Spectrophotometric and electrical studies of charge-transfer complexes of sodium flucloxacillin with pi-acceptors

Synthesis, characterization, antimicrobial and DNA binding properties of an organic charge transfer complex obtained from pyrazole and chloranilic acid

The chemistry of an organic charge transfer complex (CT complex) between pyrazole (donor) and chloranilic acid (acceptor) has been explored in ethanol at room temperature. The synthesized complex has been characterized by various techniques such as FTIR, NMR, Single crystal X-ray diffraction and UV-visible spectroscopy. These techniques indicate that the cation and anion are joined together by the weak hydrogen bonding. This molecular framework is a result of inter N⁺-H⋯O^- bonding between donor and acceptor moieties. The elemental analysis and FTIR spectrum of semi-crystal complex along with Job's plot indicate the formation of 2: 1 HBCT-complex. The bioorganic chemistry of the present CT complex is established well toward antimicrobial screening and DNA binding capabilities. Antimicrobial activity was screened for gram positive and gram negative bacteria and various fungi. Molecular docking shows that the CT complex binds perfectly with the B-DNA and reveals free energy of binding (FEB) value of -198.4 kcal mol^-1. TD-DFT calculations using basis set B3LYP/6-311G^** give theoretical confirmation along with HOMO (-3.9421 eV) → LUMO (-2.4903 eV) electronic energy gap (ΔE) to be 1.4521 eV. Theoretical analysis corroborates well the biological properties.

Flucloxacillin: A Review of Characteristics, Properties and Analytical Methods

Bacterial resistance is a growing and worrying factor. The high reproducibility of these resistant microorganisms tends to influence the development of new drugs and research related to product quality control. Among the existing antimicrobials, flucloxacillin (FLU) was designed for oral and injectable administration with bactericidal activity. FLU sodium is the form used in pharmaceutical formulations. It is an antimicrobial resistant against penicillinase, an enzyme responsible for cleaving the beta-lactam ring of penicilins, which leads to inactivity of the drug. Qualitative and quantitative analyzes are essential to ensure quality of pharmaceuticals and health of the population. It is important that quality control is effective and appropriate, only then we can win the battle against microbial resistance. In this work, we want to highlight tthe characteristics of FLU as an important antibiotic and methods for the determination of FLU in pharmaceutical products and biological matrices. Among the analytical methods described in the literature for the determination of FLU, high performance liquid chromatography (HPLC) stands out. Anyway, this method uses toxic solvents (e.g. acetonitrile) long columns, which provide long runs, as well as produces large amounts of waste. Currently, the priority changed to develop ecologically correct, conscious and sustainable methods. This new view on analytical methods should be applied to FLU analyzes and used to develop and improve existing methods.

Different spectrophotometric methods applied for the analysis of binary mixture of flucloxacillin and amoxicillin: A comparative study

Three different spectrophotometric methods were applied for the quantitative analysis of flucloxacillin and amoxicillin in their binary mixture, namely, ratio subtraction, absorbance subtraction and amplitude modulation. A comparative study was done listing the advantages and the disadvantages of each method. All the methods were validated according to the ICH guidelines and the obtained accuracy, precision and repeatability were found to be within the acceptable limits. The selectivity of the proposed methods was tested using laboratory prepared mixtures and assessed by applying the standard addition technique. So, they can be used for the routine analysis of flucloxacillin and amoxicillin in their binary mixtures.

Effect of genetic algorithm as a variable selection method on different chemometric models applied for the analysis of binary mixture of amoxicillin and flucloxacillin: A comparative study

Different chemometric models were applied for the quantitative analysis of amoxicillin (AMX), and flucloxacillin (FLX) in their binary mixtures, namely, partial least squares (PLS), spectral residual augmented classical least squares (SRACLS), concentration residual augmented classical least squares (CRACLS) and artificial neural networks (ANNs). All methods were applied with and without variable selection procedure (genetic algorithm GA). The methods were used for the quantitative analysis of the drugs in laboratory prepared mixtures and real market sample via handling the UV spectral data. Robust and simpler models were obtained by applying GA. The proposed methods were found to be rapid, simple and required no preliminary separation steps.

