCP scaffolds for bone repair mediated by MSCs for the first time. In vitro, greater cell infiltration occurred in CDHA scaffolds and following 8 weeks in vivo, MSC engraftment was higher in CDHA compared to β-TCP, as was bone in-growth. These findings demonstrate the impact of material features such as surface structure, and highlight that CDHA should be explored towards clinical bone regeneration strategies.

Characteristics of Mesenchymal Stem Cells Are Independent of Bone Marrow Storage Temperatures

Mesenchymal stem cells play an important role in regenerative medicine due to their capability of self-renewal and multipotent differentiation. For research or clinical application, bone marrow aspirates are harvested during elective surgeries to isolate MSCs. If an immediate purification of the MSCs is not possible, the bone marrow must be stored. Therefore, the aim of this study was to investigate possible differences of stem cell characteristics regarding the self-renewal capability, the adipogenic, chondrogenic, and osteogenic differentiation, and the expression of surface antigens after different storage conditions of the bone marrow aspirates. Three groups were analysed: the first group was purified immediately after harvesting, the other two groups were processed after they were stored 18 to 24 hours at 22°C (room temperature) or at 4°C. Comparisons between the groups were performed using the Kruskal-Wallis test for nonparametric data. The final results showed no significant difference between the different storage conditions. Therefore, storage of bone marrow aspirates for 18 to 24 hours at room temperature or 4°C is possible without loss of stem cell characteristics.

Ex Vivo and In Vivo Analyses of Novel 3D-Printed Bone Substitute Scaffolds Incorporating Biphasic Calcium Phosphate Granules for Bone Regeneration

(1) Background: The aim of this study was examining the ex vivo and in vivo properties of a composite made from polycaprolactone (PCL) and biphasic calcium phosphate (BCP) (synprint, ScientiFY GmbH) fabricated via fused deposition modelling (FDM); (2) Methods: Scaffolds were tested ex vivo for their mechanical properties using porous and solid designs. Subcutaneous implantation model analyzed the biocompatibility of PCL + BCP and PCL scaffolds. Calvaria implantation model analyzed the osteoconductive properties of PCL and PCL + BCP scaffolds compared to BCP as control group. Established histological, histopathological and histomorphometrical methods were performed to evaluate new bone formation.; (3) Results Mechanical testing demonstrated no significant differences between PCL and PCL + BCP for both designs. Similar biocompatibility was observed subcutaneously for PCL and PCL + BCP scaffolds. In the calvaria model, new bone formation was observed for all groups with largest new bone formation in the BCP group, followed by the PCL + BCP group, and the PCL group. This finding was influenced by the initial volume of biomaterial implanted and remaining volume after 90 days. All materials showed osteoconductive properties and PCL + BCP tailored the tissue responses towards higher cellular biodegradability. Moreover, this material combination led to a reduced swelling in PCL + BCP; (4) Conclusions: Altogether, the results show that the newly developed composite is biocompatible and leads to successful osteoconductive bone regeneration. The new biomaterial combines the structural stability provided by PCL with bioactive characteristics of BCP-based BSM. 3D-printed BSM provides an integration behavior in accordance with the concept of guided bone regeneration (GBR) by directing new bone growth for proper function and restoration.

Characterization and In Vitro Evaluations of Injectable Calcium Phosphate Cement Doped with Magnesium and Strontium

Injectable calcium phosphate cement is a promising biomaterial for hard tissue repair due to its osteoinductivity, biocompatibility properties, and its use to correct defect areas involving narrow cavities with limited accessibility by the minimally invasive technique. Microwave-synthesized hydroxyapatite (HA) was used for the preparation of cement. In recent years, both magnesium and strontium calcium phosphate cements have exhibited rapid setting, improved mechanical strength, and a good resorption rate. A big step still remains to develop injectable magnesium and strontium phosphate cements with ideal self-setting properties, adequate mechanical strength, and good biocompatibility for clinical applications. In this study, both magnesium and strontium were doped with synthesized semiamorphous and crystalline hydroxyapatite (HA). The powder mixture was mixed with Na₂HPO₄, NaH₂PO₄, and a carboxymethyl cellulose (CMC) solution to develop the novel magnesium and strontium calcium phosphate cement. The setting time, physiochemical properties of hardened cement, microstructure, mechanical strength, and injectability of the prepared cement were studied. The toxicity evaluation and cell adhesion, which are necessary to identify the suitability of the material for different applications, were quantified and investigated using fibroblast cells. The setting time of cement was reduced substantially for magnesium- or strontium-doped cement by 2 min. The phase composition of the hardened cement expresses the semiamorphous or crystalline phase of HA with additives. Smooth and complete injection of cement paste was observed in semiamorphous HA-based cement. The intercellular reactive oxygen stress (ROS) of the Sr²⁺-doped cement sample showed varied degrees of toxicity to cells in terms of different concentrations. The Mg²⁺-doped cement showed significant attachment of cells after treatment at varying incubation times.