Charge-transfer complexes of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone with amino molecules in polar solvents

The charge-transfer complexes have scientific relevance because this type of molecular interaction is at the basis of the activity of pharmacological compounds and because the absorption bands of the complexes can be used for the quantification of electron donor molecules. This work aims to assess the stability of the charge-transfer complexes between the electron acceptor 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and two drugs, procaine and atenolol, in acetonitrile and ethanol. The stability of DDQ in solution and the time required to obtain the maximum complex formation were evaluated. The stoichiometry and the stability of the complexes were determined, respectively, by Job's plot method and by the elaboration of UV-vis titrations data. The latter task was carried out by using the non-linear global analysis approach to determine the equilibrium constants. This approach to data elaboration allowed us to overcome the disadvantages of the classical linear-regression method, to obtain reliable values of the association constants and to calculate the entire spectra of the complexes. NMR spectra were recorded to identify the portion of the donor molecule that was involved in the interaction. The data support the participation of the aliphatic amino groups in complex formation and exclude the involvement of the aromatic amine present in the procaine molecule.

IR, 1H NMR, mass, XRD and TGA/DTA investigations on the ciprofloxacin/iodine charge-transfer complex

The charge-transfer complex (CTC) of ciprofloxacin drug (CIP) as a donor with iodine (I(2)) as a sigma acceptor has been studied spectrophotometrically in CHCl(3). At maximum absorption bands, the stoichiometry of CIP:iodine system was found to be 1:1 ratio according to molar ratio method. The essential spectroscopic data like formation constant (K(CT)), molar extinction coefficient (ɛ(CT)), standard free energy (ΔG°), oscillator strength (f), transition dipole moment (μ), resonance energy (R(N)) and ionization potential (I(D)) were estimated. The spectroscopic techniques such as IR, (1)H NMR, mass and UV-vis spectra and elemental analyses (CHN) as well as TG-DTG and DTA investigations were used to characterize the chelating behavior of CIP/iodine charge-transfer complex. The iodine CT interaction was associated with a presence of intermolecular hydrogen bond. The X-ray investigation was carried out to investigate the iodine doping in the synthetic CT complex.

Spectrophotometric and fluorescence quenching studies of the charge transfer complexation of (4-dimethylamino-benzylidene)-(4,6-dimethyl-pyrimidin-2-yl)-amine with some organic acceptors

The interaction of organic acceptors such as tetrafluoro-1,4-benzoquinone (p-TFQ), tetrachloro-1,4-benzoquinone (p-TCQ), tetrachloro-1,2-benzoquinone (o-TCQ), tetrabromo-1,4-benzoquinone (p-TBQ), tetrabromo-1,2-benzoquinone (o-TBQ) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) with (4-dimethylamino-benzylidene)-(4,6-dimethyl-pyrimidin-2-yl)-amine (SB) as donor is studied spectrophotometrically and fluoremetrically in dichloromethane and trichloromethane. The association constant (K), thermodynamic parameters (ΔG°, ΔH° and ΔS°), oscillator strength (f), transition dipole moment (μ) and stoichiometric ratio are calculated using Benezi-Hildbrand's, Job and straight-line methods, respectively. The results reveal that the interaction between the donor and acceptors is due to π-π* transitions by the formation of radical ion pairs. The fluorescence quenching of SB with different organic acceptors is investigated. The results reveal that the fluorescence quenching obeys the static type mechanism via charge transfer complex formation in the ground state. The effect of temperature on the equilibrium constants of the CT complexes is also studied.

Electron donor-acceptor interaction of 3,4-dimethylaniline with 2,3-dicyano-1,4-naphthoquinone

The electron donor-acceptor (EDA) interaction between 2,3-dicyano-1,4-naphthoquinone (DCNQ) and 3,4-dimethylaniline (3,4-DMA) is studied in chloroform, dichloromethane and 1:1 (v/v) mixture of chloroform and dichloromethane. The rate of formation of the product was measured as a function of time using UV-vis spectrophotometer. The formation constant (K) and molar extinction coefficient (ɛ) values for the formation of EDA complex were evaluated in the temperature range of 20-35°C. The pseudo-first-order rate constant (k1) and the second-order rate constant (k2) for the disappearance of EDA complex and for the formation of product were evaluated. The activation parameters (ΔH#, ΔS# and ΔG#) of the reaction were determined by temperature dependence of rate constants using the Arrhenius plots. The effect of relative permittivity of the medium on the reaction is discussed. The observed results indicate that formation of final product proceeds through initial formation of EDA complex as an intermediate. The product of the reaction was purified by column chromatography method and identified as 3-(N-3,4-dimethyl-phenylamino)-2-cyano-1,4-naphthoquinone by elemental analysis, IR and NMR spectroscopy. On the basis of kinetic, analytical and spectroscopic results, a plausible mechanism for the formation of EDA complex and its transformation into product is proposed.

Spectroscopic studies on the interaction of cimetidine drug with biologically significant sigma- and pi-acceptors

Spectroscopic studies revealed that the interaction of cimetidine drug with electron acceptors iodine and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) resulted through the initial formation of ionic intermediate to charge transfer (CT) complex. The CT-complexes of the interactions have been characterized using UV-vis, (1)H NMR, FT-IR and GC-MS techniques. The formation of triiodide ion, I(3)(-), is further confirmed by the observation of the characteristic bands in the far IR spectrum for non-linear I(3)(-) ion with C(s) symmetry at 156 and 131cm(-1) assigned to nu(as)(I-I) and nu(s)(I-I) of the I-I bond and at 73cm(-1) due to bending delta(I(3)(-)). The rate of formation of the CT-complexes has been measured and discussed as a function of relative permittivity of solvent and temperature. The influence of relative permittivity of the medium on the rate indicated that the intermediate is more polar than the reactants and this observation was further supported by spectral studies. Based on the spectroscopic results plausible mechanisms for the interaction of the drug with the chosen acceptors were proposed and discussed and the point of attachment of the multifunctional cimetidine drug with these acceptors during the formation of CT-complex has been established.

Spectroscopic characterization of charge-transfer complexes of morpholine with chloranilic and picric acids in organic media: crystal structure of bis(morpholinium 2,4,6-trinitrocyclohexanolate)

Electron donor-acceptor interaction of morpholine (morp) with chloranilic acid (cla) and picric acid (pa) as pi-acceptors was investigated spectrophotometrically and found to form stable charge-transfer (CT) complexes (n-pi*) of [(Hmorp)(2)(cla)] and [(Hmorp)(pa)](2). The donor site involved in CT interaction is morpholine nitrogen. These complexes are easily synthesized from the reaction of morp with cla and pa within MeOH and CHCl(3) solvents, respectively. (1)HNMR, IR, elemental analyses, and UV-vis techniques characterize the two morpholinium charge-transfer complexes. Benesi-Hildebrand and its modification methods were applied to the determination of association constant (K), molar extinction coefficient (epsilon). The X-ray crystal structure was carried out for the interpretation the predict structure of the [(Hmorp)(pa)](2) complex.

A new spectrophotometric method for the determination of methyldopa

A new, simple and low cost spectrophotometric method for the determination of methyldopa in pharmaceutical preparations was developed. The method was based on the coupling of methyldopa with 2,6-dichloroquinone-4-chlorimide (DCQ). The absorbance maximum (λ max) of the resulted colored product was at 400 nm. Different buffers were used to determine the optimal pH for the reaction. About 1% w/v acetate buffer with pH 8.0 gave the optimal pH required for the reaction. Of the different solvents tried, water and ethanol were found to be the most suitable solvents. Beer's law was obeyed in concentration range of 4-20 μg/ml methyldopa. The correlation coefficient was found to be (r = 0.9975). The limit of detection and limit of quantification were 1.1 μg/ml and 3.21 μg/ml, respectively. The reaction ratio between methyldopa and DCQ was studied and found to be 1:3. The work included the study of the possible interference of hydrochlorothiazide found in combination with methyldopa tablets. The method was validated and results obtained for the assay of two different brands of methyldopa tablets were compared with the BP method (colorimetric). The repeatability and reproducibility of the developed method were evaluated and the obtained results quoted. The derivative formed as a result of the reaction of methyldopa with DCQ was isolated and its possible mechanistic pathway was suggested.