[The association of stromal mesenchymal cells with the bone substitute for the treatment of non-union of long bones, an alternative to autologous spongy grafts: a case report]

Bone is the most transplanted human tissue. Surgical interventions for bone repair are necessary for various pathologies such as nonunion, osteoporosis or osteonecrosis. Although autologous bone grafts remain the benchmark for bone regeneration, they unfortunately have a number of disadvantages: the need for a second intervention and the limited amount of tissue removed. Synthetic bone substitutes overcome some of these drawbacks, but their osteoinductive properties do not make it possible to treat significant bone losses. Cellular therapies based on mesenchymal stromal stem cells (MSC) in combination with bone substitutes may be alternatives to autologous bone grafting. It is in this context that we report the case of a patient with congenital dysplasia treated for non-union of the femur. The association of mesenchymal stem cells with bone substitute allowed us to obtain consolidation after 6 months.

Introduction of Cells into Porous Poly-l-Lactic Acid Scaffolds Using Impregnation Techniques

Porous materials containing cells-prepared via cell seeding on scaffolds or gelation of cell-containing solutions-have been widely studied to investigate tissue regeneration and three-dimensional cultures. However, these methods cannot introduce cells into porous materials that have low water absorption or scaffolds that require cytotoxic solvents or processes for their production. In this study, first, three different impregnation treatments conditions (vacuum, pressure, and vacuum pressure impregnation: VPI) were applied to cell suspensions to evaluate the effect of each treatment on cells. Following all three treatments, fibroblasts adhered to the cell culture dish and proliferated in the same manner as untreated cells, which confirmed that the three impregnation treatments did not affect cell function. Second, cells were introduced into a poly-l-lactic acid (PLA) scaffold, which has low water absorption, using the same impregnation treatments. The PLA scaffolds subjected to the three impregnation treatments that exhibited a significantly greater amount of DNA than those subjected to immersion treatments and showed increasing amounts of DNA in the order vacuum treatment > VPI treatment > pressure treatment. Furthermore, the amount of DNA in the vacuum-treated and VPI-treated PLA scaffolds increased on the first, third, and fifth days of culture, and it was confirmed that the cells introduced into the PLA scaffolds proliferated. These results suggest that vacuum and VPI treatments may be useful methods for introducing cells into porous materials.

Tricalcium phosphate and hydroxyapatite treatment for benign cavitary bone lesions: A prospective clinical trial

Benign bone tumors are surgically treated by curettage and by filling the defect using bone grafts or bone substitutes, such as hydroxyapatite crystals and tricalcium phosphate. The tricalcium phosphate mixed with hydroxyapatite, although fragile, is a good alternative with good integration. Fifteen patients with benign bone lesions were randomized in two groups surgically treated by curettage and filling of the bone defect using allograft (7 cases) or a mixture of 35% tricalcium phosphate, with 60-85% pore volume, and 65% hydroxyapatite (8 cases). After the surgery, all patients were followed up every 3 weeks until 6 months, and then at 2 months interval until one year for the clinical and radiological assessment. The average age was 35.4 years (from 18 to 54) for the allograft group and 41 years (from 22 to 58) for the patients treated with bone substitute. Eight patients were male and seven female, with relatively equal distribution between both groups. The average bone defect was relatively equal: 14 cc (4-25 cc) for the allograft group and 15.1 cc (4-33 cc) for the ceramic group (P>0.1). During the follow-up, all the lesions gradually disappeared after 12 months, with a time of healing of 18.8 weeks (15-24 weeks) for the allograft group and 20.37 weeks (15-28) for the bone substitute group. There were no significant differences regarding the clinical status and the radiological assessment after 12 months. No patient required extra pain medication after 2 weeks. No complications have been recorded. The surgical treatment of small and medium sized lytic benign tumors has good results with both types of graft that were studied. Using tricalcium phosphate mixed with hydroxyapatite as bone substitute represents a good and low cost alternative, but it is a relatively fragile material with a slower time to integrate compared to the allograft.

Recent Advances in Mechanically Loaded Human Mesenchymal Stem Cells for Bone Tissue Engineering

Large bone defects are a major health concern worldwide. The conventional bone repair techniques (e.g., bone-grafting and Masquelet techniques) have numerous drawbacks, which negatively impact their therapeutic outcomes. Therefore, there is a demand to develop an alternative bone repair approach that can address the existing drawbacks. Bone tissue engineering involving the utilization of human mesenchymal stem cells (hMSCs) has recently emerged as a key strategy for the regeneration of damaged bone tissues. However, the use of tissue-engineered bone graft for the clinical treatment of bone defects remains challenging. While the role of mechanical loading in creating a bone graft has been well explored, the effects of mechanical loading factors (e.g., loading types and regime) on clinical outcomes are poorly understood. This review summarizes the effects of mechanical loading on hMSCs for bone tissue engineering applications. First, we discuss the key assays for assessing the quality of tissue-engineered bone grafts, including specific staining, as well as gene and protein expression of osteogenic markers. Recent studies of the impact of mechanical loading on hMSCs, including compression, perfusion, vibration and stretching, along with the potential mechanotransduction signalling pathways, are subsequently reviewed. Lastly, we discuss the challenges and prospects of bone tissue engineering applications.

Combined therapy of adipose-derived stem cells and photobiomodulation on accelerated bone healing of a critical size defect in an osteoporotic rat model

We investigated the impact of human demineralized bone matrix (hDBM) plus adipose-derived stem cells (hADS) plus photobiomodulation (PBM) on a critical-sized femoral defect (CSFD) in ovariectomy induced osteoporosis in rats. There were 6 groups as follows. In group 1 (control, C), only CSFDs were created. Groups 2-6 were implanted with DBM into the CSFD (DBM-CSFD). In group 2 (S), only DBM was transplanted into the CSFD. In group 3 (S + PBM), the DBM-CSFDs were treated with PBM. In group 4, the DBM-CSFDs were treated with alendronate (S + ALN). In group 5, ADSs were seeded into DBM-CSFD (S + ADS). In group 6, ADSs were seeded into DBM-CSFD and the CSFDs were treated with PBM (S + PBM + ADS). At week eight (catabolic phase of bone repair), the S + ALN, S + PBM + ADS, S + PBM, and S + ADS groups all had significantly increased bone strength than the S group (ANOVA, p = 0.000). The S + PBM, S + PBM + ADS, and S + ADS groups had significantly increased Hounsfield unit than the S group (ANOVA, p = 0.000). ALN, ADS, and PBM significantly increased healed bone strength in an experimental model of DBM-treated CSFD in the catabolic phase of bone healing in osteoporotic rats. However, ALN alone and PBM plus ADS were superior to the other protocols.

Vascularization Strategies in the Prevention of Nonunion Formation

Delayed healing and nonunion formation are major challenges in orthopedic surgery, which require the development of novel treatment strategies. Vascularization is considered one of the major prerequisites for successful bone healing, providing an adequate nutrient supply and allowing the infiltration of progenitor cells to the fracture site. Hence, during the last decade, a considerable number of studies have focused on the evaluation of vascularization strategies to prevent or to treat nonunion formation. These involve (1) biophysical applications, (2) systemic pharmacological interventions, and (3) tissue engineering, including sophisticated scaffold materials, local growth factor delivery systems, cell-based techniques, and surgical vascularization approaches. Accumulating evidence indicates that in nonunions, these strategies are indeed capable of improving the process of bone healing. The major challenge for the future will now be the translation of these strategies into clinical practice to make them accessible for the majority of patients. If this succeeds, these vascularization strategies may markedly reduce the incidence of nonunion formation. Impact statement Delayed healing and nonunion formation are a major clinical problem in orthopedic surgery. This review provides an overview of vascularization strategies for the prevention and treatment of nonunions. The successful translation of these strategies in clinical practice is of major importance to achieve adequate bone healing.