Highly sensitive and selective spectrophotometric and spectrofluorimetric methods for the determination of ropinirole hydrochloride in tablets

Three sensitive, selective, accurate spectrophotometric and spectrofluorimetric methods have been developed for the determination of ropinirole hydrochloride in tablets. The first method was based on measuring the absorbance of drug solution in methanol at 250 nm. The Beer's law was obeyed in the concentration range 2.5-24 microg ml(-1). The second method was based on the charge transfer reaction of drug, as n-electron donor with 7,7,8,8-tetracyanoquinodimethane (TCNQ), as pi-acceptor in acetonitrile to give radical anions that are measured at 842 nm. The Beer's law was obeyed in the concentration range 0.6-8 microg ml(-1). The third method was based on derivatization reaction with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in borate buffer of pH 8.5 followed by measuring the fluorescence intensity at 525 nm with excitation at 464 nm in chloroform. Beer's law was obeyed in the concentration range 0.01-1.3 microg ml(-1). The derivatization reaction product of drug with NBD-Cl was characterized by IR, 1H NMR and mass spectroscopy. The developed methods were validated. The following analytical parameters were investigated: the molar absorptivity (epsilon), limit of detection (LOD, microg ml(-1)) and limit of quantitation (LOQ, microg ml(-1)), precision, accuracy, recovery, and Sandell's sensitivity. Selectivity was validated by subjecting stock solution of ropinirole to acidic, basic, oxidative, and thermal degradation. No interference was observed from common excipients present in formulations. The proposed methods were successfully applied for determination of drug in tablets. The results of these proposed methods were compared with each other statistically.

Spectroscopic and kinetic studies on the interaction of ketoconazole and povidone drugs with DDQ

The kinetics and mechanism of the interaction between 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and ketoconazole and povidone drugs has been investigated spectroscopically. In the presence of large excess of donor, the 1:1 CT complex is transformed into a final product, which has been isolated and characterized by FT-IR and GC-MS techniques. The rate of formation of product has been measured as a function of time in different solvents at three temperatures. The thermodynamic parameters, viz. activation energy, enthalpy, entropy and free energy of activation were computed from temperature dependence of rate constants. Based on the spectro-kinetic results a plausible mechanism for the formation of the complex and its transformation into final product is presented and discussed.

Ultrasound-assisted thiocyanation of aromatic and heteroaromatic compounds using ammonium thiocyanate and DDQ

Thiocyanation of various aromatic and heteroaromatic compounds has been achieved in the presence of ammonium thiocyanate (NH(4)SCN) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in methanol solution under ultrasound irradiation. An ultrasonic probe of 24 kHz frequency has been used for this study. Whereas the use of ultrasound increases the rate of reactions compared with reactions at reflux conditions, the electron-donor ability of aromatic nucleus enhances also the rate of reaction.

DDQ-promoted thiocyanation of aromatic and heteroaromatic compounds

Thiocyanation of various aromatic and heteroaromatic compounds has been achieved using ammonium thiocyanate in the presence of 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) in methanol solution at room temperature and under reflux condition. The rate of reaction is influenced by the electron-donor ability of the aromatic nucleus.Key words: amines, DDQ, indoles, thiocyanation.

UV-vis, IR spectra and thermal studies of charge transfer complex formed between poly(amidoamine) dendrimers and iodine

The intermolecular charge-transfer (CT) complexes formed between two poly(amidoamine) dendrimers (PAMAM) from zero (D1) and second generation (D2) as donor and iodine as sigma-acceptor have been studied spectrophotometrically in the chloroform medium. The suggested structures of the solid iodine charge-transfer complexes investigated by several techniques using elemental analysis, mid infrared spectra, and thermal analysis (TGA and DTG) of the solid CT-complexes along with the photometric titration curves for the reactions. The results indicate the formation of two CT-complexes [(D1)]-I(2) and [(D2)]-2I(2) with acceptor:donor molar ratios of 1:1 and 1:2, respectively. The kinetic parameters (non-isothermal method) for their decomposition have been evaluated by graphical methods using the equations of Horowitz-Metzger (HM) and Coats-Redfern (CR).