Reconstruction of Large Skeletal Defects: Current Clinical Therapeutic Strategies and Future Directions Using 3D Printing

The healing of bone fractures is a well-orchestrated physiological process involving multiple cell types and signaling molecules interacting at the fracture site to replace and repair bone tissue without scar formation. However, when the lesion is too large, normal healing is compromised. These so-called non-union bone fractures, mostly arising due to trauma, tumor resection or disease, represent a major therapeutic challenge for orthopedic and reconstructive surgeons. In this review, we firstly present the current commonly employed surgical strategies comprising auto-, allo-, and xenograft transplantations, as well as synthetic biomaterials. Further to this, we discuss the multiple factors influencing the effectiveness of the reconstructive therapy. One essential parameter is adequate vascularization that ensures the vitality of the bone grafts thereby supporting the regeneration process, however deficient vascularization presents a frequently encountered problem in current management strategies. To address this challenge, vascularized bone grafts, including free or pedicled fibula flaps, or in situ approaches using the Masquelet induced membrane, or the patient’s body as a bioreactor, comprise feasible alternatives. Finally, we highlight future directions and novel strategies such as 3D printing and bioprinting which could overcome some of the current challenges in the field of bone defect reconstruction, with the benefit of fabricating personalized and vascularized scaffolds.

Identification of Cognitive and Social Framework of Tissue Engineering by Science Mapping Analysis

IMPACT STATEMENT

This study evaluates the cognitive structure and social behavior of tissue engineering (TE) based on a science mapping analysis. Understanding the terms and topics that play a key role in the development of TE can help administrative authorities to better plan funding. Moreover, a better knowledge of collaborative networks in TE and the identification of potential new opportunities for collaboration may enhance synergies in scientific activities to implement future approaches to therapy.

Substantial Overview on Mesenchymal Stem Cell Biological and Physical Properties as an Opportunity in Translational Medicine

Mesenchymal stem cells (MSC) have piqued worldwide interest for their extensive potential to treat a large array of clinical indications, their unique and controversial immunogenic and immune modulatory properties allowing ample discussions and debates for their possible applications. Emerging data demonstrating that the interaction of biomaterials and physical cues with MSC can guide their differentiation into specific cell lineages also provide new interesting insights for further MSC manipulation in different clinical applications. Moreover, recent discoveries of some regulatory molecules and signaling pathways in MSC niche that may regulate cell fate to distinct lineage herald breakthroughs in regenerative medicine. Although the advancement and success in the MSC field had led to an enormous increase in the amount of ongoing clinical trials, we still lack defined clinical therapeutic protocols. This review will explore the exciting opportunities offered by human and animal MSC, describing relevant biological properties of these cells in the light of the novel emerging evidence mentioned above while addressing the limitations and challenges MSC are still facing.

Biological evaluation of porous nanocomposite scaffolds based on strontium substituted β-TCP and bioactive glass: An in vitro and in vivo study

In the current study, in vitro analysis of the osteogenic potential of different scaffolds based on strontium-substituted β-TCP (Sr-TCP) and bioactive glass (BG) ceramics was conducted using rabbit bone marrow-derived mesenchymal stem cells (rBMSCs) and the osteogenic ability of the prepared Sr-TCP and BG scaffold was evaluated through alkaline phosphatase activity, mineral deposition by Alizarin red staining, and osteoblastic gene expression experiments. The obtained in vitro results revealed that among experimental Sr-TCP/BG nanocomposite scaffold samples with the composition of Sr-TCP/BG: 100/0, 50/50, 75/25, and 25/75, the 50Sr-TCP/50BG sample presented better osteoinductive properties. Therefore, the optimized 50Sr-TCP/50BG nanocomposite scaffold was chosen for further in vivo experiments. In vivo implantation of 50Sr-TCP/50BG scaffold and hydroxyapatite (HA)/TCP granules in a rabbit calvarial defect model showed slow degradation of 50Sr-TCP/50BG scaffold and high resorption rate of HA/TCP granules at 5 months' post-surgery. However, the 50Sr-TCP/50BG scaffolds loaded by mesenchymal stem cells (MSCs) were mainly replaced with new bone even at 2 months post-implantation. Based on the obtained engineering and biological results, 50Sr-TCP/50BG nanocomposite scaffold containing MSCs could be considered as a promising alternative substitute even for load-bearing bone tissue engineering applications.

Two-step stem cell therapy improves bone regeneration compared to concentrated bone marrow therapy

Adult stem cells are a promising tool to positively influence bone regeneration. Concentrated bone marrow therapy entails isolating osteoprogenitor cells during surgery with, however, only low cells yield. Two step stem cell therapy requires an additional harvesting procedure but generates high numbers of progenitor cells that facilitate osteogenic pre-differentiation. To further improve bone regeneration, stem cell therapy can be combined with growth factors from platelet rich plasma (PRP) or its lysate (PL) to potentially fostering vascularization. The aim of this study was to investigate the effects of bone marrow concentrate (BMC), osteogenic pre-differentiation of mesenchymal stromal cells (MSCs), and PL on bone regeneration and vascularization. Bone marrow from four different healthy human donors was used for either generation of BMC or for isolation of MSCs. Seventy-two mice were randomized to six groups (Control, PL, BMC, BMC + PL, pre-differentiated MSCs, pre-differentiated MSCs + PL). The influence of PL, BMC, and pre-differentiated MSCs was investigated systematically in a 2 mm femoral bone defect model. After a 6-week follow-up, the pre-differentiated MSCs + PL group showed the highest bone volume, highest grade of histological defect healing and highest number of bridged defects with measurable biomechanical stiffness. Using expanded and osteogenically pre-differentiated MSCs for treatment of a critical-size bone defect was favorable with regards to bone regeneration compared to treatment with cells from BMC. The addition of PL alone had no significant influence; therefore the role of PL for bone regeneration remains unclear. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1318-1328, 2019.

Immune Modulation by Transplanted Calcium Phosphate Biomaterials and Human Mesenchymal Stromal Cells in Bone Regeneration

A wide variety of biomaterials have been developed as both stabilizing structures for the injured bone and inducers of bone neoformation. They differ in chemical composition, shape, porosity, and mechanical properties. The most extensively employed and studied subset of bioceramics are calcium phosphate materials (CaPs). These materials, when transplanted alongside mesenchymal stem cells (MSCs), lead to ectopic (intramuscular and subcutaneous) and orthotopic bone formation in preclinical studies, and effective fracture healing in clinical trials. Human MSC transplantation in pre-clinical and clinical trials reveals very low engraftment in spite of successful clinical outcomes and their therapeutic actions are thought to be primarily through paracrine mechanisms. The beneficial role of transplanted MSC could rely on their strong immunomodulatory effect since, even without long-term engraftment, they have the ability to alter both the innate and adaptive immune response which is critical to facilitate new bone formation. This study presents the current knowledge of the immune response to the implantation of CaP biomaterials alone or in combination with MSC. In particular the central role of monocyte-derived cells, both macrophages and osteoclasts, in MSC-CaP mediated bone formation is emphasized. Biomaterial properties, such as macroporosity and surface microstructure, dictate the host response, and the ultimate bone healing cascade. Understanding intercellular communications throughout the inflammation, its resolution and the bone regeneration phase, is crucial to improve the current therapeutic strategies or develop new approaches.

Translation of a standardized manufacturing protocol for mesenchymal stromal cells: A systematic comparison of validation and manufacturing data

BACKGROUND

Many data are available on expansion protocols for mesenchymal stromal cells (MSCs) for both experimental settings and manufacturing for clinical trials. However, there is a lack of information on translation of established protocols for Good Manufacturing Practice (GMP) from validation to manufacturing for clinical application. We present the validation and translation of a standardized pre-clinical protocol for isolation and expansion of MSCs for a clinical trial for reconstitution of alveolar bone.

METHODS

Key parameters of 22 large-scale expansions of MSCs from bone marrow (BM) for validation were compared with 11 expansions manufactured for the clinical trial "Jaw bone reconstruction using a combination of autologous mesenchymal stromal cells and biomaterial prior to dental implant placement (MAXILLO1)" aimed at reconstruction of alveolar bone.

RESULTS

Despite variations of the starting material, the robust protocol led to stable performance characteristics of expanded MSCs. Manufacturing of the autologous advanced therapy medicinal product MAXILLO-1-MSC was possible, requiring 21 days for each product. Transport of BM aspirates and MSCs within 24 h was guaranteed. MSCs fulfilled quality criteria requested by the national competent authority. In one case, the delivered MSCs developed a mosaic in chromosomal finding, showing no abnormality in differentiation capacity, growth behavior or surface marker expression during long-term culture. The proportion of cells with the mosaic decreased in long-term culture and cells stopped growth after 38.4 population doublings.

CONCLUSIONS

Clinical use of freshly prepared MSCs, manufactured according to a standardized and validated protocol, is feasible for bone regeneration, even if there was a long local distance between manufacturing center and clinical site. Several parameters, such as colony forming units fibroblasts (CFU-F), percentage of CD34+ cells, cell count of mononuclear cells (MNCs) and white blood cells (WBCs), of the BM may serve as a predictive tool for the yield of MSCs and may help to avoid unnecessary costs for MSC manufacturing due to insufficient cell expansion rates.

Enhanced Osteogenesis of Bone Marrow-Derived Mesenchymal Stem Cells by a Functionalized Silk Fibroin Hydrogel for Bone Defect Repair

Silk fibroin (SF) from Bombyx mori is a promising natural material for the synthesis of biocompatible and biodegradable hydrogels for use in biomedical applications from tissue engineering to drug delivery. However, weak gelation performance and the lack of biochemical cues to trigger cell proliferation and differentiation currently significantly limit its application in these areas. Herein, a biofunctional hydrogel containing SF (2.0%) and a small peptide gelator (e.g., NapFFRGD = 1.0 wt%) is generated via cooperative molecular self-assembly. The introduction of NapFFRGD to SF is shown to significantly improve its gelation properties by lowering both its threshold gelation concentration to 2.0% and gelation time to 20 min under physiological conditions (pH = 7.4, 37 °C), as well as functionalizing the SF hydrogel with cell-adhesive motifs (e.g., RGD). Besides mediating cell adhesion, the RGD ligands incorporated within the SF-RGD gel promote the osteogenic differentiation of bone marrow-derived mesenchymal stem cells encapsulated within the gel matrix, leading to bone regeneration in a mouse calvarial defect model, compared with a blank SF gel (2.0%, pH = 7.4). This work suggests that SF could be easily tailored with bioactive peptide gelators to afford bioactive hydrogels with favorable microenvironments for tissue regeneration applications.

Bone stock reconstruction for huge bone loss using allograft-bones, bone marrow, and teriparatide in an infected total knee arthroplasty

Bone stock reconstruction using allograft-bones, bone marrow (BM), and teriparatide (TPTD) is reported. Huge and extensive bone losses occurred in the medullary cavity of the femur and tibia of a 55-year-old female rheumatoid arthritis patient with severe osteoporosis after debridement of her infected total knee arthroplasty. Because of the risks of unstable prosthetic fixation and intra-operation fracture, we first reconstructed the bone stock. Chipped allograft bones mixed with BM were implanted in the bone defects, and TPTD was administrated for the osteoporosis therapy. Good bone formation was found by computed tomography after 4 months. Bone turnover markers and bone mineral density (BMD) were increased at 6 months. We confirmed good bone formation at the re-implantation surgery. The newly formed bone harvested during the re-implantation surgery showed active osteoblast-like lining cells. TPTD is known to enhance allograft bone union, mesenchymal stem cell differentiation into osteoblasts, and BMD. This tissue engineering-based technique might be improved by the various effects of TPTD. This method without any laboratory cell culture might be a good option for bone stock reconstruction surgery in ordinary hospitals.

Bone Mesenchymal Stem Cell-Enriched β-Tricalcium Phosphate Scaffold Processed by the Screen-Enrich-Combine Circulating System Promotes Regeneration of Diaphyseal Bone Non-Union

Bone non-union after fracture, considered a therapeutic challenge for orthopedics, always needs a reversion surgery, including autograft transplantation (AGT). However, adverse events related to autograft harvest cannot be ignored. Our group designed a novel system called the bone marrow stem cell Screen-Enrich-Combine Circulating System (SECCS) by seeding mesenchymal stem cells (MSCs) into β-tricalcium phosphate (β-TCP) during surgery to thereafter rapidly process bioactive bone implantation. In this retrospective case-control study, 30 non-union patients who accepted SECCS therapy and 20 non-union patients who accepted AGT were enrolled. By SECCS therapy, the MSC-enriched β-TCP particles were implanted into the non-union gap. During the enrichment procedure, a significant proportion of MSCs were screened and enriched from bone marrow into porous β-TCP particles, and the cells possessed the capacity for three-line differentiation and were CD90⁺/CD105⁺/CD34^-/CD45^-. Approximately 82.0±10.7% of MSCs were enriched from 60 mL bone marrow without damaging cell viability, and approximately 11,444.0±6,018 MSCs were transplanted per patient. No implant-related infections occurred in any case. After 9 months of follow-up, 27 patients (90%) in the SECCS group acquired clinical union, compared with 18 patients (90%) in the AGT group (clinical union time, P = 0.064), and postoperative radiographic union score at 9 months post-operation was similar between the two groups. In conclusion, the SECCS could concentrate a large proportion of MSCs from bone marrow to acquire enough effective cells for therapy without in vitro cell culture. Bone substitutes processed by SECCS demonstrated encouraging promotion of bone regeneration and showed a satisfactory clinical curative effect for diaphyseal bone non-union, which was non-inferior to AGT.

Cytokines in umbilical cord blood-derived cellular product: a mechanistic insight into bone repair

AIM

Umbilical cord blood (UCB) finds frequent applications in regenerative medicine. We evaluated the role of cytokines present in a uniquely processed, UCB-derived cellular allograft product (UCBp).

MATERIALS & METHODS

Luminex multiplex assay and standard cell biology methods were employed.

RESULTS

Study with allografts from 33 donors identified 44 quantifiable cytokines in the UCBp derived conditioned media (CM). The UCBp-CM elevated proliferation and migration rates of mesenchymal stem cells (MSCs) and bone marrow stromal cells. Moreover, UCBp-CM induced secretion of VEGF-A and osteoprotegerin, which promoted angiogenesis of endothelial cells and positively influenced the osteogenic differentiation of MSCs, respectively.

CONCLUSION

Cytokines in UCBp stimulate cellular processes important for bone regeneration, making UCBp an excellent candidate for potential applications in orthopedic procedures like bone non-union and spinal fusion.

Injectable cartilaginous template transformed BMSCs into vascularized bone

Regeneration of alveolar bone for dental implant remains a major issue, partifcularly for patients suffering from severe bone adsorption and irregular socket trauma. Recapitulating embryological development is becoming an attractive approach for engineer organ or three-dimensional tissues from stem cells. In this study, we aimed to develop an injectable “cartilaginous” graft with adequate mechanical resistance and ideal bone remodelling potential. The cartilaginous graft was composed of a particulate decellularised cartilage matrix (PDCM), chondrogenically primed bone mesenchymal stem cell (BMSC) bricks (CB), and enriched platelet-rich plasma (P) gel. In immunodeficient mice, we found that angiogenesis occurred quickly inside PDCM-CB-P constructs after implantation, thereby improving tissue survival and bone formation. In rabbit tibia bone defects around implants, we confirmed that CBs not only transformed into bone tissue rapidly, but also significantly promoted bone remodelling and replacement of PDCM, thus realising osseointegration of dental implants within 3 months. In conclusion, CBs exhibited the potential for endochondral ossification in vivo, and application of a cartilaginous template composed of PDCM, CB, and P provided a minimally-invasive, “free material residual” approach to regenerate alveolar bone tissues in vivo. This method could have applications in peri-implant bone regeneration.

Global Tissue Engineering Trends: A Scientometric and Evolutive Study

Tissue engineering (TE) is defined as a multidisciplinary scientific discipline with the main objective to develop artificial bioengineered living tissues to regenerate damaged or lost tissues. Since its appearance in 1988, TE has globally spread to improve current therapeutic approaches, entailing a revolution in clinical practice. The aim of this study is to analyze global research trends on TE publications to realize the scenario of TE research from 1991 to 2016 by using document retrieval from Web of Science database and bibliometric analysis. Document type, language, source title, authorship, countries and filiation centers, and citation count were evaluated in 31,859 documents. Obtained results suggest a great multidisciplinary role of TE due to a wide spectrum-up to 51-of scientific research areas identified in the corpus of literature, being predominant technological disciplines as Material Sciences or Engineering, followed by biological and biomedical areas, as Cell Biology, Biotechnology, or Biochemistry. Distribution of authorship, journals, and countries revealed a clear imbalance, in which a minority is responsible for a majority of documents. Such imbalance is notorious in authorship, where a 0.3% of authors are involved in half of the whole production.

The effect of depression on fracture healing and osteoblast differentiation in rats

BACKGROUND

Depressive disorder has been proven to be associated with disturbed bone metabolism. However, the effect of depression on fracture healing still lacks evidence.

MATERIALS AND METHODS

A rat depressive model was first established by exposing the animals to chronic unpredictable stress, which was assessed using the sucrose preference test, forced swimming test, and open field test. Subsequently, the bone repairing ability was detected by micro-computed tomography and histological analysis of the femoral condyle defect rats with or without depression. To further investigate the potential mechanisms of depression on fracture healing, the osteogenic differentiation and autophagic level were compared between the bone marrow mesenchymal stem cells (BMSCs) derived from depressive and normal rats.

RESULTS

Our results showed that rats with depressive disorder significantly slowed the healing process at 4 and 8 weeks postinjury. Furthermore, the osteogenic potential and autophagy remarkably decreased in BMSCs from the depressive rats, suggesting an inherent relationship between autophagy and osteogenic differentiation. Finally, rapamycin, an autophagic agonist, significantly improved osteogenic differentiation of depressive BMSCs through autophagy activation.

CONCLUSION

The present study indicated that depression had a negative effect on fracture healing with low osteoblast differentiation of BMSCs. Also, autophagy activation in BMSCs offers a novel therapeutic target for depressive patients with poor fracture healing.

Inferior In Vivo Osteogenesis and Superior Angiogenesis of Human Adipose‐Derived Stem Cells Compared with Bone Marrow‐Derived Stem Cells Cultured in Xeno‐Free Conditions

The possibility of using adipose tissue-derived stromal cells (ATSC) as alternatives to bone marrow-derived stromal cells (BMSC) for bone repair has garnered interest due to the accessibility, high cell yield, and rapid in vitro expansion of ATSC. For clinical relevance, their bone forming potential in comparison to BMSC must be proven. Distinct differences between ATSC and BMSC have been observed in vitro and comparison of osteogenic potential in vivo is not clear to date. The aim of the current study was to compare the osteogenesis of human xenofree-expanded ATSC and BMSC in vitro and in an ectopic nude mouse model of bone formation. Human MSC were implanted with biphasic calcium phosphate biomaterials in subcutis pockets for 8 weeks. Implant groups were: BMSC, ATSC, BMSC and ATSC mixed together in different ratios, as well as MSC primed with either osteogenic supplements (250 μM ascorbic acid, 10 mM β-glycerolphosphate, and 10 nM dexamethasone) or 50 ng/ml recombinant bone morphogenetic protein 4 prior to implantation. In vitro results show osteogenic gene expression and differentiation potentials of ATSC. Despite this, ATSC failed to form ectopic bone in vivo, in stark contrast to BMSC, although osteogenic priming did impart minor osteogenesis to ATSC. Neovascularization was enhanced by ATSC compared with BMSC; however, less ATSC engrafted into the implant compared with BMSC. Therefore, in the content of bone regeneration, the advantages of ATSC over BMSC including enhanced angiogenesis, may be negated by their lack of osteogenesis and prerequisite for osteogenic differentiation prior to transplantation. Stem Cells Translational Medicine 2017;6:2160-2172.

WNT-activated bone grafts repair osteonecrotic lesions in aged animals

The Wnt pathway is a new target in bone therapeutic space. WNT proteins are potent stem cell activators and pro-osteogenic agents. Here, we gained insights into the molecular and cellular mechanisms responsible for liposome-reconstituted recombinant human WNT3A protein (L-WNT3A) efficacy to treat osteonecrotic defects. Skeletal injuries were coupled with cryoablation to create non-healing osteonecrotic defects in the diaphysis of the murine long bones. To replicate clinical therapy, osteonecrotic defects were treated with autologous bone graft, which were simulated by using bone graft material from syngeneic ACTB-eGFP-expressing mice. Control osteonecrotic defects received autografts alone; test sites received autografts treated ex vivo with L-WNT3A. In vivo µCT monitored healing over time and immunohistochemistry were used to track the fate of donor cells and assess their capacity to repair osteonecrotic defects according to age and WNT activation status. Collectively, analyses demonstrated that cells from the autograft directly contributed to repair of an osteonecrotic lesion, but this contribution diminished as the age of the donor increased. Pre-treating autografts from aged animals with L-WNT3A restored osteogenic capacity to autografts back to levels observed in autografts from young animals. A WNT therapeutic approach may therefore have utility in the treatment of osteonecrosis, especially in aged patients.